In PP 2003 when you used the pack and go for CD's the burned CD would
outo-run, opening in FULL SCREEN, as soon as you popped it into the CD drive.
I can't seem to make the 2007 Package for CD act the same way. Instead,
when you pop the recorded CD into the drive it opens in the explorer window
and you have to make a selection. This does not work for my purposes. I am
using it as a handout/mailer and need it to run immediately. Also, only a
couple of the files actually burned to the CD. It was a new CD-R. I tried
it on another cd from my new vist laptop and it copied ok but did not outrun.
ANy help would be appreciated. See second post for another PP 2007 problem.
Thanks

Re: 2007 Package for CD VS 2003 Pack and Go by Michael

Michael
Wed Oct 08 15:24:30 CDT 2008

It works the same way as 2003. Use the Publish option and select the copy to
folder option, then burn all the created files to your CD

--
Michael Koerner
MS MVP - PowerPoint


"JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
In PP 2003 when you used the pack and go for CD's the burned CD would
outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
drive.
I can't seem to make the 2007 Package for CD act the same way. Instead,
when you pop the recorded CD into the drive it opens in the explorer window
and you have to make a selection. This does not work for my purposes. I am
using it as a handout/mailer and need it to run immediately. Also, only a
couple of the files actually burned to the CD. It was a new CD-R. I tried
it on another cd from my new vist laptop and it copied ok but did not
outrun.
ANy help would be appreciated. See second post for another PP 2007
problem.
Thanks



Re: 2007 Package for CD VS 2003 Pack and Go by JoanInGA

JoanInGA
Wed Oct 08 15:42:03 CDT 2008

Thank you, I will try that. I have been using the Publish option and
selecting the Copy to CD option, which I thought should accomplish the same
thing with fewer steps. Are you saying that the Copy to CD does not work
the same as copying to a folder?

"Michael Koerner" wrote:

> It works the same way as 2003. Use the Publish option and select the copy to
> folder option, then burn all the created files to your CD
>
> --
> Michael Koerner
> MS MVP - PowerPoint
>
>
> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
> In PP 2003 when you used the pack and go for CD's the burned CD would
> outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
> drive.
> I can't seem to make the 2007 Package for CD act the same way. Instead,
> when you pop the recorded CD into the drive it opens in the explorer window
> and you have to make a selection. This does not work for my purposes. I am
> using it as a handout/mailer and need it to run immediately. Also, only a
> couple of the files actually burned to the CD. It was a new CD-R. I tried
> it on another cd from my new vist laptop and it copied ok but did not
> outrun.
> ANy help would be appreciated. See second post for another PP 2007
> problem.
> Thanks
>
>
>

Re: 2007 Package for CD VS 2003 Pack and Go by Michael

Michael
Wed Oct 08 16:17:22 CDT 2008

To be honest, I have never used the copy to CD option direct. I've always
used the copy to folder and then burnt the files to the CD. Only because
I've heard stories using just the copy to CD option where links break, and
all files not copied to the CD

--
Michael Koerner
MS MVP - PowerPoint


"JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
Thank you, I will try that. I have been using the Publish option and
selecting the Copy to CD option, which I thought should accomplish the same
thing with fewer steps. Are you saying that the Copy to CD does not work
the same as copying to a folder?

"Michael Koerner" wrote:

> It works the same way as 2003. Use the Publish option and select the copy
> to
> folder option, then burn all the created files to your CD
>
> --
> Michael Koerner
> MS MVP - PowerPoint
>
>
> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
> In PP 2003 when you used the pack and go for CD's the burned CD would
> outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
> drive.
> I can't seem to make the 2007 Package for CD act the same way. Instead,
> when you pop the recorded CD into the drive it opens in the explorer
> window
> and you have to make a selection. This does not work for my purposes. I
> am
> using it as a handout/mailer and need it to run immediately. Also, only
> a
> couple of the files actually burned to the CD. It was a new CD-R. I
> tried
> it on another cd from my new vist laptop and it copied ok but did not
> outrun.
> ANy help would be appreciated. See second post for another PP 2007
> problem.
> Thanks
>
>
>



Re: 2007 Package for CD VS 2003 Pack and Go by JoanInGA

JoanInGA
Wed Oct 08 17:18:05 CDT 2008

Ok . . . well that seems to be exactly what I am experiencing. I will try
the option you mentoned. Thanks.

"Michael Koerner" wrote:

> To be honest, I have never used the copy to CD option direct. I've always
> used the copy to folder and then burnt the files to the CD. Only because
> I've heard stories using just the copy to CD option where links break, and
> all files not copied to the CD
>
> --
> Michael Koerner
> MS MVP - PowerPoint
>
>
> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
> Thank you, I will try that. I have been using the Publish option and
> selecting the Copy to CD option, which I thought should accomplish the same
> thing with fewer steps. Are you saying that the Copy to CD does not work
> the same as copying to a folder?
>
> "Michael Koerner" wrote:
>
> > It works the same way as 2003. Use the Publish option and select the copy
> > to
> > folder option, then burn all the created files to your CD
> >
> > --
> > Michael Koerner
> > MS MVP - PowerPoint
> >
> >
> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
> > In PP 2003 when you used the pack and go for CD's the burned CD would
> > outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
> > drive.
> > I can't seem to make the 2007 Package for CD act the same way. Instead,
> > when you pop the recorded CD into the drive it opens in the explorer
> > window
> > and you have to make a selection. This does not work for my purposes. I
> > am
> > using it as a handout/mailer and need it to run immediately. Also, only
> > a
> > couple of the files actually burned to the CD. It was a new CD-R. I
> > tried
> > it on another cd from my new vist laptop and it copied ok but did not
> > outrun.
> > ANy help would be appreciated. See second post for another PP 2007
> > problem.
> > Thanks
> >
> >
> >
>
>
>

Re: 2007 Package for CD VS 2003 Pack and Go by Echo

Echo
Wed Oct 08 17:45:04 CDT 2008

Yeah, what Michael said. It *should* work the same way -- it does in theory,
anyway. But in practice, the CDs are often just not right. So I do like
Michael does: I choose copy to folder, then I burn all the files in the
folder to the CD using my CD burning software.

--
Echo [MS PPT MVP] http://www.echosvoice.com
What's new in PPT 2007? http://www.echosvoice.com/2007.htm
Fixing PowerPoint Annoyances http://tinyurl.com/36grcd
PowerPoint 2007 Complete Makeover Kit http://tinyurl.com/32a7nx


"JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
news:FAC0D891-35B2-407F-84A1-6B2D186CB2DE@microsoft.com...
> Ok . . . well that seems to be exactly what I am experiencing. I will try
> the option you mentoned. Thanks.
>
> "Michael Koerner" wrote:
>
>> To be honest, I have never used the copy to CD option direct. I've always
>> used the copy to folder and then burnt the files to the CD. Only because
>> I've heard stories using just the copy to CD option where links break,
>> and
>> all files not copied to the CD
>>
>> --
>> Michael Koerner
>> MS MVP - PowerPoint
>>
>>
>> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
>> news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
>> Thank you, I will try that. I have been using the Publish option and
>> selecting the Copy to CD option, which I thought should accomplish the
>> same
>> thing with fewer steps. Are you saying that the Copy to CD does not
>> work
>> the same as copying to a folder?
>>
>> "Michael Koerner" wrote:
>>
>> > It works the same way as 2003. Use the Publish option and select the
>> > copy
>> > to
>> > folder option, then burn all the created files to your CD
>> >
>> > --
>> > Michael Koerner
>> > MS MVP - PowerPoint
>> >
>> >
>> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
>> > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
>> > In PP 2003 when you used the pack and go for CD's the burned CD would
>> > outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
>> > drive.
>> > I can't seem to make the 2007 Package for CD act the same way.
>> > Instead,
>> > when you pop the recorded CD into the drive it opens in the explorer
>> > window
>> > and you have to make a selection. This does not work for my purposes.
>> > I
>> > am
>> > using it as a handout/mailer and need it to run immediately. Also,
>> > only
>> > a
>> > couple of the files actually burned to the CD. It was a new CD-R. I
>> > tried
>> > it on another cd from my new vist laptop and it copied ok but did not
>> > outrun.
>> > ANy help would be appreciated. See second post for another PP 2007
>> > problem.
>> > Thanks
>> >
>> >
>> >
>>
>>
>>


Re: 2007 Package for CD VS 2003 Pack and Go by JoanInGA

JoanInGA
Wed Oct 08 18:47:01 CDT 2008

Ok . . . thanks. I just walk back in the house and I am about to put it to
the test. Do you have any sugestions for my other post, 2 post above this
one regarding music stopping in PowerPoint when I open a PDF file? Thanks .
. . Joan

"Echo S" wrote:

> Yeah, what Michael said. It *should* work the same way -- it does in theory,
> anyway. But in practice, the CDs are often just not right. So I do like
> Michael does: I choose copy to folder, then I burn all the files in the
> folder to the CD using my CD burning software.
>
> --
> Echo [MS PPT MVP] http://www.echosvoice.com
> What's new in PPT 2007? http://www.echosvoice.com/2007.htm
> Fixing PowerPoint Annoyances http://tinyurl.com/36grcd
> PowerPoint 2007 Complete Makeover Kit http://tinyurl.com/32a7nx
>
>
> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> news:FAC0D891-35B2-407F-84A1-6B2D186CB2DE@microsoft.com...
> > Ok . . . well that seems to be exactly what I am experiencing. I will try
> > the option you mentoned. Thanks.
> >
> > "Michael Koerner" wrote:
> >
> >> To be honest, I have never used the copy to CD option direct. I've always
> >> used the copy to folder and then burnt the files to the CD. Only because
> >> I've heard stories using just the copy to CD option where links break,
> >> and
> >> all files not copied to the CD
> >>
> >> --
> >> Michael Koerner
> >> MS MVP - PowerPoint
> >>
> >>
> >> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> >> news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
> >> Thank you, I will try that. I have been using the Publish option and
> >> selecting the Copy to CD option, which I thought should accomplish the
> >> same
> >> thing with fewer steps. Are you saying that the Copy to CD does not
> >> work
> >> the same as copying to a folder?
> >>
> >> "Michael Koerner" wrote:
> >>
> >> > It works the same way as 2003. Use the Publish option and select the
> >> > copy
> >> > to
> >> > folder option, then burn all the created files to your CD
> >> >
> >> > --
> >> > Michael Koerner
> >> > MS MVP - PowerPoint
> >> >
> >> >
> >> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> >> > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
> >> > In PP 2003 when you used the pack and go for CD's the burned CD would
> >> > outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
> >> > drive.
> >> > I can't seem to make the 2007 Package for CD act the same way.
> >> > Instead,
> >> > when you pop the recorded CD into the drive it opens in the explorer
> >> > window
> >> > and you have to make a selection. This does not work for my purposes.
> >> > I
> >> > am
> >> > using it as a handout/mailer and need it to run immediately. Also,
> >> > only
> >> > a
> >> > couple of the files actually burned to the CD. It was a new CD-R. I
> >> > tried
> >> > it on another cd from my new vist laptop and it copied ok but did not
> >> > outrun.
> >> > ANy help would be appreciated. See second post for another PP 2007
> >> > problem.
> >> > Thanks
> >> >
> >> >
> >> >
> >>
> >>
> >>
>
>

Re: 2007 Package for CD VS 2003 Pack and Go by JoanInGA

JoanInGA
Wed Oct 08 20:31:01 CDT 2008

Michael,

First, thank you for trying to help. Thought I would pass this on to you
for reference. I have tried every which way to write a CD in PP 2007 that
opens immediately in full screen mode when you insert the CD. I tried the
method you mentioned and the results were the same. When I ran the CD it
opened in a file. I had to click on the presentation and then it opened in
PowerPoint instead of the full screen/viewer mode. I tried it a couple of
times, then tried writing to the CD again, without success. In total
frustration, I installed my old PP 2003 disc and used it exactly as I had
always done. I used the package for CD and wrote directly to the CD from
PowerPoint. I put it in the player and, presto!!! It opened in full screen
mode without a hitch and ran perfectly! I am convinced that there is a
problem in PP 2007. Who can I write to at Microsoft about this issue? Thank
you.

"Michael Koerner" wrote:

> To be honest, I have never used the copy to CD option direct. I've always
> used the copy to folder and then burnt the files to the CD. Only because
> I've heard stories using just the copy to CD option where links break, and
> all files not copied to the CD
>
> --
> Michael Koerner
> MS MVP - PowerPoint
>
>
> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
> Thank you, I will try that. I have been using the Publish option and
> selecting the Copy to CD option, which I thought should accomplish the same
> thing with fewer steps. Are you saying that the Copy to CD does not work
> the same as copying to a folder?
>
> "Michael Koerner" wrote:
>
> > It works the same way as 2003. Use the Publish option and select the copy
> > to
> > folder option, then burn all the created files to your CD
> >
> > --
> > Michael Koerner
> > MS MVP - PowerPoint
> >
> >
> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
> > In PP 2003 when you used the pack and go for CD's the burned CD would
> > outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
> > drive.
> > I can't seem to make the 2007 Package for CD act the same way. Instead,
> > when you pop the recorded CD into the drive it opens in the explorer
> > window
> > and you have to make a selection. This does not work for my purposes. I
> > am
> > using it as a handout/mailer and need it to run immediately. Also, only
> > a
> > couple of the files actually burned to the CD. It was a new CD-R. I
> > tried
> > it on another cd from my new vist laptop and it copied ok but did not
> > outrun.
> > ANy help would be appreciated. See second post for another PP 2007
> > problem.
> > Thanks
> >
> >
> >
>
>
>

Re: 2007 Package for CD VS 2003 Pack and Go by Echo

Echo
Wed Oct 08 21:16:33 CDT 2008

Are you burning the folder to the CD? You need to burn the *contents* of the
folder, not the folder itself. Just the contents, so they're "loose" on the
CD.

Did you opt to include the Viewer when you package for CD in 2007?

--
Echo [MS PPT MVP] http://www.echosvoice.com
What's new in PPT 2007? http://www.echosvoice.com/2007.htm
Fixing PowerPoint Annoyances http://tinyurl.com/36grcd
PowerPoint 2007 Complete Makeover Kit http://tinyurl.com/32a7nx


"JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
news:1964E3F9-6950-4651-B6D3-F832F1C157A8@microsoft.com...
> Michael,
>
> First, thank you for trying to help. Thought I would pass this on to you
> for reference. I have tried every which way to write a CD in PP 2007 that
> opens immediately in full screen mode when you insert the CD. I tried the
> method you mentioned and the results were the same. When I ran the CD it
> opened in a file. I had to click on the presentation and then it opened
> in
> PowerPoint instead of the full screen/viewer mode. I tried it a couple of
> times, then tried writing to the CD again, without success. In total
> frustration, I installed my old PP 2003 disc and used it exactly as I had
> always done. I used the package for CD and wrote directly to the CD from
> PowerPoint. I put it in the player and, presto!!! It opened in full
> screen
> mode without a hitch and ran perfectly! I am convinced that there is a
> problem in PP 2007. Who can I write to at Microsoft about this issue?
> Thank
> you.
>
> "Michael Koerner" wrote:
>
>> To be honest, I have never used the copy to CD option direct. I've always
>> used the copy to folder and then burnt the files to the CD. Only because
>> I've heard stories using just the copy to CD option where links break,
>> and
>> all files not copied to the CD
>>
>> --
>> Michael Koerner
>> MS MVP - PowerPoint
>>
>>
>> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
>> news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
>> Thank you, I will try that. I have been using the Publish option and
>> selecting the Copy to CD option, which I thought should accomplish the
>> same
>> thing with fewer steps. Are you saying that the Copy to CD does not
>> work
>> the same as copying to a folder?
>>
>> "Michael Koerner" wrote:
>>
>> > It works the same way as 2003. Use the Publish option and select the
>> > copy
>> > to
>> > folder option, then burn all the created files to your CD
>> >
>> > --
>> > Michael Koerner
>> > MS MVP - PowerPoint
>> >
>> >
>> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
>> > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
>> > In PP 2003 when you used the pack and go for CD's the burned CD would
>> > outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
>> > drive.
>> > I can't seem to make the 2007 Package for CD act the same way.
>> > Instead,
>> > when you pop the recorded CD into the drive it opens in the explorer
>> > window
>> > and you have to make a selection. This does not work for my purposes.
>> > I
>> > am
>> > using it as a handout/mailer and need it to run immediately. Also,
>> > only
>> > a
>> > couple of the files actually burned to the CD. It was a new CD-R. I
>> > tried
>> > it on another cd from my new vist laptop and it copied ok but did not
>> > outrun.
>> > ANy help would be appreciated. See second post for another PP 2007
>> > problem.
>> > Thanks
>> >
>> >
>> >
>>
>>
>>


Re: 2007 Package for CD VS 2003 Pack and Go by JoanInGA

JoanInGA
Wed Oct 08 22:12:00 CDT 2008

Hmmmm . . . very interesting. I do believe you have hit the nail on the
head! I draged the entire folder onto my CD burner, not just the contents.
I had never tried that method before so I was not familiar with it. But yes,
I did include the viewer so that it would run on any PC. Your solution has
also helped me to know how to burn to a DVD in my new laptop, since PP
doesn't provide for DVD burning. Thanks for helping with this. Did you
notice my post about "Linked Music IN PP Stops when Linked PDF files open in
PowerPoint?" It was two posts above this one. I havn't received any replies
on that one so maybe there's no way to make it work.

Joan

"Echo S" wrote:

> Are you burning the folder to the CD? You need to burn the *contents* of the
> folder, not the folder itself. Just the contents, so they're "loose" on the
> CD.
>
> Did you opt to include the Viewer when you package for CD in 2007?
>
> --
> Echo [MS PPT MVP] http://www.echosvoice.com
> What's new in PPT 2007? http://www.echosvoice.com/2007.htm
> Fixing PowerPoint Annoyances http://tinyurl.com/36grcd
> PowerPoint 2007 Complete Makeover Kit http://tinyurl.com/32a7nx
>
>
> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> news:1964E3F9-6950-4651-B6D3-F832F1C157A8@microsoft.com...
> > Michael,
> >
> > First, thank you for trying to help. Thought I would pass this on to you
> > for reference. I have tried every which way to write a CD in PP 2007 that
> > opens immediately in full screen mode when you insert the CD. I tried the
> > method you mentioned and the results were the same. When I ran the CD it
> > opened in a file. I had to click on the presentation and then it opened
> > in
> > PowerPoint instead of the full screen/viewer mode. I tried it a couple of
> > times, then tried writing to the CD again, without success. In total
> > frustration, I installed my old PP 2003 disc and used it exactly as I had
> > always done. I used the package for CD and wrote directly to the CD from
> > PowerPoint. I put it in the player and, presto!!! It opened in full
> > screen
> > mode without a hitch and ran perfectly! I am convinced that there is a
> > problem in PP 2007. Who can I write to at Microsoft about this issue?
> > Thank
> > you.
> >
> > "Michael Koerner" wrote:
> >
> >> To be honest, I have never used the copy to CD option direct. I've always
> >> used the copy to folder and then burnt the files to the CD. Only because
> >> I've heard stories using just the copy to CD option where links break,
> >> and
> >> all files not copied to the CD
> >>
> >> --
> >> Michael Koerner
> >> MS MVP - PowerPoint
> >>
> >>
> >> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> >> news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
> >> Thank you, I will try that. I have been using the Publish option and
> >> selecting the Copy to CD option, which I thought should accomplish the
> >> same
> >> thing with fewer steps. Are you saying that the Copy to CD does not
> >> work
> >> the same as copying to a folder?
> >>
> >> "Michael Koerner" wrote:
> >>
> >> > It works the same way as 2003. Use the Publish option and select the
> >> > copy
> >> > to
> >> > folder option, then burn all the created files to your CD
> >> >
> >> > --
> >> > Michael Koerner
> >> > MS MVP - PowerPoint
> >> >
> >> >
> >> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> >> > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
> >> > In PP 2003 when you used the pack and go for CD's the burned CD would
> >> > outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
> >> > drive.
> >> > I can't seem to make the 2007 Package for CD act the same way.
> >> > Instead,
> >> > when you pop the recorded CD into the drive it opens in the explorer
> >> > window
> >> > and you have to make a selection. This does not work for my purposes.
> >> > I
> >> > am
> >> > using it as a handout/mailer and need it to run immediately. Also,
> >> > only
> >> > a
> >> > couple of the files actually burned to the CD. It was a new CD-R. I
> >> > tried
> >> > it on another cd from my new vist laptop and it copied ok but did not
> >> > outrun.
> >> > ANy help would be appreciated. See second post for another PP 2007
> >> > problem.
> >> > Thanks
> >> >
> >> >
> >> >
> >>
> >>
> >>
>
>

Re: 2007 Package for CD VS 2003 Pack and Go by Echo

Echo
Thu Oct 09 00:00:17 CDT 2008

Sorry, I don't know anything about the music and the PDFs.

--
Echo [MS PPT MVP] http://www.echosvoice.com
What's new in PPT 2007? http://www.echosvoice.com/2007.htm
Fixing PowerPoint Annoyances http://tinyurl.com/36grcd
PowerPoint 2007 Complete Makeover Kit http://tinyurl.com/32a7nx


"JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
news:8613EF72-83F5-486A-956F-5D47CFB3D563@microsoft.com...
> Hmmmm . . . very interesting. I do believe you have hit the nail on the
> head! I draged the entire folder onto my CD burner, not just the
> contents.
> I had never tried that method before so I was not familiar with it. But
> yes,
> I did include the viewer so that it would run on any PC. Your solution
> has
> also helped me to know how to burn to a DVD in my new laptop, since PP
> doesn't provide for DVD burning. Thanks for helping with this. Did you
> notice my post about "Linked Music IN PP Stops when Linked PDF files open
> in
> PowerPoint?" It was two posts above this one. I havn't received any
> replies
> on that one so maybe there's no way to make it work.
>
> Joan
>
> "Echo S" wrote:
>
>> Are you burning the folder to the CD? You need to burn the *contents* of
>> the
>> folder, not the folder itself. Just the contents, so they're "loose" on
>> the
>> CD.
>>
>> Did you opt to include the Viewer when you package for CD in 2007?
>>
>> --
>> Echo [MS PPT MVP] http://www.echosvoice.com
>> What's new in PPT 2007? http://www.echosvoice.com/2007.htm
>> Fixing PowerPoint Annoyances http://tinyurl.com/36grcd
>> PowerPoint 2007 Complete Makeover Kit http://tinyurl.com/32a7nx
>>
>>
>> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
>> news:1964E3F9-6950-4651-B6D3-F832F1C157A8@microsoft.com...
>> > Michael,
>> >
>> > First, thank you for trying to help. Thought I would pass this on to
>> > you
>> > for reference. I have tried every which way to write a CD in PP 2007
>> > that
>> > opens immediately in full screen mode when you insert the CD. I tried
>> > the
>> > method you mentioned and the results were the same. When I ran the CD
>> > it
>> > opened in a file. I had to click on the presentation and then it
>> > opened
>> > in
>> > PowerPoint instead of the full screen/viewer mode. I tried it a couple
>> > of
>> > times, then tried writing to the CD again, without success. In total
>> > frustration, I installed my old PP 2003 disc and used it exactly as I
>> > had
>> > always done. I used the package for CD and wrote directly to the CD
>> > from
>> > PowerPoint. I put it in the player and, presto!!! It opened in full
>> > screen
>> > mode without a hitch and ran perfectly! I am convinced that there is a
>> > problem in PP 2007. Who can I write to at Microsoft about this issue?
>> > Thank
>> > you.
>> >
>> > "Michael Koerner" wrote:
>> >
>> >> To be honest, I have never used the copy to CD option direct. I've
>> >> always
>> >> used the copy to folder and then burnt the files to the CD. Only
>> >> because
>> >> I've heard stories using just the copy to CD option where links
>> >> break,
>> >> and
>> >> all files not copied to the CD
>> >>
>> >> --
>> >> Michael Koerner
>> >> MS MVP - PowerPoint
>> >>
>> >>
>> >> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
>> >> news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
>> >> Thank you, I will try that. I have been using the Publish option and
>> >> selecting the Copy to CD option, which I thought should accomplish
>> >> the
>> >> same
>> >> thing with fewer steps. Are you saying that the Copy to CD does not
>> >> work
>> >> the same as copying to a folder?
>> >>
>> >> "Michael Koerner" wrote:
>> >>
>> >> > It works the same way as 2003. Use the Publish option and select the
>> >> > copy
>> >> > to
>> >> > folder option, then burn all the created files to your CD
>> >> >
>> >> > --
>> >> > Michael Koerner
>> >> > MS MVP - PowerPoint
>> >> >
>> >> >
>> >> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
>> >> > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
>> >> > In PP 2003 when you used the pack and go for CD's the burned CD
>> >> > would
>> >> > outo-run, opening in FULL SCREEN, as soon as you popped it into the
>> >> > CD
>> >> > drive.
>> >> > I can't seem to make the 2007 Package for CD act the same way.
>> >> > Instead,
>> >> > when you pop the recorded CD into the drive it opens in the explorer
>> >> > window
>> >> > and you have to make a selection. This does not work for my
>> >> > purposes.
>> >> > I
>> >> > am
>> >> > using it as a handout/mailer and need it to run immediately. Also,
>> >> > only
>> >> > a
>> >> > couple of the files actually burned to the CD. It was a new CD-R.
>> >> > I
>> >> > tried
>> >> > it on another cd from my new vist laptop and it copied ok but did
>> >> > not
>> >> > outrun.
>> >> > ANy help would be appreciated. See second post for another PP 2007
>> >> > problem.
>> >> > Thanks
>> >> >
>> >> >
>> >> >
>> >>
>> >>
>> >>
>>
>>


Re: 2007 Package for CD VS 2003 Pack and Go by Michael

Michael
Thu Oct 09 06:57:39 CDT 2008

Like Echo says, just drag the files and not the folder. Should have
mentioned that in the beginning.

--
Michael Koerner
MS MVP - PowerPoint


"JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
news:1964E3F9-6950-4651-B6D3-F832F1C157A8@microsoft.com...
Michael,

First, thank you for trying to help. Thought I would pass this on to you
for reference. I have tried every which way to write a CD in PP 2007 that
opens immediately in full screen mode when you insert the CD. I tried the
method you mentioned and the results were the same. When I ran the CD it
opened in a file. I had to click on the presentation and then it opened in
PowerPoint instead of the full screen/viewer mode. I tried it a couple of
times, then tried writing to the CD again, without success. In total
frustration, I installed my old PP 2003 disc and used it exactly as I had
always done. I used the package for CD and wrote directly to the CD from
PowerPoint. I put it in the player and, presto!!! It opened in full screen
mode without a hitch and ran perfectly! I am convinced that there is a
problem in PP 2007. Who can I write to at Microsoft about this issue?
Thank
you.

"Michael Koerner" wrote:

> To be honest, I have never used the copy to CD option direct. I've always
> used the copy to folder and then burnt the files to the CD. Only because
> I've heard stories using just the copy to CD option where links break,
> and
> all files not copied to the CD
>
> --
> Michael Koerner
> MS MVP - PowerPoint
>
>
> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
> Thank you, I will try that. I have been using the Publish option and
> selecting the Copy to CD option, which I thought should accomplish the
> same
> thing with fewer steps. Are you saying that the Copy to CD does not work
> the same as copying to a folder?
>
> "Michael Koerner" wrote:
>
> > It works the same way as 2003. Use the Publish option and select the
> > copy
> > to
> > folder option, then burn all the created files to your CD
> >
> > --
> > Michael Koerner
> > MS MVP - PowerPoint
> >
> >
> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
> > In PP 2003 when you used the pack and go for CD's the burned CD would
> > outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
> > drive.
> > I can't seem to make the 2007 Package for CD act the same way.
> > Instead,
> > when you pop the recorded CD into the drive it opens in the explorer
> > window
> > and you have to make a selection. This does not work for my purposes.
> > I
> > am
> > using it as a handout/mailer and need it to run immediately. Also,
> > only
> > a
> > couple of the files actually burned to the CD. It was a new CD-R. I
> > tried
> > it on another cd from my new vist laptop and it copied ok but did not
> > outrun.
> > ANy help would be appreciated. See second post for another PP 2007
> > problem.
> > Thanks
> >
> >
> >
>
>
>



Re: 2007 Package for CD VS 2003 Pack and Go by JoanInGA

JoanInGA
Thu Oct 09 11:02:01 CDT 2008

No problem, Michael. Appreciate the help from both of you.

"Michael Koerner" wrote:

> Like Echo says, just drag the files and not the folder. Should have
> mentioned that in the beginning.
>
> --
> Michael Koerner
> MS MVP - PowerPoint
>
>
> "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> news:1964E3F9-6950-4651-B6D3-F832F1C157A8@microsoft.com...
> Michael,
>
> First, thank you for trying to help. Thought I would pass this on to you
> for reference. I have tried every which way to write a CD in PP 2007 that
> opens immediately in full screen mode when you insert the CD. I tried the
> method you mentioned and the results were the same. When I ran the CD it
> opened in a file. I had to click on the presentation and then it opened in
> PowerPoint instead of the full screen/viewer mode. I tried it a couple of
> times, then tried writing to the CD again, without success. In total
> frustration, I installed my old PP 2003 disc and used it exactly as I had
> always done. I used the package for CD and wrote directly to the CD from
> PowerPoint. I put it in the player and, presto!!! It opened in full screen
> mode without a hitch and ran perfectly! I am convinced that there is a
> problem in PP 2007. Who can I write to at Microsoft about this issue?
> Thank
> you.
>
> "Michael Koerner" wrote:
>
> > To be honest, I have never used the copy to CD option direct. I've always
> > used the copy to folder and then burnt the files to the CD. Only because
> > I've heard stories using just the copy to CD option where links break,
> > and
> > all files not copied to the CD
> >
> > --
> > Michael Koerner
> > MS MVP - PowerPoint
> >
> >
> > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> > news:881BDBFE-8512-4597-8F4A-D37E32BD75DC@microsoft.com...
> > Thank you, I will try that. I have been using the Publish option and
> > selecting the Copy to CD option, which I thought should accomplish the
> > same
> > thing with fewer steps. Are you saying that the Copy to CD does not work
> > the same as copying to a folder?
> >
> > "Michael Koerner" wrote:
> >
> > > It works the same way as 2003. Use the Publish option and select the
> > > copy
> > > to
> > > folder option, then burn all the created files to your CD
> > >
> > > --
> > > Michael Koerner
> > > MS MVP - PowerPoint
> > >
> > >
> > > "JoanInGA" <JoanInGA@discussions.microsoft.com> wrote in message
> > > news:0CD9B4E0-7382-4CA1-94CB-80C838E6C3D3@microsoft.com...
> > > In PP 2003 when you used the pack and go for CD's the burned CD would
> > > outo-run, opening in FULL SCREEN, as soon as you popped it into the CD
> > > drive.
> > > I can't seem to make the 2007 Package for CD act the same way.
> > > Instead,
> > > when you pop the recorded CD into the drive it opens in the explorer
> > > window
> > > and you have to make a selection. This does not work for my purposes.
> > > I
> > > am
> > > using it as a handout/mailer and need it to run immediately. Also,
> > > only
> > > a
> > > couple of the files actually burned to the CD. It was a new CD-R. I
> > > tried
> > > it on another cd from my new vist laptop and it copied ok but did not
> > > outrun.
> > > ANy help would be appreciated. See second post for another PP 2007
> > > problem.
> > > Thanks
> > >
> > >
> > >
> >
> >
> >
>
>
>