Client pack problem
Gezzzz...... I've been on hold for the past 2 hours waiting for a MS
tech. Anyway, I'm doing a re-install of SBS 2000 on a new machine. When
I go to add the cleint license pack, I have 4 of them, 2 work fine one
ask for some sort of password and the other says I've exceed the license
that this was intended for.
Any thoughts? Or do I have to rot on hold for the rest of my life? Tag: VPN with 1 NIC on sbs Tag: 125314
difficulty deleting client computer
Please help with method for deleting computers in active
directory - even when renaming a client the server will
not allow the computer access to the network -
"Windows cannot connect to the domain, either because the
domain controller is down or otherwise unavalable, or
because your computer account was not found."
"Multiple connections to a server or shared resource by
the same user name are not allowed. Disconnect all
previous connections to the server or share resource and
try again."
Even with administrator name and priviledges I am unable
to connect a re-named computer.
I upgraded a station and rotated another computer with the
same name to another spot, but did not have them on at the
same time - deleted both old computer clients in active
directory and ran the wizard to add them both with new
names, but recieved the above errors.
Any help??
Thanks,
Paul Tag: VPN with 1 NIC on sbs Tag: 125310
Windows domain naming
Can anyone direct me as to an article or some previous threads that
discusses why it's a best practice to use domain.local as the domain name
(acme.local) even if you do own the FQDN (acme.com), and other implications
such as DNS changes, Exchange setup, etc. Tag: VPN with 1 NIC on sbs Tag: 125308
REPOST RRAS Ports Still Disappearing
The following is a transcript of some previous posts
about this problem:
Message 3 in thread
From: Joel Adams (joel@NOSPAM.chartwellfs.com)
Subject: Re: VPN Woes - Any Ideas Les?
View this article only
Newsgroups: microsoft.public.backoffice.smallbiz2000
Date: 2003-04-23 23:52:58 PST
Thanks Les, I'll give the utility you mentioned a try!
Joel
"Les Connor [SBS MVP]" <les.connor@cfiveDEL.ca> wrote in
message
news:OxWJcvfCDHA.2316@TK2MSFTNGP10.phx.gbl...
> Hi Joel,
>
> I'm unsure of the effect of uninstalling/reinstalling
from the CD, perhaps
> someone will jump in with an opinion on that.
>
> Personally, I would use control panel | add remove
programs | MS Small
> Business Server. This starts setup in 'maintenance
mode' so you can
> add/remove SBS components.
>
> If there is some problem with removing ISA, it can be
completely removed
> like this:
>
> To completely remove ISA Server 2000, run the Rmisa.exe
utility that is
> included in the ISA\I386 folder on the ISA Server 2000
CD-ROM.
>
> The reinstall ISA server via control panel etc. as
above.
>
> Here is the link to the SBS version of configure VPN,
it has a good
> step-by-step, and common misconfiguration and
troubleshooting section.
>
> http://support.microsoft.com/default.aspx?scid=kb;EN-
US;320697#4
>
> Other than the above, I don't really know what to
suggest. (other than the
> regular things that we should have done already;
binding order of nic's,
> confirm DNS settings, check event logs etc.)
>
> Losing settings on a system restart is not a problem I
have encountered
:-(.
>
>
> --
> Les Connor
> ------------------
> [SBS MVP]
>
>
>
> "Joel Adams" <joel@NOSPAM.chartwellfs.com> wrote in
message
> news:OFsMF$bCDHA.392@TK2MSFTNGP12.phx.gbl...
> > Hi Les
> >
> > Yes, Installed VPN from within ISA "allow vpn
connections" and icw to open
> > the ports.
> >
> > To un-install rras I simply disable it in services
and I uninstall isa by
> > inserting the cd and going through the setup process
again - removing isa
> > the first time and then re-installing it the second.
> >
> > Joel
> >
> >
> > "Les Connor [SBS MVP]" <les.connor@cfiveDEL.ca> wrote
in message
> > news:u3dZt5RCDHA.3008@TK2MSFTNGP11.phx.gbl...
> > > Hi Joel,
> > >
> > > When you initally configured VPN, did you do it
from within ISA ?
> > >
> > > When you reinstall/uninstall ISA and rras, how do
you do this? Do you use
> > > control panel add/remove programs > microsoft small
biz server? Or some
> > > other method.
> > >
> > > Sorry about the questions instead of answers, but I
think this informati on
> > > is needed to determine what (installation) state
the SBS suite is in
> > > presently.
> > >
> > > --
> > > Les Connor
> > > ------------------
> > > [SBS MVP]
> > >
> > >
> > >
> > > "Joel Adams" <joel@NOSPAM.chartwellfs.com> wrote in
message
> > > news:ekUwbxQCDHA.2288@TK2MSFTNGP12.phx.gbl...
> > > > Hi All
> > > >
> > > > I have an sbs200 box (2 nics with broadband) with
a really frustrating vpn
> > > > problem. I had vpn working fine when i first set
the server up, but a month
> > > > or two ago the problems started and I can't
figure out why.
> > > >
> > > > Basically, when you re-boot the server all the
ports go missing in rras and
> > > > port 1723 does not open (despite it still being
in the packet filter list).
> > > >
> > > > I have to un-install rras and isa server, re-boot
and re-install before it
> > > > will work again; its a real hassle and when i
reboot it simply happens all
> > > > over again!
> > > >
> > > > Any help anyone could give would help a very
depressed sbs'er!
> > > >
> > > > Joel
I tried all the things Les said, but still I have the ame
problem. Everything works fine, until I re-start the
server. Then, all the ports in RRAS disappear! To get
them back I have to un-install ISA, re-start the server
and re-install ISA. Each re-start of the server therefore
takes between 30 - 45 mins!
Please please can someone else give me any clues. Its
really starting to get to me!
Thanks in anticipation.
Joel Tag: VPN with 1 NIC on sbs Tag: 125283
Unable to install SBS SP1a
SERVICE PACK 1 CAN ONLY BE INSTALLED ON SMALL BUSINESS
SERVER 2000
I have this problem on a brand new installation.
HP prolinia ML350
Have reinstalled from scratch still the same problem can someone
please tell me where the service pack checkes the version?.
I dont want to deliver the system as I dont know what else might not work
with later upgrades.
Paul. Tag: VPN with 1 NIC on sbs Tag: 125273
SBS smtp connector
We seem to be having problems with our SBS 2000 email
taking sometimes a day to deliver. using pop3 and smtp
delivery - pop3 OK, but smtp problem.
Looked at exchange , server, protocols, SMTP, (Small
business smtp connentor)- properties says "An internal
DNS error caused a failure to find the remote server".
Any pointers please?
Jim Tag: VPN with 1 NIC on sbs Tag: 125262
Disk Drive Space
I have a 2k SBS that has basically run out of disk space
on the c: drive. I am trying to do what I can to clear
space until I can get additional drives. Does anyone
have any suggestions of files and locations that need to
be watched and/or can be removed. For example, where are
the service pack backup files located. Since the machine
is running fine I would like to clear up that space. Any
other suggestions?????
Thanks in advance. Tag: VPN with 1 NIC on sbs Tag: 125257
SBS Client Addon Packs
I am trying to install Client Addons Packs to my SBS 2000
Server, but when I run the Setup.exe on the floppy it
tells me that the server is not SBS 2000 and that it can
only install on a SBS Server. I know I installed SBS 2000
because those are the only Server 2000 Disks I have. Is
there a reason this is happening/way to fix it? Tag: VPN with 1 NIC on sbs Tag: 125256
Additional CAL install
I have just installed Backoffice SBS 2000 with 5 CALs and
I have 35 more licenses to install, but the license icon
in Control Panel says "Not available in Microsoft
Backoffice Small Business Server. To add client access
licenses, choose Manage Server from the Start Menu and
select About Small Business Server." I do not have a
Manager Server option in Start Menu or anywhere else that
I can find. Searches on Microsoft's Knowledge Base and
Google turned up nothing.
How do I add the licenses?
Thank-you. Tag: VPN with 1 NIC on sbs Tag: 125255
delivery status notification alert
Where do I go to change the delivery status notification
alert to send to particular email address. Tag: VPN with 1 NIC on sbs Tag: 125249
small business server must be installed as the root of the forest
I have a small network (single domain). We are trying to
upgrade by replacing our current W2k server with a new box
and SBS2000. I have installed W2k server on the new box
and have joined the domain. Now, when I try to run the SBS
setup wizard, I get the above message. The suggested
solution is to remove the server from the domain, put it
in a workgroup, and continue. Will I have any problems
later when I try to place the SBS server in the domain and
replace the old server? Is there a document or site that
will help me step through this process?
Thanks Tag: VPN with 1 NIC on sbs Tag: 125243
Trial version upgrade
The Trial Version web page
(http://www.microsoft.com/sbserver/evaluation/trial/defaul
t.asp) says the software will work for exactly 120 days
after installation. It further says "The evaluation copy
is fully upgradeable to a full, packaged product copy of
Windows Small Business Server 2003".
My questions are these:
What does it take to make this upgrade? That is. how is
it accomplished physically?
Do I have to reinstall (4 hour installations really
suck by the way) a new product or will the new
product "fix" the evaluation version so it will continue
running?
What does this full version cost? Is it the $1,499.00
price tag as shown on the "How to Buy" page? Tag: VPN with 1 NIC on sbs Tag: 125239
Event ID: 8003
I'm getting this error in the system log on SBS2000 box from and XP
workstation. The Microsoft Knowledge Base Article - 135464 has some info but
it appears to be router related. I'm pretty sure our router is just a
bridge. We are on just one subnet.
Event Type: Error
Event Source: MRxSmb
Event Category: None
Event ID: 8003
Date: 8/14/2003
Time: 11:49:33 PM
User: N/A
Computer: *Server*
Description:
The master browser has received a server announcement from the computer
OMM02 that believes that it is the master browser for the domain on
transport NetBT_Tcpip_{318D4F44-2377-4476-9D2. The master browser is
stopping or an election is being forced.
Data:
0000: 00000000 004e0003 00000000 c0001f43
0010: 00000000 00000000 00000035 00000000
0020: 00000000 00000000
*(OMM02 is an XP Pro workstation)
Thanks for any help.
Doug Tag: VPN with 1 NIC on sbs Tag: 125237
SBS2003 Pricing
Are there any knowledge on this will be priced? I have an SBS2000
server with 40 CALS.
Any ideas on how I can upgrade at the least cost?
Mark Tag: VPN with 1 NIC on sbs Tag: 125235
License problem won't go away
The product Windows NT Server is out of licenses. Use License Manager
from the Administrative Tools folder for more information on which
users are out of compliance and how many licenses should be purchased.
This is an SBS2000 server with 40 licenses installed. Asside from the
SBS server itself ther are 4 other servers and 4 workstations that
participate in the LAN.
SBS2000 server also has some systems like Trend Server Protect and
Diskkeeper that may be using licenses in the background.
This server has all service packs loaded SBS2000 SP1, Windows 2000 sp4
and all security updates released to date.
In a server that produces very clean log files, this red error is an
annoyance. Does anyone no corrective steps perhaps in the registry so
stop the errors from happening? Obviously 40 installed licenses is
extreem overkill to what s really needed.
I've pay for the licenses but can't get the errors to stop.
Much thanks for any knowledge transfer.
Mark Tag: VPN with 1 NIC on sbs Tag: 125230
open relay
My user is geting bounced message that the system said
they sent email with attahcment that contains virus, which
they verified that it was not sent from them. There was no
item in their sent box. How do i fixed this? Is this due
to open relay? How do I verify if open relay was enable on
my server?
thanks Tag: VPN with 1 NIC on sbs Tag: 125224
SBS2K Print spool location
I have a few clients that are printing to a printer on a different client's
pc.
Why does the SBS2K server spool these files thru C:\temp on the server?
This directory gets quite large at times and now it has over 15 mb with
about 10 days of files.
It does not delete them after they are printed and it won't let me delete
them either, except at certain times. I haven't figured what these times
represent, but it may be related to if the client is logged on.
This client is not connecting thru a share on the server, but straight to
the other clients pc.
How do I move this spool directory to another drive? I can't find any
reference to the spool directory.
Any ideas?
-nn Tag: VPN with 1 NIC on sbs Tag: 125220
ISA Server
Hi
I have a customer who wishes to let certain users only
access half a dozen websites. Could some kind person
point me in the right direction for info on how to do
this. I beleive I need to create a 'site and content
rule'???
Many thanks Tag: VPN with 1 NIC on sbs Tag: 125219
dcpromo "Access Denied"
I am attempting to migrate sbs 2000 onto a new server and
have how to's in hand, however when I try and promote my
new server running Win2k server to a dc within the local
domain, dcpromo wizard walks me through its steps and then
quits with the following error:
"The operation failed because: Failed to modify the
necessary properties for the machine account CTSSERVER02$
Access is Denied"
What possible security settings are keeping me from
completing the promotion?
Thanks in advance for any help.
Norman Tag: VPN with 1 NIC on sbs Tag: 125200
OWA error after installing SP1a
Prior to installing SP1a, I was able to access OWA from a remote office just
fine. But after installing SP1a, I am no longer able to access OWA from
that office. If I terminal serve into the SBS, I can then access OWA. And
even if I am at other location other than the remote office in question I
can get into OWA.
Does anyone know if the installation of SP1a does some changes in OWA.
Thanks,
Steve Corrales Tag: VPN with 1 NIC on sbs Tag: 125198
Suddenly Slow User Profiles on XP clients.
We recently had a raid card failure and had to rebuild the SBS server.
Unfortunately the backup software did not include the system state by
default so we had to manually recover the profiles by telling active
directory users which profile on the client machines to use. this worked
fabulously and most users wouldn't have had a clue the server was ever down.
However, I have 2 Windows XP clients that are still taking from 2 to 4
minutes to log onto the network. It looks like its during the profile load
stage that they seem to be hanging up for a couple of minutes.
Any ideas?
Both clients are on a 100MB switch.
I have checked and both profiles are under 400 MB's. However since the
first synchronization after the server rebuilt we went in and removed the
profile path from the active directory users profile and all other machines
are loading profiles in 10 or 20 seconds. Including my own with a 2.5 gig
profile directory.
Thanks for any help gang.
Doc Tag: VPN with 1 NIC on sbs Tag: 125193
How do I rename a domain?
I have named the domain on a new stand alone sbs 2000
server DOMAIN and realize it needs to be DOMAIN.local
How do I go about renaming the domain. The server is new
and am not worried about any data loss. Tag: VPN with 1 NIC on sbs Tag: 125191
SoBig.F
Well this has been a fun day....
Anyone having a problem with the Sobig.F virus? I found
one pc on our network that was infected, I've removed the
virus from the PC and am still getting a ton of the emails
being being sent to my public folders.
My Virus software (NAV Corp) is picking up and deleting
the attachments, but I'm still getting nearly 200 emails
per hour - so it's got to be in my network somewhere.
Any suggestions on clearing all of this up? anyone else
run into this problem lately?
Luckily Blaster was not a problem....
thanks in advance for suggestions.
david Tag: VPN with 1 NIC on sbs Tag: 125188
Account Problem help please
i Have SBS with Service Pack 3
i have administrator account and i have all permession to
connect to any computer in my network , before 3 day's i
cant access to any computer in my network from the server
machine only , from other machine the account it's working
good and the message is
\\computer name is not accessible
The account is not authorized tonlog in from this station
Plz help
thank's Tag: VPN with 1 NIC on sbs Tag: 125186
[OT] SBS Consultant needed in MD
I have a long-term client that wants to move his NT 4 network to SBS 2003
when available. I'm in Texas or I would do it for him...
Anyone local to Silver Spring, MD that would like to look at the project,
please send an email to Kevin@3NF-inc.com. Good rates and quick completion
are appreciated, as well as the ability to provide customer service and
support to him and his users after the migration is complete.
Thanks!
--
Kevin Hill
3NF Consulting
www.3nf-inc.com/NewsGroups.htm Tag: VPN with 1 NIC on sbs Tag: 125185
traveling users
Hello All,
I have win2k SBS server providing email for about 20 users. Their internet
connection, to the office where the exchange server lives, is 512k
guaranteed up and down I believe. The clients that have desktops are set up
as exchnage clients via Outlook 2k and XP. The laptop users are set up as
imap clients via outlook because they will be using a dial up connection
most of the time on the road or away from the office.
My problem starts when an imap client's mail box gets over 100mb and then
they start to get time out issues even if they have a high speed connection
at the time. If they delete some mail to get under 100mb then they do not
have a problem. Is this a limitation of the imap protocol or do I have the
client configured wrong?
Thanks,
Robert Tag: VPN with 1 NIC on sbs Tag: 125178
Client Upgrade
My client will be upgrading their entire site.
Server is currently 4.5. Will be doing a brand new installation of SBS2k
on a brand new server.
Clients are currently Windows 98. Will be purchasing brand new XPs.
Questions:
How will we move their mailboxes from old server to new? Would you suggest
creating .pst files on their old pcs then importing them to new?
Any documents you could point me to that would help me accomplish this?
Anything I should look out for? Tag: VPN with 1 NIC on sbs Tag: 125173
Logical Disk Manager Warning?
Under health monitor I have a logical disk manager warning: Started! = True
Any guidance would be appreciated.
Mike Tag: VPN with 1 NIC on sbs Tag: 125170
Only one user can use VPN at a time
Any reason why only one remote user can log on using the
VPN at a time?
In Routing and Remote Access properties - IP tab shows
Static address pool from xxx.xxx.xxx.1 to xxx.xxx.xxx.254,
254 addresses.
Any help would be great.
Dan Tag: VPN with 1 NIC on sbs Tag: 125166
SBS and email policy
How would i be able to set an email policy to restrict
users sending out mail to hotmail etc
also want to keep an eye on how many mail they
send/receive a day .. is there a log to who and where it
is being sent to and from ????
thanks Tag: VPN with 1 NIC on sbs Tag: 125164
Renaming User?
I had a user get married and I need to change the last name on her account.
Thought this would be easy. Just right-click the user and choose rename.
Dialog box pops up and I make changes there also. I go through every tab in
ADUC and change it where ever I see the old last name. I go to her user
folder under the share "Users" and change that. Seems that I am done.
I go back into ADUC in less than 1 minute and the email address on the
General tab is back to the old lastname (using first initial lastname) and
on the Email tab, it added the old email address back and set it as primary,
it also has the new lastname email. I change the General tab info and delete
the incorrect email address but it keeps coming back. What am I doing
wrong??
Rick in the Midwest Tag: VPN with 1 NIC on sbs Tag: 125157
Moved home folders - now problem accessing shares
For about 2 years we have had a Microsoft SBS 2000 server.
All data and shares have been located on this server.
We have also had a member server storing additional
accounts data. The member server is also used as the
Primary DNS server, WINS server and DHCP server.
Recently the member server's disk subsystem's capacity
was substantially increased.
We decided to move home folders from the SBS server to
the member server to alleviate some loading issues on the
SBS server and also to free up some disk space.
This change was made in two places; In Active Directory
Users and Computers, each users' accounts properties were
modified to point the home drive to the member server (H:
\\servername\sharename). Also, Group Policy was modified
to redirect 'My Documents' from the SBS server to the
member server.
After two weeks without problems, I removed the home
folder shares from the SBS server.
When users attempted to log on, some of their login
scripts did not run resulting in no network drives being
mapped. Some login scripts did run without error, but
when an attempt was made to expand a drive "Access is
denied" errors were received.
If I tried to manually map a drive using
\\servername\sharename, the resource was not found. If I
mapped using \\IP_Address\sharename, the resource was
found, but 'Access is denied' errors were returned when
trying to expand the share.
At a command prompt, net view \\servername returned no
shares. I even preloaded the netbios cache using LMHOSTS
but could not map drives using netbios names.
While testing, I configured a client with a static IP
address, and changed the DNS settings.
I eventually recreated empty home share on the SBS server
for each user, which restored functionality. However,
when clients connect via RAS I still get 'Access is
denied.' WINS, DNS, etc are configured via DHCP when the
client connects.
Question 1: Why does\did moving home shares to the member
server cause a problem once the shares were removed from
the SBS server?
Question 2: Why do I still get problems with RRAS clients?
Please help! Tag: VPN with 1 NIC on sbs Tag: 125137
Memory Leak? URGENT help needed
I am running SBS 2000 that has Service Pack 4 installed. On this box I am
running exchange.
Two nights in a row now the server has been non functioning in the morning
when staff arrive. A quick look at the event log and the application log is
full of LDAP 8031 errors and does not seem to be able to comunicate with AD.
When I checked the system log it seemed that earlier errors of 2019 Srv had
consistantly occured stating "The server was unable to allocate from the
system nonpaged pool because the pool was empty. "
Technet indicated that this is a memory leak but is resolved in Service pack
2. Can anyone offer any advice of how I can troubleshoot and resolve this
problem?
Thanks in advance
Richard Tag: VPN with 1 NIC on sbs Tag: 125128
User cannot access resources from XP Pro
Single user can't access any of the folders below the shared folder
when she logs onto XP Pro machine. So she can login OK and browse right
into the shared folder (UNC or mapped drive) however when she tries to open
a folder within the shared folder she gets "XXXX is not accessible. You
might not have permission to use this network resource. Contact the
Administrator of the server to find out if you have access permissions". She
can access the folders from another workstation no problem. Other users can
use her XP Pro machines to access all resources OK. Permissions on shared
folders and file permissions seem fine.
can ping server name (4 replies) and correct ip address is returned.
nslookup on her ip address returns correct machine name.
Any suggestions please.
--
Darwood - MCP, MCSE Tag: VPN with 1 NIC on sbs Tag: 125119
HELP - Setting up a global e-mail address in SBS 4.5.
Please could anyone help me. I need to setup a global e-
mail address in SBS 4.5 to allow me to forward incoming e-
mail for a user to an external address ie. there home
address. Someone has already set one up on our server so i
know it can be done i just cant figure out how.
Please someone help :-( Tag: VPN with 1 NIC on sbs Tag: 125112
Outlook 2000 Very Unresponsive when accessing EX2000 Mail boxes.
Dear All,
Outlook on most if not all PCs here is experiencing delays when switching
between different messages, typing in message windows i.e. you'll type a
line and half way through typing the cursor will freeze for a couple of
seconds and then carry on. It almost seems like outlook is waiting for
exchange to catchup as it were.
Its getting fairly annoying, any ideas what the cause may be? I am thinking
of trying an offline defrag of the exchange server databases.
I run a fully patched SBS2000 with dual 1Ghz Proc, 2Gb RAM, Pleanty of disk
space with 25 clients.
TIA
Jhon Tag: VPN with 1 NIC on sbs Tag: 125102
Outlook Web Access "The page cannot be found" errors
I've just bought a nice shiny new SBS 2000 server, purely
because it offers OWA. Previously I had stand alone
Outlooks with a freeware mail server running on a 7 year
old NT4 box.
So now I'm able to access my outlook from anywhere. Well
not all of the time, a lot of emails display a "The page
cannot be found" error when I double click the email. I do
a search on MS Knowledgebase and find nothing relevant
under the search terms "Outlook Web Access the page cannot
be found", so I do a google search for the same terms. I
come across several websites telling me that certain
characters are illegal in OWA, which prevents it from
displaying the page.
Now OWA is the only reason I've spent almost three
thousand pounds on new kit, and I'm being told it doesn't
work as well as my free hotmail and yahoo account which
let's me look at any emails.
Could someone please tell me whether this is actually the
case, or is something that is changeable by a registry
entry just like Outlook restricted attachments was. Tag: VPN with 1 NIC on sbs Tag: 125101
Virtual Private Nothing!
Can anybody help with the port forwarding setup on a firewall router to
allow VPN to work? Example start port end port presume they are the same,
and forward to which network card again presume second network card (WAN)
what is the port number... 47?
I have configured ISA local private network (VPN) enabled "allow vpn
connections" on ISA network configuration.
Can run VPN if ISA disabled, lost track, need a check list of some sort. any
help would be good
JB Tag: VPN with 1 NIC on sbs Tag: 125100
Email Outgoing Filtering
Sir(s),
We have a SBS 2000 network of about 50 computers. Any one, could you please
let me know, how I can configure to prevent the users to send the emails
directly and to schedule sending emails ones every one and half hours only.
This will prevent me to minimise the usage of Internet accesses in this
organization.
With best regards,
Chewang Dorji Tag: VPN with 1 NIC on sbs Tag: 125098
RAID & Small Business Server 2000
Small Business is installed, can I now add a RAID pci
card to setup a RAID configuration? Tag: VPN with 1 NIC on sbs Tag: 125097
Help - Do I Need To Re-Load
Appologies for posting this problem a second time, but
I'm on the verge of doing a complete re-load of the
Server, I would appreciate any comments as to whether I'm
doing the right thing.
The Problem - yesterday for no apparant reason the server
started to crawl whenever a connection to the internet
was made (56k dialup)
CPU usage was running at 100%, keyboard inputs to the
server took several mins to respond on screen. As soon as
web connection dropped, CPU usage returned to normal.
In the Apps log I have multiple entries showing Event ID
14079 associated with ISA with the following description
Description: Due to an unexpected error, the service
w3schdwn stopped responding to all requests. This
occurred 8 time(s) in the past 3:25 hours. Try to stop
the service or kill the corresponding process if it does
not respond, and start it again. Check the Event Viewer
for related error messages.
I have uninstalled and reinstalled ISA, but still have
the same problem.
I disabled exchange to make sure this wasn't affecting
things.
I've searched google, others have reported the same
problem, no one seems to have an answer.
I'm almost resigned to the fact that I'm going to have to
do a complete reload, (restoring exchange scares me a bit)
Am I doing the right thing, does anyone have any other
ideas, I really would appreciate any input.
Thanks ......... Andy Tag: VPN with 1 NIC on sbs Tag: 125096
Event log
Hi I am getting this message in event viewer hundreds of
times a day,The ISA Server services cannot create a packet
filter xxx.xxx.xxx.xxx.
This event occurs when there is a conflict between the
Local Address Table
(LAT) configuration and the Windows 2000 routing table.
Check the routing table
and the LAT to find the source of the conflict.
It seems that every request by a client pc to browse the
internet causes this error, however IE doesn't give any
error and does go to the requsted site.
Keith. Tag: VPN with 1 NIC on sbs Tag: 125090
POP3 Connector drops mail at security group
Hi all,
I have misconfigured a pop3 connecting to a security group mailbox
instead of a user. It took several day's to find out why the mail
didn't arrive. Now i would like to recover the misdropped mail from
the security mailbox. Can Anyone advise me on how to do this? I can't
find anything on this issue because no one does this off course, only
me ;-)
Thank you for you help.
Frank
MCP/MCSE Tag: VPN with 1 NIC on sbs Tag: 125088
pushing IE update
I've got some kind of a problem.
There is the possibility to push update on e.g. IE 5.0, but isn't there a
way to push the installation of IE 6.0?
This would certainly help me out of some problems, or at least save me work.
HC Tag: VPN with 1 NIC on sbs Tag: 125087
Wireless DSL Router
I've got SBS2000 working pretty smoothly finally. I've
got my second nic pointing at a switch and using DHCP,
all PC's on the network are finding good IP addresses.
My next problem is that I want to add my wireless router
to the network. Do I have to configure my router to have
a fixed IP address and have my second nic card look there
as my DNS server and then have the switch attached to
that?
Help!
Thanks
Rich Tag: VPN with 1 NIC on sbs Tag: 125072
exchange problems
I am having weird problems where I get e-mails half the
time but the other half of the time I do not. Just
changed the ISP from Covad To SBC with static ISP and a
Netopia router in front. worked fine before but now seems
to only allow certain senders etc. does anyone have any
thoughts Tag: VPN with 1 NIC on sbs Tag: 125056
Setup could not register OLE control DLL initpki.dll
When updating SBS 4.5 to SBS 2000 Setup could not register
OLE control DLL initpki.dll. The install stops.
Please help Tag: VPN with 1 NIC on sbs Tag: 125048
SBS2000 Server Exchange Problem
Hello,
I have been having trouble getting Exchange server packs
installed on one of my SBS2000 servers. Each time I
attempt to install the SP (be it 1, 2, or 3) it will not
allow me to install. It shows the exchange server, but
says that a exchange server must be present in order to
install the service pack and indeed the exchange server is
present on the local machine????
Thank you,
John Tag: VPN with 1 NIC on sbs Tag: 125037
Hi there,
Could you pls guide me on how to configure VPN access on
sbs 2k with one NIC, any link pls let me know.