Chris
Sat Nov 29 16:51:57 CST 2003
Vonage will not work behind ISA period. It uses a "SIP" protocol which is
not supported by ISA 2000. According to MS support the ISA 2004 will support
SIP. Thanks for the help!
"Moishe Grunstein" <max@tornado.to.nospam> wrote in message
news:eZhpJq%23rDHA.424@TK2MSFTNGP11.phx.gbl...
>
http://www.isaserver.org/tutorials/ISA_Clients__Part_2_SecureNAT_and_Web_Proxy_Client.html
>
> "Chris" <csanders@REMOVEcasnetworkservices.net> wrote in message
> news:OpIfKx3rDHA.2464@TK2MSFTNGP12.phx.gbl...
> > Then I must be misunderstanding the proper setup. Under which menu would
I
> > chhose to set this up?
> > "Moishe Grunstein" <max@tornado.to.nospam> wrote in message
> > news:OPtFRe3rDHA.3420@tk2msftngp13.phx.gbl...
> > > Server publishing rules are not needed that is for inbound requests,
> > Vonage
> > > uses outboung requests, the only way to set this up is as a secure NAT
> > > client.
> > > "Chris" <csanders@REMOVEcasnetworkservices.net> wrote in message
> > > news:eCSkSQ2rDHA.3420@tk2msftngp13.phx.gbl...
> > > > I added a server publishing rule for each of the protocol
definitions
> > that
> > > I
> > > > created. I still can't seem to get it out of the ISA server. No dial
> > tone.
> > > > Where could I be going wrong?
> > > > "Moishe Grunstein" <max@tornado.to.nospam> wrote in message
> > > > news:un8EwjyrDHA.560@TK2MSFTNGP11.phx.gbl...
> > > > > The only way I beleive it will work is if you set it up as a
secure
> > NAT
> > > > > client, I use a similar system from www.voicepulse.com For more
info
> > on
> > > > > secure NAT see
> > > > >
> > > >
> > >
> >
>
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechnol/isa/proddocs/isadocs/M_S_C_NATClient.asp
> > > > >
> > > > >
> > > > > "Chris" <csanders@REMOVEcasnetworkservices.net> wrote in message
> > > > > news:%23pDirkxrDHA.3420@tk2msftngp13.phx.gbl...
> > > > > > I ordered a system from www.vonage.com
> > > > > > It works great as far as the voice quality, etc. but I can't for
> the
> > > > life
> > > > > of
> > > > > > me get it to connect behind ISA.
> > > > > > I have been told by tech support that it uses ports 69, 123,
> > > 5060-5063,
> > > > > and
> > > > > > optionaly 10,000-20,000 if the voice quailty is poor. All UDP
Send
> > and
> > > > > > Receive. I created a protocol definition and then created the
> rules
> > > for
> > > > > > this. Still can't connect. Does anyone have any experience with
> > this?
> > > > > SBS2K3
> > > > > > with ISA 2 nics. cable modem public ip on the wan adapter.
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>