=?iso-8859-1?Q?DHCP_is_not_handing_out_new_ip's?=
DHCP is not handing out new ip's
Problem:
Workstation is denied access to the domain upon logon. If
the client is disconnected from the lan, the client logs
in, without being authenticated of course. When the
client is connected back to the lan, dhcp shows that an
existing ip that did not expire is being used. Thanks for
your help. Kurt
SBS 2000 -SP4
range/ 192.168.16.1-254
exclusion/ 1-9
lease/ 8 days
options/ 3,6,15,44,46 Tag: question on VPN... Tag: 126825
SQL Server Security and SBS 2000
Hi -
I love SBS 2000, but running applications on a domain
controller is a BIG security concern for me. In fact,
Microsoft does NOT recommend running SQL 2000 on a domain
controller (see link below).
What can I do to secure Exchange 2000 and SQL 2000 on SBS
2000 beyond keeping the patches current?
Thanks -
Steve
http://www.microsoft.com/technet/treeview/default.asp?
url=/technet/prodtechnol/sql/maintain/security/sp3sec/SP3S
EC04.ASP Tag: question on VPN... Tag: 126821
Service Pack4 > Error - Must Abort 'Metabase' not found?
Hope all of you SBS2000 users have installed Service Pack
4 by now. User Beware! One hour prior to completion you
may be confronted with the following error: "Must abort
installation because the 'Metabase' could not be found".
Forget about finding anything about this in the Microsoft
Knowledgebase. There new motto is 'Why give away answers
in Knowledgebase when we can charge $150. per incident'.
Someone help a brother out. We must depend on each other! Tag: question on VPN... Tag: 126806
AcrServe2000 question
Probably not the right forum, but someone might have a
clue...
Running ArcServe 2000 with agents for BAOF and Exchange on
SBS2000.
The pruning job and saved everyday backup job always shows
ACTIVE. I cannot stop the job or do anything. This has
caused the backups not to backup, as both the pruning and
backup jobs are locked.
How do I make both these jobs READY again from ACTIVE??
I search support.ca.com and found no KB articles.
skc Tag: question on VPN... Tag: 126797
VPN between two SBS2000 sites
I have a client with SBS 2000 - 25 users on one site and
SBS 2000 - 10 users on another site who want to link their
sites in order to transfer files.
As they both have ADSL, I thought a VPN between the sites
would be a cost effective method as the files are quite
large mostly >8MB.
Has anyone done this successfully? What configurations are
required on the servers (IP address ranges etc.)
Have you used VPN enabled Routers e.g. Vigor? or
appliances like SonicWall VPN Routers?
They do not need to login to the servers on each others
sites, merely transfer files. Any suggestions would be
appreciated.
Thanks. Tag: question on VPN... Tag: 126794
HELP! T1 Connection/Cisco Router
Hello,
I'm in need of some serious help with a client we've done
an install for. They have a standard SBS2000, 2 NICS with
ISA. It is connected to a Cisco 800 Router from a
fractional T1. We can not get mail to arrive, plus we are
having problems configuring the router.
Is anyone interested in helping over the phone for a paid
support call. We are comfortable with how the SBS needs
to be setup, but the router is giving us fits. Please e-
mail me. bpearce@advcybpro.com Tag: question on VPN... Tag: 126787
Automatic Logoff
Is there a way, either in Group Policy or under the user
properties, to automatically log a person off if they
have been at idle to long?
Thanks, Mike Tag: question on VPN... Tag: 126771
automate cd burn
Hi
i would like to automate my backups to backup to a cd
burner. How do i configure this?
I want to backup from a server to a workstation that has a
cd burner in it. Is this possible?
thanks Tag: question on VPN... Tag: 126760
DNS problem
After changing my Internet connection (ADSL with second
nic) using the wizard.
Suddenly the clients get a wrong IP address when trying to
PING the server name
Example:
The severname is: WINSERVER
The normal IP-address is: 192.168.16.2
When opening a DOS box and typing: ping winserver
The DNS sets it to: 192.168.16.45
And ofcourse there is NO reply
After a while the system corrects itself but after some
more time it happens AGAIN
Due to this Outlook can not be used because the Exhchange
server cannot be found.... PLEASE HELP
Harpert Tag: question on VPN... Tag: 126753
Help me SBS
hi actually i totally confuse with Small Business server
means what it is . Is it Application software running on
some O/S or Application Environment .
How SBS is usefull to any one?
Pls Send me any help .
Ravsjacky
(Programmer)
ravsjacky@yahoo.com Tag: question on VPN... Tag: 126741
SBS 2000 Exchange connectivity with Exchange 5.5
Can Exchange 2000 that comes with SBS 2000 connect
directly with an existing Exchange 5.5 server (2 sites
connected by frame relay)?? Also, both servers are
already setup to serve the same internet domain.
Thanks Tag: question on VPN... Tag: 126728
SBS2000 CD2 SQL 2000
I used CD2 to install SQL2000 on a test machine in our
office.
I installed SQL2000 and Enterprise Manager etc...all
seemed to go well, until I received an error message when
adding more MB to a Primary Filegroup:
Error 1827: CREATE/ALTER DATABASE failed because...
Question: Does SQL2000 that gets shipped with SBS2000
work with large amounts of data? The error message told
me that the version of SQL2000 I am running cannot
accomodate greater than 3GB per database. I did a quick
scan in google, and it seems that this is the
case...SQL2000 on SBS2000 is a demo or low level version.
Is the above true??
I need advice.
Skc Tag: question on VPN... Tag: 126724
Missing e-mail function
Is it possible to send e-mail from SBS exchange using different e-mail
domain names? I have it working to recive e-mail with different domain
names, but my users want from outlook change the default "send" domain
adress. Tag: question on VPN... Tag: 126719
OT: 500,000 computers later... a teenager is arrested
FBI to arrest teenager for creating Blaster worm - theage.com.au:
http://www.theage.com.au/articles/2003/08/29/1062050652666.html
--
"Don't lose sight of security. Security is a state of being, not a
state of budget. He with the most firewalls still does not win.
Put down that honeypot and keep up to date on your patches. Demand
better security from vendors and hold them responsible. Use what
you have, and make sure you know how to use it properly and
effectively."
~ Rain Forest Puppy
http://www.wiretrip.net/rfp/txt/evolution.txt Tag: question on VPN... Tag: 126707
Possibly helpful for others....
This website has helped me send links to clients that are cut&paste
deficient. Ive noticed its potential use several times here as well:
www.tinyurl.com
Paste your extraordinarily long URL into there and out comes your nicely
packaged clickable link.
Hope someone finds it as useful as I.
JKinSD Tag: question on VPN... Tag: 126705
Recent Virus
Recently there are many virus
I have already heard on early Sep, the SoBig Virus will be changed to a very
seious virus.
Now my network (1 SBS server and 10 clients) is behind a hardware firewall
and with the latestest version and signature of Symantec AntiVirus. All
computers are equipped with the latest patches.
Is there anything I should do to further protect my network from virus
attack?
Many thanks in advance. Tag: question on VPN... Tag: 126703
winmgmt
Hi
i am back again.
i keep getting event ID 41 in my application logs.
the error is WMI ADAP was unable to create object index
3740 for performance library NTDS because no value was
found in the 009 subkey.
Is this error serious? How can i fix the issue?
thanks again Tag: question on VPN... Tag: 126700
trend micro
I am about to install trend micro on my server
Has anyone done this before and if so, what are some
things i should not configure and configure.
Did you have any trouble?
thanks again Tag: question on VPN... Tag: 126699
Installing Nortons on SBS2000
I am trying to install norton antivirus corporate edition
7.6 on the server. However, when I do the install I get
the following message:
Error 1606. Could not access network location<Program
Files>\NAV
Can anyone tell me what I need to do to fix the problem. Tag: question on VPN... Tag: 126695
BIG Exchange issue i think!
I have taken over from an administrator who has moved on from servicing this
client and left me with a nightmare! Standard SBS config with 5 clients all
XP Pro. Apparently the old admin guy was doing some remote admin work and
decided to upgrade trend, and then BANG no exchange. I have had a look at
the server and found that in exchange system management there are no servers
shown or in the admin console. Also missing is the default m drive that's
created when installing SBS exchange. I have checked out the knowledge base
and found little info but I have ran DomainPrep again in case it was
connected with this. DomainPrep executed and ran successfully but failed to
re-instate anything. Has anyone come across this before? and what can i do?
Can i re-install exchange on an SBS box? any help would be appreciated. John Tag: question on VPN... Tag: 126692
Forced Server Migration - help!
We upgraded an existing SBS 2000 with service pack 1a
(windows 2000 pack 4).
We got a services.exe error 128 and system continually
reboots (safe mode? no help).
Anyway, we were planning on upgrading to a new server
anyhow - but now we-re forced to, using disks (and backup
tapes) from old server.
Can anyone point me to a "how-to" - am willing to reenter
lots of stuff manually, but desperately need to access
(public and private) exchange stores.
Kerry Diehl
Power Quality Systems
(15 KV? no problem!) Tag: question on VPN... Tag: 126690
Fax Software
Any good software for receving and sending fax
single user licence (do not have Windows XP)?
Thanks in advance for recommendation Tag: question on VPN... Tag: 126688
Exchange Problem
A customer is having a problem with Exchange... Detailes follow:
1. SBS 2000 is an upgrade from 4.5
2. Configured DNS with forwarders.
3. Reviewed all TCP/IP settings to standard configuration.
4. Setup "Fully Qualified Domain Name" on advanced properties of SMTP
Virtual Server to be the same as the ISP's MX record. Changed from spi.local
to mail.domain.com
5. Ran Internet Connection Wizard.
6. Port forwarded TCP Port 25 to our server in the Router's config.
7. Verified that Port 25 is open.
8. Called ISP and had them change the MX Record.
9. ISP sent a test email to a user and verified he received the email.
10. Changed a users' email config to work off of Exchange.
11. Started Import of pst file. (This is where the problem starts).
a. After running for some time it error'd out with "Operation Failed".
b. I noticed that the inbox now had new messages but other subfolders
were blank!
c. Tried the import again. and had the same error except now there is
only the message that the ISP sent in the Inbox!
d. Tried to delete that message and received "The item could not be
deleted. It was either moved or already deleted, or access was denied"
e. Tried import on another user and received the same message and
symptom.
Finally, I noticed that we could send messages using Telnet and messages
were coming in but were being placed in the (Local Delivery) Queue. They
would never be routed to the correct location. Tried deleting the messages
from the queue and stopping and restarting SMTP, Exchange and finally the
Server. Any new messages would stay in the Local Delivery Queue and never be
processed. A look at the App log gave no indication there was a problem.
Help!
Thanks,
John Tag: question on VPN... Tag: 126681
event id 11001 - microsoft firewall
i am getting event id 11001 in my app logs and i cannot
find any info on how to fix it.
Microsoft firewall failed. The failure occurred during
initialisation of network address translation because the
config property msfpcname of the key
software\microsoft\fpc\arrays\{7188908F-4832-427B-8655-
D9E93F10DEC1}\policy elements\dialup entries\{207A6E97-
491c-46bf-A05E-0D7Edf6764C6}\credentials could not be
accessed. Use the sourced location 2.1927.3.0.1200.235 to
report the failure. The error code in the data area of
the event properties indicates the cause of the failure.
The error description is: The system cannot find the file
specified
That is the error. Any ideas anyone?
thanks Tag: question on VPN... Tag: 126675
Welchia//Nachi
Any help appreciated..
SBS 2000 with ISA got infected with the Welchia/Nachi worm when some clown
decided to switch off the ISA firewall whilst testing internal Cisco VPN
client.
Needless to say the server was not patched, and they noticed an increase in
the uploads since (TFTPD). I have since removed it by using the tool and
checking out the registry and open ports etc.
My question is that I tried to load the patch MS03-026 several times and it
goes through the motions and restarts, but it's not listed in the add/remove
programs as it is on other servers I have loaded this on? Should I be
worried about this and is there another way to check whether this has be
installed? Tag: question on VPN... Tag: 126672
SBS 4.5> SBS 2000 - It's all changed !!
After recently upgrading our server to SBS 2000 I am slowly learning how to
configure the server as required.
To start with I would like to configure Exchange to receive internet email
however I would like Full logging as was configured in Exchange 5.5, do do I
turn ion full logging so that I may trace if email is being received or not
?
Thanks
Henry Tag: question on VPN... Tag: 126671
New post, problem re-defined
The exact symptoms are:
If the internet line is connected, the server runs barely
at all with max cpu usage. If I disconnect the internet,
after about fifteen minutes the server is back to normal
speed. If I later try to re-connect the internet, the
thing slows to a crawl again.
I don't see any viruses in the process list, but DLLHost
is using the most cpu cycles, it may be getting commands
from a hijacked process or it may be hijacked itself.
I don't have antivirus on this box and I can't get the
internet to work long enough for an online scan.
Help? anyone? Tag: question on VPN... Tag: 126665
URGENT Help...Exchange Down M Drive gone
Well the exchange server is down obviously. The M drive is not being shown
in My Computer. The only back up the client has is the Priv1.edb and
Pub1.ebd dated today in the E drive in Program Files/Exchsrvr/mdbdata. I
have no idea why the m drive is gone. Can I re-install exchange and restore
the edb files to the m drive? What should i do?
Any help would be greatly appreciated.
Jason Tag: question on VPN... Tag: 126644
Nod32 Exchange Virus Scanner
Has anyone used this? Is it a good solid product? Just want some
advice before I go out and buy it. Ive found the desktop version to
be very good and extremely well priced for non-profit orgs (which I
deal with regularly).. Tag: question on VPN... Tag: 126642
Trust Relationship
I have two SBS2k servers on two separate sites.
I need to get trust relationship set up between them.
I have a VPN link via two netscreen boxes and can map the drives to each
other quite happily; however, when I try to set up the trust relationship
between them it comes back and says that it cannot find the domain
specified.
Do I need to set up the opposite domains in the local DNS or something to
get this to work.
We will also need to get the SQL servers on both sites to talk to each other
and replicate data (hence the trust relationship), will I need to do
anything else to get this to work??
TIA
Terry Tag: question on VPN... Tag: 126629
NEWBIE: SBS2000 XP clients cant see printers
Hi All,
I have just upgraded from an old sever running SBS4.5 to a new Dell server
running SBS2000. Got 17 clients, 12 of which are XP. If a printer is
attached to an XP client and set for sharing then other XP clients cant see
it or print to it. The server cant see the printers either. If the printer
is on a W98 client then the printer can be seen by all XP clients and the
server. (On the old SBS4.5 system there was no problem). I have restarted
the server and XP PCs and reinstalled the printers all to no avail.
I am sure its some security/permission thing but don't understand why.
Anyone help?
Thanks, David, UK Tag: question on VPN... Tag: 126617
Quick ?
I am in the process of reinstalling a fresh copy of sbs. I now have 'A'
server that is a complete copy of the current production one 'B'. After I
pull all the files and such off of server 'b' and put them onto the new
server 'A' and take down 'b'. Reformat 'B' and do it all over again.
So then I will have the exact oppositve of what I had before. 'B' will be
fresh server and 'A' will be production.
Now the whole purpose of this is to reformat the 'A'(which has 100x better
hardware) without downtime.
Ok so once I have the basic member server 2000 on 'A' I am going to dcpromo
it to pull the stuff off the 'B' and then go thought the rest of the sbs
setup thus being exact like I started with. But my question is which I am
finished with the ''B' do I have to do anything special other than jsut turn
it off and erase the computer name out of AD. Being that it is a SBS2000
server I wont be able to demote it like a normal 2000 server right?
Eddie Tag: question on VPN... Tag: 126608
backup
Thanks for the help before.. new question. The site I have gotten involved
with has no streaming tape for typical backup. It has a cd-rw drive which
has been used to back up all documents on the server. I have another 35 Gb
scsi drive ready to install at this time.
a. Can this also be used for system backup. I realize it isn't the best (?)
. My first thought is to reserve this drive purely for that purpose. Any
comments or suggestions.
TIA
carl stockwell Tag: question on VPN... Tag: 126604
Can't get one Client machine to talk to the SBS
Ok,
I have a SBS server with 4 machines connected to it, they can access
the domain, the server, etc just fine. I try and add a laptop it and
the lap top can not even get an IP address.
I have plugged the laptop it into other networks (including mine at
home) and it can get an IP address so I know the NIC works. I have
tried various network cables on the SBS network that I know work and
it still can not even get an IP or pint anything. Both lights are lit
on the the NIC so I know it is getting a singla of some sort.
I have also tried setting the IP manualy and it then can not
successfuly ping anything.
Any suggestions
Thanks
Henry
rapmstr@xnet.com Tag: question on VPN... Tag: 126583
POP3 Help
Hello,
I'm a tad confused on POP3 through an SBS2000 server. All
of the SBS's we've set up have had SMTP and have worked
great. Unfortunatly, the ISP that one of our clients is
dealing with is only allowing POP3. They also can't
answer the question I need answered on how to setup the
Exchange portion up. They keep referring back to the
indivudual PC's getting the mail.
If the domain at the ISP is yourcompany.com, I belive I
setup the account in the ICW to be
yourcompany@yourcompany.com and as a global account. I
have the unsername and password...Is there something I'm
missing?? The client hasn't gotten mail in 2 days.. Tag: question on VPN... Tag: 126580
Glad I did NOT buy Software Assurance for SBS!
I recall having a discussion on the value of buying Assurance before the
deadline last year.
The question was, "would I be sure to save money when the 2003 server came
out?" The answer was a definite "maybe". It appears from the online data
that Microsoft reports for this company, that the Assurance I would have
bought would have ended a few months ago. Thus I would be faced with
renewing it to allow me to get the 2003 upgrade. I would have thus paid as
much as an off the shelf copy of SBS.
Now we find that the list price for SBS 2003 has been "slashed".
Does this mean that anyone who paid into the program has just lost their
"investment"?
Tom Tag: question on VPN... Tag: 126577
Creating an image of an SBS2000 server
Hello to all.
There was an excellent thread in this newsgroup about a month ago -
discussing the issues/problems with restoring an SBS2000 server from a prior
tape backup (after a severe hard disk failure).
In summary, the root of the problems seems to be related to registry
references to Short File Names (SFNs). The problems were/are not specific to
SBS, but were exaggerated because of many programs being installed in
C:\Program Files\Microsoft XXXXX.
Several people suggested that imaging/cloning the server was the only way to
really be able to recover a server. Today I called Symantec Reseller
Presales Support. I was told by several different people that the Corporate
Edition and Retail Edition of Ghost is "not supported" for Servers, and that
RAIDs were "not supported". They referred me to the following articles:
Cloning a Windows NT or Windows 2000 Server (Document ID 1999012108164025)
http://service1.symantec.com/SUPPORT/ghost.nsf/8477deaaaafc102288256b1e00704619/51809cb4473378958825670000596a6a?OpenDocument&prod=Symantec%20Ghost&ver=7.5&src=ent&pcode=symghost&dtype=corp&svy=&prev=&miniver=symghost_75
Ghost compatibility with RAID (Document ID 1999010613522725)
http://service1.symantec.com/SUPPORT/ghost.nsf/docid/1999010613522725?Open&src=ent&docid=1999012108164025&nsf=ghost.nsf&view=8477deaaaafc102288256b1e00704619&dtype=corp&prod=Symantec%20Ghost&ver=7.5&osv=&osv_lvl=
Some of the issues discussed in these articles seems to be related to
creating one image - and trying to push it to multiple servers. That is not
my desired use of the software. I simply want to be able to clone the server
so that I can restore it in case of severe hardware failure.
I was wondering if anyone could comment on their use of Ghost (corporate or
retail) to clone and then restore an SBS2000 Server. Did it work okay? Any
issues?
Also, I was wondering if anyone could comment on their use of Ghost
(corporate or retail) when there was a hardware RAID in place?
Thanks in advance for the thoughts/comments.
Lloyd Wolf
Wolf Consulting, Inc. Tag: question on VPN... Tag: 126576
shared fax and any address book on W2K server
On the server - Outlook can see my address books, but shared fax
cannot. Any ideas?
I have the "show this folder as an email address book" box checked,
and the Windows XP clients have no problem whatsoever using shared fax
with the shared address book. Weird, huh? Shared Fax and the shared
address book are both on the server, but the server itself cannot use
the address book. Tag: question on VPN... Tag: 126574
Re: E-Trust Antivirus 6.0 won't grab new signature updates.
Hi everyone. Thanks for the responses.
Well, I tried changing from local system account to "administrator", with the password. I stopped
and started each of the services, and still no go.
I think I'll uninstall and re-install and see if that makes it magically disappear. Like I mentioned before,
I never had any issues with the SBS 4.5 and InoculateIT 6.0, so perhaps that is a bad .ini file or something...
Thanks again for responding! Tag: question on VPN... Tag: 126567
re: RESTART of the server doesn't work! The screen goes black with a white underscore in the upper left corner of the screen.
Hi. Thanks for the response. I am currently on SP4, with no hotfixes yet. If you can think of which hotfix
helped solve this issue, let me know, please. Thanks again!
Mine did that for a while between SP3 and SP4. Finally either SP4 or a recent hotfix cleared it up. What SP are you on?
swatch@adelphia.net wrote:
> This is bizarre, and only seems to be happening on the SBS, and not my other windows 2000 server, which are both the same exact make and models
> Compaq Proliant ML370.
>
> The servers are only about 4 months old.
>
> Any thoughts on this strange issue?
>
> Thanks! Tag: question on VPN... Tag: 126561
Performance Logs & Alerts service stops unexpectedly
I have a Win2K SBS server that has recently started having problems with the
above service. Initial symptoms noted on the network are that Exchange
clients cannot connect to the server. All other functions seem normal.
Looking on the server, the above service is stopped and event logs provide
no reason why. Exchange services seem to be running normally.
No performance monitors are running on this server.
Any thoughts and clues greatly appreciated. Tag: question on VPN... Tag: 126560
AD Permissions Effecting Outlook Address Book
As a Newbie to the AD I have created some new OU's in
which I have moved certain users. I have restricted access
to these OU's to certain people.
Now those people who have access their MS Outlook Address
Book shows all users in the company. No problem here. Thet
are able to send and receive emails using the address book
to all users.
Those who do not have access to the OU's in question have
noticed that the Global address book omitts those people
found in the restricted OU and therefore are unable to
send internal emails. To do so that have to type the Full
qualified email address to send emails.
Is there anyway to resolve this or is this part of the
overall sercurity to the AD.
Any help extremly appreciated.
J Tag: question on VPN... Tag: 126559
SQL installation
One of my customers has a SBS2000 server, but they didnt
install SQL at the time of the initial installation.
I have tried to installthe companent from the add/remove
programs wizard, and have been unable to install it.
Right at the end of the install it just says that an
unknown error has occured. Not much help eh?
Anyway the server is a generic PC, IDE disks etc, only 256
RAM, but seemingly plenty of disk space. I've tried
reboots, and adding other components, which seems to
work. any bright ideas anyone?
Cheers Tag: question on VPN... Tag: 126557
Deleting Viruses before it reaches the users mailbox? [sobig.worm issue]
After starting with a set of extension to be filters out of emails with
attachments *.exe, *.scr, *.pif, *.vbs & *.js and the rules worked after
testing with an email containg such an attachment.
I now find that most all the Exchange components have gone down and cannot
be started backup again.
I did add more extension to ISA SMTP filter rule to delete those attchments,
thats all.
Can't explain why the SMTP, Pops IMAP4 NNTP, MS ROuting engine, and other
components now have stopped.
Restarting these doesn't do anything.
Can pick up any email from exchange mailboxes anymore.
I've gone back to the ISA SMTP Filter and noticed the following, see
attached image:
Had upto 20 exclusion in the list of attachment extension to be deleted the
list now shows only 14, but their now marked with a red error symbol with a
cross.
Could this be the cause of the problems and exchange not starting up.
Or could it be an issue with ISA?
What can I do!
All that was done was add the extension to the filter.
/me sighs
and of course *.exe files also to be added to the rule as a possible way to
carry viruses.
"1stuk" <ap76@email.com> wrote in message
news:#qGmrRVbDHA.2256@TK2MSFTNGP10.phx.gbl...
> Thx for your responses!
>
> Managed to find ISA SMTP filter and now setting up the attachment
extension
> filter list
> At the moment PIF, SCR, VBS, JS are been denied and deleted as a rule.
>
> Are there any extensions that can be potential damaging to exchange users
> when retrieveing the emails in terms of trojan/virus/worms been carried
> through in attachments?
>
> Many thx.
>
> "sgupta" <news@4lowfare.com> wrote in message
> news:0e6201c36cf0$afdc7f40$a001280a@phx.gbl...
> > I am using ISA SMTP Filter to filter out any emails with
> > known attachments like .scr, .pif, etc. and also with
> > certain words that are common with these virus emails.
> >
> > The ISA SMTP Filter deletes such emails before they go
> > anywhere from the server. It works both ways - outbound
> > and inbound.
> > >-----Original Message-----
> > >So you don't have a exchange-integrated virus scanner?
> > Well, you should.
> > >
> > >You can delete mails according subject, attachments,
> > etc. . ISA FP1 can do
> > >that, there also are several other programs that can do
> > that (e.g. GFI mail
> > >essentials).
> > >Trend A/V has a client/server/messaging suite that is
> > able to filter
> > >attachments, but _for as far as I know_ all good
> > virusscanners do.
> > >
> > >HC
> > >
> > >1stuk wrote:
> > >> Using SBS 2000 and I wonder how can we delete the
> > constant amount of
> > >> emails generated by the recent 'Sobig.Worm' from
> > account mailboxes
> > >> before a user gets a chance to view them.
> > >>
> > >> Is there a way to say to SBS to delete all emails
> > containing a
> > >> specific Subject, filename and so on?
> > >>
> > >> We appreciate any responses, thanks.
> > >
> > >
> > >.
> > >
>
> Tag: question on VPN... Tag: 126555
Exchange Management Service
I Changed the logon for the Exchange Management Service to
administrator and now it will not start. I've changed it
back to the local system, but it still will not start.
Below is the text from the event log.
The Microsoft Exchange Management service encountered an
error (0xThe class is configured to run as a security id
different from the caller)
Any help would be greatly appreciated.
Thank you, Tag: question on VPN... Tag: 126549
Folder Redirection
I want to use folder rediredction but have ?. I am using roaming profiles
currently and would like to change to FR because of the longer login times.
I know u can redirect your my docs but if I I redict everything app data and
all will that carry over outlook and desktop setting the same as a profile
does.
I have to have the convenice of one user access more than workstation with
me having to configure a local profile everytime.
Eddie Tag: question on VPN... Tag: 126548
Local ISA Server VPN Wizard
From the admin console, expand ISA, servers and arrays, myserver, network
config. View, taskpad. If I select "Configure a Local VPN" and follow the
wizard for the first time what all happens and where?
How do you "undo" this process so you can start from scratch? Tag: question on VPN... Tag: 126547
automatic updates
Every day I'm getting the same updates and I install them, only to find the
same updates the next day? What's causing this?? Tag: question on VPN... Tag: 126540
What additional softweare needs to be installed on a Win98 clinet in order
to connect via VPN to our Windows 2000 server?
Just additional system files. Control panels add/remove programs and add
VPN.
Eddie
"Brad Pears" <bradp@truenorthloghomes.com> wrote in message
news:u54nCylbDHA.3748@TK2MSFTNGP11.phx.gbl...
> What additional softweare needs to be installed on a Win98 clinet in order
> to connect via VPN to our Windows 2000 server?
>
> Thanks,
>
> Brad
>
>
Addtional....VPN is part of the win98 but it not installed by default. It
is in the add windows components in the networking adaptors.. .Also u may
need to install an additional tcpip protocal in the network control panels
for the VPN and a dailup adaptor as well. if it does not add it for u.
After that u should be about to create a network connction and choose VPN
adaptor.
"Eddie Allen" <epa570@swbell.net> wrote in message
news:uHAodLmbDHA.1488@TK2MSFTNGP12.phx.gbl...
> Just additional system files. Control panels add/remove programs and add
> VPN.
>
> Eddie
>
>
> "Brad Pears" <bradp@truenorthloghomes.com> wrote in message
> news:u54nCylbDHA.3748@TK2MSFTNGP11.phx.gbl...
> > What additional softweare needs to be installed on a Win98 clinet in
order
> > to connect via VPN to our Windows 2000 server?
> >
> > Thanks,
> >
> > Brad
> >
> >
>
>