Routing and RemotAccess

After harddrive problem got the server up by renameing
system.sav to system in system/config directory.

Have done few reinstall of everything using setting up
your server ....

most things working

Cannot get Routing and remoteacess services to start tried
removing and reconfigureing and here are some of the
messages....

"To support the relaying of DHCP messages from remote
access client you must configure the properties of the
DHCP relay agent with the address of your DHCP services"

Error message:
" Routing and Remote Acesss cannot verify that the default
remote access policy matches the setting for the server.
The following error acourd Invalid access to memory
location (800703e6)"

ERRORS FROM EVENT MANAGER

SOURCE Service Control Manager
The routing and Remote Access service terminates with
service specific error 998


SOURCE REMOTE ACCESS
The current configured authentication provider failed to
load and intalize successfully. Invalid access to memory
location

DATA
0000: e6030000

Les
Tue Aug 05 09:23:53 CDT 2003

Hi Mayoor,

Give this article (and it's links) a go.

http://support.microsoft.com/default.aspx?scid=kb;[LN];320697

There is a link to 306802 in the article, which leads you through the DHCP
and DNS settings required on the SBS. I suspect this is the root cause, but
with both articles in hand I think you'll make some progress.

--
Les Connor
------------------
[SBS MVP]



"mayoor patel" <mayoorvpatel@yahoo.com> wrote in message
news:02f601c35786$7b9ce5a0$a101280a@phx.gbl...
> After harddrive problem got the server up by renameing
> system.sav to system in system/config directory.
>
> Have done few reinstall of everything using setting up
> your server ....
>
> most things working
>
> Cannot get Routing and remoteacess services to start tried
> removing and reconfigureing and here are some of the
> messages....
>
> "To support the relaying of DHCP messages from remote
> access client you must configure the properties of the
> DHCP relay agent with the address of your DHCP services"
>
> Error message:
> " Routing and Remote Acesss cannot verify that the default
> remote access policy matches the setting for the server.
> The following error acourd Invalid access to memory
> location (800703e6)"
>
> ERRORS FROM EVENT MANAGER
>
> SOURCE Service Control Manager
> The routing and Remote Access service terminates with
> service specific error 998
>
>
> SOURCE REMOTE ACCESS
> The current configured authentication provider failed to
> load and intalize successfully. Invalid access to memory
> location
>
> DATA
> 0000: e6030000