Masil
Fri Dec 17 13:38:16 CST 2004
Hi,
I actually have the same problem for a week now with Win2k
client station and XP pro client station. The Modem
Sharing Client are already installed on both clients and
Modem pools are configured on the SBS 2000 server
(Configuration tab in Modem Sharing Service of Control
Panel). I do not know anymore where to go from there.
Any help?
Regards,
Masil
>-----Original Message-----
>did you do this part
>Installing Modem Sharing Client
>To install Modem Sharing Client: 1. Double-click Network
Connections in
>Control Panel.
> 2. Right-click Local Area Connection and click
Properties.
> 3. Click Install, click Service, and then click Add.
> 4. Click Have Disk, and then navigate to the folder
where you
>extracted the Modem Sharing Service patch files.
> 5. Click Netsrdr.inf, click Open, and then click OK.
> 6. Click Shared Modem Service Client and click OK.
> 7. After the files are copied, click Close.
> 8. Restart the client.
>
>
>--
>CRIS HANNA
>SBS-MVP
>--------------------------------------------------------
>Please do not respond to me directly by email but only in
the newsgroups so
>that all can benefit from the information
>"howard" <howard@discussions.microsoft.com> wrote in
message
>news:D73259B4-41FA-47A4-8ADF-9B2F50CD0350@microsoft.com...
>> Merv - that procedure had no affect at all. I had seen
it earlier but
>> discarded since it was written for SBS 4.5 & Win2k
clients - not SBS 2k &
>XP
>> Pro clients. What gave you the idea this would resolve
the problem?
>>
>> Surely this is not virgin territory...
>>
>> Howard
>>
>> "Merv Porter [SBS-MVP]" wrote:
>>
>> > Have you followed the procedures in:
>> >
>> > Configuring a Windows XP Professional Client in an
SBS 4.5 Network
>> >
http://support.microsoft.com/default.aspx?scid=kb;en-
us;315773&sd=tech
>> > under - "Configuring Modem Sharing Client"
>> > --
>> > Merv Porter [SBS MVP]
>> > ===================================
>> > "howard" <howard@discussions.microsoft.com> wrote in
message
>> > news:A6E2F768-A20B-4FC8-9314-
ABB1394AA010@microsoft.com...
>> > > Client responds to the 'netmodem use' command with
the SBS2k Modem
>pool
>> > but
>> > > the modem does not show up when I attempt to
install the modem on the
>XP
>> > Pro
>> > > client. Rebooting does not help.
>> > >
>> > > Any ideas?
>> >
>> >
>> >
>
>
>.
>