Exchange distribution problem + OWA access lost - PLEASE PLEASE HELP
Hi,
Please believe i do do my own research all the time but i really am
stuck and am getting depressed!!!
In a nut shell, We have and 1 SBS 2000 server using exchange and ISA
+ ADSL with static IP, this basically connects up to and ISP's POP box
(I know it's not the right way)and downloads the mail.
Now this setup has worked pretty well for the last few years but on
friday it went a bit wrong, we were trying to work out why a specific
SSL site would not work over our proxy thus were trying new rules and
playing with the SSL listeners etc. After all this it became evident
there was a small compat. issue between the site and ISA.
Anyhow we put everything back the way it was........and guess what is
don't work. Now exchange does send out all SMTP with no probs and the
POP connector brings down the mail also however we have no idea in
hell where they now go, have checked all the que etc. + the POP
inforward folders + all relevant services.
On top of that I can no longer access OWA even from the server - just
keep getting 403 forbidden. Now i cant help thinking that it must be
a rule or policy however i've set ISA to allow all traffic on all
ports (or so i think i have) but still nothing.
Please help I REALLY AM ON THE EDGE!!!
All the best
yus Tag: OT: Colier copiers / Document Systems` Tag: 133012
Help getting buried in spam
Please help I am getting killed with spam, does anyone know of a good
program to work in SBS2000 and soon SBS2003 using outlook and exchange. out
of 150 emails only 4 were not spam, something has to be done to stop this. Tag: OT: Colier copiers / Document Systems` Tag: 133009
Linksys router
This may be horribly off topic for this newsgroup, but I can't find any
more likely place to ask.
I've got a p-to-p LAN in my home (2 machines) that are connected through
a Linksys BEFW11S4 broadband router operating in Gateway mode. One
machine is cabled, the other is connected via wireless adapter. The
machines are on static IP's, and I have experimented with turning the
router DHCP enabled and disabled.
Lately, it seems I'm having to reset the router at a random time
everyday whether DHCP is enabled or not. I have to reset it because it
stops carrying the network -- ping <gateway address> results in "host
not found", and neither machine can access the Internet or ping the DSL
modem.
Anybody know anything about this? I've upgraded firmware and tinkered,
but I'm just not tinkering with the right thing.
Thanks
Mark Tag: OT: Colier copiers / Document Systems` Tag: 133005
Outlook 2000 does not load on client download
When I perform my client setup on a Windows 95 laptop all
the applications download with the exception of Outlook
2000. Outlook installs 50% and then stops.
Any suggestions Tag: OT: Colier copiers / Document Systems` Tag: 133003
Compatiblity SBS 2000/2003
Has anyone had or know of any issues using HP SureStore
external tape drives with SBS2000? SBS2003? What
internal SCSI adapter would you recommend?
Thanks,
Larry Tag: OT: Colier copiers / Document Systems` Tag: 133000
Setting up OWA
I'm new to Exchange and need to be able to configure Outlook Web Access on a
SBS 2000 system as soon as possible.
The domain is configured presently at domainname.local.
I have read through the documentation and know that to change that to the
public domain I need to go through the Internet wizard in the To do list.
And that will be done when the server is rolled out.
What I don't know how to do is to set up OWA. Exchange is up and working.
ISA is installed. But how do I configure the OWA component.
I've checked and the Pop3 Mail Connector is installed.
Are there are any knowledge base articles that step someone through
installing and configuring the OWA?
Thanks Tag: OT: Colier copiers / Document Systems` Tag: 132993
Color Depth on Terminal Services Clients
We have an office that connects to the SBS 2000 server via
terminal services. Although we have set the client
software to run in 16 bits/65,000 colors, when we view
image files (jpg, bmp)within the client, they drop to 16
colors. Are there settings on the server that limit client
settings and if so, how can we change that setting. These
are medical scans.
Thanks in advance
Scott Tag: OT: Colier copiers / Document Systems` Tag: 132983
backing up exchange
Hi
i am using exchange 2000 and sbs 2000.
if i want to backup exchange is the following correct?
1. go to a command prompt
2. type "copy con c:\exback.bat ntbackup backup ds
(server name) is (server name) /t normal /l c:\exback.log
3. press ctrl z
4. at 00:00 /every:m,t,w,th,f c:\exback.bat (enter)
How do i change this to backup to a file on the server?
I want it to backup to a file because i have not got a
backup solution in place other than to backup to a file
and then burn the file to CD. We are looking at this
issue.
How do i change this to include hardware compression on?
Why would i need hardware compression turned on?
Does this stop the services for exchange so the files do
not appear locked?
How do i change the time if i want it to occur at 9pm
each night? Is it 09:00 instead of 00:00? If i want it
to backup at 2pm is it 14:00?
thanks again Tag: OT: Colier copiers / Document Systems` Tag: 132981
POP 3
I have several users who like to recieve their email on their laptops as
well as there workstation. So we have it set up that they receive their
Exchange on their workstation and then use POP3 to connect to exchange on
the laptop. So I have it set up to keep all messages on the server when
receiving email using the POP3 connector. This has been working fine until
I upgraded Exchange to the 'POST SP3 UPDATE'. Now my POP3 user receives the
message "task send / receiving report error 0x80042104 'Your email server
does not have the features required to allow messages to be left on the
server'" Does anyone know if there is an option that I need to change back
to allow this again? Tag: OT: Colier copiers / Document Systems` Tag: 132980
Event viewer Application log
Sorry I have asked this before, but I had a system crash on my client
machine.
The application log in event viewer does not show any data, but it states
2,000 entries. How do I get to view it?
Thanks, Denis Tag: OT: Colier copiers / Document Systems` Tag: 132978
Internet Gateway
We have a SBS2000 server with a permanent ADSL connection, no problems and
all is alright. The boss wants to create an Internet gateway to use
MIMESweeper for Mail and Web to scan all incoming and outgoing traffic. I
thought I could install a second server just to do this and use Windows 2003
server, could anyone offer any tips on how to setup a gateway, the gateway
server would have two network cards, one being connected to the SBS2000
server and the other to the Internet.
Thanks. Tag: OT: Colier copiers / Document Systems` Tag: 132977
Exchange 2000 Install Issues
After install SBS2000 I noticed Exchange Server did not
install. So I read some knowledgebase articles to install
Exchange Server. So I went into Add/Remove Programs and
selected SBS2000. I am now at the Component Selection
screen. I try and install Exchange Server and I get a
popup that states: Before this component can be modified,
all parent components must have an action selected. So I
go to change the action for Microsoft Exchange 2000 and my
options are: None (Installed), Reinstall, Remove,
Change. I select Reinstall and now I don't receive the
popup, but when I try and install the components the only
option is: ---. If I try and remove I get an error that
users are in the mailbox store. Please Help!
Thanks,
James Tag: OT: Colier copiers / Document Systems` Tag: 132975
SBS re-install questions...
We are running SBS2000 with around 30 Windows 2000 Pro
clients.
The Dell PowerEdge which SBS2000 sits on is non-RAID,
although we do full tape backups every night. So
therefore, I am to order a new Dell PowerEdge, install a
fresh copy of SBS2000, patch the box and migrate the
Exchange mailboxes over using Exmerge.
I have read the Migration documents on the MS Site, but I
have some questions:
1. Can we have Exchange2000 on a separate box?
2. What are the steps for the migration..is there an
updated copy somewhere? I believe the document on the MS
site is quite old
If someone could answer the above, it would be very much
appreciated.
Sachin Tag: OT: Colier copiers / Document Systems` Tag: 132974
Exchange Server
I am trying to email out to persons who have the same isp
as myself. My exchange server is kicking the mail back at
me saying these addresses are undeliverable. I have smtp
connectors and pop3 connectors set up using earthlink as
my domain. E-mail addresses with earthlink as the domain
are coming back as undeliverable. All other mail is
working both coming and going.
Do I need to set up a special connector for my isp domain
email clients?
Thanks in advance for any and all help.
Norman Tag: OT: Colier copiers / Document Systems` Tag: 132968
Network Connectivity
SBS2000 w/ 2 nic, Client Win2000
Have 2 issues, not sure if they are related.
Just installed a Sharp AR-M280 network printer that has static IP of
192.168.16.250 that is constantly dropping off LAN. Try to ping and it
times out.
Have adjusted and turned off power saving features but it still looses
connection with LAN.
Once you turn it off and back on then it is recognized on the LAN (can be
pinged from server or
workstations).
Also, when I leave Outlook Express 6 running for an extended length of time
(while watching this newsgroup) it is getting an error message "The TCP/IP
connection was unexpectedly terminated by the server." Once I close and
open OE it is fine (for a while).
Any ideas? Tag: OT: Colier copiers / Document Systems` Tag: 132966
Cisco VPN and SBS 2000
I hope I can find an answer for this. I am trying to get a connection
to a SBS 2000 server over a VPN.
I have a Small Business Server 2000 network at the office. The
Internal IP range is 10.0.0.x. The server is 10.0.0.1 and the clients
are assigned similar IP addresses.
The other network card is plugged into the Cisco router. The IP
addresses are 192.168.1.1 for the router, and 192.168.1.2 for the
internal NIC.
The other end of the Cisco router VPN is at a home office. The router
there is 192.168.2.1 and the computer it is connected to is
192.168.2.2.
The ISP that manages the routers assure me that the VPN is working
fine. I can PING both ends of the VPN, but I cannot browse.
If I type \\192.168.1.2\share, I get an error message saying that it
cannot find it. I know this share exists though.
Does anyone have any ideas what could be wrong? Tag: OT: Colier copiers / Document Systems` Tag: 132961
Assigning my internet Domain name to Exchange
I have my local domain as (mydomain.local). I bought a
domain name ( mydomain.com).
I pointed my MX record to my server and still I can not
receive E-mails from internet clients. Do I have to
contact my Domain vendor (Network solutions)?
Also, do I have to create an A record pointing to my
external address or my exchange server?
Thanks, Tag: OT: Colier copiers / Document Systems` Tag: 132959
Cisco VPN in SBS 2000
I hope I can find an answer for this. I am trying to get a connection to a SBS 2000 server over a VPN.
I have a Small Business Server 2000 network at the office. The Internal IP range is 10.0.0.x. The server is 10.0.0.1 and the clients are assigned similar IP addresses.
The other network card is plugged into the Cisco router. The IP addresses are 192.168.1.1 for the router, and 192.168.1.2 for the internal NIC.
The other end of the Cisco router VPN is at a home office. The router there is 192.168.2.1 and the computer it is connected to is 192.168.2.2.
The ISP that manages the routers assure me that the VPN is working fine. I can PING both ends of the VPN, but I cannot browse.
If I type \\192.168.1.2\share, I get an error message saying that it cannot find it. I know this share exists though.
Does anyone have any ideas what could be wrong? Tag: OT: Colier copiers / Document Systems` Tag: 132956
Can not connect to server by using Termininal Services Client.
Server is running, but there are something missing!
I can VPN to server, but I can not use Terminincal
Services Client to connect to server. Also, Web Mail
access is not functioning!
Is there setting that I can check it! Tag: OT: Colier copiers / Document Systems` Tag: 132955
Exchange Filter??
How do i go abouot setting up a filter within exchange to
stop spam from getting to peoples inbox? Is this something
that can be done or does each client have to set thier own
up?
Thanks,
Mike Tag: OT: Colier copiers / Document Systems` Tag: 132949
Web proxy logs
Can someone explain this please. why does it appear in my web proxy logs
amonst the normal users listings?
217.12.2.218 anonymous - 2003-09-26 04:59:50 myserver - 217.22.65.99 - - 63
3818 - - GET
http://217.37.59.65/default.ida?XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXX%u9090%u6858%ucbd3%u7801%u9090%u6858%ucbd3%u7801
%u9090%u6858%ucbd3%u7801%u9090%u9090%u8190%u00c3%u0003%u8b00%u531b%u53ff%u00
78%u0000%u00=a - 12202 Tag: OT: Colier copiers / Document Systems` Tag: 132946
Exchange Password Problem
Hi,
I have one user (who happens to be the MD) who is having problems logging
into exchange remotely. Everytime she tries to log into exchange through
outlook over a VPN (PPTP) connection is keeps asking her for her exchange
password and then rejects it. I've nuked her account so that I was sure it
wasn't anything to do with the server and surprise surprise... it doesn't..
Does anyone know what might be causing the problem and how to fix it?
Thanks in advance,
SW Tag: OT: Colier copiers / Document Systems` Tag: 132944
getting thrown off the network
I don't know if this is the right place to ask this but
we're using SBS 2000 and one of my colleagues, who is
using Windows 98, keeps getting thrown off our shared
network drive, not being able to access our shared files.
Anyone have any ideas why?
They also have problems receiving external emails
sometimes, getting the error message :
"Your message did not reach some or all of the intended
recipients.
Unable to deliver the message due to a communications
failure"
Is this related?
Thanks Tag: OT: Colier copiers / Document Systems` Tag: 132943
SBS 4.5 to SBS 2000 - Keeping Domain Profiles
Hi there, I'm upgrading 4.5 to 2000 using the migration upgrade. I'm going
to perform a migration upgrade and have read the relevant white paper. My
only query is as follows:
I would like to keep the current domain intact as I have an NT4 BDC that
needs to stay on the network as a BDC. I intend to use a spare box approach
to keep the domain by doing the following:
- Install NT4 Server on spare box as BDC
- unplug box from network and connect to new network
- promote to PDC
- upgrade spare box to 2000 Server and set up AD
- plug new box into new network
- install SBS 2000 on new box as a DC
- remove spare box from network
- migrate workstations to new network
My main question is will the user profiles on the workstations be okay? I
have a mixture of NT/2000/XP machines - will any of these have a problem? I
assume that the NT ones will log in fine as they will use the NetBIOS domain
name but what about the 2000 and XP machines - will they connect to the
domain without noticing any difference?
Any comments/suggestions appreciated.
Thanks,
Richard. Tag: OT: Colier copiers / Document Systems` Tag: 132937
symantec realtime protection stops
hi guys,
having a bit of a prolem running Norton anti-virus for
clients. Its on sbs server 2000. I have a seperate
symantec server that manages clients so that my pdc runs
client. I've tried un-installing but still giving the same
problem. I had to reinstall sbs server but still giving
the problem.
It causes the server to slow down and some programs wont
run with this problem.
please help. Tag: OT: Colier copiers / Document Systems` Tag: 132936
E00.LOG
Someone has deleted the E00.Log by "mistake" from
C:\\Programfiles\exchsrvr\MDBDATA does anyone know how I
can rectify the situation?
Any suggestions would be helpful Tag: OT: Colier copiers / Document Systems` Tag: 132934
Windows 2000 SBS to Windows 2003 Server Migration
Hi, please could anyone give me their input. We are migrating from Windows
2000 SBS to Windows 2003 Server and we need to re-install our Active
Directory Controller/DNS Server from scratch with Windows 2003 Server.
We plan on taking the following steps to get move over to Windows
Server 2003:
1. Run adprep on the Small Business Server 2000 GC to prep forest and domain
for Windows Server 2003
2. Install Windows Server 2003 on a new temporary machine and run DCPROMO to
promote the server to an additional controller for the domain
3. Change the GC role and the FSMO roles to point to the new temporary
server
4. Run DCPROMO on the old Small Business Server 2000 to demote it to a
member server
5. Shut down the machine
6. Remove the SBS 2000 Server from AD Sites and Services
7. Format the SBS 2000 Server and install Windows Server 2003 on it
8. Run DCPROMO to promote to an additional controller for the domain
9. Take over the GC and FSMO roles
10. Shut down temporary server
11. Remove the temporary server from AD Sites and Services
I need advice on how to move over the DNS to the temporary server during
this whole process - otherwise after Windows 2003 Server is re-installed on
the main controller, we wont be able to promote it and get back the AD from
the temporary server.
Do you suggest I create a secondary DNS server on the temporary server using
the procedures described in this MS article:
http://support.microsoft.com/default.aspx?scid=kb;en-us;313563&Product=win20
00
Theoretically, that would copy all the dns zones and settings required by
active directory to the new server from the old controller which we want to
re-install.
Thanks Tag: OT: Colier copiers / Document Systems` Tag: 132931
sbs2000 and mail delivery issue
Hi
i am running sbs 2000 with a dial up connection to the
internet.
Up until recently, my server would dial up and download
mail and on each workstation in microsoft outlook, mail
would be in the inbox. I could see it without having to
hit the send/receive button in ms outlook.
Now, my server will still dial up and download mail but
on each workstation in microsoft outlook, you have to hit
the send/receive button to get mail.
How can i change this back so that mail goes into the
mailbox automatically again without having to hit the
send/receive button in ms outlook?
I do not understand what has changed as i have not
changed anything.
any ideas anyone?
thanks Tag: OT: Colier copiers / Document Systems` Tag: 132917
external emails are coming in twice!!
Hi All,
Here's a funny thing. If an email is sent from outside the organisation to
an SBS distribution list then it comes through to everyone as usual. About
15 minutes to an hour later the same message is sent to everyone again this
time in plain text. This does not happen if an email is sent internally to a
distribution list address and emails sent from outside to indiviudal clients
just arrive once only.
I have SBS2000 with 17 clients mainly XP.
Server has two NICs second one connected to the Internet via a Netgear DG814
router.
Emails are sent by SMTP and collected via POP3 from our ISP.
Any ideas anyone?
Cheers, David, UK Tag: OT: Colier copiers / Document Systems` Tag: 132914
Re pop 3 connector
I have also noticed thatI cannot connect to my isps mail
server from outlook express ( socket error 10065 ) on the
my sbs server although I can from the client machines. I
have looked to see if I have any filtering but cannot seem
to see anything.
Any help would be greatly appreciated
Thanks In advance Tag: OT: Colier copiers / Document Systems` Tag: 132913
Pop3 connector error
Please help !!!!!!
I am trying to get the pop3 connector to work. The error
in the event log is 10065. Am I overlooking someting
stupid?? Tag: OT: Colier copiers / Document Systems` Tag: 132908
Problem receiving mail (2 NIC, router, dynamic IP)
I have an SBS client who is having huge problems receiving mail. Many
messages aren't getting through to them. A typical NDR at the sender would
be:
<conversation with mail.company.com [123.123.100.101] timed out while
sending end of data -- message may be sent more than once>
The environment is: SBS 2000 with SP1, ADSL internet connection using 2nd
NIC and router, dynamic IP address and using a dynamic DNS provider to
resolve the server's Exchange address.
We're getting a little desparate - we suspect that hundreds of messages are
getting lost.
Suggestions, please? Tag: OT: Colier copiers / Document Systems` Tag: 132903
licences move/reinstall
Hi,
Does anyone know the right procedure to reinstall=20
(reformat) the server without loosing the licences?
In other words: =BFhow shoud I "backup/move" the licences=20
and restore them later in another fresh install?
regards. Tag: OT: Colier copiers / Document Systems` Tag: 132902
No Server Access via Dial-up Modem
One of our clients has a 2x NIC SBS2k setup with a fixed IP on their WAN,
most of the staff use VPN fine and as administrators we use TS to administer
the server, all fine. The box is fully patched. As a backup there is a 56K
modem which we used to use to dial into the server if the 'net was down.
We don't know what we've done (or haven't done) but now the server answers
our dial-up call OK but the negotiation never finishes and the line is
dropped. The event log reports H. 323 Gatekeeper errors of 28 and 47 -
researched these but not much I understand! (Not even sure they're
relevant.)
Any pointers appreciated, TIA.
Regards
Norm Hughes Tag: OT: Colier copiers / Document Systems` Tag: 132898
TS - Run App on Logon not always working
Firstly, sorry for posting a blank page .. too quick with the trigger
finger.
Have a network with a SBS 2000 Server and Windows 2000 (member) TS.
The Environment settings for the User when logging on are set to run the
same application (accounting package). When the close the App the session
closes. No VPN only network logons.
All has been working fine up until a week ago where some users are actually
getting the desktop and the App is not running at Logon. Open another
session and it works fine.
The users that appear to be having the problem are running the RDP Client
and not the TS Client (but not all RDP Clients are experiencing the
problem).
Has anyone encountered something similar ... Technet and Google have proved
fruitless so far.
Andrew
Country NSW Tag: OT: Colier copiers / Document Systems` Tag: 132897
mcafee groupshield & netshield - update
Hi.
My sbs2000 connects to the net via adsl, using ppp over ethernet protocol.
Since two weeks ago, I was using a modem and raspppoe to connect, but, as
you suggested, we decided to buy a router and remove pppoe -----"for obvious
security reasons"----
ok, installed the router on the second nic, ran ICW, and everything was
re-configured in few minutes and worked fine
but....
but, starting that day, the antivirus solution installed on the server,
mcafee groupshield and netshield, doesn't auto-update anymore.....
I tried configuring the Av to use or not use the proxy server, but the
result didn't change......
From the server I can surf the web, and even go, using explorer, to
ftp.nai.com where the updates are resident......but the av says "can't
connect to update server".....
Can you help me please???
Forgetting: all the clients are able to autoupdate their mcafee
virusscan....
thanks
bye Tag: OT: Colier copiers / Document Systems` Tag: 132894
User Name comment
Does anyone know where the comment that appears next to a
users PC in windows explorer such as user name is found on
a windows 2000 operating system.
Phil Tag: OT: Colier copiers / Document Systems` Tag: 132893
please help me
I was wondering if anyone can shine some light on this
particular error message. I am not able to find much on
this subject beyond the description of what NetDDE is.
I started receiving this error message and at the same
time I am not able to access one of the servers on our
network. I am able to ping and connect to the server by
using the ip address, but I can't do it via it's name.
I know it is not a WINS problem and all of my network
settings are correct.
Source: NetDDE
Event ID: 206
Description: Listen failed: 15
this error message appears in the eventvwr every 30
minutes.
----------------------------------------------------------------------------
----
. Tag: OT: Colier copiers / Document Systems` Tag: 132890
slow client log on
I have 2 xp clients that are taking extremely long (1-3
minutes) to load the user profile (2Mb)
I have set the user to local profile but this has not
helped.
I have another site that is using normal W2k server and
have no problems
- there are no error logs
Any Ideas
Regards Tag: OT: Colier copiers / Document Systems` Tag: 132886
<< SBS news of the week September 28, 2003>>
news://msnews.microsoft.com:119/uMk77GChDHA.452@TK2MSFTNGP12.phx.gbl
Kevin's song of the week
http://www.microsoft.com/sbserver/
10 days 8 hours 54 minutes and 44 seconds to go before SBS2003 launches
SBS is going to the Big Easy and the Worldwide Partner Conference to
make it's debut...
http://www.microsoft.com/partner/events/wwpartnerconference/registration.htm
SBS specific events....
http://www.microsoft.com/partner/events/wwpartnerconference/sessions_sbs.htm
So what can you do in the meantime?
Well get cracking on getting information out to your contacts and
clients. Look over your fleets of SBS 4.5's and gently start informing
your clients that the timeclock is ticking on that platform.
SBS community efforts and information
news://msnews.microsoft.com:119/uZdLhXMhDHA.1872@TK2MSFTNGP10.phx.gbl
Read Harry's newsletter for more info on events...
http://www.nethealthmon.com/Issue2-10.htm
----------------------
When I was getting ready to roll out SBS2000 in my office, I went to the
Hands On Lab in LA.
http://www.msusapartnerreadiness.com/sbs2003.asp
SBS 2003 Hands On Labs UPDATE!
There is an update to share with you on the forthcoming USA SBS 2003
hands on lab tour commencing in late September. I treat it as a high
honor that I?ve been invited to assist in the delivery of the hands on
labs in several cities. You will recall from the last newsletter that
two sessions during the day together are offered. The morning session is
introductory in nature for the new SBSer. The afternoon session is more
intermediate/advanced and designed to show the differences from SBS 2000
-> to -> SBS 2003 (delta changes). You can sign up for either session or
both at http://www.msusapartnerreadiness.com/sbs2003.asp.
The entire SBS hands-on lab schedule is:
9/29/2003 Dallas TX (delivered by Brelsford)
9/29/2003 St. Louis MO
10/1/2003 Irvine CA (delivered by Brelsford)
10/1/2003 Arlington VA
10/6/2003 Miami FL (delivered by Brelsford)
10/6/2003 Minneapolis MN
10/13/2003 New York (East Elmhurst) NY (delivered by Brelsford)
10/13/2003 Detroit MI
10/15/2003 South San Francisco (Burlingame) CA (delivered by Brelsford)
10/15/2003 Portland OR
10/20/2003 Los Angeles CA (delivered by Brelsford)
10/20/2003 Indianapolis IN
10/22/2003 Chicago (Arlington Heights) IL (delivered by Brelsford)
10/22/2003 Morristown NJ
10/27/2003 Phoenix AZ (delivered by Brelsford)
10/27/2003 Atlanta GA
10/29/20