HELP!!!! Attempting to restore a SBS2000 System
Hi All,
Horrible problem. This system suffered a mirrored disc volume crash - both
drives came up with disc errors & had to be replaced.
The first drive in the raid was well and truly gone, the second had 1 bad
sector in a bad location. The hw vendor retrieved the data using Ghost and
put it back onto two new HDD's (SATA). Nice, but C is now D and D is now C.
There is also an E partition with *lots* of valuable stuff on.
How do I fix the drive letter assignments?
I have looked at various KB articles and they all relate to running systems.
This isn't running - I have to restore on to C as C otherwise the system
won't log on.
Is there a way to fix the drive letter assignments?
If I do a reinstall of the system onto what was C and is now D, then windows
won't let me do an AD restore. If I follow the KB article to reassign the
drive letters, it won't let me log on.
Thanks in advance...
- Tim
PS the system backups are on the E partition. There are other backups, but
the system went down during a backup and left the most recent corrupt. Tag: imap access sbs2k Tag: 145980
Shared Modem
SBS 2000 had Shared Modem Service
SBS 2003 does not
what are others doing for their business or customers that use this functionality
Thanks
Asher Tag: imap access sbs2k Tag: 145974
Trend Micro Antivirus CSM suite SMB, where to buy
After lots of legwork, I finally found what/where to buy the newest shipping
Trend AV software for SBS. I don't think it is specifically *for* SBS, but it
supports it. Here's what you want to buy, according to the Trend sales rep.
Make sure it is *not* simply the Client/Server/Messaging Suite. Get the one
that says, "for Small and Medium Business."
http://www.trendmicro.com/en/products/suites/csm-smb-suite/evaluate/overview.h
tm
Trend Micro Client/Server/Messaging Suite for Small and Medium Business.
CDW sells it, but you'll need to talk with a volume licensing specialist, not
just the first sales person you reach.
CDW part # 564861 TREND CLNT/SRV/MESSG STE SMB
Trend Micro part # CMSBWWE2XLDULNNAG
Price for 5-25 users: $41.92/user account, not per computer
It is the preferred product for SBS. It requires only one install for the
suite rather than three separate installs for each component. Also, the price
has been lowered.
If you like printed docs, they cost $20.00 including the cd.
CDW part # 561401 TREND CLNT/SRV/MESSG STE SMB MEDIA
Trend Micro part # CMSBWWE2XSAZPNNZZ
Hope this helps someone. It took me many hours to get to the bottom of this. I
have no affiliation with any of the above mentioned businesses, just an end
user.
David F. Tag: imap access sbs2k Tag: 145941
Antivirus :- SAV or F-Secure
Hi,
I've been using Symantec for antivirus for the last 6 but i got this
customer whose keen on f-secure.
Well for starters i know Sav 8.6 by default excludes all the exchange aware
directories does f-secure do this.
I have never used it but people swear by it just as i swear by Symantec.
Any comparisons btw both will be appreciated.
Thank you Tag: imap access sbs2k Tag: 145940
Roaming profile problem
I have the following urgent roaming profile problem for a user running XP
Pro SP1 on SBS2k:
When logging off the users gets the message that 'his roaming profile can't
be updated'.
When logged in, Outlook requires the user name, domain and password again.
He can't access shared drives - gets the error that the user does not exist.
The user has been on the system for months and then this suddenly crops up.
I have had a similar problem before with another user on another SBS system.
Anyone any ideas?
Thanks
Julian Tag: imap access sbs2k Tag: 145937
Exchange with Windows XP & 2000
G'day,
Can small business server (Exchaneg portion for central
outlook) be set up to link both windows xp and windows
2000 operating systems? I have bene told no but need
clarification. Tag: imap access sbs2k Tag: 145933
SMTP Communications problem W2K3 SBS
Hi - I am running Windows 2003 SBS server and having
configured the exchange server to send via smtp and
receive via the exchange pop3 connecter I am getting the
following error when a client tries to send an email
Recipient not authorised [recipient rejected due to no
authorised destination groups]
I can't find any log of this error on the net. Can
anyone help?
Thanks,
Darren Tag: imap access sbs2k Tag: 145920
Exchange Help
Where's the best source for setup/configuration information on Exchange in
SBS 2000/2003 for a novice adminsitrator? Tag: imap access sbs2k Tag: 145918
pop3 connector
Hi
I have a customer with sbs2k. The 'retrieve now' button is
missing on the pop3 connector props.
Restarting/reinstalling pop3 connector fails to resolve
the issue.
Any ideas? Tag: imap access sbs2k Tag: 145911
Printers on TS
This is a multi-part message in MIME format.
------=_NextPart_000_00D5_01C3BF23.895C1620
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
In my SBS2000 environment, there is a separate box being a TS in app =
mode.
Where would I go to find a list of printers that the remote user can use =
and successfully print from within the TS app?
Thanks!
--=20
Kevin3NF
Sick of all that junk filling up your mailbox?
http://spamarrest.com/affl?2967001
------=_NextPart_000_00D5_01C3BF23.895C1620
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1276" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>In my SBS2000 environment, there is a =
separate box=20
being a TS in app mode.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Where would I go to find a list of =
printers that=20
the remote user can use and successfully print from within the TS=20
app?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks!</FONT></DIV><FONT face=3DArial =
size=3D2>
<DIV><BR>-- <BR>Kevin3NF</DIV>
<DIV> </DIV>
<DIV>Sick of all that junk filling up your mailbox?<BR><A=20
href=3D"http://spamarrest.com/affl?2967001">http://spamarrest.com/affl?29=
67001</A></DIV>
<DIV> </DIV>
<DIV><BR></FONT> </DIV></BODY></HTML>
------=_NextPart_000_00D5_01C3BF23.895C1620-- Tag: imap access sbs2k Tag: 145908
pop3 connector
I am having a serious issue with exchange. We download mail with a pop3
connector. All of a sudden we are having mail kicked back to senders as
undeliverable. If I stop the pop3 connector from trying to download from our
ISP it sits in the ISP mail server and we can access it from internet mail.
As soon as exchange tries to download it with the pop3 connector it bounces
back to the sender. I have reloaded exchange deleted the pop3 connector then
reloaded it. Still it is the same issue.
Any ideas or solutions would be greatly appreciated.
Lanny Tag: imap access sbs2k Tag: 145907
Bad email in Exchange
I have a bad email in my inbox, I cannot start up outlook
to delete it, when I go to the exchange server to my inbox
folder there is one email in there that I cannot delete.
How can I fix this problem? I am logged into the exchange
server as the user who has a bad email, so there is full
control of the folder, but I cannot do anything to this
one email. When I press the delete button nothing happens
I cant move it out of the folder I cant do anything.. Can
someone help me out? I am no Exchange expert, I set it up
on my SBS server so we can use email through our domain
name, other than that I dont know how to manage the emails
other than that. Can someone provide some info? Thanks! Tag: imap access sbs2k Tag: 145905
Exchange Issue.
I'll start with the set up:
SBS 2000 Running Exchange using the Pop3 Connector. All of our mail accounts
are offsite pop3 accounts that exchange harvests the emails from.
The Problem:
Up until last week my users were able to email to any domain. Starting last
Friday, everyone in the office now gets the following error when trying to
email to somebody@isp.com :
" Your message did not reach some or all of the intended recipients.
Subject: FW: test
Sent: 12/10/2003 9:35 AM
The following recipient(s) could not be reached:
techsupport@isp.com on 12/10/2003 9:35 AM
You do not have permission to send to this recipient. For
assistance, contact your system administrator.
<localserver.com #5.7.1>"
I've searched google and Microsoft and it seems that MOST people claim this
is a Blacklist issue. I find no evidence that indicates we are blacklist,
nor can I understand why we would be since we aren't the ones who host our
email. It would appear from the instantaneousness of the error mail being
returned that its not even getting out of our office. The headers are
cryptic mush:
"Microsoft Mail Internet Headers Version 2.0
From: postmaster@ourdomain.com
To: user@ourdomain.com
Date: Wed, 10 Dec 2003 09:35:26 -0600
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="9B095B5ADSN=_01C3BAFF657EFDF90000033CXXX?XXX?XXX.corp"
Message-ID: <PDVniSnRM00000023@XXX-XXX-XXX.corp.ourdomain.com>
Subject: Delivery Status Notification (Failure)
--9B095B5ADSN=_01C3BAFF657EFDF90000033CXXX?XXX?XXX.corp
Content-Type: text/plain; charset=unicode-1-1-utf-7
--9B095B5ADSN=_01C3BAFF657EFDF90000033CXXX?XXX?XXX.corp
Content-Type: message/delivery-status
--9B095B5ADSN=_01C3BAFF657EFDF90000033CXXX?XXX?XXX.corp
Content-Type: message/rfc822
Content-Class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Subject: FW: test
Date: Wed, 10 Dec 2003 09:35:25 -0600
X-MIMEOLE: Produced By Microsoft Exchange V6.0.4417.0
Message-ID:
<088BD06CF65F8B419EEA2573B2A0C5CC240632@XXX-XXX-XXX.corp.ourdomain.com>
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: test
thread-index: AcO/LhzukxfZCn/6RdiXwt8lYWF10AAAAOBZAAAD1IAAAT/1oA==
From: "USER" <user@ourdomain.com>
To: <techsupport@isp.com>
--9B095B5ADSN=_01C3BAFF657EFDF90000033CXXX?XXX?XXX.corp--
My MAIL provider claims our ISP (yes, yes I know....I'm working on it...) is
at fault, and the ISP claims the MAIL provider is, and I don't think either
one of them have a clue. Can somebody please tell me where to start looking
at what may be broken? We can send email to pretty much anybody else at ANY
other domain, but all emails to the ISP domain get bounced back or it seems
not even out of the office.
I'll take any advice at this point.
Thank you. Tag: imap access sbs2k Tag: 145903
adding xp pro client to sbs2000
I'm having problems getting our XP Pro clients to connect to SBS2000 in the
same way that our 98/ME/2000 clients do. I couldn't get the 'magic disk' to
work on the XP machine so I setup the XP machine's network settings
manually. I've added the XP machine to the SBS2000 server and the XP machine
can connect, share resources, etc. but the XP machine doesn't use the login
script that forces software installation, mapped drives, etc. How do I add
the login script to the XP machine? Tag: imap access sbs2k Tag: 145896
Problems setting up NT4ws
I'm trying to add a NT4WS to a SBS2k using the setup disk. The NT4WS is part
of a existing NT4 network I have static IPs (no DHCP server). I'm migrating
the existing network to SBS (no DHCP)there are 8 computers in all on the
NT4 network most are NT4WS, I added one computer (win95) with no problems
setup the exchange mail and internet with no problems. When I run the setup
disk it stops and asks if I want to UN-JOIN the existing Domain I say "YES"
and then it tells me it can't find the DC. The network properties have been
changed to get ip from DHCP server and can no longer find the old server.
How do I stop this from changing the network prop.
Thanks
tcb Tag: imap access sbs2k Tag: 145891
Internet through VPN
Hi
A user is connecting through VPN and is unable to connect
to the Internet. He is getting a 403 forbidden by ISA
firewall and our firewall stops no sites!
I have changed the proxy settings so that it is coming
through our server and have also tried unchecking the use
default gateway obx but get the same problem
any ideas?!?
Mark Tag: imap access sbs2k Tag: 145886
ISA Server Issues
I have an issue with the ISA Server. It appears that after installation of
Service Packs or Hotfixes that the ISA Listeners on Port 80 and 443 were
re-enabled. Also, I noticed that port 1720 (Microsoft Netmeeting) is open on
my SBS Servers. There are no packet filters allowing this in. My
understanding was that if there wasn't a packet filter then it would deny
access! My concern is that what other ports are open by default on ISA
server!
Anyone else noticed these behaviors?
Thanks,
John Tag: imap access sbs2k Tag: 145884
ISA Security Question
If you uncheck the "Ask all unauthenitcated user for
identification" on the incoming web request tab do you
open the network up to anyone? This was a fix from MS so
I do not get the prompts for passwords multiple times.
Thanks.
Peter V Tag: imap access sbs2k Tag: 145881
Cisco PIX Firewall
I recently added a Cisco Pix Firewall so we could use Cisco's secure
3DeS VPN Tunnels.
The pix doesn't want to work with 2 nics in the SBS2000 Server. I
reconfiged for using only 10.0.0.2 and disabled the second NIC.
Now I'm getting NetLogon DNS Event 5774 Errors...
Anyone know where to start to make all of the necessary changes from
TWO NICS down to ONE NIC???
-Dennis Tag: imap access sbs2k Tag: 145880
removing router
I have sbs2k running just fine, I was using a linksys router BEFSR41
router...and life was good.
2 stable years into this solution, users started having internet connection
problems, intermediately Internet connection would drop, It seemed like
router was the device causing this, I replaced the unit with a newer version
of the same router (v3), every thing worked just fine with the exception of
the VPN in to the box, After calling Linksys support there seems to be an
issue with this newer version V3 unit...as not be "stable for VPN" go
figure newer version isn't as stable.
So in hopes of getting VPN back I am considering hooking the cable modem
directly to the external nic, I do not want to re-run ICW, and I am lost
after trying to hard code the IP address/ sub net, and gateway from the
router (dynamically received from the ISP to the router) on to the external
nic. Tag: imap access sbs2k Tag: 145878
XP pro client cant see active directory
I have 2003SBS PDC w/xp pro clients and NONE of my clients (although they seem to authenticate just fine) can browse active directory objects or even see active directory on the server. I get permission denied errors connecting to server or client shares. I used the network id wizard to join the domain and my users are all copies of the admin account. I know I'm doing something silly that can be easily fixed but I can't figure it out. I have changed the NICs and Switches thinking its hardware but to no avail. I have one nic in the server and Terminal Services loaded. DNS-wise I have the server pointing to itself and the clients pointing only to the server. Tag: imap access sbs2k Tag: 145875
Auto install Client apps when joining a computer to SBS 2003
I am setting up SBS 2003 so that when I join computers to the SBS, Office XP and other software are installed automatically. I have added the software to the clientapps directory and all users have read/write access. It works great, however my problem is this. I want a complete install without user interface, but I cannot figure out in what file to place the product key so that this screen does not appear during the setup.
Can any one help? Tag: imap access sbs2k Tag: 145872
Helth Monitor alert
Hi all,
Getting Health Monitor Alert - System Processor Use: Warning
condition WMI status:0. It's because the processor queue is set to alert if
the length is >2. Do I need to worry about this or change the queue length?
The Server should be more than powerful enough - Dell dimension 8200 with a
Pentium 4, 1.8GHz CPU & 1.5 Gb RAM. Another problem which is baffling me are
event id 1001, 1008 - source IISInfoCtrs & Perflib respectively. I've
checked them on the Kb & it's something to do with the performance counters,
which I've never been into. These errors have occurred after event id 2003,
& following Kb 267831. Has anyone come across this & give advice? I don't
want to dig the hole deeper.
TIA,
Gary Tag: imap access sbs2k Tag: 145871
Help! Changing out Computers
We are running SBS2000, 20 user.
We are replacing 5 older computers with new systems. We will be installing
the new computers on the network with the old ones still on the network to
make the transition easier for the users. The computers will have different
names than the older ones. Will there be an issue with this plan?
Thank you for your help in advance!
Candace Sparks Tag: imap access sbs2k Tag: 145867
VPN
I have configured my Cisco 837 Router to accept VPN using Cisco VPN
Client. I have a Network with a SBS2K server.
When I connect from home (Windows ME machine) using my Network logon
and password I can ping
devices on my network, I can even search for devices but when I try
and connect to them, it
says must supply password, 'Resource:\\COMPUTERNAME\1PC$, Password: '
What do I need to do so I can browse the network properly (ie as if I
was in the office).
Thank you
Mark Tag: imap access sbs2k Tag: 145865
Internet Connection error - icwlog.txt
Hi,
I've run through the SBS internet connection wizard with a
dedicatated broadband & router configuration. However the
process keeps falling with an interupt message when the
wizard tr register connection. As below
"The Internet Connection wizard was interrupted because of
an error or user intervention. Details have been recorded
in the file Icwlog.txt which can be found in <path>".
I have searched and found various technotes relating to
this type of error, plus other entries in the forum but my
icwlog.txt contains errors beginning at line
calling _ResetDNSListeners (dynamic).
Error 0x80072550 returned from call to _ResetDNSListeners
().
-
any help would be greatly appreciated. Full icwlog.txt
below with highlight around problem line.
10/12/2003 11:50
calling CNetCommit::Commit (2320024).
calling CoCreateInstance (PropertyPagePropertyBag).
Call to CoCreateInstance () returned ok.
calling RegOpenKeyEx (HKEY_LOCAL_MACHINE,
SOFTWARE\Microsoft\BackOffice\Connectivity\ICW).
Call to RegOpenKeyEx () returned ok.
calling RegQueryValueEx (Last_Hardware_Option).
Call to RegQueryValueEx () returned ok.
calling WriteInt4 (185707440, 3147E58D-2F9E-44D3-967C-
CA5E9F76F33B, 3, 0).
Return value from call to WriteInt4() not logged.
calling _GetRegStringValue (Last_1st_Nic_Guid).
Return value from call to _GetRetStringValue() not logged.
calling _GetRegStringValue (Last_2nd_Nic_Guid).
Return value from call to _GetRetStringValue() not logged.
calling WriteString (185707440, 1CBC9355-81AD-4D26-8EA6-
989A55C5EEB9, {B9F6032B-5CF6-4225-9329-12F984158001}, 0).
Return value from call to WriteString() not logged.
calling WriteString (185707440, 1CBC9356-81AD-4D26-8EA6-
989A55C5EEB9, {7D174609-1322-49D2-B7F7-0A14A2D7BC6F}, 0).
Return value from call to WriteString() not logged.
calling GetDNSAddresses ({7D174609-1322-49D2-B7F7-
0A14A2D7BC6F}).
Return value from call to GetDNSAddresese() not logged.
calling _GetDefaultGateway ({7D174609-1322-49D2-B7F7-
0A14A2D7BC6F}).
Return value from call to GetDefaultGateway() not logged.
calling WriteString (185707440, 450F273D-B279-4B7D-A506-
9D9ED54ED702, 213.120.62.98, 0).
Return value from call to WriteString() not logged.
calling WriteString (185707440, 450F273E-B279-4B7D-A506-
9D9ED54ED702, 213.120.62.99, 0).
Return value from call to WriteString() not logged.
calling RegCloseKey ().
Return value from call to RegCloseKey() not logged.
calling PPPBag->QueryInterface (IPropertyPagePropertyBag).
Call to PPPBag->QueryInterface () returned ok.
calling CNetCommit::Common (2320024).
calling ReadInt4 (2320024, 3147E58D-2F9E-44D3-967C-
CA5E9F76F33B, 456544, 456516).
Call to ReadInt4 () returned ok.
calling ReadString (2320024, 1CBC9355-81AD-4D26-8EA6-
989A55C5EEB9).
Return value from call to ReadString() not logged.
calling ReadString (2320024, 1CBC9356-81AD-4D26-8EA6-
989A55C5EEB9).
Return value from call to ReadString() not logged.
calling DoFulltime (2320024).
calling ReadString (2320024, 1CBC9356-81AD-4D26-8EA6-
989A55C5EEB9).
Return value from call to ReadString() not logged.
calling ReadString (2320024, 1CBC9355-81AD-4D26-8EA6-
989A55C5EEB9).
Return value from call to ReadString() not logged.
calling == ({B9F6032B-5CF6-4225-9329-12F984158001},
{7D174609-1322-49D2-B7F7-0A14A2D7BC6F}).
calling _IsNICStatic ({B9F6032B-5CF6-4225-9329-
12F984158001}).
Return value from call to _IsNICStatic() not logged.
calling ReadString (2320024, 450F273C-B279-4B7D-A506-
9D9ED54ED702).
Return value from call to ReadString() not logged.
calling IsValidIP (217.34.58.246).
Return value from call to IsValidIP() not logged.
calling ReadString (2320024, 450F273D-B279-4B7D-A506-
9D9ED54ED702).
Return value from call to ReadString() not logged.
calling ReadString (2320024, 450F273E-B279-4B7D-A506-
9D9ED54ED702).
Return value from call to ReadString() not logged.
calling IsValidIP (213.120.62.98).
Return value from call to IsValidIP() not logged.
calling IsValidIP (213.120.62.99).
Return value from call to IsValidIP() not logged.
calling CLSIDFromString ({7D174609-1322-49D2-B7F7-
0A14A2D7BC6F}).
Call to CLSIDFromString () returned ok.
calling ClearAllGatewaysExcept (2320024, 454348).
calling ClearDefaultGateway ({B9F6032B-5CF6-4225-9329-
12F984158001}).
calling CLSIDFromString ({B9F6032B-5CF6-4225-9329-
12F984158001}).
Call to CLSIDFromString () returned ok.
calling ClearDefaultGateway (454128).
calling SetNetConfig (454128, -1.-1.-1.-1, , ).
calling CoCreateInstance (CNetCfg).
Call to CoCreateInstance () returned ok.
calling spNetCfg->QueryInterface (INetCfgLock).
Call to spNetCfg->QueryInterface () returned ok.
calling spNetCfgLock->AcquireWriteLock (1000, BO ICW).
Call to spNetCfgLock->AcquireWriteLock () returned ok.
calling spNetCfg->Initialize (0).
Call to spNetCfg->Initialize () returned ok.
calling spNetCfg->FindComponent (ms_tcpip, 454028).
Call to spNetCfg->FindComponent () returned ok.
calling spNetCfgComponent->QueryInterface
(INetCfgComponentPrivate).
Call to spNetCfgComponent->QueryInterface () returned ok.
calling spNetCfgComponentPrivate->QueryNotifyObject
(ITcpipProperties).
Call to spNetCfgComponentPrivate->QueryNotifyObject ()
returned ok.
calling spTcpipProperties->GetIpInfoForAdapter (454128,
454080).
Call to spTcpipProperties->GetIpInfoForAdapter () returned
ok.
calling spTcpipProperties->SetIpInfoForAdapter (454128,
761352, DefGw=;GwMetric=1;IfMetric=1;DNS=;WINS=;).
Call to spTcpipProperties->SetIpInfoForAdapter () returned
ok.
calling spNetCfg->Apply ().
Call to spNetCfg->Apply () returned ok.
calling CoTaskMemFree (761352).
Return value from call to CoTaskMemFree() not logged.
calling spNetCfg->Uninitialize ().
Return value from call to spNetCfg->Uninitialize() not
logged.
calling spNetCfgLock->ReleaseWriteLock ().
Return value from call to spNetCfgLock->ReleaseWriteLock()
not logged.
Call to SetNetConfig () returned ok.
Call to ClearDefaultGateway () returned ok.
Call to ClearDefaultGateway () returned ok.
calling ClearDefaultGateway ({B9F6032B-5CF6-4225-9329-
12F984158001}).
calling CLSIDFromString ({B9F6032B-5CF6-4225-9329-
12F984158001}).
Call to CLSIDFromString () returned ok.
calling ClearDefaultGateway (454128).
calling SetNetConfig (454128, -1.-1.-1.-1, , ).
calling CoCreateInstance (CNetCfg).
Call to CoCreateInstance () returned ok.
calling spNetCfg->QueryInterface (INetCfgLock).
Call to spNetCfg->QueryInterface () returned ok.
calling spNetCfgLock->AcquireWriteLock (1000, BO ICW).
Call to spNetCfgLock->AcquireWriteLock () returned ok.
calling spNetCfg->Initialize (0).
Call to spNetCfg->Initialize () returned ok.
calling spNetCfg->FindComponent (ms_tcpip, 454028).
Call to spNetCfg->FindComponent () returned ok.
calling spNetCfgComponent->QueryInterface
(INetCfgComponentPrivate).
Call to spNetCfgComponent->QueryInterface () returned ok.
calling spNetCfgComponentPrivate->QueryNotifyObject
(ITcpipProperties).
Call to spNetCfgComponentPrivate->QueryNotifyObject ()
returned ok.
calling spTcpipProperties->GetIpInfoForAdapter (454128,
454080).
Call to spTcpipProperties->GetIpInfoForAdapter () returned
ok.
calling spTcpipProperties->SetIpInfoForAdapter (454128,
188047656, DefGw=;GwMetric=1;IfMetric=1;DNS=;WINS=;).
Call to spTcpipProperties->SetIpInfoForAdapter () returned
ok.
calling spNetCfg->Apply ().
Call to spNetCfg->Apply () returned ok.
calling CoTaskMemFree (188047656).
Return value from call to CoTaskMemFree() not logged.
calling spNetCfg->Uninitialize ().
Return value from call to spNetCfg->Uninitialize() not
logged.
calling spNetCfgLock->ReleaseWriteLock ().
Return value from call to spNetCfgLock->ReleaseWriteLock()
not logged.
Call to SetNetConfig () returned ok.
Call to ClearDefaultGateway () returned ok.
Call to ClearDefaultGateway () returned ok.
Call to ClearAllGatewaysExcept () returned ok.
calling ClearDefaultGateway ({B9F6032B-5CF6-4225-9329-
12F984158001}).
calling CLSIDFromString ({B9F6032B-5CF6-4225-9329-
12F984158001}).
Call to CLSIDFromString () returned ok.
calling ClearDefaultGateway (454292).
calling SetNetConfig (454292, -1.-1.-1.-1, , ).
calling CoCreateInstance (CNetCfg).
Call to CoCreateInstance () returned ok.
calling spNetCfg->QueryInterface (INetCfgLock).
Call to spNetCfg->QueryInterface () returned ok.
calling spNetCfgLock->AcquireWriteLock (1000, BO ICW).
Call to spNetCfgLock->AcquireWriteLock () returned ok.
calling spNetCfg->Initialize (0).
Call to spNetCfg->Initialize () returned ok.
calling spNetCfg->FindComponent (ms_tcpip, 454192).
Call to spNetCfg->FindComponent () returned ok.
calling spNetCfgComponent->QueryInterface
(INetCfgComponentPrivate).
Call to spNetCfgComponent->QueryInterface () returned ok.
calling spNetCfgComponentPrivate->QueryNotifyObject
(ITcpipProperties).
Call to spNetCfgComponentPrivate->QueryNotifyObject ()
returned ok.
calling spTcpipProperties->GetIpInfoForAdapter (454292,
454244).
Call to spTcpipProperties->GetIpInfoForAdapter () returned
ok.
calling spTcpipProperties->SetIpInfoForAdapter (454292,
187934968, DefGw=;GwMetric=1;IfMetric=1;DNS=;WINS=;).
Call to spTcpipProperties->SetIpInfoForAdapter () returned
ok.
calling spNetCfg->Apply ().
Call to spNetCfg->Apply () returned ok.
calling CoTaskMemFree (187934968).
Return value from call to CoTaskMemFree() not logged.
calling spNetCfg->Uninitialize ().
Return value from call to spNetCfg->Uninitialize() not
logged.
calling spNetCfgLock->ReleaseWriteLock ().
Return value from call to spNetCfgLock->ReleaseWriteLock()
not logged.
Call to SetNetConfig () returned ok.
Call to ClearDefaultGateway () returned ok.
Call to ClearDefaultGateway () returned ok.
calling SetDefaultGateway (454348, 217.34.58.246).
calling SetNetConfig (454348, 217.34.58.246, , ).
calling CoCreateInstance (CNetCfg).
Call to CoCreateInstance () returned ok.
calling spNetCfg->QueryInterface (INetCfgLock).
Call to spNetCfg->QueryInterface () returned ok.
calling spNetCfgLock->AcquireWriteLock (1000, BO ICW).
Call to spNetCfgLock->AcquireWriteLock () returned ok.
calling spNetCfg->Initialize (0).
Call to spNetCfg->Initialize () returned ok.
calling spNetCfg->FindComponent (ms_tcpip, 454248).
Call to spNetCfg->FindComponent () returned ok.
calling spNetCfgComponent->QueryInterface
(INetCfgComponentPrivate).
Call to spNetCfgComponent->QueryInterface () returned ok.
calling spNetCfgComponentPrivate->QueryNotifyObject
(ITcpipProperties).
Call to spNetCfgComponentPrivate->QueryNotifyObject ()
returned ok.
calling spTcpipProperties->GetIpInfoForAdapter (454348,
454300).
Call to spTcpipProperties->GetIpInfoForAdapter () returned
ok.
calling spTcpipProperties->SetIpInfoForAdapter (454348,
749792,
DefGw=217.34.58.246;GwMetric=1;IfMetric=1;DNS=;WINS=;).
Call to spTcpipProperties->SetIpInfoForAdapter () returned
ok.
calling spNetCfg->Apply ().
Call to spNetCfg->Apply () returned ok.
calling CoTaskMemFree (749792).
Return value from call to CoTaskMemFree() not logged.
calling spNetCfg->Uninitialize ().
Return value from call to spNetCfg->Uninitialize() not
logged.
calling spNetCfgLock->ReleaseWriteLock ().
Return value from call to spNetCfgLock->ReleaseWriteLock()
not logged.
Call to SetNetConfig () returned ok.
Call to SetDefaultGateway () returned ok.
calling SetDNSForwarders (213.120.62.98, 213.120.62.99).
calling RegOpenKeyEx (HKEY_LOCAL_MACHINE,
SYSTEM\CurrentControlSet\Services\DNS\Parameters).
Call to RegOpenKeyEx () returned ok.
calling RegSetValueEx (Forwarders, 213.120.62.98
213.120.62.99).
Call to RegSetValueEx () returned ok.
calling RegSetValueEx (IsSlave, 0).
Call to RegSetValueEx () returned ok.
calling RegSetValueEx (ForwardingTimeout, 5).
Call to RegSetValueEx () returned ok.
calling RegCloseKey ().
Return value from call to RegCloseKey() not logged.
calling _RestartService (DNS).
Call to _RestartService () returned ok.
Call to SetDNSForwarders () returned ok.
calling _IsServiceInstalled (DHCPServer).
calling LoadLibrary (dhcpsapi.dll).
calling GetProcAddress (DhcpRpcFreeMemory).
Call to GetProcAddress () returned ok.
calling GetProcAddress (DhcpSetServerBindingInfo).
Call to GetProcAddress () returned ok.
calling GetProcAddress (DhcpGetServerBindingInfo).
Call to GetProcAddress () returned ok.
calling DhcpGetServerBindingInfo (127.0.0.1, 0, 454308).
Call to DhcpGetServerBindingInfo () returned ok.
calling DhcpRpcFreeMemory (638952).
Return value from call to DhcpRpcFreeMemory() not logged.
calling FreeLibrary (1917452288).
Return value from call to FreeLibrary() not logged.
calling GetIPFromAdapterGuid ({B9F6032B-5CF6-4225-9329-
12F984158001}).
Call to GetIPFromAdapterGuid () returned ok.
calling PrepareForResetDNSListeners ().
Call to PrepareForResetDNSListeners () returned ok.
calling _ResetDNSListeners (dynamic).
***********************************************************
*
Error 0x80072550 returned from call to _ResetDNSListeners
().
calling _SetRegStringValue (HKEY_LOCAL_MACHINE,
SOFTWARE\Microsoft\BackOffice\Connectivity\ICW,
Last_2nd_Nic_Guid, {7D174609-1322-49D2-B7F7-0A14A2D7BC6F}).
Return value from call to _SetRegStringValue() not logged.
calling _SetRegStringValue (HKEY_LOCAL_MACHINE,
SOFTWARE\Microsoft\BackOffice\Connectivity\ICW,
Last_1st_Nic_Guid, {B9F6032B-5CF6-4225-9329-12F984158001}).
Return value from call to _SetRegStringValue() not logged.
Error 0x80072550 returned from call to DoFulltime().
calling ::RegCreateKeyEx (HKEY_LOCAL_MACHINE,
SOFTWARE\Microsoft\BackOffice\Connectivity\ICW).
Return value from call to ::RegCreateKeyEx() not logged.
calling RegSetValueEx (Last_Hardware_Option, 3).
Return value from call to RegSetValueEx() not logged.
calling RegCloseKey ().
Return value from call to RegCloseKey() not logged.
Error 0x80072550 returned from call to CNetCommit::Common
().
Error 0x80072550 returned from call to CNetCommit::Commit
(). Tag: imap access sbs2k Tag: 145863
Urgent - Can I get remote acess to server administrator on SBS2K
I have Administrator rights on all our systems.
We have a problem with our server & I am not in the office can I get access
to the server admin console?
The problem we had was then a user tried to open folders on the server a
message popped up saying "their are no available logons at this time"
We have rebooted the server and when the users started their pc's it took
about 10 mins for the pc to load personal settings & when they had loaded up
they are crashing when using many different file types?
--
Regards
Simon Hardstaff
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.548 / Virus Database: 341 - Release Date: 05/12/2003 Tag: imap access sbs2k Tag: 145862
Terminal Service over Web
I tried to connect to the SBS server over the web by typing
http:\\servername\myconsole
I get a screen with two buttons: connect and disconnect and a large area
below the buttons with a small icon which is not readable. When I push the
connect button, the system seems to not work (task manager reports program
not responding for many minutes).
TS in admin mode works fine using the TS client program, I was just trying
to get it to work over the web so I can admin the server if necessary while
away from the office.
Any one seen this before? Tag: imap access sbs2k Tag: 145860
SMTP Queues SBS 2K
We have a small network (25 users) all using win2k & a SBS 2k server, this
connects to the outside world via a linux firewall, if the firewall (or the
ADSL line) goes down any mail sent during this time ends up in the
destination unreachable queue, understandable, however all subsequent
outgoing mail ends up there also, & the only way to move them is to stop &
restart the SMTP service, any ideas why this is happening? and more
importantly how to stop from happening? & all firewall hardware & software
has been replaced anyway, however we are able to produce this behaviour at
will by simply rebooting the firewall or disconnecting the adsl line, as
soon as there is no connection outgoing mails go into the destination
unreachable queue & stay there and all mail sent after this even though the
connection is back up go in there as well, we can clear them (usually) by
stopping & starting SMTP service but this shouldn't happen?
Any & all suggestions gratefully recieved, I don't have all that much hair
left!
__________________________________________________________________ Mike
ICQ#: 122232506 Current ICQ status: + More ways to contact me
__________________________________________________________________ The wise
man learns more from his enemies than a fool does from his friends. -
Chinese Proverb Tag: imap access sbs2k Tag: 145857
SBS remote office > Exchange head office...?
Hi all,
Theoretical set-up - looking for advice on feasibility and/or potential
problems [indeed, if this is workable!]
Remote Office:
6 users
Currently running bog-standard W2K Server
Outlook clients connecting directly to individual POP3 mailboxes at ISP - NO
internal mail whatsoever
Broadband connection via Broadband Router on LAN - 512k ADSL
Head Office:
W2K Server
Exchange2K Server
Cisco 1700 Router
Cisco PIX 515E Firewall
Mailsweeper
Websweeper
McAffee EPolicy Orchestrator
McAffee Virusscan
Broadband is 2Mb SDSL
Customer is looking to have the Remote Office link with the Head Office in
the following way:
1] ALL email either incoming or outgoing to go via Head Office - they [at
present] are looking for all internal mail within the Remote Office to also
pass via Head Office, but I'm dubious as to whether this is the most
efficient method of achieving things for them
2] 'Constant' VPN access during working hours to allow file/document sharing
between sites
We've [thus far] told the customer that they've got the following basic
options:
1] Set-up the constant VPN connection between the offices either
server-server or router-router and configure all the Outlook clients at the
Remote Office as offline clients of the Head Office Exchange Server -
downside is that all the internal mails are sent to the Head Office then
back to the Remote Office which is pretty bandwidth inefficient.
2] Go SBS at the Remote Office - this will provide firewalling at the Remote
Office [at present its just the NAT on the Router!], internal mail at the
Remote Office stays within the Remote Office while external email can be
forwarded to a Smart Host of the client's Head Office Exchange Server and
incoming mail can be downloaded from the Head Office Exchange Server via
POP3 [or SMTP?]
Reasoning for SBS:
1] If the VPN link to Head Office goes down, the client in the Remote Office
still has internal mail and we could [if the outage were a long one]
configure them to send outgoing emails directly out via DNS. They'd get ISA
to protect their network [and adding a 2nd NIC] in order to provide FAR more
security than relying on the existing router's NAT. Basically to provide a
degree of fault-tolerance in addition to ease of remote administration and
increased security.
Reasoning for non-SBS [more from customer's perspective than ours]:
1] Cheaper - perhaps slightly tighter integration with their Head Office
existing set-up
Notes:
1] Client does NOT wish to go W2K3 at this stage - therefore it would need
to be SBS2K if we went down that route
Anyone got any pointers/advice/potential pitfalls?
Regards,
David Tag: imap access sbs2k Tag: 145848
Problem...
I have just noticed that any user can open any user's
Inbox, Calendar etc... from their Outlook client.
How do I lock it down just to that user - so that they can
access their Mailbox only and nobody else's?
This is urgent!
Skc Tag: imap access sbs2k Tag: 145841
Putting SBS 2003 Terminal Server in application mode?!
Hi,
Allthough Microsoft says application mode has been removed from SBS
2003 Terminal Services I read something on
http://www.bagsolutions.orcon.net.nz
Does this work, has anyone got experiences (or other solutions) with
putting SBS 2003 TS in application mode?
Thanks, Bas. Tag: imap access sbs2k Tag: 145840
RRAS and Internet
We have just deployed our replacement SBS2000 box.
I have a problem when I go to Start>Programs>Admin
Tools>Routing and Remote Access and Enable RRAS for VPN
users to clients through our server. When I enable the
service, I get pop-up warnings saying that DHCP will
assign IP addresses to any clients. Furthermore, as soon
as the RRAS service is enabled, a few clients are
experiencing problems browsing the web - as if the RRAS
blocks access to the web.
On clients that have this problem, the ISA firewall client
can update to the SBS, but cannot browse the web although
their browser is set to look at the Proxy server (ISA on
SBS).
Please can someone help me on this.
The SBS has two NICs - LAN and WAN. The LAN IP is
192.168.16.2 and the WAN IP address is 172.16.1.2 (as it
goes through a Firewall that NATs the IP). The WAN card
is hardcoded with the IP, even though the firewall runs
DHCP.
The SBS is fully patched via Windows Update and Service
Packed for SBS SP 1a.
skc Tag: imap access sbs2k Tag: 145832
SBS SSL Issues
Hello all,
I am trying to connect to a secure web site, that is using
a unnormal port address of 19638, I am using a SBS server
with ISA firewall, and I know that I need to add this port
to the exsisting range of ports that my server hold.
But
I have no idea how to do it, I have tried the SDK for SBS
and that does not help, tried all meta sites but still no
luck.
Can anybody help ?
Thanks
Mike Tag: imap access sbs2k Tag: 145831
Help! Help! Cannot add CALs: Message: Your Server is not running Microsoft Small Business Server
Hi,
Help needed urgently!
Our new SBS-2000 server is nearly installed and is going in "use" tomorrow.
Today, I wanted to add additional client access licenses.
I have a SBS-2000 client add pack for 20 clients. When I run setup.exe from
the diskette, I get the following error message:
"Your computer is not running Microsoft Small Business Server. You can only
add licenses to a computer running Microsoft Small Business Server"
But I definitevely have SBS-2000. I also detected another strange thing: For
some reasons I do not have the "Business Server Administration Console", it
simply does not exist on my server!!!. Reading some newsgroups articles, I
found out, that the console should be in the folder "C:\Program
Files\Microsoft BackOffice\Managment...." But also: I do not have a folder
named " C:\Program FilesMicrosoft BackOffice"!!
Reading the Knowledge Base article KB234929, I tried to apply the registry
patch to HKLM\Software\Microsoft\Small Business\Version. The key was empty,
so i changed it to Value = 5.0 (5.0 for SBS-2000). After that, I got
another error message when I tried to run setup.exe with the following text
"You can not add more licenses becaus this would place your computer over
the allowed maximum numbers of licences.
The I ran setup.exe -v from the diskette which displayed the following
infos:
Use count: 0x0000000
Concurrent Limit: 0x00014
Previous Limit: 0x0005
Current Limit: 0x000a
So, that's all I know for now.
What's going wrong with my installation of SBS-2000? Are there any tips that
could me? Any help is greatly appreciated ...
Thanks a lot in advance ...
Michael Schaefer Tag: imap access sbs2k Tag: 145827
Merv! Where art thou?
Merv, mate! You may remember me from such posts as last
week. I posted with subject of "Internet failed!" (this is
about 3 pages back). You had suggested looking at the
routing table which I have, and for your amusement have
posted.
If you can, I would appreciate any feedback you or anyone
else can give. This has got me stumped and I would hate to
lose this round. :)
Tippy. Tag: imap access sbs2k Tag: 145824
Publishing Outlook Web Access with ISA Server and Exchange on the same machine
Does anyone know of a way of manually configuring ISA to
publish outlook web access when the ISA server and
exchange server are the same machine ???
the ICW (internet connection wizard) for SBS crashes. so
we set up a destination set to include
www.lfe.org.au/exchange*, www.lfe.org.au/exchweb* and
www.lfe.org.au/public*
then set up a web publishing rule using this destination
set to point to the internal IP address of our ISA server
on port 81. our website (www.lfe.org.au) works doing this
but OWA doesn't ?? any ideas please ?
....thanks....
Sam Tag: imap access sbs2k Tag: 145822
configuring a report
Hi I have configured sbs system admin to email me a report
on the health of the system. It does this. Only problem is
that when I try to open the report in Outlook it can't
associate a program to read it.
Any help appreciated.
ps I tried both in raw mode as as well as XML Tag: imap access sbs2k Tag: 145814
ISA blocking access to web site
SBS2000 has been setup and things had been working great for almost 2 years
but we finally hit a snag. We are not able to get to the web site
wwwdotmydomain.com (not the real domain). When we setup the server we were
told that this office would host their own web site and email so we setup
the domain as mydomain.com with a Dell PowerEdge2500 with many bells and
whistles.
Well the owner 2 years later transfered his web site and email to be hosted
by his ISP. For email all I really had to do was configure Exchange with
POP3. When I try to hit the web site now from the LAN it asks me for a
Domain Username and Password. The LAN's domain is mydomain.com which may be
a problem with the ISP hosting mydomain.com
I can get to the web site using the IP Address, and I have modified the host
table on the server and get a reply back with the correct address when
trying to ping wwwdotmydomain.com but I can not get to wwwdotmydomain.com
without it asking me for a domain username and password. Any help would be
great, thank you. Tag: imap access sbs2k Tag: 145813
server errors
Hi, My server has the following errors:
Critical - 12/7/2003 10:08:28 AM - Server Memory Pool
Paged Failures > 5 Server Memory : Critical condition. WMI
Status: 2147749889
Critical - 12/7/2003 10:08:28 AM - Redirector Network
Errors/sec > 1 Redirector : Critical condition. WMI
Status: 2147749889
Critical - 12/7/2003 10:08:28 AM - Server Access Errors
Errors Granted Access > 10 Server Access Errors : Critical
condition. WMI Status: 2147749889
I have 2 gb of ram and dual zenon p2 2.6 gb processors.
Could someone please explain what the errors mean, and
what I should do.
Regards Simon Tag: imap access sbs2k Tag: 145808
SBS2k with 1 NIC and no ISA server
Am migrating an SBS install from one box to another. This new box is on a
network that has a 2Mg broadband feed supplied by an ISP that is firewalled
by them.
The broadband feed is presented to us as an ethernet cable with an IP that
is on the internal range of our network. I have asked they map a fixed
external IP to our new SBS2K box internal IP for email delivery, TS etc.
The question: with this set up I cannot see how I would use ISA server
(needs 2 NICS right?) and so am not going to install it. Instead I am going
to have DHCP give out the broadband ethernet IP as the default gateway. I
am pretty happy with the ISP's firewall technology (Nortel Shasta), but does
this set up pose problems I have not foreseen? Will DNS set-up from default
be fine or will it need work?
Anyone with any info, pointers about SBS2K with 1 nic would be most welcome.
thanks
Gerry Tag: imap access sbs2k Tag: 145781
Operation Failed
SBS2000 server with all patches and latest service packs. Workstations are
Windows 2000Pro running Outlook 2002 with latest service packs and patches.
A couple of the workstations intermitently experience problems opening
e-mail attachments. When the users try to open the attachment Outlook will
display the following error: "Operation Failed."
If they click Ok and try opening the attachment again, sometimes it will
open fine and sometimes they wait a few minutes and can open the attachment.
I'm stumped on this one. Any help or information would greatly appreciated. Tag: imap access sbs2k Tag: 145778
DotNetNuke on SBS
Bit OT, but I'm a gonna try here...
How many folk are running a dotnetnuke site on SBS???
One at least - I am - using it to put all the documentation for the
client online for them. I *really* like it.
At the moment, it's internal access only. In the near future, I want to
allow external access over SSL (we'll generate a certificate ourselves).
I also have a problem on the client install of my dotnetnuke site, it
seems to have gone all case sensitive on me (it's running fine on my own
PC). Are there any DotNetNuke NG's or good support sites I could check
out?
--
Duncan Tag: imap access sbs2k Tag: 145773
SBS2K => SBS3K - upgrade
OK, read a bit here about migrations n' stuff - but for many of us, with
smaller networks, it's not economic to migrate to a new server.
I have a client, for eg. with a one year old server (nice PC, will last
another couple of years I hope) - they don't wanna fork out another $20K
for another server (it's just not necessary). The current one is doing
the job nicely.
So it'll be an upgrade, or fresh install of SBS3K.
And yet!!! - I've read very little on this NG on *upgrading* experiences
that folk have had - surely many of you have done this. I'd like to
know of your experience, and what can go wrong.
Are folk waiting for SBS3K SP1 or something? :)
--
Duncan Tag: imap access sbs2k Tag: 145772
Understanding Exchange and the M Drive
What actually resides on the M drive and why should you not scan it or back
it up?
I want to make sure that the users have enough space for their mailboxes.
Thanks,
Chon Tag: imap access sbs2k Tag: 145771
migrating SBS2000 to a new server
Hi there,
I have a SBS2000 server that has outgrown its current hardware. Is there a
good how-to on migrating an existing Small Business Server 2000 to new
Hardware while preserving all the settings.....
TIA
TonyR Tag: imap access sbs2k Tag: 145770
OWA prompts for password multiple times
I have OWA installed and the article 327349 says to
unclear the check box for Ask Unauthentuicated users for
identification to fix this problem of prompting for
password. Will this open up the access to anyone?
Peter V Tag: imap access sbs2k Tag: 145766
name resolution query
I can connect from a remotecomputer to my sbs server and link to other
computers on the network by ip number but not by name - cannot ping by name
can anyone help
Regards
Richard Tag: imap access sbs2k Tag: 145765
what is the best way to secure imap access.
going to use ssl with OWA.
is there similiar for imap.