SUS
Hi Team
I have a very puzzling problem. I have had quite a bit of experiance with
Software Update Services and are using it on a few of the networks I look
after but I am having one network which is causing me grief. I have setup a
group policy which tells the clients where to get the updates (i.e their
server) and scheduled the install for 12pm each day. None of the updates
are being installed on the workstations. I have checked out the windows
update.log file and it appears to be contacting the server and downloading a
catalogue etc.
Any suggestions would be greatly appreciated.
Daniel. Tag: Security Event Monitor Tag: 152623
XP, or Not XP....that is the question.....
As noted here before, I have been trying to deploy an XP box on our SBS2K
network with miserable success. When browsing network drives, the machine
would just hang and hang. Sometimes browsing would be fast, other times the
machine would actually go into the "not responding" mode. So I figure this
new XP box is killing me and my network.
Low and behold, I'm on the server yesterday trying to view some files and
while navigating through directories suddenly I get the hourglass and have
to stand and wait around a minute before my LOCAL drives and directories
appear. What in blazes is going on here?! I'm at a record low as far as
critical errors go in the event logs, all the patches ahve been applied (and
I'm starting to suspect they may have been the culprit) and I', flat out at
a loss to figure out why I'm having such huge delays in browsing. Before all
the patches, the screens would pop as fast as I could double click, now
there is at least a minimal wait on almost all machines.
To the best of my knowledge, the DNS is fine, but if somebody cares to
elaborate exactly what I should be looking at inthe DNS, I can double check
it.
Thanks. Tag: Security Event Monitor Tag: 152620
PDA sync to Exchange via TS
Someone must have been asked if this can be done before?
Remote clients use Outlook 2000 in TS application mode on SBS2000 box and
want to sync their Ipaq/Palm PDA - i'm sure this cant be done out of the
box - any third party apps do this ?
Thanks Tag: Security Event Monitor Tag: 152605
VPN Access
We have set up a VPN. Is it possible to allow a user that is coming in
through the VPN to have access to a SMTP server out on the Internet and if
so what is the best way to set this up. Thanks.
Richard Tag: Security Event Monitor Tag: 152602
SBS 2003 & Outlook Web Access Requirements
Caution, I'm an Exchange/OWA newbie...
I have just purchased SBS 2003 and am interested in setting up OWA 2003.
Although I have looked pretty thoroughly, I can't find definitive
information (let alone a "step-by-step" or "how to") on the requirements or
procedures. Can someone point me in the right direction? I realize that I
need to have another computer in the DMZ as the back end server but I am
unclear on the following:
-To run OWA 2003, do I need to buy another copy of Server and/or Exchange
for the back end server? Do they need to be 2003?
-Do I need to purchase IAS for the back end server?
-If the answers to the above are yes, are the requirements for OWA 2000,
less imposing (i.e., IIS vs IAS)
From the marketing, it sure seemed that setting up OWA was going to be a
piece of cake as long as one had a DMZ and an extra box lying around.
Apparently there is more to it than that.
Thanks in advance,
Bruce
Bruce Palmer, MCSA, MCSE
New York, NY Tag: Security Event Monitor Tag: 152595
W32time and opening port NDP port 123
I have had a problem with two domain controllers in our network no longer
replicating as the time difference between the two became more then than 5
minutes.
On the operations master (also acting as the PDC) i want to setup W32time to
use an external time server (time.micorosoft.com). W32time logs NTP server
not responding and ShieldsUp! reports 123 as being closed on our network. So
I guess the port 123 is blocked by our ISA server. How can I open this port
to send receive?
TIA,
Fred Blum Tag: Security Event Monitor Tag: 152594
Email problem
Hi,
We are using SBS2000 with around 30 Windows 2000 Pro
clients and around 2 WinXPP clients.
Our Internet connection is Broadband via our ISP
BTOpenworld. We send out emails via BTOpenworld's SMTP
server. Furthermore, we pick up emails from a POP3
account at another ISP for our domain which is xxx.co.uk
(example). BTOpenWorld have "Apparently" added our domain
name 'xxx.co.uk' to their SMTP DNS server.
The SBS's Domain is called: 'ABC' and the SBS machine name
is called 'ABC-SBS'.
Each user has a mailbox in Exchange, e.g. john@xxx.co.uk
Problem: A user tried to send an email to a recipient and
got an undeliverable (it is the correct email address!):
--------------------------------------------
There was a SMTP communication problem with the
recipient's email server. Please contact your system
administrator.
<abc-sbs.abc.local #5.5.0 smtp;554 <abc-sbs.abc.local>:
Helo command rejected: Set a valid hostname>
--------------------------------------------
Please can you tell me what the problem is?
EMails to other recipeints are OK, but this particular
recipeint is causing a problem by us getting undelierables
with the message above.
Any comments and suggestions will be appreciated.
Thanks,
skc Tag: Security Event Monitor Tag: 152589
SBS2K3 - Initial Install Fails
Hi All
I can't seem to get past the 13 Min to go point in an initial install of 2K3. It is stopping ( and cycling over and over) at the "Registering Components" section
I have tried killing the machine, to re-start. But this just sends it back to the start
I would now like to completely format the HDD again and start from scratch, but I no longer am able to boot from CD as it automatically launches the previous install. How can I stop this from happening, or identify what is causing the problem
Any help would be great
Paul. Tag: Security Event Monitor Tag: 152587
How to allow inbound mail from external domain but refuse outbound mail to same domain?
[SBS2K] How can I allow inbound mail from a specific domain whilst blocking
outbound to the same domain?
My problem is that I am implementing Trend Scanmail E-manger Anti-spam (part
of the new CSM-SMS suite) and I need to be able to notify some recipients,
i.e. upper management, when a spam mail is received (so that they can
retrieve it if it has been wrongly identified).
However, some mail from mailing lists (e.g. sbs2k@yahoogroups.com) is being
blocked by Emanager. Because I am notifying the recipient a message is sent
back to the mailing list!
How can I deal with mailing lists properly when using Trend E-manager
antispam? GFI MailEssentials allowed whitelist addresses to be specified by
SMTP To and SMTP from, so could handle this kind of situation.
Thanks
Neil Tag: Security Event Monitor Tag: 152577
Hostname Issues with Win 95 Client (Ping)
Hi - having a bit of problem with my win95 (urgh!) clients...
The Setup:
We have a sbs2000 multihomed server with a slightly odd pair of Ip addresses
(not setup by us)
The internal IP is 111.111.111.150 with subnet 255.255.0.0
The external is 10.0.0.11 subnet 255.0.0.0
And no, i haven't got that wrong....
The external address goes to a firewall - which is why it is a 10.0.0.11 and
not a "proper" external IP. (please excuse my improper use of
terminology...)
We have ISA running on the server, as well as exchange, and it is a domain
controller and DNS Server (like most SBS boxes i presume)
The problem:
If a win95 client pings the server it will occasionally resolve to 10.0.0.10
and other times resolve to 111.111.111.150. This seems to be causing some
problems with MS Outlook trying to connect to exchange - it should just
resolve to the internal address (111.111.111.150).
We have win98 and winxp clients on the network too, and these seem
unaffected. For the moment I'm looking at editing the lmhosts file - please
correct me if there's a better (server-side?) fix.
Thanks in advance,
Ewan Tag: Security Event Monitor Tag: 152576
OT: SBS Companies
Hi
Can anyone recommend a UK (London based) company that does sbs installation
for a small (10-15 users) organization?
Thanks
Regards Tag: Security Event Monitor Tag: 152574
Rerouting an email
How can I reforward an email box on exchange 2003 to an another mail box on
another domain. forward name@my.com to name2@another.com
Thanks Tag: Security Event Monitor Tag: 152565
SBS2k, VERITAS 9, Backup Exec SQL Svr Backup
I feel like a beginner at times and I have a basic question that perhaps
you've run across in the past.
Using Veritas 9.0 to backup an SBS2K server. Looked at the backup
"selections" and noticed that "Microsoft SQL Server "BKUPEXEC" shows up in
the list underneath the server, and there is a "/" blue diagonal in the box
stating that this is selected to be backed up.
But when I look at the job history, there are 0 files, 0 folders in this
set.
Have another imaging program that also uses MSDE and this, too, is listed in
the selections but no files or folders are backed up.
What am I missing? I know the files are getting backed up.
Is this because MSDE is being used instead of the full blown SQL software?
Or there is nothing worth backing up, SQL server wise?
John Tag: Security Event Monitor Tag: 152564
OT: Patch for Security Bulletin 04-007/ASN.1 for Win 98/ME machines
------------------------------------------------------------------------
http://isc.incidents.org/diary.html?date=2004-02-22
"Windows 98 ASN.1 Patch
Readers reported to our handlers team that Microsoft is distributing a
patch for the ASN.1 issue to Windows 98 users per request. If you are
running Windows 98, contact your Microsoft representative for the
location of the patch.
As reported earlier, the ASN.1 advisory MS04-007 only covers newer
versions of Windows. Windows 98 is however still vulnerable.
Workaround: you may want to consider renaming or removing msasn1.dll.
However, please test this fix carefully as it may break some software.
Careful! Do not trust any patches sent via e-mail. "
--------------------
I can confirm that if you call MS PSS, option 3 for hotfixes and ask for
hotfix for Windows 98 and Windows ME for KB 828028 you can easily get
them FOR FREE.
US (800) 936-4900 or UK (0870) 60 10 100 other numbers through
http://support.microsoft.com/common/international.aspx?gssnb=1
If you have Windows 98/Me machines, either call that number or contact
your support/TAM account representative.
Susan
--
http://www.sbslinks.com/really.htm Tag: Security Event Monitor Tag: 152559
Put Server WAN on Public IP Address?
I'm considering putting the server's WAN NIC onto the public IP address we
heve registered. I'm concerned though, that this will allow hackers into
the server. We are using Excange SMTP mail and are running 2-3 VPN
connections into the office.
Can anyone give their opinions on whether it's wise to put the server on
the 'net or is it best to add an appliance (like SonicWall or another
firewall) in front of the server?
Thanks for your comments.
--
Michael Rudnick
news@RCC-pcSupport.com Tag: Security Event Monitor Tag: 152555
ADSL Router for SBS2k
Hi all,
Just looking for any recommendations for a requirement we have:
SBS2k - configured with 2 x NIC - ADSL on external NIC - Router and Modem
presently
We're having some issues which we suspect are the Router and are
investigating alternatives. Requirements are noted below:
1] Either a Router/Modem combination or Router with in-built connection to
ADLS line
2] Router must have capability for VPN termination on-board [we have demo
equipment on the external side of our SBS box that needs to be available for
demo to non-domain users] - therefore these users will VPN onto the
Broadband Router to access the demo kit
3] Remote LAN users will set-up a primary VPN to the Broadband Router with a
secondary VPN tunnel through this primary VPN and onto the SBS box's
external NIC
If anyone has implemented such a solution or could recommend either a
Router/Modem or Router with ADSL connection on-board, this would be
appreciated.
Regards,
David Tag: Security Event Monitor Tag: 152541
XP notebooks
Hi All,
While our server seems to run fine (server 2000 + exchange
2000), since adding some xp client computers the xp
clients seem to run slow & occasionally hang. I have set
the DNS locally & they log on quickly but in normal use
seem slow over the Lan, if you take them off the Lan then
they run at full speed.
Help! Tag: Security Event Monitor Tag: 152539
Outlook
Please if someone know how to resolve the problem: When I connect to Exchange server with outlook I cant see any mail that I should receive, but I know that Exchange picked up mail because we use external mail server from which exchange picks up mails via pop connector and I connect to that server and there arent any mails, which means that echange picked them up but he doesnt put them in the inbox of the user for which he should??
Thanx on all your answer Tag: Security Event Monitor Tag: 152538
AD You do not have permission to change password Error
I receive this error when users log on:
You do not have permission to change your password.
I've followed the instructions below:
However, users who choose not to change their passwords when the Password
Change Notification message appears (by clicking No) are logged on with
their old passwords and then can change their passwords. This system
behavior occurs when the Everyone group hasn't been granted the Change
Password right on the user object. Users can't change their passwords over
the null session connection (anonymous logon relies on the Everyone group to
carry out this action) established between the workstation and a domain
controller. Instead, an authenticated session is required to change a
password (i.e., users must be logged on to change their passwords).To change
the permissions setting for the Everyone group, take the following steps:
1. Start the AD Users and Computers snap-in (Start, Programs, Administrative
Tools, Active Directory Users and Computers).
2. Select the View menu and enable Advanced Features.
3. Right-click the container hosting the user object to which you want to
grant the Change Password right (e.g., Users), then click Properties.
4. Select the Security tab. Ensure that the Everyone group is listed in the
Name box. If it isn't, click Advanced, then add the Everyone group to the
list from the Advanced Access Control Settings dialog box. If the Everyone
group is listed, click Advanced.
5. Click the Everyone group in the list, then click View/Edit to edit the
group's permissions. In the Apply Onto box, click User Objects. In the
Permissions section, select the Allow check box for "Change Password."
6. Click OK to accept the changes.
However users still can't change passwords...Anyone know what I could be
missing?
Robert Tag: Security Event Monitor Tag: 152537
Should we defrag SBS2000 server drives ?
We use SBS2000 and have 1 drive partitioned with C:(4gig) and E:(28gig).
Should we defrag these drives ? They look pretty bad when we analyze them.
Thanks,
Tony Tag: Security Event Monitor Tag: 152524
Old web page keeps showing up
Company web site is hosted externally and is currently under going
remodeling. When it is accessed externally it displays that the site is
under reconstruction. The problem is when accessed from internally the old
web page shows up. I have stopped the web proxy serv, deleted the *.cdat
file in the urlcache folder, restarted web proxy numerous times but still
shows old site page. I have rebooted server & at least one workstation,
still broke. Deleted all cookies & temp internet files from server and
flushed dns. What else should I check? Tag: Security Event Monitor Tag: 152522
small business server with exchange server
Does each mailbox require a license?
i.e. 50 mailboxes = 50 licenses?
i am trying to determine if i want to go with exchange server, or an open
source version.
thanks
brandon willis
__________________________________________________________________ brandon
willis ICQ#: 292915581 Current ICQ status: + More ways to contact me Get
ICQ! __________________________________________________________________ Tag: Security Event Monitor Tag: 152518
SMTP Relay problems
I have an application on each workstation that needs to send SMTP Email. I
thought that I would be able to just enter the name of the SBS Server as the
SMTP Server. What is happening is that any message that is addressed outside
of the SBS Domain is just lost. I donot recieve any error messages, the
message just never arrives. I have also tested this using outlook express on
both a workstation and on the server. OE works properly on the server, but
the test messages get lost when there sent from the workstation Tag: Security Event Monitor Tag: 152515
SBS V4.0
I have got involved with a company who have SBS sever V4
running. Budgetry constraints mean they cannot upgrade
till later in the year, so i will have to do what I can
till then. They have had broadband installed will I be
able to configure the proxy server to run via a BB modem
connected to a 2nd nic or will I have to bypass proxy
server. Secondly I suspect it wont be possible to use pop3
mail with exchange server am I correct and advice (besides
upgrade!!!) would be appreciated
geoff Tag: Security Event Monitor Tag: 152514
Not sure where to start (Terminal Server)
Hi,
We are running a SBS2000 network with an attached Win2k
server. We need to temporarily set up this seperate win2k
server to allow terminal server (we have a 3rd party
contractor who needs access to the server from outside our
network.) I have never run terminal server on the sbs2000
box let alone on the seperate win2k server. I'm not sure
where to start. How should I go about setting this up?
Any advice, links etc would be appreciated. Tag: Security Event Monitor Tag: 152507
Tutorials / guides wanted....
Hi, I have been looking at the net for some decent tutorial, but have been
unable to find decent ones. The subjects I need are;
- Setting up a scheduled backup on SBS2000 or SBS 2003 to backup files and
Exchange.
- Migrating exchange from SBS4.5 to SBS2003 (backup software is Arcserve)
- Migrating exchange from SBS2000 to SBS2003 (backup software is Arcserve)
Thanks in advance
Robbie Niblock
Northern Ireland Tag: Security Event Monitor Tag: 152495
Uninstallign ISA and one NIC
Has anyone uninstalled ISA and ran the SBS 2000 with one
NIC. ISA is causing me problem with the Web proxy always
crashing. On the phone with MS and they make me clear
the cache and bypass the service from the cleints but a
week later it crashes. Any insight would be great.
Peter V Tag: Security Event Monitor Tag: 152494
SBS 2003 OWA Calendar not working
I have recently set up a new SBS 2003 server behind a
firewall and have configured port forwarding to enable
access to Outlook Web Access from the Internet.
Users are able to connect and log in OK and get to their
mailbox, and the Basic version works fine. But the
premium version calendar does not work at all, we are
just getting a "View Updating" hourglass which never
times out or gives an error message.
This does not happen if we access OWA from the browser on
the server itself on a Remote Desktop Session but still
does not work if we connect via VPN to the Server
directly, rather than through port forwarding.
Either there is some problem with the firewall, I have
not enabled enough ports or there is something on the
client Machines (Windows XP Pro running Outlook 2000)
that is stopping it working.
I am really hoping that someone has a solution for this
as we were hoping to use OWA at remote sites to avoid the
complexity of setting up VPN and direct client
connections.
Any ideas appreciated.
John Wilson Tag: Security Event Monitor Tag: 152493
SBS OEM on Dell, how many users licenses ?
I am looking for SBS 2003 on my Dell server. I can not find anywhere about
the quantity of license for th product. I am suprised because SBS is
cheaper than the standard Windows 2003 Server.
Jean-Georges Tag: Security Event Monitor Tag: 152491
Exchange Restore Not Working!
I get the following message when trying to restore my Exchange Information
Store. I get the following message.
The specified server is not a Microsoft Exchange Server or its Microsoft
Exchange Services are not started restore.
All the services are still running on the original machine. I am not sure
why it is not reading it as an Exchange Server. The C: Drive and System
State restored fine.
Please help. Tag: Security Event Monitor Tag: 152490
pop addresses in global address list
ok we have a load of people with pop address that are not in exchange but
share the same domain name in their email address
is there away of adding there addresses to the global address list?
i have tried adding them as a contact (with and with out an email address
setup)
but when you use the address from the list it bounces with
The following recipient(s) could not be reached:
sure I am missing something simple
Thanks for any help you can give Tag: Security Event Monitor Tag: 152489
Network or Disk Error
Hi
This message occours 2 o 3 time per day.
The message in italian is "Errore di rete o disco"
Only some workstation per time, not all, give this error
then exit user from them programs.
Something, shared access databases (acc2002+access 2.0)
being corrupted.
My network places is like this:
1 hp netserver with w2000sbs
10 desktop with wxp pro
10 desktop with w2000 pro
2 stacked switch 10/100 3com
5 printer server various producer
Someone had this same error? Tag: Security Event Monitor Tag: 152486
POP3 Connector SBS2000
Help!
We have a SBS2000 server with the MS POP3 Connector
fetching e-mail from our ISP (We connect via a router and
ADSL). All has been running fine for 12mths but now the
POP3 Connector stops running at every scheduled mail run.
Log just states that the POP3 Connector has terminated
unexpectedly.
I can re-start the service everytime but it falls down
again at the next scheduled mail run.
Thanks Tag: Security Event Monitor Tag: 152482
SBS2003-Messed up profile copy
G'day,
I was called in to help fix a blown SBS2003 Installation. As the 4th
person called in, they have allready really messed things up.
Somebody set them up with a home gateway router and only one NIC in
the server and who knows how they answered the install wizatrd. They
tried to join the PC's to the domain but didn't realize what a
computer name is or what a user is. Quite a mess since they did this
same abortive domain join on 4 of 5 clients. I have added a second
NIC and re-run server setup. Joined the one pc they didn't screw up.
I absolutely love the new profile copy routine! It is just fantastic
and something sorely missed in SBS2000. Anyhow, on the "bad" clients,
the profile copy routing "never ran" according to the user. I do see
where 2 temporary and sparcely populated profiles with __sbs__ type
names were created on each of these PC's. When I try to re-run the
web-based profile copy routine it will not let me, says the profile
permissions must be changed to allow access. I open up all
permissions on the old profile and am logged in as administrator, no
help. I am thinking of disjoing the domain (go back to workgroup) and
re-joing to re-invoke the process? Anyone suggestions? Tag: Security Event Monitor Tag: 152471
ExMerge
I have an SBS server running ExMerge, used to enable
e-mail backup. There are 3 log files on the C: drive
ExMerge.log, ExMerge-(Thread0).LOG & ExMerge-
(Thread1).LOG. I need to freeup space on this drive. How
do I change the settings in ExMerge in order to achieve
this. Tag: Security Event Monitor Tag: 152462
OT: Going UK Rates
Hi
How much can someone installing sbs2000 expect to charge these days in UK?
Thanks
Regards Tag: Security Event Monitor Tag: 152449
Windows CE and Windows 2000 SBS
Hello All--
I would like to know can Windows CE log onto Windows 2000 SBS and run
programs from the server. Or does the program I'm trying to run need to be
compliant with Windows CE.
Thanks,
taylor
ltii Tag: Security Event Monitor Tag: 152431
Server just froze
Does anyone have an idea why a server would just freeze?
Around 2pm today my cleint called me and told me the
network is down. When I got there the server was frozen,
ctrl-alt-del was not working. I hard booted it and
everything was fine. The Anitvirus showed nothing
unusualy as I block almost every attachment from email.
I scanned all workstations and all came up clean. Any
ideas would be great. Nothing in Event viewer as unusual.
Peter V Tag: Security Event Monitor Tag: 152429
Repairing AD
Any pointers on how to or where to start repaiding AD.
Any of the few things I am tring to do on my server after I upgraded to
sbs2003 returns the error,
"Cannot access Active Directory"
Pat Tag: Security Event Monitor Tag: 152428
XP client getting 403 forbidden message after a while
Hi,
Can anybody help please, I have some XP clients that have problems
using IE. the users can access the internet for about 2 minutes (or
about 5 www addresses) and than they receive the 403 Forbidden page
from ISA they all have the proxy client installed.
All my W2K workstations don't have this problem just the (new) XP
workstations.
Thanks in advance,
Victor Tag: Security Event Monitor Tag: 152418
ICS
We have SBS2003. We also have an ADSL dial-up broadband
modem. I use the Internet & E-mail connection wizard and
input all my dial-up ISP settings. I cannot then connect
to the internet.
However, if i create a manual connection (Network
Connections -> New Connection) then I can connect fine.
But how do I share this connection with the other
computers in the office? It seems there is no ICS. The
network operates perfectly since I can see all computers.
What do i do???? Tag: Security Event Monitor Tag: 152417
Exchange 2000 equivalent for "Command Line Mail Sender"?
How can I email a file (specifically an important .xls spreadsheet) to a
select set of users each morning automtically? We are Exchange 2000 users.
I've seen some tips/tools on an Exchange 5.0 tool names "Command Line Mail
Sender" which (apparently) could do this without any user intervention and
without Outlook having to be started.
Is there an equivalent tool in Exchange 2000? Or, is there a better way?
Thanks, John Tag: Security Event Monitor Tag: 152411
free 5 cal shipping time?
how long does it take to get the promo 5cal that ended recently? is there a
way to check on progress? Tag: Security Event Monitor Tag: 152408
Help - 2nd server (Terminal Server) behind ISA and NAT
I have configured a second server, which is to act as a
Terminal Server, on my SBS2000 network. I am running ISA
and NAT on the SBS2000 DC. I have a block of 4 public
IPs from my ISP, but I am sort of confused on how to
access the server from the outside if it has a private
10.10.10.x static IP address to access the SBS network.
The only WAN side IP is the one on the WAN SBS2000
server. How would users be able to hit the Terminal
Server? I am so confused. I have been researching
everywhere and getting nowhere quick. Is there a way to
publish another public IP address to the WAN side of the
SBS2000 server, then route it through ISA to the Terminal
Server, so the remote users can hit it? Any help or
direction would be GREATLY appreciated.
Thanks
Justin Tag: Security Event Monitor Tag: 152400
ISA - Remote Management
Is it possible to manage ISA through Web (using IP
adress)? Or the only way is through Terminal
Server/similar programs like PC Anywhere Tag: Security Event Monitor Tag: 152395
General account specific email boxes
Subject says it all, I have a general login to my win2k
clients. I am wondering if I can setup specific mail boxes
from the clients with the general login or if I would have
to creat the specific logins with the email boxes.. I am
having problems with client scripting and am going the
hard way on this.. My client scripts are not working
properly, so whenever a new client is added I have to
login to the client machine and set everything up
manually.. I created a general account to bypass this
issue. Before I used a general email account for emails,
now I am having to use specific email accounts. Can anyone
help me out on this? I dont want to have to get back into
the client scripts.. I know this is the hard way around
and going with the client scripts is the easy way, but I
cant get the client scripts to run.. Tag: Security Event Monitor Tag: 152394
Hi,
How do you add items to the security event monitor? For
example, I would like to see when people logon the network
via Terminal Server.