RPC, Group Policy, and DFS issues after SBS 2003 install
I just installed a brand new instance of small business server 2003. At the
moment, the DC is the only machine in the domain. I and am getting the
following group policy errors in the event log:
"Windows cannot access the file gpt.ini for GPO
cn={6AC1786C-016F-11D2-945F-00C04fB984F9},cn=policies,cn=system,DC=RisingSta
rphoto,DC=local. The file must be present at the location
<\\RisingStarphoto.local\sysvol\RisingStarphoto.local\Policies\{6AC1786C-016
F-11D2-945F-00C04fB984F9}\gpt.ini>. (Windows cannot find the network path.
Verify that the network path is correct and the destination computer is not
busy or turned off. If Windows still cannot find the network path, contact
your network administrator. ). Group Policy processing aborted.
For more information, see Help and Support Center at "
After further investigation, I realize that I can't create a DFS root or
create a DFS share. When creating a DFS root, I get the following error:
"The following error occurred while creating DFS root on server
risingdco1.risingstarphoto.local: RPC server is unavailable"
Both the "Remote Procedure Call" and "Remote Procedure Call Locator"
services are running.
If anybody has any suggestions, It would be greatly appreciated. I found a
KB article referencing the "group policy" error, but the fix required
changing registry entries that don't exist on this machine.
Thanks much.
David Tag: How to delete the hotfix backup Tag: 149817
Group Calendar
Hi all
Could somebody give me advice on how to set up a group
calendar on sbs 2000? I have tried to set one up on the
public folders but have failed miserably, maybe I'm tired
and need to go home now!!
any advice would be great for the morning!
thanks
Mark Tag: How to delete the hotfix backup Tag: 149810
Exchange wont flow
When we came in this morning it appears we have lost the ability to send and
receive internal or external email. All the Exchange services are working
properly and mailbox and public store are mounted. We can all get into our
mailboxes and read our existing messages but we can't send anything. It
appears to send (disappears from the outbox) but just goes into a black
hole. The same applied to internal or external mail inbound and outbound.
Very strange.
Ideas please??
--
Darwood MCSE
Remove nospamme from email address to reply. Tag: How to delete the hotfix backup Tag: 149807
MyDoom / Novarg
We have received 26 (cleaned by ISP) so far. What's everybody else on?
--
Darwood MCSE
Remove nospamme from email address to reply. Tag: How to delete the hotfix backup Tag: 149803
outlook q?
SBS 2k SP1
is there any way to get outlook 2002 without buying office 2002.
i mean ... few months ago i saw new outlook 2002 setup on SBS 2k SP1 cd
i was thinking to buy cal's for exchange 2003 and installation media but it
si not valid way
--
*tomislav domagoj perica*
*the national democratic institute for international affairs (NDI)
*http://www.ndi.org
*preradoviceva 22/4
*zagreb
*tel:
*+385 1 48 54 694
*+385 1 48 54 689
*fax:
*+385 1 48 54 686 Tag: How to delete the hotfix backup Tag: 149799
Fax Service and Dual Modems
Folks,
Hoping that someone can help to shorten the way.
Can one hook up two modems to SBS 2003 Shared Fax Services. The goal is one
line for inbound,
the other for outbound?
I do this with Fax Server apps (GFI Fax for Exchange) and Brooktrout boards,
but am wondering
is the same can be done in SBS 2003.
Would sure be great it if could be...
Also am looking for recommendations for cost fax servers that work with
exchange 2003 and SBS 2003.
Regards,
David R. Hibbeln Tag: How to delete the hotfix backup Tag: 149796
URGENT! Exchange not working
I have a "standard" SBS2000 network:
SBS2000 IBM server with:
- ISA (two nic)
- hardware firewall
- SMTP mail
- SQL installed but not in use
- All SPs installed
- all client computers Win2000
- 1 XP laptop workstation
- 1 AS400 mainframe
All workstations were using Netscape mail client to send / receive mail via
POP3
I started configuring Outlook 2000 on one computer and Outlook XP on
another.
Everything worked for a few days, and now POP3 client can't retreive mail
any more:
I get this error every time a user tries to get mail:
Tipo evento: Errore
Origine evento: POP3SVC
Categoria evento: Modulo contenuto
ID evento: 1023
Data: 27/01/2004
Ora: 16.11.40
Utente: N/D
Computer: SERVER
Descrizione:
Errore 0x8004050a durante il rendering del messaggio 0001-0000000a0415 per
il download per l'utente p.billaud@sedpa.mc.
Per ulteriori informazioni, fare clic su
http://www.microsoft.com/contentredirect.asp.
Dati:
0000: 50 04 14 00 P...
And Outlook clients keep "syncronizing" with Exchange server.
I have no idea on what to do.
I hope my description is clear enough and my english is good enough for you
to understand my situation.
Thanks,
Filippo Tag: How to delete the hotfix backup Tag: 149795
Out of resources when printing
Hi
We have this problem with one of our win2k workstations. When we try to
print from within a terminal services session on this workstation, the main
sbs2k server comes up with an out of resources error and it can not see the
printers anymore. We have to restart the main server every time this
happens.
Any idea what this can be?
Regards Tag: How to delete the hotfix backup Tag: 149791
Cannot use help and support on XP client
I know this is slightly off topic but not sure if anyone
else has had this problem.
When I log onto the XP client as a local administrator I
can use the help and support but if I log on as a domain
user as part of the domain the help and support just hangs
and I get Application hung errors in the event viewer.
Any ideas please
Thanks in advance.
Best Regards
Antony Tag: How to delete the hotfix backup Tag: 149789
Slightly off topic
I have a Dell Latitude latop with Windows XP SP1 pro.
I find that when I change static IP addresses (which is a lot from customer
to customer) it takes XP about 30 seconds to bind the IP to the NIC, in
which time the LAN settings dialog box appears to hang! After 30 seconds to
a minute its fine!
Anyone else have this problem? Anyone know the cure!
Regards
Austin Tag: How to delete the hotfix backup Tag: 149784
Terminal Services
I cant get into my Webspace this morning, and I didnt load TS before I left
on this Trip. Is there somewhere I can get TS to try and get to our Server?
Thanks,
Mike Behanna
Power Quality Systems Tag: How to delete the hotfix backup Tag: 149780
RRAS reinstall ??
Since I see that nobody can help me out with the RRAS problem I want to
reinstall the RRAS. Can anybody tell me how to do that plz?
Gus Tag: How to delete the hotfix backup Tag: 149779
Exchange won't let us send email from another domain that we own!
Exchange is configured for abc.com but we also own xyz.com.
If user goto the from field in outlook and try to send from info@xyz.com
they get an access denied message, any ideas.
Regards
Austin Tag: How to delete the hotfix backup Tag: 149775
Cannot view Company.com website via internal Lan! Kindly Help!!!
Hi All,
I have an SBS 2000 setup (2 nics, sonicwall firewall, aDSL connection,
TZO dynamic service) which so far has been running fine. One problem
though...for some reason, I cannot view our www.company.com website on
the sbs server or any of the workstations from inside the LAN. When I
type the www.company.com address, it brings me right to the SonicWall
Router Setup Page located at (192.168.1.1). I can view all other
websites no problem, just not my company's external website.
NOTE: if I view the www.company.com website from any other computer
outside the LAN (i.e. at home), it loads fine.
Any ideas for a fix? Has it something to do with TZO?
** Hugs & Kisses **
~ Cassie ~ Tag: How to delete the hotfix backup Tag: 149774
I am looking for FAX Services
Hi,
I am looking for a FAX Server and first preference is a Microsoft Product.
I learnt from the Microsoft site the SMB 2003 has a Fax Server, how well
does it integrate with the MS Exch 2003 because I want individual users to
send faxes from their mail boxes as well as receive Faxes to their mail
boxes.
Is this with in the scope of the Microsoft products.
Does Exch 2003 comes with any default Fax support.
Can someone also enlighten me how is the Fax Service in Win2003 Server
different to the Fax Server Service in SBS 2003.
Thanks in Advance....
Srini Tag: How to delete the hotfix backup Tag: 149772
More backup problems!
In the absence of our Sony tape device (currently at the doctors) I am
attempting to use a maxtor usb external hard drive.
Incremental backups (around 650Mb) are fine. As soon as I attempt a full
backup (around 22GB) I get a disk full message after 4.7 GB despite the fact
there is over 30Gb free space! Can't find anything on veritas site; all
answers say to free up space!!
Any thoughts anyone. Also I thought there used to be a veritas newsgroup
but I don't seem to be able to find it!
Chris Curtis Tag: How to delete the hotfix backup Tag: 149771
HELP !! Java Applets Again!!
Hi all
I am still unable to get java applets to run on any of
our machines. I have applied the update 305217 and
followed the steps on
http://www.smallbizserver.net/sbs2003/Some_Java_applicatio
ns_do_not_work_when_ISA_is_installed.aspx
I still get the red X up the top where the applet should
run. On the Sun site, it says that this is because it
cannot detetc the proxy settings so I have manually
changed these in the sun console.
Anybody, help me please!!!!
Mark Tag: How to delete the hotfix backup Tag: 149770
Imap Access
Hi there, Using SBS2k and need to use IMAP for MAC Clients within the local network. The MAC clients(os x) find the IMAP server but get an error Invalid account ID or Password. I then setup a PC client for IMAP using Outlook express and the same result. They both seem to find the IMAP server but come up with bad user names or passwords
Any help please...............
Regard
Paul Tag: How to delete the hotfix backup Tag: 149767
OWA certificate issue
Thanks to the well written tutorial on smallbizserver.net, I'm on the verge
of rolling out OWA. In my testing, I'm running into one issue that concerns
me though. When I type in the site address (123.456.789.1/exchange) The
certificate window pops up as expected. I click on the view certificate,
then on certification path (so I can install both certificates as described
in the tutorial) and the server IP is listed at the top with an exclamation
mark on it and the error "The issuer of this certificate was not able to be
found." Obviously since the it can't be found it can't be installed. I
thought maybe I put the certificate in an unreachable location on our
website, so I copied it to a location on another site I KNOW is accessible
and I get the same thing even after re-mapping the AIA line to the new
source. What could be going wrong with the certificates? I can get into OWA
just fine by clicking "Yes" on the do you want to proceed window, but I get
the warning everytime.
Any pointers?
Thanks everyone. Tag: How to delete the hotfix backup Tag: 149759
OWA for Selected Users
Is there a way to enable OWA (w/SSL) only for selected users on SBS2k? I
have a client requesting me this... and I have never even thought about it.
Any input will be greatly appreciated :-)
--
-Javier
<< SBS ROCKS !!! >> Tag: How to delete the hotfix backup Tag: 149753
DHCP stopped working. XP PRO SP1 clients.
Hey everyone,
Odd problem, looking for some guidance.
SBS2K SP4. DHCP server stopped working. Cannot get an IP address when I do
an ipconfig /renew. All clients are XP PRO SP1.
What is odd though is I'll restart an XP PC and then I'll get an IP address
at startup and it works.
But once I release it, I cannot get reassigned.
Some clients are wireless.
For clients with both wireless and a wired connection, at restart, the wired
connection get's an ip address, but the wired never get's an ip address. The
wireless stays at the 169.xx..xx format.
What should I look for?
Nothing in the event viewer indicating a problem.
I can manually assign addresses which work but assiging does not work.
I've restarted the server as well.
Thanks
John Tag: How to delete the hotfix backup Tag: 149751
Exchange taking lots of RAM issue - Interesting
At your own risk but the article is interesting enough. I know I am not
messing with the settings but might be useful for others....
Rick in the Midwest
How can I change the amount of memory that the Store can use in Microsoft
Exchange 2000 Server and later?
A. The Store is responsible for interfacing with the Exchange database
files. Because these files are disk based, the Exchange server caches as
much information as possible and the Store uses as much of the machine's
memory as possible, up to a default maximum of approximately 858MB of RAM.
The Store releases this memory when other processes need to use it. For
example, on a system with 1GB of RAM, you shouldn't be surprised if the
Store typically uses more than 700MB. Having hundreds of megabytes of free
memory serves no purpose, so the Store simply puts available memory to good
use.
You can change the amount of memory that Exchange uses for its cache by
carrying out the following steps (although you should fully test any such
change because it might affect system performance):
1. Install the Windows 2000 or later support tools from the server OS
installation CD-ROM.
2. Start the ADSI Edit utility, which is one of the support tools--go to
Start, Run, and type
adsiedit.msc
3. From the left-hand pane, expand the root and expand the Configuration
item.
4. Expand Services (each item will be prefixed by CN=), Microsoft Exchange,
the name of your Exchange organization, Administrative Groups, the name of
the administrative group, Servers, the name of the server for which you want
to modify the Store memory information.
5. Select the server. In the right-hand pane, you'll see a list of
components that you can change.
6. Right-click CN=InformationStore, then select Properties from the context
menu.
7. Select the Attribute Editor and ensure that the "Show optional
attributes" option is selected.
8. Double-click "msExchESEParamCacheSizeMax."
9. Although the value appears blank, Exchange sets this value to default to
219726. The value refers to the number of 4KB sections, otherwise known as
pages. The system uses 4KB increments because the Extensible Storage Engine
(ESE) database that Exchange uses stores data in 4KB sections. Enter a new
value equal to the number of 4KB sections required. For example, to limit
the Store to use 50MB of RAM, you'd enter a value of 12500 (you would never
set the value this low on a production server--I'm just using it here as an
example). Because of virtual address space limitations, Microsoft recommends
that you enter a maximum value no larger than 307200, which is approximately
1.2GB of memory. You should typically increase the default value of
219726 only if you have more than 2GB of memory. For maximum efficiency,
ensure that the value you enter is a multiple of 8192 (i.e., 2 pages). Click
OK.
10. Click OK to close the InformationStore Properties dialog box, then close
the ADSI Edit console window.
11. Before the change can take effect, the value for the setting you entered
in Step 9 needs to replicate across the forest. After the change has
replicated, you need to restart the Store on the targeted Exchange server
for the change to take effect. Tag: How to delete the hotfix backup Tag: 149750
SBS2000 slowing down
My users are having problems accessing documents from my
SBS2000 Server. Takes forever to retrieve a simple text
doc from one of the folders. The hard drives are
constantly working, even though no one is using the
system. I'm new at SBS. Help!
Thanks in Advance!
- Louis Tag: How to delete the hotfix backup Tag: 149744
client configuration
I had a laptop with W2k-pro and previuosly connected to the internet with a cable modem. I set up another pc with SBS 2000. I can get to the internet with the server and with laptop attached to my network but when I go back to my original configuration with the laptop, I can't get to the internet. I used DHCP with the cable modem and I double checked the IP settings. I used IPCONFIG /release and /renew and even rebooted. I can ping my router, the cable modem and my ISP DNS servers. I just can't get to the internet. I can't find any information on this. Is this a security issue? Thanks, John Tag: How to delete the hotfix backup Tag: 149743
Outlook oddity - refuses to send mail to one domain
Maybe a red herring, but... Outlook 2000 on my personal machine (dial up,
SMTP/POP3, Corp mode) has suddenly started refusing to send mail to one
domain (that I've been communicating with for years).
No matter what recipient, it just stays in the outbox. Have rebooted etc.
Also have NIS2002 on this box. Tag: How to delete the hotfix backup Tag: 149740
Exchange taking 720MB RAM
Noticed that one of my SBS2K that has 35 users on it the store.exe process is taking 720MB of RAM (out of 1GB). This seems like alot....Is this normal for exchange to use this amount for so few users? Any idea on why it's taking so much
Thx. Tag: How to delete the hotfix backup Tag: 149728
<<<Just a warning.....Block those Zip, exe, pif and scr files >>>
New Worm Activity - W32.Novarg.A@mm
Symantec and other anti-virus vendors are reporting a new mass-mailing
worm called W32.Novarg.A@mm. Initial reports indicate the worm spreads
through .exe, .pif, .scr, and .zip attachments. Preliminary reports
indicate the worm listens on TCP port 3127. More information will be
posted when it becomes available.
Since about 2 p.m. my pacbell account is getting some zip files [besides
the normal SWENs that it gets regularly] I think they are Novarg. all
about 33 KB in size.
--
--
http://www.sbslinks.com/really.htm Tag: How to delete the hotfix backup Tag: 149725
XP from Workgroup to Domain in SBS 2000
When I setup all my XP Pro machines, I set them up using
the workgroup instead of the domain and it works fine.
Now, I am wanting to get the Wim 98/ME login screen to
appear in Win XP Pro
Name:
Password:
Domain:
I was told I need to change them from a Workgroup to a
Domain. I tried this through the Computer Name tab and
when I switch to Domain and try and change it, it
says "Access Denied" Tag: How to delete the hotfix backup Tag: 149723
OWA and one user
I am having a problem with one user trying to login to
his OWA account. Three times for the password than
Http / 1.1 401 Unauthorized.... Any suggestions to
troubleshoot? Every other user works fine.
Peter Tag: How to delete the hotfix backup Tag: 149721
Address Book via OWA
Is it normal not have the address book show up
automatically when creating a new message via OWA and
clicking on the To: button. It makes you search for the
user by typing a "K" than you have to hit the Find
button. Is this nornmal or how could I have the address
book come up automatically when someon creates an email
from OWA? Thanks.
Peter V Tag: How to delete the hotfix backup Tag: 149720
cant send internet email
Users can receive mail but cannot send email to external addresses. They can
send to everyone internally. When clicking "send and receive" from an
outlook client an error is returned that says "the tcp/ip connection was
unexpectedly terminated" .
This started to occur after a linksys router was reset to factory defaults.
After being reset the router came back online with an address that conficted
with the SBS server. (192.168.1.1) SBS displayed a message about a
conflicting ipaddress and the router was taken back offline and set to its
previous address. (192.168.1.5) Then everything was working except external
email.
Any ideas ?
thanks ! Tag: How to delete the hotfix backup Tag: 149718
DNS Server Configuration
This is a multi-part message in MIME format.
------=_NextPart_000_000F_01C3E41F.9FD52150
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I would like some adivce on how to configure the DNS Server.=20
What should be the "Forwarding Address" in the DNS server on the SBS =
2000 server if the ISP provides dynamic IP addresses only?
So far this has been a problem, as the server and all workstations are =
hooked up to the router, which translates to whatever the new WAN and =
ISP DNS server address happens to be. As of right now, I have the =
forwarding address pointing to the router.
There is only one SBS 2000 server so far, ISA is not used.
Below is what I have configured so far.
1. DNS is configured per the following=20
- Gateway (IP address of office router)
- DNS Servers (IP address of local SBS 2000 DNS server)
- Primary DNS points to itself.
- Secondary DNS points to itself
- DNS domain name ( domain-name.com)
- WINS Servers (IP address of local SBS 2000 WINS server)
- Primary WINS points to local WINS server.
- NBT node type (0x8)
- Hosts and LMHOSTS files are not used.
- Enable NetBios over TCP/IP is checked=20
Thanks very much.
Attila
------=_NextPart_000_000F_01C3E41F.9FD52150
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1276" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial size=3D2>I would like some adivce on how to =
configure the=20
DNS Server. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>What should be the <STRONG>"Forwarding =
Address"=20
</STRONG>in the DNS server on the SBS 2000 server if the ISP provides =
dynamic IP=20
addresses only?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>So far this has been a problem, as the =
server and=20
all workstations are hooked up to the router, which translates to =
whatever the=20
new WAN and ISP DNS server address happens to be. As of right now, =
I have=20
the forwarding address pointing to the router.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>T</FONT><FONT face=3DArial =
size=3D2>here is only one=20
SBS 2000 server so far, ISA is not used.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Below is what I have configured so=20
far.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial =
size=3D2><STRONG>1. DNS is=20
configured per the following </STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2>- Gateway (IP address of =
office=20
router)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>- DNS Servers (IP address =
of local SBS=20
2000 DNS server)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> =
- =20
Primary DNS points to itself.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> =
- =20
Secondary DNS points to itself</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>- DNS domain name (=20
domain-name.com)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>- WINS Servers (IP address =
of local SBS=20
2000 WINS server)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> =
- =20
Primary WINS points to local WINS server.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>- NBT node type =
(0x8)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>- Hosts and LMHOSTS files =
are not=20
used.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>- Enable NetBios over =
TCP/IP is checked=20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV><FONT face=3DArial>
<DIV><BR></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Thanks very much.</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Attila</FONT></FONT></DIV></BODY></HTML>
------=_NextPart_000_000F_01C3E41F.9FD52150-- Tag: How to delete the hotfix backup Tag: 149717
OWA & opened email not appearing in InBox
Using SBS 2000. One user cannot see any opened items in
his InBox from OWA. Un-opened items appear but once he
opens them they cannot be seen from OWA. The opened
items do appear in his InBox with the full Outlook
client...All other folders within OWA show opened items.
Other users are not experiencing this problem.
Any ideas??
Thx! Tag: How to delete the hotfix backup Tag: 149714
Creating a BDC on an SBS network
A couple of questions:
How do I create a BDC of an exisiting SBS 2000 PDC on a
new machine, fresh drive?
Can I install MS Exchange on the sam drive as well as
other Back Office features?
Thanks,
Paul Seaton, IS Mgr. Head Start Tag: How to delete the hotfix backup Tag: 149712
can't retrieve POP3 email
Hi
We have on person in our company who works from home.
They retrieve their email via POP3. Everything will be
fine and then for some reason, they stop receiving email.
If they close down outlook and reopen it, it still won't
work. They have to log onto OWA, view/delete an item and
then their POP3 account starts to work again. I have no
idea what could be the cause. It's as if one of the
emails blocks/clogs the process so no new emails can
download. Once this email is gone, the process starts to
work again. The rest of the people in the office use SMTP
and don't experience this. I'm not sure if it is the
client PC or the Exchange server or how to even trouble
shoot this problem.
Does anyone have any ideas? Tag: How to delete the hotfix backup Tag: 149704
connecting 98me to sbs2003?
Is there a separate news group for 2003?
Does anyone know how to setup 98se clients on sbs2003 as the setup disks are
not used any more
thanks,
Finn
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.566 / Virus Database: 357 - Release Date: 22/01/2004 Tag: How to delete the hotfix backup Tag: 149703
Explorer - Can't view server Drive D
Weird problem. Using windows explorer (my computer or similar), I can see
my C and D drive, get their properties, etc. I can click on the C drive and
see all folders OK. If I do the same on the D drive, the folder tree
expands, then hangs with the egg timer, then shuts down the explorer window
dumping me at the desktop.
I cannot get to the files on the Drive D, except those that have shares and
those can only be accessed from other PCs using the nework. This is messing
up backups, causing A/V software to crash, etc.
Server is SBS2K fully patched. I've disabled A/V software, tried running in
Safe Mode, problem repeats. I don't have any RAID systems - drive is only
18GB SCSI formated NTFS.
I cant see anything in the MS KBs.
Anyone any ideas? Tag: How to delete the hotfix backup Tag: 149700
User folder issue / Viewing graphics in a TS session
Question 1: Within each individual users folder that is
created on the SBS 2000, there is a folder
called "windows" and a file called "wind but am not sure
what they are for ? If they are important Can I secure
them from being deleted by a user ? Hide them ?
Question 2: I cannot block internet access to a
basic user, even though I have removed them from the BOIU
group. Not sure why ?
Question 3: Is there any way of increasing the screen
resolution for a TS session because any jpegs, PDF's
containing graphics or excel spreadsheets containing
jpegs, that I try and view thru a TS session look
absolutely rubbish. Can I do anything about this or would
I have to install Excel on a workstation and view the
spreadsheets in question as a fat client ?
Best Regards
Antony Tag: How to delete the hotfix backup Tag: 149698
SBS2000 & AOL email addresses
Right new problem for you guys, I know it's a bit similar
to some earlier ones but I still need some help.
First the system layout.
SBS2000 and a number of PCs on a network. Internet access
is through a 3com ISDN Lan modem, on which I have put the
ISP DNS entries, that is connected to the rest of the
network through a hardware firewall.
Internet access via our ISP, BT, and mail hosted
elsewhere, bit odd but thats the way things have grown up.
Internet and email all seem to work well, POP3 and SMTP
connectors all doing their jobs well,
except,
Sometimes we get rejected emails when sending to some
external contacts that have AOL accounts. Sometimes they
get through but mostly they get rejected.
Now I have read the earlier posts about PTR records and am
wondering whether I need to set one up but where at the
ISP or where our mail is hosted.
Any thoughts or help gratefully received. Tag: How to delete the hotfix backup Tag: 149697
OWA enabling
Users can connect to email through OWA from internal LAN. What should I
configure to let them connect to email trouh OWA from outside?
Gus Tag: How to delete the hotfix backup Tag: 149692
SBS roles
I have SBS 2000 and one W2K standalone server. Is it
possible to transfer Exchange or SQL to that standalone
server or those products should only be installed on SBS
machine?
Regards, Iztok Tag: How to delete the hotfix backup Tag: 149691
Server Status Reports
Does anybody have a way to view the server status reports such as the .xml
file it creates?
Buddy Tag: How to delete the hotfix backup Tag: 149690
Allowing Java Applets
Hi all
I am trying to access a web site that uses Java but it
appears to be getting blocked by the ISA firewall. I
have downloaded the Java Runtime Environment from Sun and
installed it but when accessing the site, I get prompted
for a username and password by my ISA server firewall.
If I enter the admin password , it lets me pass but I am
still unable to view the content of the site.
Do I have to open up or allow something on the firewall?
any help is greatly appreciated
Mark Tag: How to delete the hotfix backup Tag: 149689
VPN Problem
This is a repost of a question earlier but with a different issue.
The server at the remote office (Windows 2000) can connect to our SBS2K
server without any problems.
To view the SBS network I have to disable the internal NIC. Is there anyway
of being able to keep the internal NIC alive and having the ability of the
clients behind the remote office's server being able to see the SBS network
as well.
Any Help would be much appreciated.
Thanks in advance
Andy C Tag: How to delete the hotfix backup Tag: 149687
SBS2003 Installations errors
When I connect a client to my server 2003, the first time, user applications
are supposed to be installed, like Explorer 6.0, XP SPK1, FAX Client, Shadow
Client,... but nothing happens. The Sript batch file in the login Script is
running but nothing happens. I tried Differnt Clients with different OS, but
it does not install.
Also, during SBS2003 Installation, I ket getting the error:
An error occurred while installing windows sharepoint and creating your
intranet site.
I tried insstalling the SBS2003 on differnet servers, with same error. ???
Help ????
ibezint@yahoo.com Tag: How to delete the hotfix backup Tag: 149686
SBS2000 Licensing Problem
Hi All,
I have a small business server 2000 setup with 25 Cals installed.
The last few days I have been constantly having a dialog box appear on the
desktop saying
"Warning: Licence usage for a product licenced in per seat mode is at the
maximum number of licences purchased.
New licence requests may not be granted. etc....."
When I look in the event log it's for the exchange 2000 product, I don't
even have 25 users connecting at any one time, and never had, yet this has
been popping up constantly for the last week, anyone got any ideas ?
Thanks. Tag: How to delete the hotfix backup Tag: 149683
Windows Management Instrumentation
During the day the speed of the network slows down
considerably. After looking through all the process in
the Task Manager I found that the WinMngt.exe had 99% of
the cpu.
So in the services I stopped the Windows Management
Instrumentation service. The network speed has increased.
Problem is that this service starts up again. I am not
sure if I can disable or change the service to manual.
Can anyone help?
thanks,
Jason
P.S. Does this also affect the Exchange server as when the
network slows down the users cannot access Outlook. Tag: How to delete the hotfix backup Tag: 149681
Outlook rules
Hi,
Auser wants to have her email forwarded to her Blackberry mobile, which
works great, a rule set up in outlook, stored on the W2KSBS. SHe does not
want to recieve attachments, but wants to see the body of the message. Can
this be done. I can only see a rule that does not send emails with
attachments. Using Outlook 2000 on a WIN2K client with a Win2k SBS box.
Thanks, Denis Tag: How to delete the hotfix backup Tag: 149678
sbs2k - remote desktop wont work
Hello!
I can not connect anymore to my SBS2K server by remote desktop. Please
advise me what configuration I need to inspect?
Gus Tag: How to delete the hotfix backup Tag: 149673
Hi all,
Any utility can delete the hotfix backup
fils "$ntuninstall...$", it's take to many space from HD