Too Much Traffic
I noticed today that by 11am our ISP said we had downloaded 230mb data. I
found this because it was a slow adsl connection... I'm in no doubt that
there has been heavy traffic somewhere. They say we've been doing it off
and on for a week. Goodbye $150.00
All our ports are shut to the outside if you scan with say sygate or grc.
Up todate NAV corporate finds nothing anywhere. I did an online av and
trojan scan from Symantec, also clean.
All systems are patched up todate and have had the baseline security and the
lockdown wizard applied.
In the ISA logs I can't find the traffic. I get may be 20 or 30 megs a day
total in and out, which is what I would expect. I am looking in the right
places, I can see the NAV corporate sigs coming in.
Our Dlink 504 router had the remote access turned off. Can anyone suggest
where else I should look for the trouble?
We've had this router about a week... could I have done something idiotic
that would be letting someone direct something through the router?
I should add that exchange is not an open relay; set up as per
msexchange.org, and will not relay in a telnet session. Plus by now I would
be deluged with complaints from the ISP if a gig of open relay had gone
through :-)
I'd be glad of any assistance.
Andrew Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140874
Terminal Services over ADSL
Hi,
I am looking at a company where there are 4 different locations/sites (soon
to be 5).
There are currently 74 users, 35 on the main, 20 on the secondary, 10 on
another, 12 on another and the new site will have 8 to begin with.
They have a lot of applications where they need to make sure that the info
is the same no matter which site they go to!!
Is it feasible to put in Terminal services on the main site and have all the
other users connect this way??
Will it work efficiently over and ADSL line or will I need to look at
putting in various leased lines??
Is there a more efficient way to do this to make sure that downtime is
minimised and the clients see the same data regardless of which site they
have to work from??
Would it be more efficient to put in Backoffice throughout (as they are
using exchange etc) and have some kind of file/data replication??
TIA
Terry Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140871
Exchange Crash
Hi all
Our SBS2000 server has gone mad and the exchange services
will not start and I am unable to get them to start. I
have tried service packs and hotfixes but no response and
it now all looks doomed! Is there any way of retriving
the mailboxes from the server?? is it a particular file
that stores all the mail data??
Is the file in program files/exchsrvr/mdbdata/priv1.edb
got anything to do with the mailboxes??
Please tell me it is and it's recoverable??
Mark Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140870
Another VPN Problem!!
Hi all
We use SBS2000 and are trying to connect a remote office
in London. They have a DSL connection in there Network.
I have configured RRAS and have tested the VPN using my
own dial-up ISP and it works fine but the guys in London
keep getting errors 619 & 721. The only difference
between them and me is that they are on a network with a
static IP address and gateway. Is there some more
configuring that I have to do??
Help!!
thanks in advance
Mark Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140869
disable SSL
QUESTION : HOW DO I TURN SSL OFF-- Please see error
messages below
The message could not be sent because one of the
recipients was rejected by the server.
The rejected e-mail address was 'marrast@marrast.com'.
Subject 'sent monday 2AM',
Account: 'gemsss.com', Server: 'gemsss.com', Protocol:
SMTP,
Server Response: '550 Unable to relay for
marrast@marrast.com', Port: 25, Secure(SSL):
No, Server Error: 550, Error Number: 0x800CCC79
The connection to the server has failed.
Account: 'gemsss.com', Server: 'gemsss.com',
Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error:
10060, Error Number: 0x800CCC0E Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140867
SBS 2000 desktop faxing service with V92 modem
Hello All
I have a Windows 2000 server SP1 (Actualy SBS 2000). I have always used v90 modems up until recently. I have never had an issue with the SBS 2000 desktop faxing service (Networked). Now I am using V.92 modems and I can not get the fax modem to send faxes. I am always getting fatal error and never get past the handshake. I beleive the issue is accross all v92 modems and the implimentation of quick connect which shortens the handshake time. I put a 33.6 modem or V90 on the same server, all works fine. These days all I have is V92 and I can not get any of the modems to work. I am trying init strings and even tried turning data compression and error correction off. I tried 33.6 and standard 56 k driver and init at&fx3+msv90dt but nothing seems to work
Any ideas ? Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140863
Trend 'out-of-date' warnings, CSM suite
Got Trend CSM suite set to update hourly, and to send mail alerts on
problems.
Got a mail saying that there had been an update, then next two nights got an
email saying "
"Virus pattern files saved on server YOURSERVER is out-of-date."
Any one else getting this? Has happened on all our servers.
All components are newish (SProt = 5.56; ScanMail - 6.1; OSCE = 5.5) Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140862
Any probs Trend ScanMail 6.2?
Anyone had any problems updating ScanMail component from 6.1 to 6.2 (now
available on Trend site, new features)?
Thanks Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140860
HELP.......VPN problem
I bought 2 VPN routers (Linksys)to join 2 sites, VPN
tunnel was built successfully between these 2 routers.
One end is connecting SBS2000 Ext. NIC, the other end is
connecting to W2K Server Ext NIC. Unfortunately, I cannot
access to those servers data...... what should I do??
pls help Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140857
Netlogon error
This is a multi-part message in MIME format.
------=_NextPart_000_000A_01C3A839.24DECF90
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
I had to reformat and re-install my SBS 2000 and following that I am =
getting the following Netlogon error for a few computers on my network:
Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5513
Date: 10/11/2003
Time: 20:12:12
User: N/A
Computer: SERVER
Description:
The computer V5 tried to connect to the server \\SERVER using the =
trust relationship established by the DOMAIN domain. However, the =
computer lost the correct security identifier (SID) when the domain was =
reconfigured. Reestablish the trust relationship.=20
How do I re-establish the trust relationship? Shall be grateful if =
someone can guide me on this.=20
Rajiv Khandelwal
------------------------------------
www.vardaan.net
------=_NextPart_000_000A_01C3A839.24DECF90
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252"><BASE=20
href=3D"file://C:\Program Files\Common Files\Microsoft =
Shared\Stationery\">
<STYLE>BODY {
BACKGROUND-POSITION: left top; FONT-SIZE: 12pt; COLOR: #000000; =
BACKGROUND-REPEAT: no-repeat; FONT-FAMILY: Arial
}
</STYLE>
<META content=3D"MSHTML 6.00.2800.1264" name=3DGENERATOR></HEAD>
<BODY bgColor=3D#ffffff>
<DIV>I had to reformat and re-install my SBS 2000 and following that I =
am=20
getting the following Netlogon error for a few computers on my =
network:</DIV>
<BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px">
<DIV>Event Type: Error<BR>Event Source: NETLOGON<BR>Event=20
Category: None<BR>Event=20
=
ID: 5513<BR>Date: 10/11/2003<BR>Time: 20:12:12=
<BR>User: N/A<BR>Computer: SERVER<BR>Description:<BR>The =
computer V5 tried to connect to the server <A=20
href=3D"file://\\SERVER">\\SERVER</A> using the trust relationship =
established=20
by the DOMAIN domain. However, the computer lost the correct security=20
identifier (SID) when the domain was reconfigured. Reestablish the =
trust=20
relationship. </DIV></BLOCKQUOTE>
<DIV>How do I re-establish the trust relationship? Shall be grateful if =
someone=20
can guide me on this. <BR><BR>Rajiv=20
Khandelwal<BR>------------------------------------<BR><A=20
href=3D"http://www.vardaan.net">www.vardaan.net</A></DIV></BODY></HTML>
------=_NextPart_000_000A_01C3A839.24DECF90-- Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140846
Email blocked
A user has had an email message returned with the following explanation:
Hi. This is the qmail-send program at gizmo02bw.email.bigpond.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
<username@domain.com.au>:
Connected to x.x.x.x but sender was rejected.
Remote host said: x.x.x.x Defined SPAM source: bl.spamcop.net
What does this mean ?
Thanks Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140842
RAID Configuration
Hi all,
I have a dell SBS 2000 server that has a raid configuration
the primary partition is 12gb, they have run oout of space
and i'd like to upgrade the disks.
Can i use a third party disk image utility such as ghost
to clone the drive? i think they are ide drives so
ghosting should not be a problem.
I have no experience with raid and am not sure of the
effects of doing this. I have read that you can possible
extend the partition but the other 2 are getting pretty
full as well.
AM i on the right track or way off the m,ark
Thanks
Leo Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140841
Network Broadcasts when TS Present
A week or so ago I needed to broadcast a reminder message to about 40 users.
Following suggestions made to me through this NG, I created a batch file
with a NET SEND commend, and used Scheduler to send it at the desired time.
Worked fine - except this particular client's LAN runs a separate
application Terminal Server. Users complained that it takes 15-20 clicks to
clear their screens of the broadcast message! Any work-arounds here?
(All PCs XP Pro, Office XP Pro on the TS.)
TIA,
Norm Hughes Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140840
Problem with Password Changes
For some reason, some users on my SBS 2K network have been having problems
changing their passwords. I have one user, running Windows 98, who changed
her password and now can't get validated by the Exchange Server. This same
user has no problems connecting to the Exchange Server from a Windows XP
machine, so I think it's OS-related. I tried deleting the *.pwl files on
the Win98 machine, to no effect. Both machines are running Outlook XP, so
it's not an Outlook difference.
In addition, I have another user (on a 2000 machine) who has to reset his
password 3 or 4 times (resetting to the same password each time) before the
change takes effect, i.e. before he can log into the machine with the new
password.
I had thought that this was related to the fact that the memory on the
server is low (1-2%), but apparently that's a normal effect for a server
running Exchange. So now I'm puzzled.
Is this an Active Directory problem of some kind? Can anyone tell me where
to start looking?
Shannon Rotz
Vancouver, BC Canada Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140839
SUS and Group Policy
Things seem to be working right but I think I might have
broken a few rules
to get there...
Here's what I did.
After installing SUS on our SBS2K I made a new OU
directly below the
"company.local" domain in Active Directory
called "Workstations". I then
moved all the client PC's that I wanted to be updated (ie
all but the server
and a remote client) out of the "Computers" default
container in Active
directory and into the Workstations OU. (This is where I
think I may have it
wrong). I then made a new GPO for the Workstations OU and
set windows update
to automatically download and install updates. I made a
seperate GPO in the
Domain Controllers OU for the server that just auto
downloads and notifies
when ready to install.
Although all the workstations have taken on the policy
(Windows Update
settings are reflecting the policy settings and are
greyed out) I'm thinking
that I shouldn't have moved the client PCs from the
Computers default
container in active directory. Should I have made a group
within the
Workstations OU and added the client computers to this
group? If so, should
it be a security group or a distribution group (whats the
difference)?
Thanks in advance,
Ryan Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140829
SBS2k vs 2003-Comparisons?
I am considering SBS2003 upgrade but I am not sure there
is any substantial gain here. I have a website we host
right now with one more in the future (~ 1yr), 1 remote
office, and 12 workstations.
I can not find anything that shows me any big advantage
SBS2003 has over SBS2k. I have heard one individual say
that Advanced Server 2003 was quite a piece of work;
Unfortunately, I do not know if it is part of SBS2003
premium ed.
Anybody know where I can find something to sway me one
way or another?
Thank You,
Paul Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140825
Backup to remove transaction logs
Hi there,
I have search for the best way to remove logs (E000xxxx)
and been pointed to the smallbizsever site and It suggests
to run full/normal backp on "Information store and system
state". Does anyone know whether this is the only
requirements to successfully backup and remove trans logs.
And whether this can be done when users are active or only
after hours.
Thanks Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140822
exchange issue
A couple of weeks ago a user's machine bluescreened and we
tried to fix driver that was at issue but finally ended up
doing a repair install. The user was able to log in to
the domain and use the files from the server but when she
tried to use exchange it said "address book not available"
or can't find Exchange server. We reintalled outlook,
deleted the outlook profile, and rejoined the domain.
still unable to get on the exchange server from this
machine. We tried to login with other users and get the
same message.
Any help would be appreciated.
Thanks
Bob Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140811
Saving Email contents
I have a SBS 2000 server, one of my clients running WinXP
Pro, has a lot of problems. I am planning on whipping his
machine out and reloading everything. How can I find out
where his email is, on the server or on his machine? He
cannot lose his email. Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140805
System Monitor
Hello -
I am benchmarking a SBS 2000 box using System Monitor.
Its a PIII 866 with 1.3 GB RAM. The Processor Queue
Length counter is covering consistently around 10. The %
Processor Time is near 10% (90% free) as well. I would
expect the % Processor Time counter to be higher, with
the relatively high Queue Length counter. This is over a
week. Microsoft suggests a bottleneck when the Queue
Length counter is greater than 2. Without checking each
thread, has anyone seen this behavior before?
Thanks - Steve Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140800
Static routing question
I have a main office with SBS, connected to the web (2nd
NIC), and I need to add a connection to an remote office
that I will reach through a router on my LAN (leasedline).
IP's assigned to the various interfaces on the routers and
servers.
SBS 1st NIC
IP 10.10.10.7
Mask 255.255.255.0
Default gateway none
SBS 2nd NIC
IP 192.168.16.5
Mask 255.255.255.0
Default gateway 192.168.16.1 (IP ADSL Router)
Terminal Server
IP 10.10.10.8
Mask 255.255.255.0
Default gateway 10.10.10.7
Router (Cisco 1600) on my LAN
IP 10.10.10.1
connected to:
Router (Cisco 1600) at my remote office
IP 10.10.11.1
At my remote office I have 8 client assigned static IP
addresses:
10.10.11.2 to 10.10.11.10 All of them have 10.10.11.1 as
their default gateway.
What I want is my clients to be able to connect to my
Terminal server at the SBS site using the remote desktop
connection client. I also want to be able to create
default TCP/IP ports for the printers installed on my
terminal sever that are located at the remote office
(10.10.11.20 and 10.10.11.21).
I'm I correct to think that the only thing missing is the
Route Add command (on my SBS)?
Route add -p 10.10.11.1 mask 255.255.255.0 10.10.10.1
Thanks in advance for any comments.
Victor. Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140799
Transaction logs/Backup
I have been trying to find out about removing transactions
logs as they are eating my disk space.
The recommendation points to a full backup and logs will
then disappear. Is this just the standard backup under
start/programs/accessories/system tools/backup on 2000.
Are you able to just back up information store.
Cheers Brett Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140784
Delay message
Users send mail out and get lots of return message from
server.
This is an automatically generated Delivery Status
Notification.
THIS IS A WARNING MESSAGE ONLY.
YOU DO NOT NEED TO RESEND YOUR MESSAGE.
Delivery to the following recipients has been delayed.
tom@thecomputerstoreinc.com Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140783
POP3 Connector
I am running SBS2000 and using the POP3 connector for Exchange. Not all of
my email accounts set up at the ISP go to the Exchange server in the end,
some individuals never connect to the server and use Outlook Express only.
However when someone connected to the Exchange server send an email to
someone within the company that is not connected to the Exchange Server they
receive an delivery failure notice from the Exchange server that that email
account doesn't exist. It is as if the Exchange sever never sends the email
past itself to the external mail server at the isp.
George Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140774
Health moniter alert
Help! I keep getting this message, but don't see anything
significant in any of my event viewer logs:
Application Log events: event received. Critical
condition. (WMI Status: 0 )1205032212375221
Any suggestions appreciated! Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140771
Adding SQL Component how to?
Our Windows 2000 sbs server was initially installed
without the SQL option, now I need to add this component.
There is no technet article for doing this, does anybody
have this simple procedure for me.
Cheers
Philip Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140769
DNS settings on WAN NIC
I would like to know what is the preferred or correct configuration of the
DNS settings on the WAN Nic on SBS2000. Should it be the DNS servers for
the ISP (example #1) or should it be the IP for the Internal DNS (example
#2)?
I have seen it both ways
Example #1 WAN
Use the following DNS server Addresses:
Preferred: 209.87.79.232
Alternate: 209.87.64.70
Example #2 WAN
Use the following DNS server addresses:
Preferred: 10.10.0.2
Alternate: <left blank>
Does either of these configurations have an advantage over the other for DNS
resolution? Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140768
ISA Intrusion Alert
In the last two days I've gotten this email 4 times. I setup the alert
about 6 months ago but it's not been triggered until now. What does it mean
when the source is local to the server? There are two NICs in the server.
ISA Server name: CEISERVER
ISA Server detected a well-known port scan attack from Internet Protocol
(IP) address 127.0.0.1. A well-known port is any port in the range of
1-2048. For more information about this event, see ISA Server Help Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140767
Migrating from SBS 2000 to Microsoft Server 2003
Is it possible to upgrade an SBS 2000 server to Windows
Server 2003 Enterprise Edition? Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140760
Getting login prompt opening intranet
No info in event viewer that I can see, regular web pages
open fine. But I have been prompted several times in
different places for login credentials when
opening/browsing the intranet. I'm guessing its a
permissions issue, any sharing to shorten my search would
be appreciated.
Thanks in advance
SeanD Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140757
Migrating IS store to a different drive
My SBS2003 installation placed Exchange and User files on the C:\ drive. Is
there a utility to move these items to the D:\? Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140751
Front Page Errors
Users who need to connect to an FTP site and who use Front
Page to publish changes on various websites cannot do so
after we installed a Windows 2000 Small Business Server.
Front Page just hangs when you try to open a website.
(Open internet explorer, click on file, edit with front
page.) I think it has something to do with the firewall
settings. Any ideas as to what I need to enable/disable,
adjust, install/uninstall, etc? Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140750
SBS2K & EDI
Whilst with one on my SBS 2K clients today they asked me about EDI
(Electronic Data Exchange)
I know what the initials stand for, and the very basics, but little else !!
Are there any faq's, or tutorials that I can be pointed at, preferably with
a UK and/or SBS bias, so I can look a little more knowledgable next time we
meet.
TA Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140734
SOFTWARE ASSURANCE
I PURCHASES SBS 2000 W/SA AND WOULD LIKE TO UPGRADE TO
SBS 2003, ANY INSIGHT ON HOW TO UTILIZE SA TO ACCOMPLISH
THIS AND GET THE MEDIA? Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140725
Shared Fax Exchange Server
I am planning to setup a brooktrout fax board with support
for upto 4 lines to use with MS shared fax.I have Small
Business Server 2000. The question I have is that is there
a way to route all the incoming faxes received on MS
Shared Fax to Exchange mailboxes without having to
purchase third party software? Any help or pointers in the
right direction would be greatly appreciated.
Lakshman. Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140722
Software Assurance and Upgrade Media
I purchased SBS 2000 in September 03 W/SA and am trying
how to get upgrade media to SBS 2003. Ant recomendations? Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140721
Laptop question. XP sp1, cannot find exchange server
Hello,
I noticed that on some users laptops, they are "losing" their lan
connections after standbying and resuming their laptops. I know that there
is a network connect timeout value on Win2k server connections, when you
open my computer you see a "disconnected network drive" but if you click the
drive, you see all your files. Is this same value affecting the user's
connections to the exchange server? It does not happen on the Desktop pcs.
What do you think? All the desktops are Win2k, laptops XP SP1.
John Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140719
Faxing multiple documents
Quick question regarding faxing multiple documents from SBS 2000 Shared faxing services. Is there a limit on the number of files a user can fax to one user at the same fax number at the same time. Say for instance Joe Blow wants to fax 35 different Word documents at the same time to the same fax number and user. Is this a possibility. I believe WinFax limits the number of documents to 12, and I am not aware if the SBS version has the same restrictions.
Thanks in advance for the assistance. Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140712
Enough Memory
When i tried to install SBS 2k the first time i got an
error message generated by the Operating System
saying "You do not have enough free memory to continue
with this installation".
Firstly do you have sufficient memory to install SBS?
HTH Robert Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140711
Sophos
We use Sophos Antivirus.
Some of the main players are Sophos, McCafee, Norton and
Trend.
HTH ROb Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140710
ISA Server timeout on evaluation copy
We run ISA server not from our SBS Domain Controller but
instead from a member server.
Prior to purchasing our copy of ISA server we have been
running an evalutation copy and all works well, internet
access is fine etc.
My problem is this:
The three month evaluation copy is about to run out and i
need to know wether when it runs out it will just kill ISA
altogther or will it be like Macromedia products and say
something like "Your evaluation copy has expired please
upgrade or punch in the serial-key which comes with a
valid product".
Does anyone know if this will be the case.
I would rather just be prompted to puch in a serial key as
installing and configuring ISA was a little frustrating
and time-consuming last time round. Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140709
ISA Server timeout on evaluation copy
We run ISA server not from our SBS Domain Controller but
instead from a member server.
Prior to purchasing our copy of ISA server we have been
running an evalutation copy and all works well, internet
access is fine etc.
My problem is this:
The three month evaluation copy is about to run out and i
need to know wether when it runs out it will just kill ISA
altogther or will it be like Macromedia products and say
something like "Your evaluation copy has expired please
upgrade or punch in the serial-key which comes with a
valid product".
Does anyone know if this will be the case.
I would rather just be prompted to puch in a serial key as
installing and configuring ISA was a little frustrating
and time-consuming last time round. Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140708
Memory Problem on SBS Server
I have an SBS Server which is getting very low on memory. It looks like the
biggest portion of memory is going to the Exchange Information Store.
The company has committed to buying a new server in the new year, but of
course I need to manage the situation now. Can anyone tell me a way I can
free up some memory via maintenance or configuration, or is the situation
not remediable except by adding new memory?
Shannon Rotz
Vancouver, BC Canada Tag: SBS 2000 migration to separate Windows 2000 & Exchange 2000 Tag: 140702
Hi All,
I have a machine running Small Business Server 2000 and I am now running it
with almost 70 users, needless to say I am getting licensing error messa