Re: RRAS Problem by Marina
Marina
Mon May 03 16:53:15 CDT 2004
Hi Richard,
You will need some adjusting.
I would set the subnetmask to 255.255.255.0
DNS on your nic should *only* point to your server-IP, so delete the other
2. In TCP/IP, Advanced, tab DNS, check the 'register in DNS' and 'add
primary suffix'. Tab WINS should have the 'enable netbios over TCP/IP'.
You better attach your dsl to the second nic. That way you will fully
benefit from ISA.
If you do, delete the gateway from the internal nic.
Setup your external nic something like this:
IP: 192.168.0.1
GW: 192.168.0.2
DNS: 10.0.0.220
The external nic should only have TCP/IP bound to it. Tab DNS should have
the 'check in DNS' and 'add primary suffix' UNchecked. Tab WINS should have
no address and be set to 'disable Netbios over TCP/IP'.
Set your router to LAN-IP 192.168.0.2.
Check the bindingorder and make sure the internal nic is on top.
Then in DHCP-server, Scope options: 003, 006 and 044 should point to your
server-IP. 015 should point to your local domainname (company.local), 046
should be 0x8.
Rerun ICW-wizard.
--
Regards,
Marina
Microsoft SBS-MVP
"Richard" <rcamp0222@aol.com> schreef in bericht
news:eoG$BfVMEHA.2244@tk2msftngp13.phx.gbl...
> I'm sorry I didn't post more. I'm panicking right now. Here is the nic
> from the server:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Intel 8255x-based PCI Ethernet
> Adapt
> r (10/100)
> Physical Address. . . . . . . . . : 00-06-5B-05-FC-E5
> DHCP Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 10.0.0.220
> Subnet Mask . . . . . . . . . . . : 255.0.0.0
> Default Gateway . . . . . . . . . : 10.0.0.1
> DNS Servers . . . . . . . . . . . : 10.0.0.220
> 205.152.133.254
> 205.152.0.5
> Primary WINS Server . . . . . . . : 10.0.0.220
>
> PP adapter RAS Server (Dial In) Interface:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
> Physical Address. . . . . . . . . : 00-53-45-00-00-00
> DHCP Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 10.0.1.5
> Subnet Mask . . . . . . . . . . . : 255.255.255.255
> Default Gateway . . . . . . . . . :
> DNS Servers . . . . . . . . . . . : 127.0.0.1
>
> There are two nics in the server, but one is disabled and has been for a
> long time. I'm connecting to the internet through a dsl connection,
however
> I can't even ping internal ip addresses such as 10.0.0.74. Thanks.
>
> Richard
>
> "Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in
message
> news:uBx8PVVMEHA.2532@TK2MSFTNGP10.phx.gbl...
> > Unfortunately most of us are not clearvoyant.
> > How many nics in your server? SBS 2000? How are you connecting to the
> > internet? Post the ipconfig/all from the server and one from a client.
> >
> > --
> > Regards,
> >
> > Marina
> > Microsoft SBS-MVP
> >
> > "Richard" <rcamp0222@aol.com> schreef in bericht
> > news:ug6TaeUMEHA.3348@TK2MSFTNGP09.phx.gbl...
> > > Group:
> > > I disabled routing and remote and then reenabled it, put the
> > configurations
> > > back like they were (I thought). Now I can't ping any address other
> than
> > my
> > > own much less get out to the Internet. Any suggessions as to what I
> > messed
> > > up are welcome. I can't ping the server's address from another
computer
> > > either. Thanks.
> > >
> > > Richard
> > >
> > >
> >
> >
>
>