ISAFP1

TheMSsForum.com: The Microsoft Software Forum

The MSS Forum ‹ smallbiz
- Archive
  - Biz
  - MCSE
  - CRM
  - Drivers
  - Framework
  - ADO
  - ASP
  - Compact
  - Forms
  - Dotnet
  - C#
  - VB
  - FontpageGen
  - Excel
  - WorkSheet
  - Exchange
  - Setup
  - Fox
  - Fontpage
  - ASP
  - IIS
  - Entourage
  - Money
  - Messanger
  - PocketPC
  - Powerpoint
  - Project
  - Publisher
  - Excel
  - VB
  - Security
  - Portal
  - Services
  - SQLServerDev
  - SVCS
  - SQLServer
  - VB
  - VC
  - MFC
  - ExcelGen

- Previous
  - 1
    - File server & CAL's Ok, The following mistake was made due to partially poor planning and necessity. We required a replacement file server for our existing SBServer. What we originally planned was to install SBS on the new system and then migrate everything to it and then use it as our primary (retiring the old SBS). Well as you can imagine there were problems. I had not realized was that two SBServers could not exist on the same network, this has caused us considerable pain. The server will allow itself to exist but it can not be promoted to a secondary it can also not apparently allow more than 10 users to connect to it, this presents a major issue as we do have more than 10 people at any one time will need to connected to it. We have the correct number of CAL's for the existing SBS, but the new fileserver will not allow more than 10 to connect to it (It will also not allow us to add licenses as it is not a full-fledged SBS yet). I did find this article (305138) on the knowledge base but it applies to SP2, and not SP4 so I am unable to apply the hot fix. (Which I assume has been built into SP3/4 anyway) Suggestions? Tag: ISAFP1 Tag: 120303
  - 2
    - Finding Domain Controller I have a freshly set up sbs that I am still working the kinks out of. I keep having DC problems. In the event viewer of my xp clients its saying Could Not Find Domain Controller or Domain Controller Doesn't Exist. I have enabled netbios over tcp/ip and that didn't help. The strange thing is I am able to get to mapped drives, email, printers, etc but sometimes it prompts me for a username and password after I have logged in. When I put the username and password that I logged in with it says it has already tried it. Please Help!!!! thnaks Tag: ISAFP1 Tag: 120302
  - 3
    - Using SBS2K as an Email Host OK. I know how good all of you are on here, so here is the scenario. The agency I have just started with use to run a P2P networked which I have upgraded to SBS2K. Their email provider is based in CA (we are in FL) and continually go down. As of now, we use them as the POP3 and the local ISP as the SMTP. I would like to bring everything in-house and use the SBS as the email host for POP and SMTP and get rid of the internet mail side. Not being a "classically trainined" computer person (my masters is in Public Admin) I have an idea of how to do this but nothing clear in my head, and I don't want to lose it. Is it a matter of changing the Server to an SMTP type and bringing everyhitng in house that way? Guidabce would be appreictaed? TIA John C. Harris, MPA Tag: ISAFP1 Tag: 120295
  - 4
    - Share CD-ROM on SBS2000 over internet? I would like to use the CD-ROM drive in the SBS2000 server while I am not in the office (ie: when I VPN to the server over the internet, etc.). Is there a way to do this, and how would I get access to it over the VPN connection? TIA Torrey Lauer Modern Travel Services www.moderntravel.net MKE Tag: ISAFP1 Tag: 120286
  - 5
    - Computer lockups Sorry for repost but still dont know what the deal is Still having problems , help. The past couple of days I am having a couple of xp and 2000 computers are experencing pauses during working. All these computers are CAD machies and during the course of the day while working in acad(as this is the most used program on the computer) they will be working and the cursor will lock up for 5-20 sec and then unfreeze, doing this at random throughtout the day. All computers are updated completely. It started doing this about two weeks ago before that everything worked smoothly. Also am not getting any relative event logs. What might cause this.? or what steps do u recommend that I should take? Tag: ISAFP1 Tag: 120281
  - 6
    - ISA Server Thanks. I will give it a try next time I am at the client. Tag: ISAFP1 Tag: 120276
  - 7
    - 65 seccond timeout when opening a network file On an SBS 2000 network, the users experience a delay of 65 secconds before the file they selected opens.After the first file is opened, subsequent files open instantly.If you do not access the network for about 30 mins, the delay returns for the first file you open. Tag: ISAFP1 Tag: 120275
  - 8
    - Report Availability from SBS Hey all; This is probably really easy for some of you but bare with me. I am running SBS2K and would like a report that tells me when a specific user logged in and logged out. I know in the Resource Kit there is a report that tells me when they LAST logged in, but what I need is one that tells me the user name, the initial login time, and the last log off time. Is this possible or am I wishing for too much here? Thanks in Advance Tag: ISAFP1 Tag: 120268
  - 9
    - Routing and RemotAccess After harddrive problem got the server up by renameing system.sav to system in system/config directory. Have done few reinstall of everything using setting up your server .... most things working Cannot get Routing and remoteacess services to start tried removing and reconfigureing and here are some of the messages.... "To support the relaying of DHCP messages from remote access client you must configure the properties of the DHCP relay agent with the address of your DHCP services" Error message: " Routing and Remote Acesss cannot verify that the default remote access policy matches the setting for the server. The following error acourd Invalid access to memory location (800703e6)" ERRORS FROM EVENT MANAGER SOURCE Service Control Manager The routing and Remote Access service terminates with service specific error 998 SOURCE REMOTE ACCESS The current configured authentication provider failed to load and intalize successfully. Invalid access to memory location DATA 0000: e6030000 Tag: ISAFP1 Tag: 120255
  - 10
    - SQL SP3 and HfNetchkLt/Pro I have the latest and greatest free version of HfNetChkPro (4.0.76.4) installed on a workstation. Can anyone tell me whether the free version will allow you to push down SQL service packs ande/or hotfixes to the SBS server? Or do I need to get the paid version to do this? -kw Tag: ISAFP1 Tag: 120227
  - 11
    - Event ID 1000, 1001 CAN ANY HELP !!?#? Userenv, Event ID: 1000 Windows cannot access the registry information \\server- name\sysvol\server.local\Policies\{xxx} \Machine\Registry.pol with (1231). SceCli, Event ID: 1001 Security policy cannot be propaged. Cannot access the template. Error=3. Userenv, Event ID: 1000 The group policy client-side extension security was passed flags (17) and returned a failure status code of (3). Thanks. John Mac Tag: ISAFP1 Tag: 120216
  - 12
    - ISA server I have a client running SBS2k and ISA with two NICs in the server. The ISA work fine for everyone except for 1 or two sites. I have one user that must access a site and it fails throught the proxy server. What do I need to do to let this user have direct Internet access? Currently, if I turn off proxy and just point him to the internal address of the SBS system as default gateway, it doesn't work. I just want this one user to be able to bypass the ISA server. Thanks in advance for any help! Tag: ISAFP1 Tag: 120212
  - 13
    - NNTP Newsfeed I have set up a peer newsfeed via Exchange system manager on SBS, and I actually tested it with this newsgroup. I input all details and in my public folder structure, Internet Newsgroups appears once the feed has been activated. It drills down the tree to the correct newsgroup but there is nothing in there and I get an ndr report in my inbox if I try and post anything to it. How do I get it so that it pulls down messages from this newsgroup into my newsfeed, so that it appears in the public folders? Tommy Addison Tag: ISAFP1 Tag: 120208
  - 14
    - TS behind SBS 2000, anyone successful? Has anyone setup a TS server behind the SBS 2000? I would want to run the server in Application mode and have the licensing on the SBS 2000 box. Any thoughts would be great. If you saw my other post I hav the answer already... Peter V Tag: ISAFP1 Tag: 120204
  - 15
    - WINS 1 - What is WINS? 2 - How do i know if it is turned on in my server? Cheers M Tag: ISAFP1 Tag: 120203
  - 16
    - Is there any way to add terminal services licenses to SBS? I have a need now to use regular terminal services sessions with my SBS installation, however I don't see how you would add licenses one you buy them given the way SBS handles licensing... Any ideas? Eric Lizotte Tag: ISAFP1 Tag: 120202
  - 17
    - Auto Enrollment Error Here's an odd one... I'm running a Windows 2000 SBS Server. It has 3 segments and 4 NICs in the server (3 internal and 1 external) Internal 192.168.0.100 Internal 192.168.1.100 Internal 192.168.2.100 External xxx.xxx.xxx.xxx I recently decided to reinstall Windows XP on a users PC which was running very slowly, taking ages to log in and occasionally crashing. It could was also getting the following errors: Event Type: Error Event Source: AutoEnrollment Event Category: None Event ID: 15 Date: 31/07/2003 Time: 14:57:55 User: N/A Computer: SEAN04 Description: Automatic certificate enrollment for local system failed to contact the active directory (0x8007054b). The specified domain either does not exist or could not be contacted. Enrollment will not be performed. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Userenv Event Category: None Event ID: 1054 Date: 31/07/2003 Time: 14:56:49 User: NT AUTHORITY\SYSTEM Computer: SEAN04 Description: Windows cannot obtain the domain controller name for your computer network. (The specified domain either does not exist or could not be contacted. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. The users machine was on segment 2 (192.168.2.100), but I brought it back to my office on segment 0 (192.168.0.100) to reinstall the o/s and software. It worked perfectly and was much faster on startup, so I returned the machine to segment 2 only to start it up and get the same errors again! it does seem to be running ok though in general - just wondered if anyone could shed any light on why this might be happening. The only advice I've received so far was to throttle back the NIC in the PC to 100Mbs Half Duplex rather than auto detect, but this made no difference. Thanks in advance Jason Tag: ISAFP1 Tag: 120201
  - 18
    - Event ID 1008 Every Second We are getting an Event Log error of 1008 about every 1-5 seconds. Type: Error User: N/A Computer: SERVER Source: Perflib Cat: None Event ID: 1008 The Open Procedure for service "ISWHTTPD" in DLL "C:\WINNT\system32\iswhttper.dll"' failed. Performance data for this service will not be available. Status code returned is data DWORD 0. How can we resolve this on our Small Business server. Thanks Tag: ISAFP1 Tag: 120198
  - 19
    - naming a tape silly question i know but how on earth do i name a tape in ArcServer workgroup. I have tried all the usual highlight tape and right click but i don't seem to see any option to name the tape. This is quite crucial in the sence that we want to restore by session. Thanks to all who reply Tag: ISAFP1 Tag: 120193
  - 20
    - Terminal Services???? Can a SBS 2000 server be a TS licensing server for a Windows 2003 server running in application mode? Any links or thoughts would be helpful. Peter V Tag: ISAFP1 Tag: 120192
  - 21
    - how secure is my ip setup for internet connection currently I have the following setup in place: sbserver with 1 internal nic and 1 external nic. netgear dg814 ADSL router connected to server only via external nic. internal ip range: 192.168.16.xx server: 192.168.16.2 external nic: static internet ip xxx.xxx.xxx.70(assigned by isp) router: static internet ip xxx.xxx.xxx.69(assigned by isp) Under the internet connection wizard I have allowed isa packet filtering allowing access to: mail server web server web based mail server pop3 ftp SB server box is only server in office and is the file and mail server and therefore contains all critical information for business. everything is working well including internet sharing via proxy server and outlook web access, but I am concerned that the server is open to internet security threats. I have only the standard ISA filters inplace that the internet connection wizard sets up by default. Any advice as to the security of this setup would be greatly apreciated. Thank you Tag: ISAFP1 Tag: 120191
  - 22
    - DLT 4000 20/40 question We have been using a DLT 20/40 drive for a while now and resently added an addtional 20/40 to boost the capacity of the fulll backup because it takes 2 tapes to do it. I am wondering if I am to get a DLT 35/70 or 40/80. The DLT IV tapes that I have can be reformated to allow the greater size drives correct? Or would it be better to just get a library.. I Tag: ISAFP1 Tag: 120188
  - 23
    - dns Hi all, I have a problem connectting to aol using their swf (aol 8.0 plus). if i try to logon it say "unable to connect to the server." but if i clear my dns server cache it will go thru.if i logoff and connect after 5 min i will get the same error msg "unable to connect to the server." thanks rc Tag: ISAFP1 Tag: 120186
  - 24
    - email stuck in queue between exchange 2000 servers We have an (apparently) working exchange 2000 server to replace our SBS. We can move email accounts from the SBS to the new server with AD users & computers. However test email sent from an account on the new server to an account on the SBS just sit in queue on the SBS, with a bounce message. I'm sure this is a dumb question, but can someone tell me what is preventing delivery? Tag: ISAFP1 Tag: 120178
  - 25
    - Imaging SBS onto removable storage I was thinking about imaging an sbs server C: drive onto a DVD disk using ghost of something similar. I thought it would have be good to use something like an external DVD writer as I could use the same device on a number of sites and the only cost per site would be one DVD disk. The device I originally had in mind was an HP external DVD writer that connects via USB 2 or IEEE1394 - but then it occurred to me that to take the image I must be in DOS and USB, etc would not be available. Does anyone else do this sort of thing? What hardware is used? Paul Tag: ISAFP1 Tag: 120174
- Next
  - 1
    - Exchange Drive Size Problems Currently we have a partition on the server that houses out exchange server. This drive is 15gig in size. However I am now finding that after a weeks worth of logs the drive is filled up and exhange shuts down. I m wondering what is the easiest way to decrease the size of the exchange server folder? The backup is exhange aware so the logs are getting flushed. But there are only about 500 meg so it realy does not provide that much space to provide any sort of cushion. How can I solve this. Eddie Tag: ISAFP1 Tag: 120173
  - 2
    - SP4 and VPN broken Hello, Fresh install of SBS2K and SBS SP1. Problem: When VPN is established from outside the network, I am unable to view computers in the SBS network or any of it's resources..... but the VPN connection is established. It used to work after SBS SP1 but before Win2K SP4, as far as I can tell.... Anyone else get this? Any ideas or clues? Thanks, Tom. Tag: ISAFP1 Tag: 120158
  - 3
    - Cal license floppy does not work with LS-120 drive When I try and add a 5 clent license pack for SBS 2000 I run it from the floppy as required but after the I agree screen I get a message stating that the driver is either write protected or damaged (of which it is neither) and that this disk cannot be used on a ls-120 drive. This is the second sdisk I have tried does anyone know how to get around this problem? Any help would be great. The system is Windows 2000 sp4 Thanks Rob Tag: ISAFP1 Tag: 120156
  - 4
    - Restricting software client workstations can run? Hi, I've been asked an interesting question by one of my customers. How can I prevent client workstations connecting to SBS from running certain programs on them, the workstations are XP professional. Or to put it another way can I specify a list of programs that users CAN run and restrict all others. I would have thought I could do this through a global policy but I'm not sure how? Keith Tag: ISAFP1 Tag: 120145
  - 5
    - Backup solutions, why not...? I gather that you guys recommend DLT tape solutions for=20 backup. Well, we need a new tape backup solution due to=20 the demise of Onstream. The problem is that I know what=20 my boss's reaction will be when I tell him the cost of a=20 DLT drive (=A3900 or more), it'll be short, rude, and=20 hazardous to my health. Why therefore do you guys not=20 recommend more amicably priced solutions such as: DAT, AIT, Travan, DDS. If someone could give me a reason for each why it is not=20 desirable, I would be really grateful. If one of them is=20 desirable, even better. Thanks in advance, Colin. Tag: ISAFP1 Tag: 120141
  - 6
    - SBS2000 CALs setup failed When I try to add licenses disk on my new SBS2000 server, after 1 minute I get the following message : setup.exe - Application error The application failed to initialize properly (0xc0000006). Click on OK to terminate the application. I have try with 3 different Client Access Disk, same problem. I have replace the floppy reader, same ploblem. Server is a Proliant ml350 and Floppy reader is NOT a LS- 120. Could you help me to registering and use this wonderfull product ? Tag: ISAFP1 Tag: 120140
  - 7
    - TEST MESSAGE---PLEASE IGNORE Tag: ISAFP1 Tag: 120133
  - 8
    - Symantec Corp Edtion and Veritas To the BackupExec Users: I am noticing that since I installed Symantec's Corp Edition product, my backups have slowed down. Is there a setting or an exlusion that you recomend with Antivirus and Backup Exec? I remember in the old days with McAfee on Novell where you excluded scanning outgoing files and the backups went a lot faster. Thanks JohnJ Tag: ISAFP1 Tag: 120130
  - 9
    - Microsoft Shared Fax Install Fails I have a Win2k SBS server and am trying to install Shared Fax. When performing the install directly from Disk 2\fax\server\setup.exe the progress bar gets to about 80% then starts to uninstall. ** This has been running on this server before. ** I have rebuilt it, now it will not install. Errors Reported in the event log. Product: Microsoft Shared Fax -- Installation operation failed. The description for Event ID ( 32083 ) in Source ( Microsoft Shared Fax ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Microsoft Modem Device Provider. The description for Event ID ( 32082 ) in Source ( Microsoft Shared Fax ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Microsoft Modem Device Provider. Tag: ISAFP1 Tag: 120129
  - 10
    - ISA & SUN JRE 1.4 Hi, Maybe someone knows the solution to this. A pc needs to have the SUN JRE installed. Since this jre has been installed, ISA prompts for username & password whenever you browse JAVA enabled pages. How can I prevent this? Best regards, Dennis. Tag: ISAFP1 Tag: 120127
  - 11
    - Can't Ping the server from the outside I have a new SBS w/2 nic setup,and ran the internet connection wizard. Everything seemed to be working fine until I tried remote admin. Could not ping the server. I was wondering if the DSL Pac Bell modem would be the issue. I don't have any experience with the PacBell modem. Workstations cannot ping out or get mail using Outlook express. Any help would be great. Tag: ISAFP1 Tag: 120124
  - 12
    - DNS records for .local setup My server is server.workgroup.domain.local. My website is domin.com. Public external DNS servers host my www record that point to my external web host's site and a MX record that points to my SBS Exchange server. My users tell me that certain people from certain domains can't send them emails successfully. How do my DNS records and zones need to be configured to allow external email servers to find and resolve my mail server? Currently I have a forward lookup zone, workgroup.domain.local that has the SOA and host records for that zone. There is also a reverse lookup zone for my subnet. Do I need to add a forward lookup zone for domain.com and add host and MX records for my mail (SBS) server? Thanks :) Tag: ISAFP1 Tag: 120119
  - 13
    - Windows 98 Won't update via Windows Update through ISA Hello, An odd problem I've usually check use http through proxy setting in ie and windows update works great in Windows 98. But now I have two win98 pcs that won't update. All others ok. Both are using the isa server proxy, port 8080, standard stuff. What should I look for? JohnJ Tag: ISAFP1 Tag: 120117
  - 14
    - static I.P. and mailserver settings I just ordered a static i.p. for our SBS2000 machine. Now I am wondering, once we have the static i.p., and the MX record pointing to it, how do I set up Exchange to do the same job our ISP (POP3 mailserver) is presently doing ? Is there an "idiot's guide" to setting the machine up for that ? Thanks in advance. Chris Tag: ISAFP1 Tag: 120104
  - 15
    - App Launcher ADODB Stream Write to file failed. THis is the error I get when I login to my TS. I have Outlook installed as a test. After I click on this error, everything works great. I thought that the user may need to be able to write to the c:\program fioles\applauncher folder, so I changed the permissions to allow modify and write to no avail. Any suggestions? Tag: ISAFP1 Tag: 120103
  - 16
    - Archiving Data Files Our users like to keep files that date back to Adam&Eve era. (e.g. *.doc *.xls) So what i need to do is archive them to CD. What is the best way to pickup files with a "Accessed Range" date e.g. 01-07-01 to 01-07-02. I tried using the search facility to pick these files up, but no joy. Any other bright ideas? Tag: ISAFP1 Tag: 120099
  - 17
    - DCOM and EventID 10009 I've recently replaced a server and I'm now seeing complaints from a DCOM process claiming that it cannot contact the old server using any configured protocols and logging event ID 10009. This is being logged on the internal SBS server (not the replacement machine). Source is DCOM, category None, Event ID 10009, User is NT Authority\System, message cut-n-pasted below; DCOM was unable to communicate with the computer anubis using any of the configured protocols. I've had a go at finding and fixing this in the past which ultimately proved unsuccessful, but did eliminate a few lurking references to the old server name. These events are occuring once per minute for serveral hours and then stop for an seeminly abitrary period of time and then start again. (Of course they usually stop a few minutes after I get a fraction of time to look at the problem). I used filemon from sysinternals, and the process that *appears* to be related is emsmta.exe, access to emsmta is bracketting the entry that looks to be writing the event log. So Exchange is my most likely culprit, I've trawled through all the configuration/property panels that I can think of and can find no explicit reference to the old server name. It's causing any operational issues (that I know of) but it is filling the system event log and hence making spot real problems difficult. So, does anyone know of any trying to trap this DCOM call to see which process is invoking it ? Regards, Alan. Tag: ISAFP1 Tag: 120097
  - 18
    - TS logon and policies Which policy disallows ordinary users from logging on to a TS on SBS with TS in admin mode? pls. I've checked local, domain & domain controller security policies and cannot see why an ordinary user IS able to logon to one SBS but is not (as expected) able to logon to another. TIA Tag: ISAFP1 Tag: 120093
  - 19
    - Instant Messaging I have finally implimented the instant messaging option in exchange in a new SBS installation. I am using the 4.7 messenger on the clients. I am having serious speed issues with it running. Everything else exchange related is running fine, adding a new contact in Messenger takes about 1 minute in which messenger appears to be locked up. When you click on somebody to send them a message it takes 5-10 seconds before you can type anything to them. Any ideas on how I can improve the performance of this feature? The server is running SBS2000 with the corresponding exchange. all the clients are XP pro. Thanks. Tag: ISAFP1 Tag: 120081
  - 20
    - SBS 2003 OWA Premium I just installed SBS2003RC1 and most everything works great. Really like the new features. Only issue I can tell so far is when users log into the server and attempt to access OWA via Premium Client many of the features don't work. For example, when OWA Premium opens all the email is shown in the Inbox and a right-click shows a menu as expected, but when you choose open from the menu or double-click nothing happens. Is is just RC1 or am I missing something? All in all SBS2003 is a MAJOR improvement in look and feel. The intranet capabilities are awesome. Can't wait for the final release. Thanks! Tag: ISAFP1 Tag: 120068
  - 21
    - easy money Yo,this aint phony. I am an 18 year old DJ that needs loot. Yo, im tellin ya...you read this already about that fast monry making shit. Well, to tell you the truth it works. The figures are a little bit off, but i made money. I got 15 bucks the first week, then this week i made $45. That is frickin $60 bucks doin nuttin. Well, soon im gonna get some new tables. EVERYONE try this. Im spreadin the wealth. AT LEAST TRY IT. Im a ghetto ass who lives in Chicago with no income what so ever. IM LIVING PROOF. LATER. ========================================================== (this shit is long, but it will pay off, on the real!===========================================================A little while back, I was browsing through newsgroups, just like you are now, and came across an article similar to this that said you could make thousands of dollars within weeks with only an initial investment of $6.00! So I thought," Yeah, right, this must be a scam", but like most of us, I was curious, so I kept reading. Anyway, it said that you send $1.00 to each of the 6 names and address stated in the article. You then place your own name and address in the bottom of the list at #6, and post the article in at least 200 newsgroups. (There are thousands) No catch, that was it. So after thinking it over, and talking to a few people first, I thought about trying it. I figured what have I got to lose except 6 stamps and $6.00, right? Like most of us I was a little skeptical and a little worried about the legal aspects of it all. So I checked it out with the U.S. Post Office (1-800-725-2161) and they confirmed that it is indeed legal! Then I invested the measly $6.00. Well GUESS WHAT!!... within 7 days, I started getting money in the mail! I was shocked! I figured it would end soon, but the money just kept coming in. In my first week, I made about $25.00. By the end of the second week I had made a total of over $1,000.00! In the third week I had over $10,000.00 and it's still growing. This is now my fourth week and I have made a total of just over $42,000.00 and it's still coming in rapidly. It's certainly worth $6.00, and 6 stamps, I have spent more than that on the lottery!! Let me tell you how this works and most importantly, why it works....also, make sure you print a copy of this article NOW, so you can get the information off of it as you need it. STEP 1: Get 6 separate pieces of paper and write the following on each piece of paper "PLEASE PUT ME ON YOUR MAILING LIST." Now get 6 US $1.00 bills and place ONE inside EACH of the 6 pieces of paper so the bill will not be seen through the envelope to prevent thievery. Next, place one paper in each of the 6 envelopes and seal them. You should now have 6 sealed envelopes, each with a piece of paper stating the above phrase, your name and address, and a $1.00 bill. What you are doing is creating a service by this. THIS IS ABSOLUTELY LEGAL! Mail the 6 envelopes to the following addresses: #1) A. Montalvo 711 Park Ave Lakewood, NJ 08701 #2) RANDY PAGUIO 40029 CANDY APPLE WAY MURRIETA CA.92562 #3) Ethan Camba 832 Monterey Rd. Glendale Ca. 91206 #4)Jovim Ventura 5818 N Christiana Chicago,IL 60659 #5)G. Wheeler 44 West River St. Upton , MA 01568 #6) Carlos Mendez 2115 GUILFORD RD 304 HYATTSVILLE, MD 20783 STEP 2: Now take the #1 name off the list that you see above, move the other names up (6 becomes5, 5 becomes 4, etc...) and add YOUR Name as number 6 on the list. STEP 3: Change anything you need to, but try to keep this article as close to original as possible. If you do not live in the us or there is a foreign address you must put a international stamp on your envelopes. Now, post your amended article to at least 200 newsgroups. (I think there are close to 24,000 groups) All you need is 200, but remember, the more you post, the more money you make!---DIRECTIONS -----HOW TO POST TO NEWSGROUPS------------ Step 1) You do not need to re-type this entire letter to do your own posting. Simply put your cursor at the beginning of this letter and drag your cursor to the bottom of this letter, and select 'copy' from the edit menu. This will copy the entire letter into the computers memory. Step 2) Open a blank 'notepad' file and place your cursor at the top of the blank page. From the 'edit' menu select 'paste'. This will paste a copy of the letter into notepad so that you can add your name to the list. Step 3) Save your new notepad file as a ..txt file. If you want to do your postings in different sittings, you'll always have this file to go back to. Step 4) Use Netscape or Internet explorer and try searching for various newsgroups (on-line forums, message boards, chat sites, discussions.) Step 5) Visit these message boards and post this article as a new message by highlighting the text of this letter and selecting paste from the edit menu. Fill in the Subject, this will be the header that everyone sees as they scroll through the list of postings in a particular group, click the post message button. You're done with your first one! Congratulations...THAT'S IT! All you have to do is jump to different newsgroupes and post away, after you get the hang of it, it will take about 30 seconds for each newsgroup! **REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY YOU WILL MAKE!! BUT YOU HAVE TO POST A MINIMUM OF 200** That's it! You will begin receiving money from around the world within days! You may eventually want to rent a P.O.Box due to the large amount of mail you will receive. If you wish to stay anonymous, you can invent a name to use, as long as the postman will deliver it. **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY part: Out of 200 postings, say I receive only 5 replies (a very low example). So then I made $5.00 with my name at #6 on the letter. Now, each of the 5 persons who just sent me $1.00 make the MINIMUM 200 postings, each with my name at #5 and only 5 persons respond to each of the original 5, that is another $25.00 for me, now those 25 each make 200 MINIMUM posts with my name at #4 and only 5 replies each, I will bring in an additional $125.00! Now, those 125 persons turn around and post the MINIMUM 200 with my name at #3 and only receive 5 replies each, I will make an additional $626.00! OK, now here is the fun part, each of those 625 persons post a MINIMUM 200 letters with my name at #2 and they each only receive 5 replies, that just made me $3,125.00!!! Those 3,125 persons will all deliver this message to 200 newsgroups with my name at #1 and if still 5 persons per 200 newsgroups react I will receive $15,625,00! With a original investment of only $6.00! AMAZING! When your name is no longer on the list, you just take the latest posting in the newsgroups, and send out another $6.00 to names on the list, putting your name at number 6 again. And start posting again. The thing to remember is, do you realize that thousands of people all over the world are joining the internet and reading these articles everyday, JUST LIKE YOU are now!! So can you afford $6.00 and see if it really works?? I think so... People have said, "what if the plan is played out and no one sends you the money? So what! What are the chances of that happening when there are tons of new honest users and new honest people who are joining the internet and newsgroups everyday and are willing to give it a try? Estimates are at 20,000 to 50,000 new users, every day, with thousands of those joining the actual internet. Remember, play FAIRLY please! This ensures a huge circle of wealth that grows with the internet audience!!! Everyone benefits!!! Remember to send the six envelopes to the above addresses, in order to create the legal service. At first I was to scared to try this but I researched it and its totally legal. If you send the six envelopes out, you create a service, a legal service. The Internet audience is expanding all the time. The audience is like a equity stock on the stock market, continuously going up. Tag: ISAFP1 Tag: 120043
  - 22
    - SBS2000 Exchange memory leak Hello, I currently am working on a SBS 2000 system with the default exchange server 2000 installed. It recently developed a memory leak on the store.exe and will run out of availble memory in about 3-4 days. I recently patched exchange server 2000 with SP3 for exchange, hoping it would fix it. However it has not. I currently have SP4 for Windows 2000, and all of the other updates are installed as well. Are there any other patches or know issues with the store.exe that might help me to resolve this issue? Please help Thanks in Advance Tag: ISAFP1 Tag: 120041
  - 23
    - sbs2000 - roll back Is there any way of rolling back sbs2000 to a previous working configuration. We had somebody in working on our systems who changed a few bits in ISA - now if we try to use OWA all we get is error 12206 - Proxy chain loop. Any help greatfully received. Tag: ISAFP1 Tag: 120039
  - 24
    - SBS 2003 When is the expected release of SBS 2003? Lakshman. Tag: ISAFP1 Tag: 120018
  - 25
    - SBS CALs and Server 2003 Anyone know if SBS2000 CALs will be recognized by Server 2003 - or how Microsoft plans to "upgrade" the CALS for SBS so that we can run Server 2003 Active Directory with SBS? Tag: ISAFP1 Tag: 120016

Hi
I was wondering if someone could give me some advice on
suggestions to secure SBS2000.

ISAFP1ur.exe does not remove some of the virtual
directories that urlscan2.5 does.

Can anyone suggest what I need to install and the order I
do it.

ISAFP1 > urlscan2.5 > isafp1ur.exe

Thanks

Top