Power User Management Console - SBS2K3
Permissions issue -
Logon via Remote Desktop Connection to SBS2K3 server
using Power User account.
Open Server Management.
Select user.
Right-click to disable account.
"Windows cannot disable object because: Insufficient
access to perform the operation."
Cannot successfully change password either.
This target user is a User. It was migrated over from
SBS2K during an upgrade from SBS2K to SBS2K3. Can create
new user and disable/enable and change password
successfully. Cannot change password for migrated users
(User). Used the Change Permissions wizard to replace
permissions on the user (while logged on under the Admin
account). No change. Created new Power User account.
Logged on via this new account and tried again. Same
result.
Suggestions? Has anyone seen this?
Karen Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160046
Synchronize / Replicate between two SBS2K servers
I have two SBS2K servers in two different domains.
They both have a broadband internet connection.
Is it possible to replicate / synchronize data between
both exchange servers in this situation ?
I'm trying to get the mailbox from a single user
available in both domains.
Regards and thanks in advance,
Frans. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160044
SBS 2003 Group Policy for Outlook 2003
Hi,
I am trying to turn off the group policy that forces Outlook 2003 to
send/recieve emails through Exchange. We need the emails for now to go out
through a pop account. Everytime I make the pop account the default for
Outlook and reboot, a group policy changes it back to Exchange on the
reboot.
Any help would be great.
Thanks Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160039
SUS first sync....?
hello all..
just setting up a brand new w2k server...and am attempting
to use SUS.
in running same, and doing the first synchronization run,
it says that there are 4000+ files to d/l
???
why is that? shouldn't it only update my server with the
latest and most up to date items?
it took almost 2 hours to go and get the first 800....so
4000 is a LONG time to wait...but is it right in doing so?
Jim Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160038
Deleting Mail in Exchange
Anyone know of a program that will delete e-mail out of
user accounts based on days? Currently, Exchange stops
allowing new mail based on space. That is the MB setting
being set on X number and the account being full. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160035
Remote access to ADUC
Does anyone know how to access ADUC from a client machine on the network
without using Terminal Service's?
I'm running a SBS2K server with a Win2K network of client machines.
Thanks in advance
Andy C Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160032
SBS2003: Add user wizard does not create mailbox
Customer has SBS2003 Premium.
2 users were added today through "add multiple users" and 2 new computers
added to the network for them (Windows XP Pro). Everything seemed OK, the
workstations were configured correctly except when they tried to open
Outlook for the first time, it gave the usual "name couldn't be found in the
address list". When you go into Exchange system manager, you can't see the
new users mailboxes.
The add user wizard used to work without problems.
Hope someone can help.
Robbie niblock Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160031
clients check
How can i check every web connection that every user has from my SBS 2003?
Silvano Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160024
Relocate Useres Shared Folders
I am currently migrating my existing SBS 4.5 to a new SBS
2000 installation and want to relocate User's Shared
Folders to another drive.
On my existing SBS 4.5 system, I have done this and shared
out each sub folder as User1$, User2$ etc. In this way,
each user gets access to his own share, but can't see any
others.
I have tried doing this on the new SBS 2000 installaion,
but the Add User Wizard seems to complain because I've got
rid of the "User" share.
Do I have to have the "User" share, or is there a registry
hack to get around this situation?
Thanks,
Gary Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160022
Win 2000 Server and Boot.ini
I am setting up a test copy of Win 2000 SBS on my home machine. (I am within
my licenced limits)
On my home PC I have 2 HD's
On my c: drive I have Win XP Pro installed
I insatlled Win 2000 SBS on my D: drive.
I am now having problems getting into my Win XP O/S. Previous to this
installation I had Win 2003 Server on my drive. The Boot.ini file on my C:
properly directed the load up depending on which O/S I chose at the startup.
The problem I am now experiencing is that when I choose to go to my Windows
XP drive Windows 2000 SBS starts to load, but crashes immediatley looking
for a file in windows/system32. Windows is the correct folder for my Win Xp
drive (vs. Winnt on SBS)
My Boot.ini was removed from my C drive to my desktop during the
installation. When I try and paste it back on to c: I get a message saying
do I want to replace the boot.ini file already on C:, which I can't see or
find (proper setting have been applied to show hidden files. I have elected
not to overwrite this file.
I am concerned that if I do a repair on Win XP (did one on SBS it did solve
the problem) that I will screw up access to both systems
Any help would be appreciated. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160021
Veritas WMI Backup problem
Hello Group,
I have a customer running Veritas 9.1 SBE on a 2000 SBS. All was fine until
the backup stopped working, with "An error occurred retrieving the WMI
Repository data directory" displayed in the Veritas backup log. I tracked
this down to http://support.veritas.com/docs/253921 which suggests I
manually backup the WMI data through the WMI properties. This produces an
error "Failed to connect to local computer because windows server execution
failed." The Veritas article helpfully states that if an error is produced
then Microsoft support should be contacted, but I can't find a relevant
knowledgebase article. Please help, our customer isn't getting a backup.
Rob Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160015
SMTP service HANGING server
problem at a client site today > sbs2k has been running fine for 6 months
hardware is HP Compaq ML350, dual p4 ht CPU's, 1.25gb memory, 3x RAID1
arrays
today mail not processing and server running very slowly
we came in and found virus messages about zafi.b viruses > symantec
corporate edition has been picking these up and we check definitions are up
to date each morning.
when scanning we found viruses in messages in the SMTP badmail queue
initially we thought zafi.b was our problem
however found nothing in the registry as we were expecting.
so since then we have found the following .....
server runs incredibly slow. cannot use it basically
restart in safe mode and it works fine
disable various services and discovered that SMTP service when disabled and
system rebooted fixes the problem
so now thinking the SMTP queue has somehow corrupted and need to get this
fixed
have tried disabling Exchange services
removing SMTP and NNTP service > didn't remove all of IIS > should we ?
then reinstalling them
running SMTPREINSTALL.exe tool to get IIS(smtp) and Exchange talking again
(extend SMTP service with extra verbs)
but on reboot the same problem has reappeared
How do you fix the SMTP service / IIS / Exchange delivery issues on SBS2000
?
We are planning next step of >
Check all backups from 2 days ago
Remove all AV software to ensure no viruses have taken over them > just in
case
By the way server is now disconnected from everything else to avoid
reinfection or prpogation to other machines
Remove IIS totally (including SMTP and NNTP)
Delete IIS metabase if it still exists > metabase.bin
Reinstall IIS
Apply Win2k SP4
Reboot
Reinstall exchange > exchange 2k documents talk of this but we are wary of
how and what will occur when doing this in SBS2000
Reinstall Exch SP3
Reboot
Voila OR perhaps Voi NON
Thanks for your help
regards
Jeremy Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160009
Distribution Groups??
Hi there.
Ive tried searching the web on this and turned up no results.
Does anyone know how to create a distribution group on exchange to go out to
external people who do not have an internal e-mail address?
We need to send a e-mail out to our customers about latest business
proposals, but making sure that they only see the distribution name in the
Sent to box on the mail.
Thanks in advance
Andy C Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160007
remote desktop problem
With many clients I use "remote desktop" so they can
access their own pc from home over a VPN.
Usually there are NO problems.
With a new client who's SBS2000 was installed by Hewlett
Packard, I get an error message saying "the local policy
does not allow interactive logon"
The user has ADMIN rights on BOTH his and the SBS
The user is also granted access remotely within XP
The users settings in "active directory" are "allow
terminal services"
I can not access the group policy editor on SBS, even with
admin rights or with the original admin account!!!
How could I FORCE entry into the GPO?
Any help would be appreciated. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160006
Exchange for multiple domains
I have a question about receiving mail for THREE different domains.
Now we have 10 users that receive mail for user@domainONE.com
1 user that receives mail for user@domainTWO.com
The boss wants to receive mail for everyone@domainTHREE.com
so I need all mail for domainTHREE.com come delivered to a single user.
How can I do this?
Thanks a lot for your replies,
Filippo Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 160000
SID
Hi
I am getting the warning in the event log
Source: SceCli
Type: Warning
Event ID: 1202
Computer: Computer name
Description:
Security policies are propagated with warning. 0x534 : No mapping between account names and security IDs was done.
For best results in resolving this event, log on with a non-administrative account and search http://support.microsoft.com for "troubleshooting 1202 events".
A user account in one or more Group policy objects (GPOs) could not be resolved to a SID. This error is possibly caused by a mistyped nor deleted user account referenced in either the User Rights or Restricted Groups branch of a GPO. To resolve this event, contact an administrator in the domain to perform the following actions:
1.Identify accounts that could not be resolved to a SID: From the command prompt, type: FIND /I "Cannot find" %SYSTEMROOT%\Security\Logs\winlogon.log
The string following "Cannot find" in the FIND output identifies the problem account names.
Example: Cannot find JohnDough.
In this case, the SID for username "JohnDough" could not be determined. This most likely occurs because the account was deleted, renamed, or is spelled differently (e.g. "JohnDoe").
2.Identify the GPOs that contain the unresolvable account name:
From the command prompt type FIND /I "JohnDough" %SYSTEMROOT%\Security\templates\policies\gpt*.*
The output of the FIND command will resemble the following:
---------- GPT00000.DOM
---------- GPT00001.DOM
SeRemoteShutdownPrivilege=JohnDough
This indicates that of all the GPOâ??s being applied to this machine, the unresolvable account exists only in one GPO. Specifically, the cached GPO named GPT00001.DOM.
Now we need to determine the friendly name of this GPO in the next step.
3. Locate the friendly names of each of the GPOs that contain an unresolvable account name. These GPOs were identified in the previous step.
From the command prompt, type: FIND /I "[Mapping]" %SYSTEMROOT%\Security\Logs\winlogon.log
The string following "[Mapping] gpt0000?.dom =" in the FIND output identifies the friendly names for all GPOâ??s being applied to this machine.
Example: [Mapping] gpt00001.dom = User Rights Policy
In this case, the GPO that contains the unresolvable account (gpt00001.dom) has a friendly name of "User Rights Policy".
4. Remove unresolved accounts from each GPO that contains an unresolvable account.
a. Start -> Run -> MMC.EXE
b. From the File menu select "Add/Remove Snap-inâ?¦"
c. From the "Add/Remove Snap-in" dialog box select "Addâ?¦"
d. In the "Add Standalone Snap-in" dialog box select "Group Policy" and click "Add"
e. In the "Select Group Policy Object" dialog box click the "Browse" button.
f. On the "Browse for a Group Policy Object" dialog box choose the "All" tab
g. Right click on the first policy identified in step 3 and choose edit
h. Review each setting under Computer Configuration/ Windows Settings/ Security Settings/ Local Policies/ User Rights
Assignment or Computer Configuration/ Windows Settings/ SecuritySettings/ Restricted Groups for accounts identified in step 1.
i. Repeat steps 3g and 3h for all subsequent GPOs identified in step 3.
How to solve this problem Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159997
Client Installer Problem
I am having a problem with SBS2000.
I have just setup a new SBS2000 server with W2K SP4.
When a client logs on it prompts:
Small Business Server Client Application Installer
It is recommended that you install the Windows 2000
Service Pack 4. Do you want to install this now? Yes/No
If i select Yes, it starts copying files and then
eventually returns error:
Setup Error
You do not have permission to upgrade Windows 2000.
Please contact your system administrator.
I have enabled the User and Computer options in Group
Policy to install with Elevated Priviledges but still
nothing.
If i select No to installing SP4, the Client Applications
prompts to install, if you select Install Now is again
says:
Client Applications Intaller
Administative access is required to install client
applications.
Is there a way to get around this without having to give
all my users admin permissions?
Belinda Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159996
Backup exec quirk? 9.1 BE, SBS2k. Public Folder backup.
Hi All,
Using BackUp Exec 9.1 SP1 on an SBS2k Server.
I was reviewing my backup selections in a new installation of BE and noticed
that under the selection "Microsoft Exchange Public Folders" I only see
"Internet Newsgroups." Where is my public calendar? But I see the "Public
Folder Store" under "Microsoft Information Store" > "First Storage Group".
In addition, I also see the "Mailbox Store" under the same group of
"Microsoft Information Store" > "First Storage Group".
Is this by design? Has it always been like this but I never noticed?
Note that the HTTP Exchange Virtual Server is disabled in this case, if this
makes a difference.
Thanks
John Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159994
Backup Exec hangs at "99% Complete"
This is a multi-part message in MIME format.
------=_NextPart_000_0031_01C452EC.9CF4B9A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
SysAdmins:
I run a lot of services on our company server, one of them, the backup =
service is managed in software by Veritas Backup Exec 8.6. My backup job =
rotation was running smoothly until a week ago when I installed =
Veritas's DirectAssist troubleshooting software. Since then, all my jobs =
complete but hang at "99% complete". I've since uniunstalled this =
software and recreated the backup jobs. The problem persists. Restarting =
the BackupExec services clears the hang.
Does anyone have experience with this already?
Help!
Paul G. Dorn
------=_NextPart_000_0031_01C452EC.9CF4B9A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>
<DIV><FONT face=3DArial size=3D2>SysAdmins:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I run a lot of services on our company =
server, one=20
of them, the backup service is managed in software by Veritas Backup =
Exec 8.6.=20
My backup job rotation was running smoothly until a week ago when I =
installed=20
Veritas's DirectAssist troubleshooting software. Since then, all my jobs =
complete but hang at "99% complete". I've since uniunstalled this =
software and=20
recreated the backup jobs. The problem persists. Restarting the =
BackupExec=20
services clears the hang.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Does anyone have experience with this=20
already?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Help!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Paul G. =
Dorn</FONT></DIV></DIV></BODY></HTML>
------=_NextPart_000_0031_01C452EC.9CF4B9A0-- Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159977
SBS POP3 Connector
Client has been using the POP3 conector to retrieve mail
for several months; yesterday it stopped working.
If I click the 'Retrieve now' button on the properties
dialogue, get message 'Initialization Error'. No error
number, nothing in the application event log in event
viewer. I have set diagnostics logging to maximum for
this connector.
Is there a separate event log for Exchange / POP3
connector events?
I have tried removing and replacing the global ISP mail
host record in the POP3 connector dialogue, and also re-
booting the server.
Anyone got any ideas how to troubleshoot this?
TIA
Paul Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159975
Invitation - June Kentucky Small Business Server User Group (KYSBSUG) Meeting
You are cordially invited to attend the June meeting of the
Kentucky Small Business Server User Group (KYSBSUG)!
Date: Wednesday June 23, 2004
Time: 6:30 pm - 8:00 pm Eastern (GMT -5)
Location: University of Louisville - Shelby Campus
Building: Information Technology Resource Center (iTRC)
Room: The Theater
Address: 9001 Shelbyville Road
City/State/Zip: Louisville, KY 40222
Facility Phone: (502) 852-0900
Venue URL: http://www.theitrc.com
Agenda:
6:00 - 6:30 - Meet fellow SBSers, grab some refreshments & find a seat
6:30 - 6:45 - Orientation for new KYSBSUG members / attendees
6:45 - 7:20 - Presentation: "Building a Profitable Business Model around
Microsoft Small Business Server 2003"
Presenter - Tim Barrett from KYSBSUG
7:20 - 7:35 - SBS Q&A
7:35 - 7:45 - Information on TS2 and upcoming local Microsoft Events
7:45 - 8:00 - Wrap-up and drawing for a boxed copy of Office 2003 Small
Business Edition 2003 (NFR) and other giveaways
Admission and parking are FREE!
The Theater at the iTRC offers comfortable stadium-style seating for 55
people and a large projection screen, so be sure to invite anyone interested
in Microsoft Small Business Server! IMPORTANT - This is a secure building,
so please try to arrive before 6:30 PM E.D.T. to be sure you can get in the
building.
E-mail Tim Barrett at timbarrett@rehabdesigns.com or call (502) 266-9061
x105 with any questions.
Campus Map:
http://www.theitrc.com/html/shelby_campus.html
Expedia Map:
http://tinyurl.com/2meg5
Directions to the U of L Shelby Campus - iTRC:
(The Shelby Campus is in the EAST end of Louisville, one block West of
Hurstbourne Lane)
From the Airport:
Take I-264 East (Watterson Expressway) out of the airport for approximately
6 miles. Once you pass the I-64 interchange, look for US 60 (Shelbyville
Road) which is the St. Matthews/Middletown exit. Go East towards Middletown
for approximately 1 mile through a commercial, and then residential, area.
Shelby Campus will be on your left.
From I-64:
I-64 West into Louisville to the Jeffersontown/Middletown exit #15 which is
Hurstbourne Lane (State Road 1727). At the end of the ramp, turn right
towards Middletown. Stay on Hurstbourne to US 60 (Shelbyville Road) which
is approximately 1 mile. Turn left onto US 60. Shelby Campus is on your
right just past the first red light.
From I-65:
I-65 North into Louisville to I-264 East (Watterson Expressway). Go
approximately 6 miles to US 60 (Shelbyville Road) at the St.
Matthews/Middletown exit (which is just past the I-64 interchange). Go East
towards Middletown for approximately 1 mile through a commercial, and then
residential, area. Shelby Campus will be on your left.
From I-71:
I-71 South into Louisville to I-264 West (Watterson Expressway). Go
approximately 2 miles to the US 60 (Shelbyville Road) at the St.
Matthews/Middletown exit. Go East towards Middletown for approximately 1
mile through a commercial, and then residential, area. Shelby Campus will
be on your left. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159973
Solution - Win2k SBS POP3 Connector - C0000005 ACCESS_VIOLATION
Group,
Had this error yesterday, a Google search didn't come up with a quick
solution so I thought I'd post how I fixed it, in our case.
(I think) it turned out to be a corrupt message in the POP3 Conn.
queues. I had read on some older posts that corrupt email can jam up
the service, and proceeded to delete the mail on our hosting server -
did not fix the problem.
We also had a corrupt event app log, which I thought maybe hung up the
service. So I fixed that (set eventview service to Disabled, reboot,
delete ..\system32\config\*.evt, reset service to Auto, reboot). POP3
Conn started, but would not retreieve mail.
Finally I stopped the POP3 Connector and deleted orphaned messages in
..\Program Files\MS BackOffice\???\POP3 Conn\Incoming and InForward,
and another directory full of .etb files (can't remember as I write
this, on different machine now) that turned out to be the account
information. Recreating the account information after restarting the
service seemed to solve the issue and the POP3 Connector is working
again.
Something in there was corrupt. We also had those event log problems
and my wins db was corrupt, and CHKDSK took a long time (was remote so
couldn't see screen + logging was disabled) so I'm thinking drive
issues. Possibly antivirus quaratined something out of there and
fubared it, I have since excluded the directory.
Hope this helps someone in the future.
Nate Erb
IT Fusion SOS - Milwaukee, WI
(414) 852-5851 Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159969
Group Policy error
Hi
I have implemented group policy for the users so that they cannot open the network properties. This is working on all windows 2000 machines but this is not working on xp systems. I checked the event log and the error was
Type Error
Source MsiInstaller
Description:
The description for Event ID ( 10000 ) in Source ( MsiInstaller ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Product: Microsoft Group Policy Management Console with SP1 -- You must be running Windows XP SP1 or Windows Server 2003 build 3602 or later to install Microsoft Group Policy Management Console with SP1, (NULL), (NULL), (NULL), (NULL), (NULL), (NULL).
Some one help me on this issue
Thanks
Vinod Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159968
Users
Hi,
If the server is SBS2000 then you do not need to create
the computer account on the server. With Win2000 servers
the accounts are created when the computer is joined to
the domain.
Make sure that you have joined the domain using a user
account that has permission to create the account. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159965
Viewing a user session
I was just curious....
I have a small network with 10 computers and a SBS2000 server. Is it possible to view a user session from one of the other machines on the network using software built into Windows SBS, and if not, what software could I use to do that?
Thanks Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159964
Arjen Jongeling, een oude bekende
Hoewel, Arjen Jongeling is hier nog nooit geweest en ik denk dat Arjen Jongeling hier ook nooit meer zal terugkomen. Sterker nog, Arjen Jongeling zit hier helemaal fout. Maar ja, het doet het goed in de Google archieven. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159962
Windows 2003 System Accounts within 2000SBS Domain
Sorry if you have seen this already but I think I posted it to the wrong
place.
I have just added a Windows 2003 DC to a Windows 2000 SBS
domain and I seem to be missing at least one system
account specific to windows 2003 (specifically
the 'NETWORK SERVICE' account). Before you ask I did
follow through the ADPrep routine prior to bringing the
2003 server into the domain, and all went well.
Has anyone else experienced this or have any ideas on what
to try to get this system account to show/install itself?
The reason this was noticed and came about was due to a
problem with the fax service and running it on a domain
controller - apparently I needed to give the network
service account some user rights according to this link:
http://www.adminlife.com/247reference/msgs/13/67140.aspx
Upon trying to add the account I identified that it wasn't
listed therefore my current situation above ..
I am going to try to add the SID for this account (S-1-5-
20) directly to those rights and see if that solves my
problem in the mean time, but I would appreciate any
thoughts anyone might have on this still. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159960
SBS 2003 - VPN - IPX Configuration
I have VPN and RRAS setup however I cannot find out how to configure the IPX portion of the VPN clients connection. I want to provide the vpn client with the IPX/SPX network information that allows him/her to use the protocol through pptp.
I scoured the internet, help files, etc.
Microsoft posts...
-----
A computer running the NWLink IPX/SPX/NetBIOS Compatible Transport Protocol (NWLink) cannot connect to other computers.
Cause: Routing might be configured incorrectly.
Solution: Try the following:
Verify that you have NetBIOS broadcast propagation (type 20 packets) enabled on all the router router
Hardware that helps local area networks (LANs) and wide area networks (WANs) achieve interoperability and connectivity and that can link LANs that have different network topologies (such as Ethernet and Token Ring). Routers match packet headers to a LAN segment and choose the best path for the packet, optimizing network performance.interfaces between the computers. (A Windows remote access server, which is a server running Windows Server 2003 and the Routing and Remote Access service, is an IPX router.) You can enable NetBIOS broadcast propagation in Routing and Remote Access.
Verify that you do not have more than eight routers between the computers running Windows.
...
Note:
Computers running operating systems in the Windows Server 2003 family cannot be IPX routers.
-----
Post 2 (Really Helpful!!!)
---
Cause: The VPN client is configured to request its own IPX node number, and the VPN server is not configured to allow IPX clients to request their own IPX node number.
Solution: Configure the VPN server to allow IPX clients to request their own IPX node number.
---
Is ipx routing capability a necessity for SBS 2003 RRAS to provide the necessary ipx/spx information to the vpn client in order to have a successful ipx/spx connection through pptp? What am I missing?
HELP!!! Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159953
Exchange 2003 POP3 Connector removing routing details?
Hello,
In Outlook if I click View> Options I can see the email headers. If I download messages directly from the POP3 server at my ISP, the headers generally contain three or more lines starting with: 'Received:'. This shows which email servers have been used to route the email from the original sender, through my ISP and to me. When I received emails through my exchange account, which uses the POP3 Connector, I only get one entry beginning: 'Received: from mail pickup service'. All the information about the routing of the messages through my ISP and from the originator appear to have been stripped from the messages. This did not used to happen before we migrated from SBS2000 to SBS2003.
Is there a setting somewhere to prevent the POP3 Connector from removing these headers?
TIA
Phil. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159951
LANDREGISTERY WEB SITE
I have a small buisiness 2000 server all web sites seem to work ok except a
land register web site and surtain pages will not display . I think this is
ISA problem
Can anyone help Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159939
SBS 2003 Premium licensing...
Doing a dual server install shortly. The primary domain controller will
obviously be the SBS box, and the second machine will be a Windows2003 box
which will be the apps server.
There are a total of 20 workstations (WXP).SBS comes with 5 clients, and we
were going to purchase another 20 clients. How does that work with the
second server? I assume that I don't have to buy 20 client licenses for it
aswell as the primary server.
Regards
Robbie Niblock Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159934
SBS2003 POP3 Error
Seem to be having this at a number of customers sites who
are using SBS2003 and POP3 e-mail.
Error 1053 POP3 Connector
The delivery process for message finished with one or more
errors.
It doesn't seem to be affecting e-mail delivery but could
do with figuring out why its logging it as an error.
Thanks Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159931
SBS 2003 Backup - Can't Exclude folders
Running the SBS 2003 Backup Configuration wizard, and trying to exclude folders, but it keeps saying that the folders are required to restore the system, or a sub-folder of a required folder.
I have a number of shared folders that just contain old archive information that needs to be available to users, but doesn't need to be regularly backed up. How can I exclude these from my backup.
TIA
Phil. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159928
Upgrading SBS Group Policy for Windows XP
Hello,
I am trying to upgrade the sbs policy to include the additional xp features
(using kb 307900).
However, the new values are not injected into the existing policies.
There is one exception to this: if I create a brand new policy on the server
and then open that policy on an xp pro machine (without opening it first on
the server), it updates perfectly. However, if i then attempt to open up the
policy on the server, all new settings are lost....
Can anyone shed any light on what is going wrong?
TIA
Stephen Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159925
<< Small Biz server news [was posted last night and got lost in the
Kevin's song of the week.....
news://msnews.microsoft.com/u59UrcMUEHA.3332@tk2msftngp13.phx.gbl
KB's of interest....
834141 - FIX: IP address is revealed in the content-location field in
the TCP header in IIS 6.0:
http://support.microsoft.com/?kbid=834141
843073 - Non-English language reports contain English text after you
install Service Pack 2 in ISA Server 2000:
http://support.microsoft.com/?kbid=843073
837019 - Description of the Outlook 2003 hotfix package: March 17, 2004:
http://support.microsoft.com/?kbid=837019
837365 - You cannot expand the public folders list in Exchange System
Manager on a Windows Small Business Server 2003-based computer:
http://support.microsoft.com/?kbid=837365
836413 - You receive an "unexpected error occurred" error message when
you try to access resources on a Windows-based network from your
Macintosh computer:
http://support.microsoft.com/?kbid=836413
840685 - An event ID 1000 error message is logged to the application
event log when you restart Windows Small Business Server 2003:
http://support.microsoft.com/?kbid=840685
<<SMBnation announces Dr. Tom [Mr. ISA] Shinder and Brian Livingston as
Keynoters http://www.smbnation.com/ >>
Last week two security patches for Microsoft products - one for DirectX,
one for CRM applications.
Microsoft Security Bulletin MS04-016: Vulnerability in DirectPlay Could
Allow Denial of Service (839643):
http://www.microsoft.com/technet/security/Bulletin/MS04-016.mspx
Microsoft Security Bulletin MS04-017: Vulnerability in Crystal Reports
Web Viewer Could Allow Information Disclosure and Denial of Service
(842689):
http://www.microsoft.com/technet/security/Bulletin/MS04-017.mspx
No patch for this one - take mediation at this time....
(1) HIGH: Internet Explorer Multiple Vulnerabilities Affected: IE 6.0
and 6.0 SP1
Description: Fully patched versions of Internet Explorer reportedly
contain the following vulnerabilities that are being exploited in
thewild to compromise client systems. (a) Internet Explorer successfully
processes a webserver response that redirects the location of a
resourceto a file on the client system. Note that this file can be
accessed inthe security context of the "Local Computer Zone". (b)
Internet Explorer contains a cross-domain vulnerability that can be
triggered whenhandling a frame, and a "modal dialog box" that is invoked
from theframe. These vulnerabilities can be exploited by a malicious
website toexecute arbitrary code on a client system. The technical
details and theexploits have been publicly posted. Status: Microsoft not
confirmed, no patches available.Council Site Actions: Most of the
reporting council sites are awaitingthe vendor patches. Some sites plan
to roll out the patch during thenormal system update cycle and others
plan to expedite the rollout.Several sites have already notified their
desktop support teams to beaware of the problem.
http://archives.neohapsis.com/archives/fulldisclosure/2004-06/0031.html
Analysis by Jelmer
CERT Advisoryhttp://www.kb.cert.org/vuls/id/713878
---------------------
UPDATE - YES IT WORKS JUST FINE ON XP WITH IE6 and even works like a
champ on XP sp2]
So I just kicked my workstation at the office and the workstation at
home's Internet explorer to ?high security? settings. What that means is
that I've shut down the scripting and active X to be automatically
blocked at all times. Then if I have a web site that I really trust and
know if an OK site, I add it to ?my trusted site? list. Now this
normally is a pain and a bother.... tools, options, security, internet
zone, add sites, blah blah... way way way too cumbersome. Well not
anymore! My MVP buddies showed me this gem --
http://www.microsoft.com/windows/ie/previous/webaccess/pwrtwks.mspx
This little IE addition adds a quick shortcut under ?Tools? for ?add to
trusted sites?. I just did this to a couple of people at the office and
here at home and showed them all they have to do when they get to a web
site that they really ?need? to have working [like a business site] they
can add the site to the trusted zone and hit ?refresh? and voila.
Very nice. Very much safer out here.
I've also adjusted my "trusted zone" to not be "low" and instead is now
"medium" so it prompts me instead of automatically scripting. And add
sites to the trusted zone SPARINGLY.
****************************************************************
(2) MODERATE: Oracle E-Business Suite SQL Injection
VulnerabilitiesAffected: Oracle E-Business Suite versions 11i, 11.5.1 to
11.5.8Oracle Applications version 11.0Description: Oracle E-Business
suite offers a set of applications toautomate business processes such as
marketing, customer services,supply-chain management etc. The pertinent
business information istypically stored in a single database, and
accessed via the webfront-end offered by the E-Business suite
applications. This suitecontains multiple SQL injection vulnerabilities.
These flaws can beexploited via malicious HTTP requests to execute
arbitrary SQLstatements and procedures against the back-end database,
possiblyresulting in the compromise of the entire database. Note that
theInternet facing web servers hosting the E-Business suite
applicationsface the maximum risk. Very limited technical details
regarding how toexploit the flaws have been posted.Status: Vendor
confirmed, updates available.Council Site Actions: Only one of the
reporting council sites is usingthe affected software; however their
Oracle servers are internal facingonly. They plan to install the patches
after regression testing.Referencesosting by Integrigy
Securityhttp://archives.neohapsis.com/archives/vulnwatch/2004-q2/0032.html
Oracle Security
Advisoryhttp://otn.oracle.com/deploy/security/pdf/2004alert67.pdf
Oracle E-Business Suite
Homepagehttp://www.oracle.com/applications/index.html
SecurityFocus BIDhttp://www.securityfocus.com/bid/10465
California identity theft law remains low-key Nearly a year after
California's landmark SB 1386 identity theft law went into effect, there
has been none of the troublesome litigation that had been predicted to
come in its wake. But the law has raised overall corporate awareness of
the need to have strong privacy protections in place, legal experts said
last week.
http://computerworld.com/securitytopics/security/privacy/story/0,10801,93667,00.htmlPreventing
identity theft focus of regional
meetinghttp://www.usatoday.com/tech/news/2004-06-08-id-theft_x.htm
Security gaps in Dutch airline and government wireless networksDuring
its special on computer attacks on June 3, the Dutch current-affairs
programme, Zembla, demonstrated to television viewers just how easy it
is to break into wi-fi networks and gain access to confidential
information. The networks found to be lacking in security were operated
by the Dutch airline, KLM, and the Ministry for Public Works and Water
Management (Rijkswaterstaat).
http://www.dmeurope.com/default.asp?ArticleID=1984
GAO points to airport security holes
http://www.fcw.com/fcw/articles/2004/0607/web-gaotsa-06-08-04.asp
- - - - - - - - - -
Russia and China 'behind current spam deluge'
As hardcore criminals step up their spamming,
experts believe that nine out of 10 of all emails
may soon be unsolicited junk. Organised criminals
based in Russia are fuelling the rise in the
amount of spam sent over the Internet, according
to a leading opponent of junk mail.
http://news.zdnet.co.uk/internet/security/0,39020375,39157120,00.htm
- - - - - - - - - -
Woman fights for new domain to protect children
Three years ago, Mary Conyers was shocked and
horrified when her granddaughter accidentally
pulled up an a___t website on the Internet.
?She finished her homework and was going to
look at Teen magazine and bam! there it was,?
Conyers, the founder of Protect Every Child,
said. A simple spelling error sent Conyers'
granddaughter to this p_____graphic website
featuring teenagers. At that moment, Conyers
made a promise to her granddaughter that she's
still fighting to keep.
http://rdu.news14.com/content/headlines/?ArID=48769&SecID=2
- - - - - - - - - -
Apple posts second Mac OS X vuln patch
Update Apple has posted a second software update
intended to fix a vulnerability that exploits the
way Mac OS X handles URI links. We installed the
update, Security Update 2004-06-07, on a Mac OS
X 10.3.4 machine. After restarting the machine,
we went straight to Unsanity's web site, the
location of a pair of web pages that test the
URI vulnerability. Neither tests was blocked by
the update, details of which can be found here.
http://www.wired.com/news/mac/0,2125,63756,00.html
- - - - - - - - - -
Microsoft releases monthly security patches
Microsoft Corp. released software updates for
versions of Windows XP and Windows Server 2003
and warned customers about a security vulnerability
in a Windows component called IDirectPlay4, which
is used to support multiplayer network games.
http://security.itworld.com/4940/040608mssecurity/page_1.html
http://zdnet.com.com/2100-1105-5228887.html
http://news.com.com/Microsoft+patches+a+pair+of+flaws/2100-1002_3-5228887.html
http://computerworld.com/securitytopics/security/story/0,10801,93728,00.html
- - - - - - - - - -
Symantec: New Virus Deletes All Files Security
The virus that "deletes your whole hard drive"
has been a staple in dozens of e-mail hoaxes
that have circulated the Net in recent years.
In the real world, such viruses are few and
far between. According to Symantec, the new
VBS.Pub is just such a beast.
http://news.netcraft.com/archives/2004/06/08/symantec_new_virus_deletes_all_files.html
Another Trojan on the attack
http://news.zdnet.co.uk/internet/security/0,39020375,39157002,00.htm
- - - - - - - - - -
Cisco picks Trend to fight network worms
Cisco and Trend Micro yesterday extended an existing
security alliance with a deal to combine their
respective technologies in the fight against network
worms and computer viruses. Trend is among three AV
companies who signed up to Cisco's Network Admission
Control (NAC) program last year, a scheme designed
to curtail the spread of computer worms across
internal networks.
http://www.theregister.co.uk/2004/06/08/cisco_trend_fight_worms/
http://www.newsfactor.com/story.xhtml?story_title=Cisco-Picks-Trend-To-Fight-Worms&story_id=24489
- - - - - - - - - -
Intrusion-prevention start-up touts 'memory firewall'
The growing speed at which malicious hackers can
exploit new vulnerabilities is creating a need
for intrusion-prevention technologies capable of
proactively detecting and blocking attacks even
before software fixes become available for them.
With that need in mind, Determina Inc., a Redwood
City, Calif.-based start-up being launched today,
is introducing new technology that it claims
offers a better way to head off attacks than
other intrusion-prevention products.
http://computerworld.com/securitytopics/security/story/0,10801,93701,00.html
- - - - - - - - - -
Michigan man pleads guilty to wireless hack into stores
A Michigan man pleaded guilty on Friday to four
counts of wire fraud and unauthorized access to
a computer after he and two accomplices used a
vulnerable wireless network at a Lowe's Companies
Inc. store in Michigan to attempt to steal credit
card numbers from the company's main computer
systems in North Carolina and other Lowe's stores
in the U.S. Brian Salcedo could face up to 18
years in prison for the crime, which the government
claims could have caused more than $2.5 million
in damages.
http://computerworld.com/securitytopics/security/cybercrime/story/0,10801,93708,00.html
http://www.theregister.co.uk/2004/06/07/us_wardriver_guilty_plea/
- - - - - - - - - -
New virus cracks credit cards
A new computer virus "Korgo" raging now in Europe,
Asia and North America decodes numbers of credit
cards used in online systems, an Austrian Internet
service provider "Vienna Online" informed. Therein
virus looks like its predecessor "Sasser" worm,
which incurred huge damage to companies and
individuals, ISP experts said.
http://www.crime-research.org/news/07.06.2004/409/
- - - - - - - - - -
UK law firms fall down on security
One in 10 UK legal firms has suffered an IT security
failure and one in 20 has lost a client because of
it, a report claims. Research by NOP, commissioned
by security VAR Evolution Systems, also found
worryingly high levels of IT insecurity among
the 100 legal practitioners it surveyed.
http://www.vnunet.com/news/1155655
- - - - - - - - -
Virus writers deploy bulk mail software
Hackers have used spamming software to distribute
thousands of copies of a new Trojan. Email filtering
firm MessageLabs alone has intercepted more than
4,000 copies of the Demonize-T Trojan over the last
24 hours. Demonize-T is a multi-stage Trojan that
uses an object data exploit in Internet Explorer
(patch here) to download and execute an encoded
visual basic script from a website.
http://www.theregister.co.uk/2004/06/07/demonize_trojan/
- - - - - - - - - -
CPU-based security for Windows XP, Red Hat Linux coming
Microsoft Windows XP Service Pack 2 and the next
version of Red Hat Enterprise Linux 3 will support
new CPU-based security protections designed to
stop incoming malicious executable code from
being triggered.
http://computerworld.com/securitytopics/security/story/0,10801,93712,00.html
- - - - - - - - - -
NIST keeps publishing
One way to quantify the growth in importance
of computer security work is to count the pages
of security guidelines published by the National
Institute of Standards and Technology in the past
year. The total is 1,200 pages, said Ed Roback,
chief of the Computer Security Division. Speaking
June 4 in Washington, D.C., at the E-Gov Institute's
Annual Government Solutions Forum, Roback said
documents on topics as unremarkable sounding
as security categorization often generate strong
responses.
http://www.fcw.com/fcw/articles/2004/0607/web-nist-06-07-04.asp
- - - - - - - - - -
Data theft detective work begins at the office
Intellectual property and other sensitive consumer
data are seeping out the doors of corporations at
an alarming rate -- and the culprits aren't necessarily
a cracker with a broadband connection holed up in his
mom's basement, or a wiseguy who's Dumpster diving.
Users nestled inside the enterprise firewall with
an abundance of unmanaged privileges are most often
to blame, according to a soon-to-be-released study
conducted by the director of an identity theft
program at Michigan State University.
http://searchsecurity.techtarget.com/originalContent/0,289142,sid14_gci968920,00.html
Passwords can sit on hard disks for years
http://www.newscientist.com/news/news.jsp?id=ns99995064
RSA focuses anew on the password problem
http://computerworld.com/securitytopics/security/story/0,10801,93711,00.html
- - - - - - - - - -
The Deadly Duo: Spam and Viruses
A small nugget of good news lies buried among
the mountains of unsolicited commercial e-mail:
the spam volume held steady from April to May,
according to two leading e-mail processing firms.
Brightmail's Probe Network found that spam leveled
at 64 percent, while Postini measured the monthly
volume unchanged at 78 percent. According to
Brightmail's assessments, the last time the
spam volume was unchanged was August 2003 when
it maintained a 50 percent level.
http://www.internetnews.com/stats/article.php/3364421
- - - - - - - - - -
Where, Oh Where Is Windows XP SP2?:
http://www.microsoft-watch.com/article2/0,1995,1611161,00.asp
RC2 of XP expected any day... stay tuned....
UPDATE - Microsoft Offers Second Release Candidate for Windows XP SP2:
http://www.eweek.com/article2/0,1759,1612473,00.asp
Expected to be out shortly....
--
http://www.sbslinks.com/really.htm Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159923
creating a new sbs2000 domain
Hi,
I have an sbs2000 domain, and the setup of this domain is not right(lots of
errors, misconfiguration), and the only solution is to format and create new
sbs domain again. i have 24 clients in this domain
and the clients operating systems varies between windows 98 and windows
2000
my question, how can i after configuring the new sbs domain to move user
data from the old domain profile to the new domain profile
those of you who have been there, any suggestions? any problems i should be
aware of? any advice is highly appreciated.
Thanks. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159922
Iomega REV Drive
Hi,
I installed Iomega today on a SBS2000 latest SP & Patches and could NOT find
the key (Eliot wrote)HKLM\software\microsoft\smallbusinessserver\backup -
the smallbusinessserver does NOT Exist.
I also cannot see the REV drive in MyComputer but can see it in Explorer.
Using their backup program, it doesn't allow backup of network drives or
mapped drives. I have a Windows 2000 Terminal Server connected to the
network and the Iomega REV backup Program cannot see this server.
Any assistance would be appreciated.
Regards
David Hellewell Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159921
how to access webmail from the internet
I am sure there is a simple answer, but I am stuck. I can access webmail from the intranet site of my sbs2k3. What do I do to get to webmail or remote workplace from the internet?
Thanks
IT phytosan Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159920
SBS2003 remote workplace problems
When trying to access the remote workplace link I am told that I should follow the instructions of the assistant, but no assitant appears. Instead I get an error on page Icon at the bottom of the window "Invalid procedure call or argument"
Who can help?
thanks
IT PHYTOSAN Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159916
Correct IP config
I have the hardest time figuring out how to setup my network ip's, DNS's and gateways to allow the clients to connect to the internet aswell as the company net. I have the following setup:
4 clients connecting to a wireless router to a SBS2003 server
1 remote client set up for VPN
the SBS2003 server is connected to the internet through a separate networkcard so that all traffic flows through the internet
Router IP: 192.168.2.1, subnet 255.255.255.0
no DHCS
Server IP: 192.168.2.105 (internal)
static public ip (external)
DHCS enabled
router at VPN client: 192.168.3.1 subnet 255.255.255.0
what is the correct setup for the 4 clients:
IP(s) automatic or given? if given, what should it be?
DNS(s) automatic or given? if given, what should it be?
Gateway(s) automatic or given? if given, what should it be?
what is the correct setup for the VPN client?
IP(s) automatic or given? if given, what should it be?
DNS(s) automatic or given? if given, what should it be?
Gateway(s) automatic or given? if given, what should it be?
what is the correct setup for the Server external card?
Static public IP
DNS automatic or those published by ISP?
Gateway(s) automatic or that of DSL device?
what is the correct setup for the VPN clients network connection
IP(s) automatic or given? if given, what should it be?
DNS(s) automatic or given? if given, what should it be?
Gateway(s) automatic or given? if given, what should it be?
thanks IT Phytosan Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159915
Internet Service Down
Hi All:
This morning our internet connections from our SBS server
went south. I have checked the ISP connection and the
DSL modem by using a laptop to connect to the internet
through the DSL modem, service works fine. Our setup is
as follows: SBS with 2 NIC's, router (Netgear), DSL modem
(Actiontec). I have checked the IP addresses and nothing
appears changed from last Friday when everything was
running fine. I have even rerun the ICW hoping that
would solve the problem but still cannot connect to the
internet. I hope that someone can give me some
direction to solve my problem.
A second issue is that in our event log I am receiving
Event ID errors 1126, and warning id 1655. I have read
KD318170 and it refers to installing the latest service
pack. I have installed SBS SP1a which should include the
latest. Would a reinstall of SP1a solve the problem?
Any help would be appreciated. I am sure that I have not
been specific enough so will provide any additional
nformation that may be needed.
Thanks in advance
Gerald P Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159914
Can't use rkill
Hello
I have some problems with rkill command. I have 2
computers in a workgroup called "home". I am trying to
kill a proccess on a remote computer using the rkill
command and i get the following errors :
1. rkill /install \\servername -
Opening Service Control manager on \\servername access
is denied
2. rkill /view \\servername - The RPC server is
unavailable
I tried everything I possibly could.
Thanks for your help. Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159903
ISA and internal Webcam
Hi everyone,
I have a weird problem which I think is ISA-related... this is the scenario:
SBS2k + ISA w/2 NICs
WinXP Pro workstations (ISA firewall client + proxy settings)
1 Webcam (built-in webserver) connected directly to the switch inside the
SBS Lan (and a static IP assigned).
I can access the webcam perfectly from my laptop (which isn't part of the
domain nor has the ISA client installed or proxy settings). However, all
other workstations (which are configured to use ISA) can see the webcam but
with many errors: pics don't load, links don't work and more importantly the
ActiveX component is never even loaded to see the picture.
I think it has to do with the ISA proxy since it might be blocking something
and/or doesn't know where to look for the camera. I can pinpoint the problem
because it still connects and some stuff does load (and some load after a
reload, ect.).
Any ideas/suggestions?
--
Javier [SBS MVP]
<< SBS ROCKS!!! >> Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159902
Adding Windows Server 2K3 to SBS2K domain
I have found some resources showing that it is possible to add a W2K3
server to our SBS2K domain, but I also read that each of the servers you
add uses one of the SBS2K licenses. Is that correct?
If I remember correctly you can have a max of 50 SBS2K licenses. Is
that right?
Also, when I add a W2K3 Server, I would license it per-seat, using the
total number of seats purchased with the SBS2K server, right?
Thanks! Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159901
Anyone installed the new ISA ISASP2.exe on SBS2000?
I didn't hear any discussion on the issue so I thought I'd ask...Any
surprises with this service pack?
db Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159894
I would like to schedule defragmentation on the system volume.
Hi
I would like to schedule defragmentation on the system volume and other
volumes C, D, E & F
Can anybody advise how to go about this.
Regards
Barry Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159889
cannot mount media on ntbackup on sbs 2003
I have a Sony AITi130/S (wide SCSI) tape drive running on SBS 2003. It works fine with 3rd party software, but media will not mount using ntbackup. Usually I get an error saying "Backup device is not responding. Please check to make sure the device is on, cables are connected." I have checked cables and termination and I find no reason why it would work with 3rd party software but not ntbackup.
Any suggestions?
--
MTP Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159888
How to turn of DHCP
Hello,
We have an SBS2000server with one NIC and a DSL modem and a Zywall firewall.
All the 12 work stations assign IP address automatically.
Weve been experiencing some slowness with the network recently, and an
engineer suggested that we assign a fixed IP address to each ws and remove
DHCP from the server.
Is removing DHCP as simple as deactivating the one scope that they have ?
Or should we completely remove it ?
Any help would be appreciated.
Thanks,
Tony Tag: Het zal toch niet zijn wie ik denk dat het is? Tag: 159887
Is het die Ear Youth weer? Nee, het is Arjen Jongeling!
Het is een kwestie van geduld
voor heel usenet Hollands lult