Marina
Thu Jan 15 12:53:08 CST 2004
Hi Stuart,
You can delete them all, as they will be recreated automatically.
--
Regards,
Marina
"Stuart" <anonymous@discussions.microsoft.com> schreef in bericht
news:009701c3db88$ac4d05f0$a301280a@phx.gbl...
> Hi Jim - I really appreeciate your advice but I'm
> confused. In Kb 292822 section 2e it says If the Ip
> address of the for the dial up interface is listed (or
> other IP addresses from the Internal LAN subnet) delete
> these entriesfrom the WINS database. Doesn't that mean
> delete 192.168.16.XX IP addresses? Sorry if I'm being
> stupid but i am willing to listen to get it right.
>
> Regards,
>
> Stuart
> >-----Original Message-----
> >No. Sort wins by ip. Delete any entry that does not have
> an ip in the
> >same network as your internal network. If you have a
> standard SBS
> >install every entry in WINS should have an ip of
> 192.168.16.x. Any
> >other ip should be deleted after you make all the edits
> in the
> >article. If your internal network has some other ip
> scheme you would
> >of course work accordingly.
> >
> >"Stuart" <anonymous@discussions.microsoft.com> wrote:
> >
> >>Hi Marina - thanks for the advice. Just a quick
> >>confirmation Q - The dial in interface is the IP
> address
> >>of the Interal NIC?
> >>
> >>Regards & thanks
> >>
> >>Stuart
> >>>-----Original Message-----
> >>>You don't need the hotfix, but you do need to apply
> >>those regedits.
> >>>You don't add a range, just add a value and give it
> the
> >>name
> >>>RegisterDnsARecords, Data Type should be REG_DWORD,
> >>value should be 0
> >>>For the DisableNetbiosOverTcpip you use data type
> >>REG_DWORD, Radix
> >>>Hexadecimal, value should be 1.
> >>>
> >>>WINS:
> >>>Active Registrations, select Find by Owner. Select
> your
> >>server's IP, click
> >>>Find Now.
> >>>Doubleclick the entries for servername[00h] and
> >>servername[20h] to verify
> >>>that there is only 1 address in them.
> >>>If you see the IP of the dial-in interface, delete
> those
> >>entries.
> >>>
> >>>--
> >>>Regards,
> >>>
> >>>Marina
> >>>
> >>>"Stuart" <anonymous@discussions.microsoft.com> schreef
> >>in bericht
> >>>news:0d1301c3daac$d8c0a600$a301280a@phx.gbl...
> >>>> I've followed Kb 320697 & the last point was to
> install
> >>>> hotfix 292822 - do I have to even though I've SP4
> >>>> installed? If so & being new to this Registry editor
> >>>> lark, I have come across a few niggles that I can't
> >>work
> >>>> out. I can add the Value Name & Data Type but in the
> >>>>
> >>HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Net
> lo
> >>>> gon\Parameters - how do i add the Range? Is this
> just a
> >>>> data entry of 0 in the DWORD editor? Also in the
> >>>>
> >>HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Rem
> ot
> >>>> eAccess\Parameters\IP - what data do I add? It says
> 1
> >>or
> >>>> 0, 1=DisableNetbios. Do i just enter 1?
> >>>> Next Question!! In the WINS database entries - when
> it
> >>>> says delete the IP addresses if same as dial in
> >>>> interface - is this the internal NIC subnet?
> >>>>
> >>>> Thanks for your time & any input much welcome
> >>>>
> >>>> Stuart
> >>>
> >>>
> >>>.
> >>>
> >
> >Jim B. SBS MVP
> >remove the mvp to send email
> >.
> >