Only one user can use VPN at a time

Any reason why only one remote user can log on using the
VPN at a time?

In Routing and Remote Access properties - IP tab shows
Static address pool from xxx.xxx.xxx.1 to xxx.xxx.xxx.254,
254 addresses.


Any help would be great.

Dan

Mark
Thu Aug 21 09:47:24 CDT 2003

Hi

Are you using an old broadband router? Earlier routers
only allowed 1 VPN pass through at a time, many have since
overcome this limitation. What model of router are you
using?


>-----Original Message-----
>Any reason why only one remote user can log on using the
>VPN at a time?
>
>In Routing and Remote Access properties - IP tab shows
>Static address pool from xxx.xxx.xxx.1 to
xxx.xxx.xxx.254,
>254 addresses.
>
>
>Any help would be great.
>
>Dan
>.
>

Dan
Thu Aug 21 09:57:36 CDT 2003

Caymen. OK it's working now. I think the problem was at
the remote site where they are using wireless and it was
just a coincidence that one would log on an knock the
other off. I see two connections now.

Dan
>-----Original Message-----
>Hi
>
>Are you using an old broadband router? Earlier routers
>only allowed 1 VPN pass through at a time, many have
since
>overcome this limitation. What model of router are you
>using?
>
>
>>-----Original Message-----
>>Any reason why only one remote user can log on using the
>>VPN at a time?
>>
>>In Routing and Remote Access properties - IP tab shows
>>Static address pool from xxx.xxx.xxx.1 to
>xxx.xxx.xxx.254,
>>254 addresses.
>>
>>
>>Any help would be great.
>>
>>Dan
>>.
>>
>.
>

Rick
Thu Aug 21 11:27:56 CDT 2003

What model/brand router do you recommend? I've been trying to purchase a
router/firewall hardware device to put in front of SBS as another layer of
protection but haven't been successful on which one works the best.

Rick in the Midwest

"Mark Barnes" <mark@spam-me-not.advanced-systems.co.uk> wrote in message
news:00dd01c367f3$22335850$a101280a@phx.gbl...
> Hi
>
> Are you using an old broadband router? Earlier routers
> only allowed 1 VPN pass through at a time, many have since
> overcome this limitation. What model of router are you
> using?
>
>
> >-----Original Message-----
> >Any reason why only one remote user can log on using the
> >VPN at a time?
> >
> >In Routing and Remote Access properties - IP tab shows
> >Static address pool from xxx.xxx.xxx.1 to
> xxx.xxx.xxx.254,
> >254 addresses.
> >
> >
> >Any help would be great.
> >
> >Dan
> >.
> >