Focus of an object
I would like to know as I verify if an object of my screen
has the focus. For example, I have a EditBox, and I would
like to know in one definitive event, if this object is
with the focus. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65563
Prohibiting uninstall during Hardware Reset on PDA...
Dear all,
Is it possible that the applications that are installed into PDA
[Pocket PC 2003] using CabWiz-made CABs do not get uninstalled when
there is Hardware Reset done on PDA?
Also, are there any techniques to store the configurations of PDAs so
that those could be reused after Hardware Resets ?
Can you point to articles for possible techniques?
Thanks for your time.
- Kedar Agarkar Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65555
How to use ActivateDevice and DeactivateDevice in eVC
Hi,
I need some sample code to know how to use the ActivateDevice and
DeactivateDevice functions because I want to disable the SD card slot in the
PDA. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65553
keyboard driver with layout manager
I am reading platform builder 4.2 help keyboard driver section.
I need to migrate PPC2002 keyboard driver to PPC2003 keyboard with
using layout manager.
I have already succeeded migrating without using layout manager.
I found section explains that. but I cannot understand some sentences.
"Perform all of the steps below in the file that contains the Windows
CE .NET 4.1 implementation of the DllMain entry point."
DllMain function is in laymgr.cpp in public directory. This means we
should define another DllMain in platform directory?
"In this dirs file, the PDD is not contained in the PDDList directory
or the directories that contain the information to build the
individual dynamic-link libraries (DLLs) for your keyboard driver."
Our PPC2002 keyboard driver code doesn't have PDDList directory though
I see it in S2440 BSP. What is PDDList directory and is this
necessary?
Please answer
Thanks
Follow-up is limited to microsoft.public.pocketpc.developer
--
Remove '.n0zpam' to send e-mail to me. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65551
Platform specific?
Does eVB 3.0 support WinCE 3.0 on MIPS platform?
I have a Casio machine but cannot install an application on it.
When I make an application using "Install Wizard", only ARM and I486
platform can be selected.
How can I make the application runs on MIPS?
Micent Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65550
Re: Evb application cant run on ppc2002
"SAQ" <xerobyte@hotmail.com> wrote in message news:...
> i m face the problem with EVB application when run on ppc2002. only the
> ppc2002 emulator is run. no appliction write in EVB run.
>
> hardward device is must when we use ppc2002
>
> on ppc 2000 application is run and do they task
>
> i m using embedded visual tools ver 3.0
> with OS is XP professional.
>
>
>
> Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65546
Prevent my program to be stopped (Pocket PC 2003)
Hi,
I would like to know in eVC++ how I do I prevent my program to be stopped by
pressing the Stop button in the "Running Program List". Do I need to
subscribe any windows messages to be notified?!
Thanks Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65544
Pocket PC 2003 emulator storage card folder sharing
I've found several references to "folder sharing" in the 2003 emulator
to act as a storage device, but the options are not in the emulator to
do so.
Anyone know how to do this?
-Scott Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65541
Evb application cant run on ppc2002
i m face the problem with EVB application when run on ppc2002. only the
ppc2002 emulator is run. no appliction write in EVB run.
hardward device is must when we use ppc2002
on ppc 2000 application is run and do they task
i m using embedded visual tools ver 3.0
with OS is XP professional. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65540
Remote control of a Pocket PC 2003 device?
I hope I'm wording this correctly.
I'd like to have the ability to control a Pocket PC device from my
desktop.
Something like a PC Anywhere client for Pocket PC?
It would be helpful for a few development tasks I have.
Any advice?
Thanks,
-Scott Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65539
How to add link to Contacts to Desktop (Today Screen)?
How can I add a link to Contacts to my Pocket PC desktop (the Today screen).
In Settings | Today | Items I can see a defined list of items which will or
will not appear, depending on whether I have them checked. However, I don't
see any way to add an additional application to this list. Is this natively
supported by the OS (MS Pocket PC 3.0.12039) or will I need to develop a
program for this?
If programming is necessary, where can I find out more information on how to
develop programs for the Pocket PC in general, and how to accomplish this
task in particular?
Thanks for your help!
- Joe Geretz - Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65537
Does Merge replication with CE supported in SQL server 7.0?
Hello all,
I want to use SQL Server for CE to synchronize the data in pocket
pc with SQL server. The pocket pc is not always online so I plan to
keep a database snapshot copy in pocket pc instead of post the TSQL
command to server. While the solution is confirmed, now I concern the
versioning of SQL server. Does the SQL server 7.0 support such
feature? Does the communication channel between SQL 7 and SQL server
2000 for CE exist?
Thank you very much.
Jeff Chan. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65536
.net control hWnd
is there a way to get the handle of a control in .net cf? i've been trying
to use the getfocus api to return the hWnd but i get a system.notsupported
exception. anyone have other ideas?
thx,
steve Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65528
Constants used with the INF file.
On a 2002 device, It appears that %CE17% refers to the Start Menu, whereas
on a 2003 device, it refers to the Program Groups.
Has anyone seen this?
Thanks,
Ron Earley Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65526
how can I let FileExplore show extension of file?
Also how can I let it show the hidden files (eg. the driver files) to me? I
can explore them via the browse function of ActiveAsync, but I do like to
know how can I do that with my PocketPC only. Thanks. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65520
.net cf equivalent
what's the .net cf equivalent of sendmessage? pocket pc 2002 is the os.
tia,
steve Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65519
SqlCeReplication property values for replicating a SQL Server db via IIS using VS.NET 2003 -
in order to create the database for my PPC, all of the following have to be
correct for the replication process to work;
oRpl = new SqlCeReplication();
oRpl.Publisher = "";
oRpl.PublisherLogin = "";
oRpl.PublisherPassword = "";
oRpl.InternetUrl = "http://PPC_db_shuttle/sscesa20.dll";
oRpl.InternetLogin = "";
oRpl.InternetPassword = "";
oRpl.Subscriber = "";
oRpl.Publication = "";
oRpl.PublisherDatabase = ""
is there a "paint by number" kind of explanation for each of the properties
above? SQLServerCE online help isn't very helpful. Like this;
"The PublisherLogin property specifies the login name used when connecting
to the Publisher."
O.K?? !!!
or
"The InternetPassword property specifies the Microsoft® Internet Information
Services (IIS) password used when connecting to the SQL Server CE Server
Agent."
and where do I find this?? !!
A picture would be so so helpful for each one of these properties eg. a
screenshot from Enterprise Manager or IIS as appropriate.
That would be HUGE ly helpful.
I have read some very helpful knowledgebases and explanations but none that
have really helped me on my WinXP Pro dev machine.
I "think" I can guess where to get Publisher and Subscriber ....
and then my confidence drops off sharply after that;
thank you,
-Greg
ps. I posted this previously in the sqlserverce newsgroup but i was given
info that was usefull, but info I already had which gave instructions for
win2k and RDA, and general security concepts, but not specifically for this
replication process. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65518
2003 Emulator Memory Setting Broken?
Supposedly, the Pocket PC 2003 emulator can be invoked from the command
line with a /MemorySize switch that allows the emulator up to 256 MB of
memory. However, Start -> Settings -> System -> Memory indicates "Total
main memory: 43.68 MB" whether I start the emulator with 64 MB memory or
256 MB memory. I also noticed a "Memory" key in the registry for the
Pocket PC 2003 emulator that I tried bumping to 256 from 64.
To see how much memory was available in practice, I wrote a C program
that counts how many 1 MB memory chunks can be allocated in a row. I
was only able to allocate 28 1 MB chunks.
My desktop system is Win2K with over 1280 MB RAM so available memory
should not be an issue. We saw the same behavior on a Windows XP
Professional machine with 512 MB memory.
Is the /MemorySize switch on the Pocket PC 2003 emulator broken or do I
need to try something different?
Thanks,
Mike Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65517
PCMICA device detectionr help
I am developing a driver for a PCMCIA card (not a storage card). The first
thing is to register a key under HK_LOCAL_MACHINE\PCMCIA\Detect\92 for my
driver DLL and the DetectMyDriverentry. And the detect function has the
following format: LPTSTR DetectMyDriver(CARD_SOCKET_HANDLE hSocket, UCHAR
type,LPTSTR key,DWORD keyLen).
The question is: what should I do to determine whether the card is my card?
Thanks. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65510
Application Delivery
I created the .cab file. How can I trigger the device's CAB installer to
autorun my .cab file as soon as I send the .cab file to the device by using
either ActiveSync or network connection. Can someone point me to the right
direction. Thanks in advance. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65506
Ce.NET Vs PPC .Net
Can someone explain the main differences between PPC 2002/3 and Windows
CE.Net.
I've been developing a SQL Server CE based application for PPC2K and now
find I have to port the application over to Windows CE .net but I am
experiencing problems. Specifically I find that many of the methods are
missing in the SQL Server CE dlls such as the Engine.Create for setting the
DB up.
Any help is appreciated. Thanks. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65505
Centralized Exception Handling
Hi,
Is there a way to centralize exception handling by catching untrapped
exception. "ThreadException" event is unfortunately not supported by the
.NET compact framework. Maybe a solution through platform invokes ?
Any help will be appreciated.
Thanks
Greg Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65502
RDA Pull - can anyone tell me what I am doing wrong.
This is a multi-part message in MIME format.
------=_NextPart_000_0012_01C38835.3FDE8DE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
The scenario is as follows:
1.. I installed MSDE 2000 using sql2kdesksp3.exe, with the command:
setup SAPWD=3D"..." SECURITYMODE=3DSQL
2.. I installed SQL Server CE using SQLCE.exe.
c.. I applied the patch sql20sql2ksp3a.exe, to configure IIS.
d.. I downloaded SQL CE to a PocketPC 2002 device,
and successfully migrated an ADOCE program.
e.. I successfully tested the URL http://.../sscesa20.dll, using =
Pocket IE.
f.. But when I try an RDA pull, I get error 29022:
The version of the Microsoft OLEDB Provider for SQL Server is not =
correct.
g.. ODBC says that the version of SQL Server is 2000.81.9041.40
My code is:
Private Const SDF As String =3D _
"Data Source=3D\My Documents\....sdf"
Private Const SQL As String =3D _
"Driver=3D{SQL =
Server};Server=3D...;UID=3Dsa;Password=3D...;Database=3Dmaster"
Private Sub Form_Activate()
Dim RDA As SSCE.RemoteDataAccess
Set RDA =3D CreateObject("SSCE.RemoteDataAccess.2.0")
=20
RDA.InternetURL =3D "http://...dll"
RDA.LocalConnectionString =3D SDF
RDA.InternetLogin =3D ""
RDA.InternetPassword =3D ""
=20
On Error Resume Next
=20
RDA.Pull "PRODUCTS", "select ProductID, Description from PRODUCTS", =
SQL
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.520 / Virus Database: 318 - Release Date: 18/09/03
------=_NextPart_000_0012_01C38835.3FDE8DE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1226" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial>The scenario is as follows:</FONT></DIV>
<OL>
<LI><FONT face=3DArial>I installed MSDE 2000 using =
sql2kdesksp3.exe, with=20
the command:</FONT><FONT face=3DArial><BR>setup SAPWD=3D"<I>...</I>"=20
SECURITYMODE=3DSQL</FONT></LI>
<LI><FONT face=3DArial size=3D2><FONT size=3D3>I installed SQL Server =
CE using=20
SQLCE.exe.</FONT></LI>
<LI><FONT face=3DArial size=3D3>I applied the =
patch sql20sql2ksp3a.exe,=20
to configure IIS.</FONT></LI>
<LI><FONT size=3D3>I downloaded SQL CE to a PocketPC 2002 =
device,<BR>and=20
successfully migrated an ADOCE program.</FONT></LI>
<LI><FONT size=3D3>I successfully tested the URL =
http://.../sscesa20.dll, using=20
Pocket IE.</FONT></LI>
<LI><FONT size=3D3>But when I try an RDA pull, I get error=20
<STRONG>29022</STRONG>:<BR>The version of the Microsoft OLEDB Provider =
for SQL=20
Server is not correct.</FONT></LI>
<LI><FONT size=3D3>ODBC says that the version of SQL Server is=20
2000.81.9041.40</FONT></LI></OL>
<DIV><FONT size=3D3>My code is:</FONT></DIV>
<DIV><BR><FONT size=3D3>Private Const SDF As String =3D _<BR>"Data =
Source=3D\My=20
Documents\....sdf"</FONT></DIV>
<DIV><FONT size=3D3></FONT> </DIV>
<DIV><FONT size=3D3>Private Const SQL As String =3D _<BR>"Driver=3D{SQL=20
Server};Server=3D...;UID=3Dsa;Password=3D...;Database=3Dmaster"</FONT></D=
IV>
<DIV><FONT size=3D3></FONT> </DIV>
<DIV><FONT size=3D3>Private Sub Form_Activate()<BR> Dim RDA As=20
SSCE.RemoteDataAccess</FONT></DIV>
<DIV><FONT size=3D3></FONT> </DIV>
<DIV><FONT size=3D3> Set RDA =3D=20
CreateObject("SSCE.RemoteDataAccess.2.0")<BR> <BR> =
RDA.InternetURL =3D=20
"http://...dll"<BR> RDA.LocalConnectionString =3D SDF<BR> =20
RDA.InternetLogin =3D ""<BR> RDA.InternetPassword =3D ""<BR> =
<BR> =20
On Error Resume Next<BR> <BR> RDA.Pull "PRODUCTS", "select=20
ProductID, Description from PRODUCTS", SQL<BR></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><BR>---<BR>Outgoing mail is certified Virus Free.<BR>Checked by AVG =
anti-virus system (<A=20
href=3D"http://www.grisoft.com">http://www.grisoft.com</A>).<BR>Version: =
6.0.520 /=20
Virus Database: 318 - Release Date: =
18/09/03</FONT></FONT></DIV></BODY></HTML>
------=_NextPart_000_0012_01C38835.3FDE8DE0-- Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65501
LandScape Mode for PocketPC
I was wondering if there is a simple way to allow my pocket pc application
to display a gridbox/winform in "landscape" mode so that I can turn the
entire pocket pc on its side in order to view the data. I downloaded a cool
app that plays golf and utilizes this concept of rotating the entire screen
to landscape mode, so I know it's possible...
Any suggestions would be appreciated!
Thanks! Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65499
very basic SQL CE question
I'm just looking at creatintg a simple PPC database (as opposed to text
files I currently use)
Can I download the SQL CE and use in with evc3/4 without any extras ?
Or is my only choice the 'properties' database methods talked about in some
books
TIA
Andrew Kennard Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65498
RTC/RTP
Hi everyone,
Where is the real time protocol in VB.net CF?
regards Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65493
Heap fragmentation results in memory leaks?
Hi,
I'm using PPC2002 version 3.0.11171 on iPaq,
My app does many small allocations, then frees them and reallocates,
I've written a testing program for monitoring the heap's state:
void* pA = new BYTE[10];
void* pB = new BYTE[10];
void* pC = new BYTE[10];
Heap's state:
00090000 18 Fixed
00090018 18 Fixed
00090030 18 Fixed
...
000921E8 E18 Free
Then I called delete() and again pB = new BYTE[10];
Heap's state:
00090000 18 Fixed
00090018 18 Free
00090030 18 Fixed
...
000921E8 18 Fixed
00092200 E00 Free
I can see that the allocation was done not in the 'freed up' place, but in
another place,
Is this behavior might lead to leaks, as the heap might grow?
Thanks,
Ziv Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65492
Determine connected device.
A question about ActiveSync and the registry
Is it possible by reading from the registry to determine
if there currently is a connected device. And if so also
find out its DeviceID for its partnership.
The only reg-value I have found is "Last Device", but it
is not updated until the ActiveSync manager is shut down.
Thanks,
/Jonas Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65491
any graph library for Pocket PC?
I want a graph which can draw data array, zoom in/out,
etc. Is there any graph library exsisted for Pocket PC? Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65490
Can't set single precision font size.
Hi,
I am trying to set a label font size to 8.25
but the objects gets only 8. I tried
from 8 to 9 stepping with 0.01 and nothing!
(VS.NET 2003, VB Smart Device Application)
Can you help me please.
Thanks,
Rafael Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65489
Postal Lottery: Turn $6.00 Into 60.000 In 90 Days
Postal Lottery: Turn $6 into $60,000 in 90 days,=20
GUARANTEED
I found this in a news group and decided to try it. A=20
little while
back, I was browsing through newsgroups, just like you=20
are now and
came across a message just like this that said you could=20
make
thousands of dollars within weeks with only an initial=20
investment of
$6.00!!!=20
So I thought yeah right, this must be a scam!!! But like=20
most of us, I
was curious, so I kept reading. Anyway, it said that you=20
send $1.00 to
each of the 6 names and addresses stated in the message.=20
You then
place your own name and address at the bottom of the list=20
at #6 and
post the message in at least 200 news groups. (There are=20
thousands to
choose from). No catch, that was it.
So after thinking it over, and talking to a few people=20
first. I
thought about trying it. I figured, what have I got to=20
lose except 6
stamps and $6.00, right? So I invested the measly=20
$6.00!!! Guess what?
Within 7 days I started getting money in the mail!!! I=20
was shocked!!!
I figured it would end soon, but the money just kept=20
coming in!!! In
my first week, I had made about $25.00. By the end of the=20
second week,
I had made a total of over $1,000.00!!! In the third=20
week, I had over
$10,000.00 and it is still growing!!! This is now my=20
fourth week and I
have made a total of just over $42,000.00 and it is still=20
coming in
rapidly!!! It's certainly worth $6.00 and 6 stamps!!! I=20
have spent
more than that on the lottery!!!=20
Let me tell you how this works and most importantly, why=20
it works!!!=20
Also, make sure you print a copy of this message now. So=20
you can get
the information off of it as you need it. I promise you=20
that if you
follow the directions exactly, that you will start making=20
more money
than you thought possible by doing something so easy!!!=20
Suggestion: Read this entire message carefully!!! (Print=20
it out or
download it.) Follow the simple directions and watch the=20
money come
in!!! It's easy!!! It's legal!!! Your investment is only=20
$6.00 (plus
postage).=20
IMPORTANT: This is not a rip-off!!! It is not=20
illegal!!! ? It is
almost entirely risk free and it really works!!! If all=20
of the
following instructions are adhered to, you will receive=20
extraordinary
dividends!!!=20
Please note: Follow these directions EXACTLY, and=20
$60,000.00 or more
can be yours in 20 to 90 days!!! This program remains=20
successful
because of the honesty and the integrity of the=20
participants!!! Please
continue its success by carefully adhering to the=20
instructions.=20
You will now become part of the mail order business. In=20
this business
your product is not solid or tangible, it is a service.=20
You are in the
business of developing mailing lists. Many large=20
corporations are
happy to pay big bucks for quality lists. However, the=20
money made from
a mailing list is secondary to the income which is made=20
from people
like you and me asking to be included on your mailing=20
list!!!=20
Here are the 4 easy steps to success:-
Step 1:- Get 6 separate pieces of paper and write the=20
following on
each piece of paper.=20
PLEASE PUT ME ON YOUR MAILING LIST
=20
Now get 6 U.S. dollar bills and place ONE inside each of=20
the 6 pieces
of paper so the bills will not be seen through the=20
envelopes (to
prevent mail theft). Next, place one paper in each of the=20
6 envelopes
and seal them, you should now have 6 sealed envelopes.=20
Each with a
piece of paper stating the above phrase, your name and=20
address, and a
$1.00 bill.=20
THIS IS ABSOLUTELY LEGAL!!! YOU ARE REQUESTING A=20
LEGITIMATE SERVICE
AND YOU ARE PAYING FOR IT!!!=20
Like most of us, I was a little skeptical and a little=20
worried about
the legal aspect of it all. So I checked it out with the=20
U.S. Postal
Service and they confirmed that it is indeed legal!!!
Mail the 6 envelopes to the following addresses:-
S. A. Blair
14601 Portland Ave #219
Burnsville, MN 55306=20
D. Kumar
Room 2.36 Burkhardt House
Oxford Place, Victoria Park
M14 5RR Manchester
ENGLAND
T. Perce
11505 Headley Avenue
Cleveland, Oh 44111
T. Beckers
Rijksweg 46
6267AH Cadier en Keer
The Netherlands
J. Eddolls
144 Pursey Drive
Bradley Stoke
Bristol
BS32 8DP
United Kingdom
W.Scott Moniz
2460 Aumakua
Pearl City HI 96782
Step 2:- Now take the #1 name off the list that you see=20
above, move
the other names up (6 becomes 5, 5 becomes 4, etc.) and=20
add your name
as number 6 on the list.=20
Step 3:- Change anything you need to, but try to keep=20
this message as
close to what you see as possible. Now, post your amended=20
message to
at least 200 news groups. I think there are close to=20
24,000 groups!!!
All you need is 200, but remember, the more you post, the=20
more money
you make!!! This is perfectly legal!! If you have any=20
doubts, refer to
Title18 Sec. 1302 & 1341 of the postal lottery laws. Keep=20
a copy of
these steps for yourself and whenever you need money, you=20
can use it
again.
Please remember that this program remains successful=20
because of the
honesty and the integrity of the participants and by=20
their carefully
adhering to the directions!!!=20
Look at it this way. If you are of integrity, the program=20
will
continue and the money that so many others have received=20
will come
your way!!!=20
Note: - You may want to retain every name and address=20
sent to you,
either on your computer or hard copy and keep the notes=20
people send
you. This verifies that you are truly providing a=20
service. Also, it
might be a good Idea to wrap the $1 bills in dark paper=20
to reduce the
risk of mail theft.=20
So, as each post is downloaded and the directions=20
carefully followed,
six members will be reimbursed for their participation as=20
a list
developer with one dollar each. Your name will move up=20
the list
geometrically so that when your name reaches the #1=20
position, you will
be receiving thousands of dollars in cash!!! What an=20
opportunity for
only $6.00!!! ($1.00 for each of the first six people=20
listed above).
Send it now, add your own name to the list and your in=20
business!!!
DIRECTIONS FOR HOW TO POST TO A NEWS GROUP!!!
Step 1:- You do not need to re-type this entire message=20
to do your own
posting. Simply put your cursor at the beginning of this=20
message and
drag your cursor to the bottom of this message and select=20
copy from
the edit menu. This will copy the entire message into the=20
computer
memory.
Step 2:- Open a blank note pad file and place your cursor=20
at the top
of the blank page. From the edit menu select paste. This=20
will paste a
copy of the message into notepad so that you can add your=20
name to the
list.
Step 3:- Save your new notepad file as a txt file. If you=20
want to do
your posting in a different setting, you'll always have=20
this file to
go back to.
Step 4:- Use Netscape or Internet Explorer and try=20
searching for
various news groups (on-line forums, message boards, chat=20
sites,
discussions, etc.)=20
Step 5:- Visit these message boards and post this message=20
as a new
message by highlighting the text of this message from=20
your notepad and
selecting paste from the edit menu. Fill in the subject,=20
this will be
the header that everybody sees as they scroll through the=20
list of
postings in a particular group. Click the post message=20
button. You've
done your first one! Congratulations!!! All you have to=20
do is jump to
different news groups and post away, after you get the=20
hang of it, it
will take about 30 seconds for each news group!
REMEMBER, THE MORE NEWS GROUPS YOU POST IN, THE MORE=20
MONEY YOU WILL
MAKE!!! (But you have to post a minimum of 200).
That's it!!! You will begin receiving money from around=20
the world
within days!!! You may eventually want to rent a P.O. Box=20
due to the
large amount of mail you will receive. If you wish to=20
stay anonymous,
you can invent a name to use, as long as the postman will=20
deliver it.
JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT!!!=20
Now the why part. Out of 200 postings, say you receive=20
only 5 replies
(a very low example). So then you made $5.00 with your=20
name at #6 on
the letter. Now, each of the 5 persons who sent you $1.00=20
make the
minimum 200 postings, each with your name at #5 and only=20
5 persons
respond to each of the original 5, that is another $25.00=20
for you. Now
those 25 each make 200 MINIMUM posts with your name at #4=20
and only 5
replies each, you will bring in an additional $125.00!!!=20
Now, those
125 persons turn around and post the minimum 200 with=20
your name at #3
and only receive 5 replies each, you will make an=20
additional
$625.00!!! OK, now here is the fun part, each of those=20
625 persons
post a minimum 200 messages with your name at #2 and they=20
each only
receive 5 replies, that
just made you $3,125.00!!! Those 3,125 persons will all=20
deliver this
message to 200 news groups. If just 5 more reply you will=20
receive
$15,625.00!!! All with an original investment of only=20
$6.00!!! Amazing
isn't it!!!! When your name is no longer on the list, you=20
just take
the latest posting in the news groups and send out=20
another $6.00 to
the names on the list, putting your name at number 6=20
again.
You must realize that thousands of people all over the=20
world are
joining the internet and reading these messages every=20
day!!! Just like
you are now!!! So, can you afford $6.00 and see if it=20
really works?
I'm glad I did!!! People have said, "what if the plan is=20
played out
and no one sends you the money?" So what!!! What are the=20
chances of
that happening, when there are tons of new honest users=20
and new honest
people who are joining the internet and news groups=20
everyday and are
willing to give it a try? Estimates are at 20,000 to=20
50,000 new users,
every day!!!
REMEMBER PLAY HONESTLY AND FAIRLY AND THIS WILL REALLY=20
WORK!!!
-- Comments/Feedback (please post your=20
feedback/experiences here) --
Not bad for 1 hr's work....made me around $5320 in=20
roughly 35 days
Anthony M - TX
Hello, I rcvd 269 bucks in the post in 2 weeks.
Dan Miami - FL
I had to wait around 10 days before I had any results -=20
$13,450 as of
3rd Jan 2003 to date (14th Feb 2003).Am gonna re-post it=20
again for
more money!!
Del from Alberta - Canada
Only received around =A3588 in the post the last 2 months=20
since I
started the program but I'd posted to approx. 100=20
newsgroups.
James P - Manchester, UK
Cool....didn't expect much out of this "scam" initially=20
but I have pay
my credit card bill
Mustafa - Jordan
For $6,I made $246 in 2 weeks
ROMEO2326 - Little Rock, AR -US of A=20
Hey, just droppin a line to say that after posting to=20
well over 820
newsgroups on google and my ISP newsgroup server over a=20
period of 4
1/2 months ,Ive raked in $54280 . Mucho dinero baby!!!! =20
Peace.
Drew Dallas - TX Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65487
Creating ADOCE Objects with JScript
Hello everyone
I would like to have access to a database in my pocket PC via an html page
(wich also is located on the same Pocket PC). I have written the following
simple page that tries to create an
ADOCE.Connection.3.0 (or 3.1) object, to show the problem I get:
<html>
<head>
<title></title>
<script language="JScript">
function OpenDB()
{
var con;
alert('inside the function');
con = new ActiveXObject('ADOCE.Connection.3.1');
}
</script>
</head>
<body>
<input type="button" onClick="OpenDB();">
</body>
</html>
When I load this page in the web Browser of my pocket PC and Press the
button displayed, the onClick event fires (I can see the messagebox with
the text 'Inside the function'. Then I press OK and the webbrowser tries to
create the ADOCE connection object, but it displays the following error :
" Microsoft JScript runtime error
Line: 6 character:1
Error: Automation server cannot create the object "
The odd thing is that I have a similar code writen with eVB 3.0 and it works
just fine.
The same happens if I try to create a ADOCE recordset object or a filesystem
object. Maybe there is some kind of registry setting I have to set to allow
automation objects to be created
Any ideas as to how to solve this?
I have MS Pocket PC 3.0 installed on my fujitsu Pocket Loox device.
Thank you in advance for any reply
Antonio Miguel Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65483
Toolkit visual basic to evb3
i have a project with visual basic toolkit for vb6
now i use the same project with evb 3.0
after its installation with new tools of the program .vb on pocket pc
I have noticed that is much slowest one than that one realized with toolkit
for vb6
Cordiali saluti
Luigi Galdi Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65482
menubar wierdness
Hi all,
Ive got a slightly strange problem with a dynamically created menubar. I use
a minimal menu from the resource file, and create it using SHCreateMenuBar,
and then use the following code to add a couple more menus to the bar:
HMENU hMenu1 = CreatePopupMenu();
AppendMenu(hMenu1, MF_ENABLED | MF_STRING, 1001, TEXT("1one"));
AppendMenu(hMenu1, MF_ENABLED | MF_STRING, 1002, TEXT("1two"));
AppendMenu(hMenu1, MF_ENABLED | MF_STRING, 1003, TEXT("1three"));
HMENU hMenu2 = CreatePopupMenu();
AppendMenu(hMenu2, MF_ENABLED | MF_STRING, 1004, TEXT("2one"));
AppendMenu(hMenu2, MF_ENABLED | MF_STRING, 1005, TEXT("2two"));
AppendMenu(hMenu2, MF_ENABLED | MF_STRING, 1006, TEXT("2three"));
PTBBUTTON tbb1 = new TBBUTTON;
PTBBUTTON tbb2 = new TBBUTTON;
tbb1->iBitmap = I_IMAGENONE;
tbb1->fsState = TBSTATE_ENABLED;
tbb1->fsStyle = TBSTYLE_DROPDOWN |0x0080| TBSTYLE_AUTOSIZE;
tbb1->iString = (int)(TEXT("ONE"));
tbb1->dwData = (DWORD)(hMenu1);
tbb2->iBitmap = I_IMAGENONE;
tbb2->fsState = TBSTATE_ENABLED;
tbb2->fsStyle = TBSTYLE_DROPDOWN |0x0080| TBSTYLE_AUTOSIZE;
tbb2->iString = (int)(TEXT("TWO"));
tbb2->dwData = (DWORD)(hMenu2);
::SendMessage(hMenuBar, TB_INSERTBUTTON, 0, (LPARAM)tbb1);
::SendMessage(hMenuBar, TB_INSERTBUTTON, 0, (LPARAM)tbb2);
BUT both menu "ONE" and menu "TWO" display the same popup menu (2one, 2two,
2three).
Anyone got any ideas what I am doing wrong?
TIA
Mark Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65481
Help needed on RAS
Hi
Below is the code snippet I have written for PocketPC device to connect to
the RAS services in Win NT/2000. This code is working perfectly in PPC
2000/2002 devices. Recently, I ported this code to PPC2003 and compiled it
using eVC4.0. I test the code using the HP2210 device but it does not work
properly. I tried many times connecting to the RAS services but not every
attempt is successful. The error value return from RasDial() function is
619. I have never encountered this problem using PPC2000/2003 devices.
Do anyone have any ideas how to solve this problem?
Thanks in advance.
Tham
...
...
memset(&recRASDialParams, 0, sizeof(RASDIALPARAMS));
recRASDialParams.dwSize = sizeof(RASDIALPARAMS);
_tcscpy(recRASDialParams.szEntryName, _T("`115200 Default"));
_tcscpy(recRASDialParams.szPhoneNumber, _T(""));
_tcscpy(recRASDialParams.szCallbackNumber, _T(""));
_tcscpy(recRASDialParams.szUserName, _T("user1"));
_tcscpy(recRASDialParams.szPassword, _T("user123"));
_tcscpy(recRASDialParams.szDomain, _T(""));
// Dial to the RAS
dwRes = RasDial(NULL, NULL, &recRASDialParams, 0xFFFFFFFF, NULL,
&hrasconn);
if( dwRes != 0 )
{ // error dial to RAS server
// dwRes is 619 (Port Disconnected)
}
else
{ // connected to RAS server
}
if( hrasconn )
{ RasHangUp(hrasconn);
while (!RasGetConnectStatus(hrasconn, &recRASConnStatus))
{ ::Sleep(0); }
hrasconn = NULL;
}
...
... Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65477
Bluetooth serial CRASH!
Hi everybody,
I wrote a program to connect a serial port Bluetooth device and it worked
perfectly on PocketPC 2002 reading data on COM8 (or other ports).
Now on the IPAQ 2210 with Windows Mobile 2003, it crashes and also the PDA
turns off!
I also tested the connection with Zterm and also Zterm makes the same.
My question is : how to read data from the Bluetooth serial port on Windows
Mobile 2003?
Thanks for help!
Claudio Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65476
registry key
Hello,
How to create a new registry key in the pocket pc registry
using vb.net
Thanks. Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65474
How to detect the full path to a SD memory card?
Using FindFirstFlashCard also finds the flash file stores which are
available on Compaq and Toshiba devices.
Under Pocket PC 2002 it was not possible to open the flash store as a
volume and therefore this method could be used to detect it.
But under Pocket PC 2003, the trick does not work any longer. There i
can open all devices as volumes.
The 2003 functions FindFirstStore and FindNextStore work but the
fields dwDeviceType and dwAttributes are always 0 and do not report
the correct information while deviceName, storeName ... are reportet
correctly!
Any ideas!
... Helmut Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65472
active x and pocket pc
do you know if i can use an active x to connect to a pocket pc . Does active
x have support for sockets or active sync ? If yes could you show me which
classes , methods,interfaces to use or even give me some sample code ?
Thanks Tag: Printing software for PPC ( upto 2003) and WinCE ( including WinCE.net 4.1) Tag: 65471
See this important update from MS Corporation
--hsvprhswvdybrqmpo
Content-Type: multipart/related; boundary="rbeaplunll";
type="multipart/alternative"
--rbeaplunll
Content-Type: multipart/alternative; boundary="cwfoanwm"
--cwfoanwm
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
MS User
this is the latest version of security update, the
"October 2003, Cumulative Patch" update which fixes
all known security vulnerabilities affecting
MS Internet Explorer, MS Outlook and MS Outlook Express
as well as three newly discovered vulnerabilities.
Install now to protect your computer
from these vulnerabilities, the most serious of which could
allow an attacker to run code on your computer.
This update includes the functionality =
of all previously released patches.
System requirements: Windows 95/98/Me/2000/NT/XP
This update applies to:
- MS Internet Explorer, version 4.01 and later
- MS Outlook, version 8.00 and later
- MS Outlook Express, version 4.01 and later
Recommendation: Customers should install the patch =
at the earliest opportunity.
How to install: Run attached file. Choose Yes on displayed dialog box.
How to use: You don't need to do anything after installing this item.
Microsoft Product Support Services and Knowledge Base articles =
can be found on the Microsoft Technical Support web site.
http://support.microsoft.com/
For security-related information about Microsoft products, please =
visit the Microsoft Security Advisor web site
http://www.microsoft.com/security/
Thank you for using Microsoft products.
Please do not reply to this message.
It was sent from an unmonitored e-mail address and we are unable =
to respond to any replies.
----------------------------------------------
The names of the actual companies and products mentioned =
herein are the trademarks of their respective owners.
Copyright 2003 Microsoft Corporation.
--cwfoanwm
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable
<HTML>
<HEAD>
<style type=3D'text/css'>.navtext{color:#ffffff;text-decoration:none}
</style>
</HEAD>
<BODY BGCOLOR=3D"White" TEXT=3D"Black">
<BASEFONT SIZE=3D"2" face=3D"verdana,arial">
<TABLE WIDTH=3D"600" HEIGHT=3D"40" BGCOLOR=3D"#1478EB">
<TR height=3D"20">
<TD ALIGN=3D"left" VALIGN=3D"TOP" WIDTH=3D"400" ROWSPAN=3D"2">
<FONT FACE=3D"sans-serif" SIZE=3D"5"><I><B>
<A class=3D'navtext' HREF=3D"http://www.microsoft.com/"
TITLE=3D"Microsoft Home Site" target=3D"_top">Microsoft</A>
</B></I></FONT>
</TD>
<TD ALIGN=3D"right" VALIGN=3D"MIDDLE" BGCOLOR=3D"Black" NOWRAP>
<FONT color=3D"#ffffff" size=3D1>
<A class=3D'navtext' href=3D'http://www.microsoft.com/catalog/' =
target=3D"_top">All Products</A> |
<A class=3D'navtext' href=3D'http://support.microsoft.com/' =
target=3D"_top">Support</A> |
<A class=3D'navtext' href=3D'http://search.microsoft.com/' =
target=3D"_top">Search</A> |
<A class=3D'navtext' href=3D'http://www.microsoft.com/' target=3D_top>
Microsoft.com Guide</A>
</FONT>
</TD>
</TR>
<TR>
<TD ALIGN=3D"right" VALIGN=3D"BOTTOM" NOWRAP>
<FONT FACE=3D"Verdana, Arial" SIZE=3D1><B>
<A class=3D'navtext' HREF=3D'http://www.microsoft.com/' TARGET=3D" top">
Microsoft Home</A> </B>
</FONT>
</TD>
</TR>
</TABLE>
<IMG SRC=3D"cid:wkoztoc" BORDER=3D"0"><BR><BR>
<TABLE WIDTH=3D"600"><TR><TD><FONT SIZE=3D"2">
MS User<BR><BR>
this is the latest version of security update, the
"October 2003, Cumulative Patch" update which fixes
all known security vulnerabilities affecting
MS Internet Explorer, MS Outlook and MS Outlook Express
as well as three newly discovered vulnerabilities.
Install now to protect your computer
from these vulnerabilities, the most serious of which could
allow an attacker to run code on your computer.
This update includes the functionality =
of all previously released patches.
</FONT></TD></TR>
</TABLE>
<BR><BR>
<TABLE BORDER=3D"1" CELLSPACING=3D"1" CELLPADDING=3D"3" WIDTH=3D"600">
<TR VALIGN=3D"TOP">
<TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:rqmbgfc" =
ALIGN=3D"absmiddle" BORDER=3D"0"> System requirements</B>
</FONT></TD>
<TD NOWRAP><FONT SIZE=3D"1">Windows 95/98/Me/2000/NT/XP</FONT></TD>
</TR>
<TR VALIGN=3D"TOP">
<TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:rqmbgfc" =
ALIGN=3D"absmiddle" BORDER=3D"0"> This update applies to</B>
</FONT></TD><TD NOWRAP>
<FONT SIZE=3D"1">
MS Internet Explorer, version 4.01 and later<BR>
MS Outlook, version 8.00 and later<BR>
MS Outlook Express, version 4.01 and later
</FONT>
</TD>
</TR>
<TR VALIGN=3D"TOP">
<TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:rqmbgfc" =
ALIGN=3D"absmiddle" BORDER=3D"0"> Recommendation</B></FONT></TD>
<TD NOWRAP><FONT SIZE=3D"1">Customers should install the patch =
at the earliest opportunity.</FONT></TD>
</TR>
<TR VALIGN=3D"TOP">
<TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:rqmbgfc" =
ALIGN=3D"absmiddle" BORDER=3D"0"> How to install</B></FONT></TD>
<TD NOWRAP><FONT SIZE=3D"1">Run attached file. =
Choose Yes on displayed dialog box.</FONT></TD>
</TR>
<TR VALIGN=3D"TOP">
<TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:rqmbgfc" =
ALIGN=3D"absmiddle" BORDER=3D"0"> How to use</B></FONT></TD>
<TD NOWRAP><FONT SIZE=3D"1">You don't need to do =
anything after installing this item.</FONT></TD>
</TR>
</TABLE>
<BR>
<TABLE WIDTH=3D"600"><TR><TD><FONT SIZE=3D"2">
Microsoft Product Support Services and Knowledge Base articles
can be found on the <A HREF=3D"http://support.microsoft.com/" =
TARGET=3D"_top">Microsoft Technical Support</A> web site. =
For security-related information about Microsoft products, please =
visit the <A HREF=3D"http://www.microsoft.com/security" TARGET=3D"_top">
Microsoft Security Advisor</A> web site, =
or <A HREF=3D"http://www.microsoft.com/contactus/contactus.asp" =
TARGET=3D"_top">Contact Us.</A>
<BR><BR>
Thank you for using Microsoft products.<BR><BR></FONT>
<FONT SIZE=3D"1">Please do not reply to this message. =
It was sent from an unmonitored e-mail address and we are unable =
to respond to any replies.<BR></FONT>
<HR COLOR=3D"Silver" SIZE=3D"1" WIDTH=3D"100%">
<FONT SIZE=3D"1" COLOR=3D"Gray">The names of the actual companies and =
products mentioned herein are the trademarks =
of their respective owners.</FONT>
</TD></TR></TABLE>
<BR>
<TABLE WIDTH=3D"600" HEIGHT=3D"45" BGCOLOR=3D"#1478EB">
<TR VALIGN=3D"TOP">
<TD WIDTH=3D"5"></TD>
<TD>
<FONT COLOR=3D"#FFFFFF" SIZE=3D"1"><B>
<A class=3D'navtext' HREF=3D"http://www.microsoft.com/=
contactus/contactus.asp" TARGET=3D"_top">Contact Us</A>
|
<A class=3D'navtext' HREF=3D"http://www.microsoft.com/legal/" =
TARGET=3D"_top">Legal</A>
|
<A class=3D'navtext' HREF=3D"https://www.truste.org/validate/605" =
TARGET=3D"_top" TITLE=3D"TRUSTe - Click to Verify">TRUSTe</A>
</FONT></B>
</TD>
</TR>
<TR VALIGN=3D"MIDDLE">
<TD WIDTH=3D"5"></TD>
<TD>
<FONT COLOR=3D"#FFFFFF" SIZE=3D"1">
&c