Problem receiving mail (2 NIC, router, dynamic IP)
I have an SBS client who is having huge problems receiving mail. Many
messages aren't getting through to them. A typical NDR at the sender would
be:
<conversation with mail.company.com [123.123.100.101] timed out while
sending end of data -- message may be sent more than once>
The environment is: SBS 2000 with SP1, ADSL internet connection using 2nd
NIC and router, dynamic IP address and using a dynamic DNS provider to
resolve the server's Exchange address.
We're getting a little desparate - we suspect that hundreds of messages are
getting lost.
Suggestions, please? Tag: Pop3 connector error Tag: 132903
licences move/reinstall
Hi,
Does anyone know the right procedure to reinstall=20
(reformat) the server without loosing the licences?
In other words: =BFhow shoud I "backup/move" the licences=20
and restore them later in another fresh install?
regards. Tag: Pop3 connector error Tag: 132902
No Server Access via Dial-up Modem
One of our clients has a 2x NIC SBS2k setup with a fixed IP on their WAN,
most of the staff use VPN fine and as administrators we use TS to administer
the server, all fine. The box is fully patched. As a backup there is a 56K
modem which we used to use to dial into the server if the 'net was down.
We don't know what we've done (or haven't done) but now the server answers
our dial-up call OK but the negotiation never finishes and the line is
dropped. The event log reports H. 323 Gatekeeper errors of 28 and 47 -
researched these but not much I understand! (Not even sure they're
relevant.)
Any pointers appreciated, TIA.
Regards
Norm Hughes Tag: Pop3 connector error Tag: 132898
TS - Run App on Logon not always working
Firstly, sorry for posting a blank page .. too quick with the trigger
finger.
Have a network with a SBS 2000 Server and Windows 2000 (member) TS.
The Environment settings for the User when logging on are set to run the
same application (accounting package). When the close the App the session
closes. No VPN only network logons.
All has been working fine up until a week ago where some users are actually
getting the desktop and the App is not running at Logon. Open another
session and it works fine.
The users that appear to be having the problem are running the RDP Client
and not the TS Client (but not all RDP Clients are experiencing the
problem).
Has anyone encountered something similar ... Technet and Google have proved
fruitless so far.
Andrew
Country NSW Tag: Pop3 connector error Tag: 132897
mcafee groupshield & netshield - update
Hi.
My sbs2000 connects to the net via adsl, using ppp over ethernet protocol.
Since two weeks ago, I was using a modem and raspppoe to connect, but, as
you suggested, we decided to buy a router and remove pppoe -----"for obvious
security reasons"----
ok, installed the router on the second nic, ran ICW, and everything was
re-configured in few minutes and worked fine
but....
but, starting that day, the antivirus solution installed on the server,
mcafee groupshield and netshield, doesn't auto-update anymore.....
I tried configuring the Av to use or not use the proxy server, but the
result didn't change......
From the server I can surf the web, and even go, using explorer, to
ftp.nai.com where the updates are resident......but the av says "can't
connect to update server".....
Can you help me please???
Forgetting: all the clients are able to autoupdate their mcafee
virusscan....
thanks
bye Tag: Pop3 connector error Tag: 132894
User Name comment
Does anyone know where the comment that appears next to a
users PC in windows explorer such as user name is found on
a windows 2000 operating system.
Phil Tag: Pop3 connector error Tag: 132893
please help me
I was wondering if anyone can shine some light on this
particular error message. I am not able to find much on
this subject beyond the description of what NetDDE is.
I started receiving this error message and at the same
time I am not able to access one of the servers on our
network. I am able to ping and connect to the server by
using the ip address, but I can't do it via it's name.
I know it is not a WINS problem and all of my network
settings are correct.
Source: NetDDE
Event ID: 206
Description: Listen failed: 15
this error message appears in the eventvwr every 30
minutes.
----------------------------------------------------------------------------
----
. Tag: Pop3 connector error Tag: 132890
slow client log on
I have 2 xp clients that are taking extremely long (1-3
minutes) to load the user profile (2Mb)
I have set the user to local profile but this has not
helped.
I have another site that is using normal W2k server and
have no problems
- there are no error logs
Any Ideas
Regards Tag: Pop3 connector error Tag: 132886
<< SBS news of the week September 28, 2003>>
news://msnews.microsoft.com:119/uMk77GChDHA.452@TK2MSFTNGP12.phx.gbl
Kevin's song of the week
http://www.microsoft.com/sbserver/
10 days 8 hours 54 minutes and 44 seconds to go before SBS2003 launches
SBS is going to the Big Easy and the Worldwide Partner Conference to
make it's debut...
http://www.microsoft.com/partner/events/wwpartnerconference/registration.htm
SBS specific events....
http://www.microsoft.com/partner/events/wwpartnerconference/sessions_sbs.htm
So what can you do in the meantime?
Well get cracking on getting information out to your contacts and
clients. Look over your fleets of SBS 4.5's and gently start informing
your clients that the timeclock is ticking on that platform.
SBS community efforts and information
news://msnews.microsoft.com:119/uZdLhXMhDHA.1872@TK2MSFTNGP10.phx.gbl
Read Harry's newsletter for more info on events...
http://www.nethealthmon.com/Issue2-10.htm
----------------------
When I was getting ready to roll out SBS2000 in my office, I went to the
Hands On Lab in LA.
http://www.msusapartnerreadiness.com/sbs2003.asp
SBS 2003 Hands On Labs UPDATE!
There is an update to share with you on the forthcoming USA SBS 2003
hands on lab tour commencing in late September. I treat it as a high
honor that I?ve been invited to assist in the delivery of the hands on
labs in several cities. You will recall from the last newsletter that
two sessions during the day together are offered. The morning session is
introductory in nature for the new SBSer. The afternoon session is more
intermediate/advanced and designed to show the differences from SBS 2000
-> to -> SBS 2003 (delta changes). You can sign up for either session or
both at http://www.msusapartnerreadiness.com/sbs2003.asp.
The entire SBS hands-on lab schedule is:
9/29/2003 Dallas TX (delivered by Brelsford)
9/29/2003 St. Louis MO
10/1/2003 Irvine CA (delivered by Brelsford)
10/1/2003 Arlington VA
10/6/2003 Miami FL (delivered by Brelsford)
10/6/2003 Minneapolis MN
10/13/2003 New York (East Elmhurst) NY (delivered by Brelsford)
10/13/2003 Detroit MI
10/15/2003 South San Francisco (Burlingame) CA (delivered by Brelsford)
10/15/2003 Portland OR
10/20/2003 Los Angeles CA (delivered by Brelsford)
10/20/2003 Indianapolis IN
10/22/2003 Chicago (Arlington Heights) IL (delivered by Brelsford)
10/22/2003 Morristown NJ
10/27/2003 Phoenix AZ (delivered by Brelsford)
10/27/2003 Atlanta GA
10/29/2003 Houston TX (delivered by Brelsford)
10/29/2003 Orlando FL
11/3/2003 Columbus OH (delivered by Brelsford)
11/3/2003 Charlotte NC
11/5/2003 Danvers MA (delivered by Brelsford)
11/5/2003 Denver CO
11/10/2003 Bellevue WA (delivered by Brelsford)
11/10/2003 San Diego CA
BEST PRACTICE: Seating is truly limited to 75 participants in each city,
so don?t delay in signing up for the SBS hands-on lab near you
-----------------
Can't go to a course? No excuse
Hands on lab online!
http://microsoft.granitepillar.com/partners/
---------------------
SBS 2003 RTM Standard is on MSDN. If you have a subscription it's
available for download!
--------------------
SUPPORT THE SBS COMMUNITY BY SHOWING SUPPORT FOR THE BETA EXAM
FREE beta exam can be taken until 10/5
news://msnews.microsoft.com:119/OhU#GAjgDHA.1668@TK2MSFTNGP12.phx.gbl
Go through those Hands on labs online and it may help out on the beta
...and give feedback!!
Please use the following promotional code when registering for the exam:
DNSSMB
-----------------------
- - - - - - - - - -
Sobig linked to DDoS attacks on anti-spam sites
A senior anti-spam activist is calling on law
enforcement authorities to track down the
perpetrators behind a widespread and sustained
attack on anti-spam sites. The call, from Steve
Linford of Spamhaus, comes along with fresh
evidence that the assaults have been enabled
bythe infamous Sobig worm.
http://www.theregister.co.uk/content/56/33059.html
- - - - - - - - - -
California spam law may face court challenge
When California Gov. Gray Davis signed one of the
nation's most sweeping antispam laws this week,
he didn't end a debate over how the proposal would
affect businesses in the richest, most technology-
savvy U.S. state. Davis merely shifted it from the
Sacramento statehouse--the scene of tense negotiations
among antispam activists, direct marketers and
technology companies--into the court system.
http://zdnet.com.com/2100-1104_2-5082049.html
http://www.usatoday.com/tech/news/2003-09-24-spam_x.htm
Legislators Take Shots at Spam
http://www.wired.com/news/politics/0,1283,60589,00.html
- - - - - - - - - -
Author of report critical of Microsoft loses job
The chief technology officer for a technology firm
that works closely with Microsoft Corp. lost his job
after he helped write a study critical of the insecurity
of Microsoft software. Daniel E. Geer Jr., an expert
with nearly three decades studying technology and
computer security, learned Thursday he was no
longer employed by AtStake Inc. of Cambridge, Mass.
http://www.siliconvalley.com/mld/siliconvalley/news/editorial/6860311.htm
http://www.securityfocus.com/news/7069
OS monopoly poses security risk, report claims
http://www.computerweekly.com/articles/article.asp?liArticleID=125151
http://techupdate.zdnet.com/techupdate/filters/specialreport/0,14622,6025221,00.html
http://money.cnn.com/2003/09/25/technology/microsoft_usa.reut/index.htm
Punters blamed for Windows security peril
http://www.macworld.co.uk/news/main_news.cfm?NewsID=6953
Want PC Security? Diversify
http://www.wired.com/news/infostructure/0,1377,60579,00.html
http://www.eweek.com/article2/0,4149,1276333,00.asp
Bust PC builder lands ICM with huge piracy bill
http://www.theregister.co.uk/content/51/33041.html
My personal take... I can barely keep up with patching one OS. If I
would "diversify" there would be no way I could keep up with all of them
AND be productive.
- - - - - - - - - -
Protecting company data from ex-employees
While companies are relatively accustomed to
requesting the return of building keys and ID cards
from departing employees, they are less vigilant
when it comes to electronic data. Can this lead
to problems? Yes! When employees are terminated
involuntarily, emotions can run high on both
sides of the table.
http://www.usatoday.com/tech/columnist/ericjsinrod/2003-09-25-sinrod_x.htm
- - - - - - - - - -
Californian anti-spam bill charges $1000 per email
A new Californian law targeting spam will be the
toughest in the US, with spam campaigns liable for
penalties of up to $1m. California Governor Gray
Davis said on Tuesday he would sign into law the
toughest measure in the United States to crack
down on "spam,'' the unsolicited email this is
increasingly clogging electronic mail boxes.
http://news.zdnet.co.uk/internet/security/0,39020375,39116626,00.htm
http://computerworld.com/softwaretopics/software/groupware/story/0,10801,85308,00.html
http://www.washingtonpost.com/wp-dyn/articles/A56503-2003Sep24.html
http://www.msnbc.com/news/971143.asp
http://www.cnn.com/2003/TECH/internet/09/24/california.spam.ap/index.html
http://www.wired.com/news/business/0,1367,60570,00.html
http://www.modbee.com/local/story/7491276p-8406812c.html
http://www.newsfactor.com/perl/story/22361.html
http://www.usatoday.com/tech/news/techpolicy/2003-09-24-calif-spam-law_x.htm
- - - - - - - - - -
Report: Lenders miss most ID theft
ID theft has grown so far, so fast, because financial
institutions and other lenders have missed it. A massive
study of 200 million new credit card, checking account
and cell phone accounts opened during 2001 ? with
participants like Citibank, Dell, Bank of America,
and T-mobile ? shows that 7 out of 8 identity thefts
are mis-categorized as simple credit losses by lenders.
http://www.msnbc.com/news/970182.asp
U.S. Senate committee clears credit data-sharing bill
http://www.usatoday.com/tech/news/techpolicy/2003-09-23-senate-id-theft-bill_x.htm
Credit checkers launch ID fraud watch services
http://www.theregister.co.uk/content/55/32962.html
- - - - - - - - - -
New era of malware requires new virus prevention solutions
Victims of the Lovsan/Blaster virus outbreak already
know that simply installing an anti-virus application
is no longer enough to protect against increasingly
complex virus hybrids designed to wreak havoc on
workstations and servers across the globe.?Today's
virus writers are more than script kiddies looking
to make a name for themselves with a piece of Visual
Basic code,? says Ryan Price, CEO of Y3K Group,
South African provider of content security solutions.
?They now create hybrid worms that use a variety
of mechanisms to replicate, combining excellent
programming skills with innovative hacker
techniques to cause mayhem.?
http://www.itweb.co.za/sections/techforum/2003/0309230742.asp
See you on the wires
--
"Don't lose sight of security. Security is a state of being,
not a state of budget. He with the most firewalls still does
not win. Put down that honeypot and keep up to date on your patches.
Demand better security from vendors and hold them responsible.
Use what you have, and make sure you know how to use it properly
and effectively."
~Rain Forest Puppy
http://www.wiretrip.net/rfp/txt/evolution.txt Tag: Pop3 connector error Tag: 132884
mail
Hi
i am running sbs 2000 with a dial up connection to the
internet.
Up until recently, my server would dial up and download
mail and on each workstation in microsoft outlook, mail
would be in the inbox. I could see it without having to
hit the send/receive button in ms outlook.
Now, my server will still dial up and download mail but on
each workstation in microsoft outlook, you have to hit the
send/receive button to get mail.
How can i change this back so that mail goes into the
mailbox automatically again without having to hit the
send/receive button in ms outlook?
I do not understand what has changed as i have not changed
anything.
thanks Tag: Pop3 connector error Tag: 132883
SBS 2000 and MDAC
I have an SBS 2000 with SP 4 installation on a Dell Power Edge 1400 SC. I
would like to know if I can apply an MDAC update ( such as 2.7 or 2.8) with
out it hurting Exchange. I currently have 2.5 sp3.
Jon Tag: Pop3 connector error Tag: 132876
Error 1720 - SB Server 2000 SP1 install.
I keep getting an error pop up dialog (Error 1720, unable
to run script) when I attempt to install the SP1 patch for
Small Business Server 2000.
I have already installed Windows 2000 sp4 and Exchange
Server SP3. Any suggestions what I can do to run the SP1?
Thanks....a lot if you can help.....
Elton Tag: Pop3 connector error Tag: 132858
VPN Ok. Internet Dead.
I have setup and configured a VPN to an offsite server
which works fine. However, when I connect the VPN, I lose
internet access. (Am running SBS2000 here). I saw a post
a while back about a setting to change to allow internet
access while connected to the VPN but I can't find it
again. As I recall, it was very simple (couple of clicks)
but damned if I can remember what it was!
Thanks!
Scott Tag: Pop3 connector error Tag: 132856
unlock software....free
I've posted unlocking software in the New Downloads section of
www.mcse2000.com that has a TON of controller drivers so as to access almost
every system. There are also about 2 dozen other free admin tools and
references (how-to's to save your butt) that come in handy. MCSE2000.com is
a free site for support and tools, pass it on.....
--
Sincerely,
Mark Mancini, CCA, CCNA, Master CIW&CI, CNE 4&5, MCSE+I 4&2000
www.MCSE2000.com
www.AppLauncher.com Tag: Pop3 connector error Tag: 132847
Domain Name
Hi,
This is probably a stupid question. However, I will ask it anyway.
I have run the SBS wizards to configure AD and Exchange with a domain name
of "mydomain.local".
The mail works fine. But when I checked one of the email addresses, it has
the mydomain.local suffix. E.g. jo.bloggs@mydomain.local
Where in Exchange do I configure the mail to use the internet registered
domain name? For example, microsoft.co.uk suffix? (Other than on the
exchange email addresses tab for each user account). Or is that it?
Many thanks,
Mark Tag: Pop3 connector error Tag: 132836
Security Services applying policy every 5 mins
I'm getting messages stating that the Group Security Policy has been
successfully applied - every 5 mins. Is this correct? Tag: Pop3 connector error Tag: 132834
Setting an AWAY message
Hi everyone,
Can someone tell me if it is possible or not to set an 'Away' message for a
user in SBS2000/Exchange2000 ?
I've looked and looked and I can't see it staring obviously at me in the
face!
Many thanks,
--
Grant Ovenden
Technology Artisan
Metro Technology (NZ) Limited | Focus.Innovation.Results Tag: Pop3 connector error Tag: 132833
modem keeps dialing and will not disconnect
Hi
My modem keeps dialing every 15 minutes and i do not know
what is causing it.
My modem will not disconnect either. i have to manually
disconnect it.
i have sbs 2000 with a dial up connection to the internet
and one network card.
my mail is checked every 4 hours.
Trend micro is checked in the early morning hours.
I have checked the workstations and they do not appear to
have any thing installed which would trigger it off.
Please help someone.
This is getting all too hard Tag: Pop3 connector error Tag: 132831
Health Monitor Alert-Critical Error
I just installed my SBS 2000 and looked at my Health
Monitor and I am getting a Critical Error from my NIC Card
with a Threshold Byte Total/Sec>500,000.
Anyone know what that means?
Does this error happen because I don't have any
workstations attached to the Server?
Thanks
Greg Pataky Tag: Pop3 connector error Tag: 132823
Timestamp +2 hours when sending through FTP
Hi all,
I have a problem I could not find an answer to on Google and this ng. Our
server has the correct time and timezone. Files created locally (either on
the server or on the server drive by a connected client PC) have the correct
timestamp.
However, all files sent through FTP have a +2 hours time skew; i.e. when I
send a file now, the timestamp is now + 2 hours. Needles to say, this
creates all kinds of interesting problems I could happily live without.
FTP is on IIS, FTP with server publishing rule and ISA. Server is SBS2000
with all recent servicepacks installed.
I am sure this has something to do with GMT (we're in the GMT+2 timezone),
but I cannot grasp HOW exactly.
Help?
Rudi Tag: Pop3 connector error Tag: 132817
Trend Micro Anti-Virus
I am looking for some feedback from current users of Trend Micro
Client/Server/Messaging Suite.
I am considering their Client/Server/Messaging Suite - 10 users package as
an anti-virus solution for a Microsoft Small Business Server 2000. I want to
be sure I fully understand the licensing before I purchase the product. On
my Exchange server I have about 15 mailboxes configured. However, I only
have 9 workstations. If I purchase the 10 user package, will this protect
only 10 of my Exchange mailboxes or all 15? In other words, is the license
count based on Exchange mailboxes, or client workstations?
If the license count is based on workstations, would I be sacrificing any
protection by purchasing a 5 user license to protect my server and
installing a much cheaper client package like Norton antivirus on each
workstation?
The other question I have is in regards to product and virus pattern
updates. From what I have found I have a 1 year subscription to download all
updates. After the first year is over, what is the annual cost to continue
to downloading virus patterns? I would hope I don't have to invest $600
each year for the latest virus patterns.
Thanks for your input!
Don Tag: Pop3 connector error Tag: 132815
Some user can not login
I installed SBS2000 on a Dell PE server and connected 5
WinXP client workstations with no problems.
After a few days, because of certain issues, I re-
installed SBS2000 on the server and configured it with the
exacts settings (domain name, IP, users, etc) as the
original installation.
The problem is that only the administrator user name and
someone else can login on the workstations. All other
users can not login.
I'm suspecting that I must reset something on the WinXP
workstations in order for the order users to login.
Any help will be appreciated.
Thanks,
Marcos Sebastian Tag: Pop3 connector error Tag: 132808
User and Company Files
Hi
First post so hope I am successful
I am adding a member 2000 server to domain according to white paper and
would like to move user and company folder to new server. Question is how do
I point old and new users to the new server? When clients log on there
folders appear on desk top but would I have to go around each client and
redirect these folders?
Any help appreciated. Tag: Pop3 connector error Tag: 132804
Group Policy and Terminal Services Question
My company has serveral directors who have two computers. One in the office
on the LAN, and one at home. They use their home PC to connect in over a VPN
and use Terminal Services to access their data. I therefore, have two
servers set up, a SBS2K server and a Win2K Server set up for Terminal
Services in Application Mode.
I would like to configure a group policy to disable various aspects of the
directors terminal services sessions (such as disable the shutdown command,
etc.) but allow them normal access to their LAN PC's. I know it is possible
to limit their Terminal Services sessions by settings up a OU in Active
Directory > setting a User-based group policy with the appopriate settings
on that OU > and finally moving the user account into the OU. Does anyone
know how to achieve a scenario where, when they log in at the office these
settings don't apply?
Any help would be much appreciated.
Pete Tag: Pop3 connector error Tag: 132802
Firewall and Proxy setting for ICQ, Hotmail and msnews.microsoft.com
Following a clean install of the SBS 2000, I am unable to access the following from the XP nodes, which are running Microsoft
Firewall Client:
- NNTP server "msnews.microsoft.com"
- Hotmail
- Yahoo messenger
- ICQ
- Windows (MSN) messenger
The above services are not able to connect to the ISA. May be some setting in the ISA is preventing this as I am able to run AIM.
Rajiv Khandelwal
______________
www.vardaan.net Tag: Pop3 connector error Tag: 132799
Small business server
Hello,
I am having a problem with getting sbc yahoo dsl to work
with MS small business server 2000. The problem that I am
having is that the dsl is connecting but I can not use
it. I know the dsl line is good because I can connect to
the internet with a laptop. This is a new install of sbs
on a Dell server. I worked with the folks at sbc and they
think it is a microsoft problem. I beleive I have not set
up something correctly. Is there specific instructions
for a dsl setup? It looks like something is blocking the
final step I have disconnected ISA but still have the same
problem.
Thank You
Joe Bucar Tag: Pop3 connector error Tag: 132797
Explorer.exe error/loss of desktop
After installing SP4, we lost our desktop when we reboot.
An error comes up that explorer.exe has failed and will
shut down. Any ideas to correct the problem?
Thanks in advance.
Rob Tag: Pop3 connector error Tag: 132789
Info Store crash
That was it ! thanks Gizmo, It was the Anti-Virus
Software, we used Sophos. The bit about disconnecting the
mailboxes was because of the fact we'd tried removing
Exchange from AD and re-installing, and it doesn't like it
one bit. No, it was definately the AV Software. We took a
chance and uninstalled it for a week and exchange ran as
normal. We then re-installed sophos and everything carried
on as normal. We also made sure that the AV was not trying
to scan drive M: - Hope you crack it
Rick Lewis
[MCP] Tag: Pop3 connector error Tag: 132774
Trust relationship and Computer
I am getting the following error message in the application log regarding the computer nodes and the domain:
Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5513
Date: 28/09/2003
Time: 10:17:19 AM
User: N/A
Computer: SERVER
Description:
The computer V4 tried to connect to the server \\SERVER using the trust relationship established by the DOMAIN domain. However, the
computer lost the correct security identifier (SID) when the domain was reconfigured. Reestablish the trust relationship.
I am not able to run vbscripts for copying files to the other nodes as we get the error message of "Permission Denied".
I shall appreciate a helpful hint from the gurus here.
Rajiv Khandelwal
______________
www.vardaan.net Tag: Pop3 connector error Tag: 132769
New VPN installation has ISA problem?
I have an SBS2000 installation at home on which I have just run the Remote
Access wizard. It happily lets me login via a workstation at work. But
about a day after setup we are finding here at home that workstations
intermittently cannot surf the web. The ISA client refuses to refresh at
this time (either the server is down or it is not an ISA server is the
message, although it immediately refreshes if I put in the IP no of the
server... but still no browsing.) The problem seems to go away after a few
minutes. Also we are finding that some people are having trouble logging on
here.... again an intermittent problem.
We have a fixed IP with a 56k modem here at home.
All the packet filters are enabled. I have found one warning in the
application log that isa server was dropping packets, but it does not
correspond to the times of difficulty.
Is there a common problem here that anyone is aware of? I'd be glad to hear
from you Tag: Pop3 connector error Tag: 132767
Help! Can't get SBS 2K to install on Dell PE 400Sc
I get an 'invalid license key' error - but I purchased
SBS2K directly from Dell so it should be legit. Also
tried a license key supplied by Dell Tech Support - got
same error.
Any ideas? I hate to send this server back to Dell and
give up but will, if I have to.
Thanks,
Bill Tag: Pop3 connector error Tag: 132765
Web Site Hosting Problem
I am running SBS 2000 and am having a problem getting my
websites to publish. I have two web sites I am trying to
host. (My box has two nics and I am using host headers)
I have installed the frontpage 2002 extensions and can see
and work with the default web site just fine. However I
cannot access the other two sites with frontpage or the
server admin pages. When I try to go to the site from the
admin page it says:
11001 - Host not found
Internet Security and Acceleration Server
-----------------------------------------------------------
---------------------
Technical Information (for support personnel)
Background:
This error indicates that the gateway could not find the
IP address of the Web site you are trying to access.
ISA Server: ct-101.(mydomain).local
Via:
I would appreciate any help! Tag: Pop3 connector error Tag: 132763
FAX services SBS 2000
Hello,
I have the fax service running and it receives faxes
fine. I have it setup to receive a fax and send it to
sending it to emial and to print. The email portion works
100% but printing is a little shakey. Some times a blank
sheet of paper prints other times nothing. Ad then
sometimes it all works. Any clue? Tag: Pop3 connector error Tag: 132759
ISA security
A workstation part of the SBS2000 network connects to a
service called OASIS by modem. After a successful
connection the workstation will need to use ie's browser
to submit claims. I make the connection but I can't
browse the site with ie. Any clues? Tag: Pop3 connector error Tag: 132758
System Mailbox - how to retrieve mail
My mailbox store shows a SystemMailbox under the mailboxes menu. This SystemMailbox shows 1256 items in it. How do I retrieve them?
Rajiv Khandelwal
______________
www.vardaan.net Tag: Pop3 connector error Tag: 132757
TSServer Licence needs
Hello all,
I'll be gals when this TServer is in and done. One (with many parts) more
question.
If I use Windows 2003 Server do I need to purchase TS licences for W2K
clients? I know that XP and W2K do NOT need TS licences for Windows 2000
Server.
How much are TS licences? I read a post suggesting that If I buy Windows
2003 Server I can install Windows 2000 Server from my existing SBS disks and
use the 2003 Server licence to cover it, is this true?
M Tag: Pop3 connector error Tag: 132724
SP4 is not available for client deployment
Hi,
I installed SBS SP1a which included SP4 for 2K server. I
have 2 problems.
1. The install instructions indicated that the SP4 would
be available for attended install the next time a client
user logged on. Does not happen and SP4 is not available
in the the add software app. Outlook 2002 is avaiable for
deployment. All clients are Win2K SP3.
2. I cannot access the modem. The computer can query the
modem, however, it will not trigger a dial out.
Thanks for any advise.
Bob.. Tag: Pop3 connector error Tag: 132721
Limited time access to a computer
I would like to set a limited tme to a computer, to which an user shall have
an access.
In the user addiministration pannel it is possible to set this.
I observed that it is working tis way so the user really canot logon if the
time is not right.
But as long as he is logged his computer works regardles of the fact that
his time to logon is over.
Is there any way to limit a time the user uses his computer (this mean
closing th session after the user time is over).
with regards
Marek Staniewski Tag: Pop3 connector error Tag: 132706
Access to a file
We have set up an agreement with an outrside andomistrator who will get from
us a full remote acess to our server.
I wander if there is any way not to allow him to access a disk with our
company data? Theoretically no problem but since he is an administrator he
will probably make an access to the drive.
Any advice?
Marek Staniewski Tag: Pop3 connector error Tag: 132704
SBS Freezing Up
I have a Dell PowerEdge 2600 Dual 2.4 machine with 2GB running SBS (Exchange
and ISA) with 16 users. This system has been deployed for about 7 weeks now
and a problem has occurred for the last two weeks or so.
Every few days the system basically locks up and requires a reboot to get
everything running again. The course of events begins with the Information
Store shutting down and basically the system just gets slower and slower
from that point until a reboot is done. After the reboot everything is good
again for 2-3 days and the same issue occurs. Each time I have verified that
the Info Store is down and you can not simply restart it - that fails as
well. For the time being I have set a dependency on the Info Store service
that if it fails to reboot the PC. Hopefully this will buy me a few more
days.
Any suggestions?
Thanks
Kevin Tag: Pop3 connector error Tag: 132697
Event ID: 2019 nonpaged pool empty
Recently we had a problem at a customer's site where 12 of 16 desktop PC's
were failing.
These are Dell Desktop PC's.
The failure occured every 5 days, like clockwork.
When the failure occured the event viewer was filled with:
"Event ID: 2019
Description: The server was unable to allocate from the system nonpaged pool
because the pool was empty"
Note that 4 of the customer's PC's did not develop this problem.
Task Manager, Performance tab, showed that the "non-paged" Kernel memory was
slowly but steadily being used up.
This resulted in a non-functioning PC after 5 days.
Researching the event on the internet led to:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;177415
"How to Use Memory Pool Monitor (Poolmon.exe) to Troubleshoot Kernel Mode
Memory Leaks"
The use of poolmon indicated a problem with a "tagged" driver, where the tag
was "Smax".
http://support.microsoft.com/default.aspx?scid=kb;EN-US;298102
"How to Find Pool Tags That Are Used By Third-Party Drivers"
Poolmon requires the user to watch the display for hours.
Several high usage "tags" were noticed.
Several of these tags can not be found using the above method. Presumably
these are Microsoft drivers, and therefore need not be found because they
could never be a problem. Hah.
The driver found was:
c:\winnt\system32\drivers\smwdm.sys
driver name: smwdm.sys
file version: 5.12.1.3508
modified: may 28 2003
This driver is used by the "SoundMax Integrated Digital Audio" device.
The driver is authored by Analog Devices.
The remaining 4 not-failing PC's had a different driver:
driver name: smwdm.sys
file version: 5.12.1.3538
modified: dec 20 2002
Note that the revision number differs in only one digit.
We used device manager to disable the SoundMax Integrated Audio.
Task Manager, Processes tab, showed that the Kernel Memory Nonpaged usage
growth stopped immediately.
Trying to do the right thing, we went searching for the updated driver.
Since these were Dell PC's, we went to the Dell driver download site.
At the Dell site, the SoundMax is also named "Analog Devices AD1885
Integrated Audio" .
Unfortunately Dell only provided the failing driver version, and not the
newer version.
Yes, the 4 non-failing PC's were Dell also.
Dell does not keep the drivers download section up to date.
We went to the Analog Devices site.
Unfortunately, Analog Devices does not provide drivers for download, and
instead refers users to the PC Manufacturer or Mainboard manufacturer.
Since Dell was not helpful, we looked at intel, who manufactures the Dell
mainboards.
Intel provides many drivers for many motherboards, and many drivers for
"Analog Devices AD1885 Integrated Audio".
But these drivers appear to be Mainboard specific.
We did not have the option of traveling to the customer's site, and
dis-assembling each PC to determine the Intel Mainboard identification.
An updated driver for these PC's has not yet been found.
But we have at least solved the main problem. The loss of sound capability
can be handled.
This problem has cost us a considerable amount of time and trouble.
The result of the problem is a mysteriously dead PC.
Since Dell, Microsoft, Analog Devices, and Intel were all involved, it
should have been much easier to locate and repair.
I post this here in the hopes that others may be spared the time and
trouble. Tag: Pop3 connector error Tag: 132694
4 processors showing up
New SBSer here,
I have a dual processor machine with a fresh SBS
installation, showing 4 processors in the server status
console (performance counters section of the window). Is
this normal?
Also, just hooked up the first workstation and it takes a
very long time to log in. I have pretty much just run
through the to do list and that is all. This is a brand
spanking new setup.
thanks in advance gang...
Fred Tag: Pop3 connector error Tag: 132685
SBS Server 2003 set up
I'm opening another office and want to keep customer
information at only one location. I plan to use VPN for
the remote clients to access the server. I plan to use MS
Access for the client forms (I know it integrates with SQL
Server), and to use Quickbooks Pro too.
Is it a problem to use Quickbooks Pro (allows networking)
on one server for both offices, and will there be a
signficant decrease in speed in my remote applications if
I'm using a regular DSL connection. Tag: Pop3 connector error Tag: 132683
Still have probs with DHCP
Hi, I've read thru the posts here and tried the fixes w/o success.
Here's what I have done:
1. I have a SBS 2000 with 1 NIC. Default setup.
2. If I set static IP, I can see / login to server.
3. DHCS, WINS, DNS all running w/o errors.
4. Added 003,006,044,046. to DHCP scope. No change. Even tried 015. No
change.
5. Tried 046 with 0x1 and with 0x8. No change.
6. Problems exist with workstations running XP Pro and also Win98.
Static IP's work fine.
7. Tried to remove autosense from NICs. No change.
8. ipconfig /renew give me an error: unable to connect to your dhcp
server. request has timed out.
I'm running low on ideas :)
Any help would be really appreciated.
-Mark Tag: Pop3 connector error Tag: 132678
Please help !!!!!!
I am trying to get the pop3 connector to work. The error
in the event log is 10065. Am I overlooking someting
stupid??
"Hilton Heifer" <mail@deletemeheifer.org.za> wrote in message
news:1a1f01c3866f$2effe540$a101280a@phx.gbl...
> Please help !!!!!!
> I am trying to get the pop3 connector to work. The error
> in the event log is 10065. Am I overlooking someting
> stupid??