eddierox today

Ok, here's what's up for today.
It is hereby decreed "eddierox free day"

I'll be working on my computer today.

I'm lapping and polishing a 50mm x 50mm x 1/4" pure
copper cold plate to work in conjunction with a new
sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
Peltier Device and Thermalright SP-94 Heatsink w/Vantec
Stealth 92mm Fan currently only spinning at 1700-1750 RPM.

This is to compliment my new P4 2.8E Prescott Processor.

Using an (unclockable)Intel D865GRH Motherboard, 1 GB of
OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
converted hardrives, BFG Asylum 5900, ThermalTake 420W
w/active power factor control, CDRW, DVDRW, ZIP 250 and
IBM Floppy, 80mm & 92mm Zalman Case Fans barely spinning,
all tucked into a Gateway Stingray Desktop and Gateway
FPD1810 LCD, my current heat ranges are as follows:

Processor Zone:
125F @ idle. 150F+ @ Full Load.
System Zone 1: 99F-108F
System Zone 2: 100F-140F

Although my system is currently virtual noiseless, I have
been unhappy with these heat range figures and thus
some "new blood."
Don't worry, I'll be using Lubrex and DowCorning
Conformer throughout.

Will let you know the results in future rantings.

In addition, I've some reading to do concerning the A+
and MCSA in preperation for exams.

As for today, you all have a "free of eddierox day."
This means you can talk sh*t completely free of any
reprecussion from me.

I'll check up on you from time to time to see what was
said about me just for a chuckle.

With this in mind, commence firing!!!!!!

***YAWN***

Hired
Wed Apr 07 09:28:30 CDT 2004

Is it just me or does this post sound like he's compensating for something?

"eddierox" <anonymous@discussions.microsoft.com> wrote in message
news:1972801c41ca7$17945610$a301280a@phx.gbl...
>
> Ok, here's what's up for today.
> It is hereby decreed "eddierox free day"
>
> I'll be working on my computer today.
>
> I'm lapping and polishing a 50mm x 50mm x 1/4" pure
> copper cold plate to work in conjunction with a new
> sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
> Peltier Device and Thermalright SP-94 Heatsink w/Vantec
> Stealth 92mm Fan currently only spinning at 1700-1750 RPM.
>
> This is to compliment my new P4 2.8E Prescott Processor.
>
> Using an (unclockable)Intel D865GRH Motherboard, 1 GB of
> OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
> converted hardrives, BFG Asylum 5900, ThermalTake 420W
> w/active power factor control, CDRW, DVDRW, ZIP 250 and
> IBM Floppy, 80mm & 92mm Zalman Case Fans barely spinning,
> all tucked into a Gateway Stingray Desktop and Gateway
> FPD1810 LCD, my current heat ranges are as follows:
>
> Processor Zone:
> 125F @ idle. 150F+ @ Full Load.
> System Zone 1: 99F-108F
> System Zone 2: 100F-140F
>
> Although my system is currently virtual noiseless, I have
> been unhappy with these heat range figures and thus
> some "new blood."
> Don't worry, I'll be using Lubrex and DowCorning
> Conformer throughout.
>
> Will let you know the results in future rantings.
>
> In addition, I've some reading to do concerning the A+
> and MCSA in preperation for exams.
>
> As for today, you all have a "free of eddierox day."
> This means you can talk sh*t completely free of any
> reprecussion from me.
>
> I'll check up on you from time to time to see what was
> said about me just for a chuckle.
>
> With this in mind, commence firing!!!!!!
>
> ***YAWN***
>
>

ButtKnubb
Wed Apr 07 09:27:51 CDT 2004

Eddie is a butt sucker.

>-----Original Message-----
>
>Ok, here's what's up for today.
>It is hereby decreed "eddierox free day"
>
>I'll be working on my computer today.
>
>I'm lapping and polishing a 50mm x 50mm x 1/4" pure
>copper cold plate to work in conjunction with a new
>sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
>Peltier Device and Thermalright SP-94 Heatsink w/Vantec
>Stealth 92mm Fan currently only spinning at 1700-1750 RPM.
>
>This is to compliment my new P4 2.8E Prescott Processor.
>
>Using an (unclockable)Intel D865GRH Motherboard, 1 GB of
>OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
>converted hardrives, BFG Asylum 5900, ThermalTake 420W
>w/active power factor control, CDRW, DVDRW, ZIP 250 and
>IBM Floppy, 80mm & 92mm Zalman Case Fans barely spinning,
>all tucked into a Gateway Stingray Desktop and Gateway
>FPD1810 LCD, my current heat ranges are as follows:
>
>Processor Zone:
>125F @ idle. 150F+ @ Full Load.
>System Zone 1: 99F-108F
>System Zone 2: 100F-140F
>
>Although my system is currently virtual noiseless, I have
>been unhappy with these heat range figures and thus
>some "new blood."
>Don't worry, I'll be using Lubrex and DowCorning
>Conformer throughout.
>
>Will let you know the results in future rantings.
>
>In addition, I've some reading to do concerning the A+
>and MCSA in preperation for exams.
>
>As for today, you all have a "free of eddierox day."
>This means you can talk sh*t completely free of any
>reprecussion from me.
>
>I'll check up on you from time to time to see what was
>said about me just for a chuckle.
>
>With this in mind, commence firing!!!!!!
>
>***YAWN***
>
>
>.
>

kpg
Wed Apr 07 09:56:15 CDT 2004

Oh God, I know people like this. All that tech-no babble.
Don't ever let eddie work on your machine. Or drive
your car. Or leave him alone with someone you like.
You know, serial killers are often above average in intelligence.
Tick, tick, tick... anyone around eddide should invest in
body armor.

"eddierox" <anonymous@discussions.microsoft.com> wrote in message
news:1972801c41ca7$17945610$a301280a@phx.gbl...
>
> Ok, here's what's up for today.
> It is hereby decreed "eddierox free day"
>
> I'll be working on my computer today.
>
> I'm lapping and polishing a 50mm x 50mm x 1/4" pure
> copper cold plate to work in conjunction with a new
> sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
> Peltier Device and Thermalright SP-94 Heatsink w/Vantec
> Stealth 92mm Fan currently only spinning at 1700-1750 RPM.
>
> This is to compliment my new P4 2.8E Prescott Processor.
>
> Using an (unclockable)Intel D865GRH Motherboard, 1 GB of
> OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
> converted hardrives, BFG Asylum 5900, ThermalTake 420W
> w/active power factor control, CDRW, DVDRW, ZIP 250 and
> IBM Floppy, 80mm & 92mm Zalman Case Fans barely spinning,
> all tucked into a Gateway Stingray Desktop and Gateway
> FPD1810 LCD, my current heat ranges are as follows:
>
> Processor Zone:
> 125F @ idle. 150F+ @ Full Load.
> System Zone 1: 99F-108F
> System Zone 2: 100F-140F
>
> Although my system is currently virtual noiseless, I have
> been unhappy with these heat range figures and thus
> some "new blood."
> Don't worry, I'll be using Lubrex and DowCorning
> Conformer throughout.
>
> Will let you know the results in future rantings.
>
> In addition, I've some reading to do concerning the A+
> and MCSA in preperation for exams.
>
> As for today, you all have a "free of eddierox day."
> This means you can talk sh*t completely free of any
> reprecussion from me.
>
> I'll check up on you from time to time to see what was
> said about me just for a chuckle.
>
> With this in mind, commence firing!!!!!!
>
> ***YAWN***
>
>

kpg
Wed Apr 07 10:13:02 CDT 2004

Being a professional VB6 programmer I have the
ability to download a VB6 newsgroup reader from
planetsourcecode.com and modify it to allow all
posts through except those from eddierox. Hey,
I can even add spam-like filter settings to exclude
any post in ALL UPPERCASE. Or, if you prefer, I
can simply correct the case to take the edge off
of it (or just go <snip>). The possibilities are
endless. I'm going to work on it in my spare time.
If there is any interest is such a newsreader out
there let me know, and I'll shoot you a copy when
I'm done.

kpg

On a mission to make the world a better place.

Ken
Wed Apr 07 11:19:37 CDT 2004

"kpg" <ipost@thereforeiam.com> wrote in message
news:uYecULLHEHA.3528@TK2MSFTNGP09.phx.gbl...
> Being a professional VB6 programmer I have the
> ability to download a VB6 newsgroup reader from
> planetsourcecode.com and modify it to allow all
> posts through except those from eddierox. Hey,
> I can even add spam-like filter settings to exclude
> any post in ALL UPPERCASE. Or, if you prefer, I
> can simply correct the case to take the edge off
> of it (or just go <snip>). The possibilities are
> endless. I'm going to work on it in my spare time.
> If there is any interest is such a newsreader out
> there let me know, and I'll shoot you a copy when
> I'm done.
>

Don't put any viruses or trojans or any of that horsesh!t in there, and you
can count me in. I'll try anything once.

--

KB - MCNGP "silent thug" #26

first initial last name AT hotmail DOT com

Kat
Wed Apr 07 11:21:26 CDT 2004

PLEASE let me know. I've been playing with a few, trying to create a
"rule" that deletes the message is sent from you know who. Hasn't done
it yet.

Hmm, you aren't charging are you? That would make it logical for YOU to
be eddie...

kpg wrote:

> Being a professional VB6 programmer I have the
> ability to download a VB6 newsgroup reader from
> planetsourcecode.com and modify it to allow all
> posts through except those from eddierox. Hey,
> I can even add spam-like filter settings to exclude
> any post in ALL UPPERCASE. Or, if you prefer, I
> can simply correct the case to take the edge off
> of it (or just go <snip>). The possibilities are
> endless. I'm going to work on it in my spare time.
> If there is any interest is such a newsreader out
> there let me know, and I'll shoot you a copy when
> I'm done.
>
> kpg
>
> On a mission to make the world a better place.
>
>

--
Kat FORMER MCNGP #29

/* Get the facts first. You can distort them later. */

LnkWizard
Wed Apr 07 11:22:04 CDT 2004

"kpg" <ipost@thereforeiam.com> wrote in message
news:uYecULLHEHA.3528@TK2MSFTNGP09.phx.gbl...
> Being a professional VB6 programmer I have the
> ability to download a VB6 newsgroup reader from
> planetsourcecode.com and modify it to allow all
> posts through except those from eddierox. Hey,
> I can even add spam-like filter settings to exclude
> any post in ALL UPPERCASE. Or, if you prefer, I
> can simply correct the case to take the edge off
> of it (or just go <snip>). The possibilities are
> endless. I'm going to work on it in my spare time.
> If there is any interest is such a newsreader out
> there let me know, and I'll shoot you a copy when
> I'm done.
>
> kpg
>
> On a mission to make the world a better place.

Sounds like a winner. Suggested feature is to fix it so that it bottom
posts
----------------------------------------------------------------------------
---
LnkWizard MCNGP 2^5

"He who does not test himself is worthless indeed"
----------------------------------------------------------------------------
---

kpg
Wed Apr 07 11:23:02 CDT 2004

Oh. You want the virus free version.

That costs extra. :)

kpg

"Ken Briscoe" <youcant@sendmespam.com> wrote in message
news:eCmpawLHEHA.2720@TK2MSFTNGP11.phx.gbl...
> "kpg" <ipost@thereforeiam.com> wrote in message
> news:uYecULLHEHA.3528@TK2MSFTNGP09.phx.gbl...
> > Being a professional VB6 programmer I have the
> > ability to download a VB6 newsgroup reader from
> > planetsourcecode.com and modify it to allow all
> > posts through except those from eddierox. Hey,
> > I can even add spam-like filter settings to exclude
> > any post in ALL UPPERCASE. Or, if you prefer, I
> > can simply correct the case to take the edge off
> > of it (or just go <snip>). The possibilities are
> > endless. I'm going to work on it in my spare time.
> > If there is any interest is such a newsreader out
> > there let me know, and I'll shoot you a copy when
> > I'm done.
> >
>
> Don't put any viruses or trojans or any of that horsesh!t in there, and
you
> can count me in. I'll try anything once.
>
> --
>
> KB - MCNGP "silent thug" #26
>
> first initial last name AT hotmail DOT com
>
>

Rowdy
Wed Apr 07 11:29:27 CDT 2004

lol. i can relate. i personally can't be arsed whats in my pc as long as it
boots and i can play a game once in a while. i just keep track of server
hw.



"kpg" <ipost@thereforeiam.com> wrote in news:#vqwBCLHEHA.2872
@tk2msftngp13.phx.gbl:

> Oh God, I know people like this. All that tech-no babble.
> Don't ever let eddie work on your machine. Or drive
> your car. Or leave him alone with someone you like.
> You know, serial killers are often above average in intelligence.
> Tick, tick, tick... anyone around eddide should invest in
> body armor.
>
> "eddierox" <anonymous@discussions.microsoft.com> wrote in message
> news:1972801c41ca7$17945610$a301280a@phx.gbl...
>>
>> Ok, here's what's up for today.
>> It is hereby decreed "eddierox free day"
>>
>> I'll be working on my computer today.
>>
>> I'm lapping and polishing a 50mm x 50mm x 1/4" pure
>> copper cold plate to work in conjunction with a new
>> sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
>> Peltier Device and Thermalright SP-94 Heatsink w/Vantec
>> Stealth 92mm Fan currently only spinning at 1700-1750 RPM.
>>
>> This is to compliment my new P4 2.8E Prescott Processor.
>>
>> Using an (unclockable)Intel D865GRH Motherboard, 1 GB of
>> OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
>> converted hardrives, BFG Asylum 5900, ThermalTake 420W
>> w/active power factor control, CDRW, DVDRW, ZIP 250 and
>> IBM Floppy, 80mm & 92mm Zalman Case Fans barely spinning,
>> all tucked into a Gateway Stingray Desktop and Gateway
>> FPD1810 LCD, my current heat ranges are as follows:
>>
>> Processor Zone:
>> 125F @ idle. 150F+ @ Full Load.
>> System Zone 1: 99F-108F
>> System Zone 2: 100F-140F
>>
>> Although my system is currently virtual noiseless, I have
>> been unhappy with these heat range figures and thus
>> some "new blood."
>> Don't worry, I'll be using Lubrex and DowCorning
>> Conformer throughout.
>>
>> Will let you know the results in future rantings.
>>
>> In addition, I've some reading to do concerning the A+
>> and MCSA in preperation for exams.
>>
>> As for today, you all have a "free of eddierox day."
>> This means you can talk sh*t completely free of any
>> reprecussion from me.
>>
>> I'll check up on you from time to time to see what was
>> said about me just for a chuckle.
>>
>> With this in mind, commence firing!!!!!!
>>
>> ***YAWN***
>>
>>
>
>
>



Rowdy Yates
--
"the man who tried and failed miserably"

Kat
Wed Apr 07 11:29:18 CDT 2004

No, we want top posts. I hate scrolling to the bottom to have read a
response.

LnkWizard wrote:

> "kpg" <ipost@thereforeiam.com> wrote in message
> news:uYecULLHEHA.3528@TK2MSFTNGP09.phx.gbl...
>
>>Being a professional VB6 programmer I have the
>>ability to download a VB6 newsgroup reader from
>>planetsourcecode.com and modify it to allow all
>>posts through except those from eddierox. Hey,
>>I can even add spam-like filter settings to exclude
>>any post in ALL UPPERCASE. Or, if you prefer, I
>>can simply correct the case to take the edge off
>>of it (or just go <snip>). The possibilities are
>>endless. I'm going to work on it in my spare time.
>>If there is any interest is such a newsreader out
>>there let me know, and I'll shoot you a copy when
>>I'm done.
>>
>>kpg
>>
>>On a mission to make the world a better place.
>
>
> Sounds like a winner. Suggested feature is to fix it so that it bottom
> posts
> ----------------------------------------------------------------------------
> ---
> LnkWizard MCNGP 2^5
>
> "He who does not test himself is worthless indeed"
> ----------------------------------------------------------------------------
> ---
>
>

--
Kat FORMER MCNGP #29

/* Get the facts first. You can distort them later. */

kpg
Wed Apr 07 11:33:50 CDT 2004

Bottom posts. Right.

kpg

"LnkWizard" <lnk.wizard.nodots2@hotmail.com> wrote in message
news:edPJ3xLHEHA.3556@TK2MSFTNGP10.phx.gbl...
> "kpg" <ipost@thereforeiam.com> wrote in message
> news:uYecULLHEHA.3528@TK2MSFTNGP09.phx.gbl...
> > Being a professional VB6 programmer I have the
> > ability to download a VB6 newsgroup reader from
> > planetsourcecode.com and modify it to allow all
> > posts through except those from eddierox. Hey,
> > I can even add spam-like filter settings to exclude
> > any post in ALL UPPERCASE. Or, if you prefer, I
> > can simply correct the case to take the edge off
> > of it (or just go <snip>). The possibilities are
> > endless. I'm going to work on it in my spare time.
> > If there is any interest is such a newsreader out
> > there let me know, and I'll shoot you a copy when
> > I'm done.
> >
> > kpg
> >
> > On a mission to make the world a better place.
>
> Sounds like a winner. Suggested feature is to fix it so that it bottom
> posts
> --------------------------------------------------------------------------
--
> ---
> LnkWizard MCNGP 2^5
>
> "He who does not test himself is worthless indeed"
> --------------------------------------------------------------------------
--
> ---
>
>

Rowdy
Wed Apr 07 11:35:56 CDT 2004

you know, in other ng's they go "spaz attack" on you if you top post. only
here is it welcomed. :-)

Kat <misty@No.SPAM.flynt.org> wrote in news:40742c62@obsidian.gov.bc.ca:

> No, we want top posts. I hate scrolling to the bottom to have read a
> response.
>
> LnkWizard wrote:
>
>> "kpg" <ipost@thereforeiam.com> wrote in message
>> news:uYecULLHEHA.3528@TK2MSFTNGP09.phx.gbl...
>>
>>>Being a professional VB6 programmer I have the
>>>ability to download a VB6 newsgroup reader from
>>>planetsourcecode.com and modify it to allow all
>>>posts through except those from eddierox. Hey,
>>>I can even add spam-like filter settings to exclude
>>>any post in ALL UPPERCASE. Or, if you prefer, I
>>>can simply correct the case to take the edge off
>>>of it (or just go <snip>). The possibilities are
>>>endless. I'm going to work on it in my spare time.
>>>If there is any interest is such a newsreader out
>>>there let me know, and I'll shoot you a copy when
>>>I'm done.
>>>
>>>kpg
>>>
>>>On a mission to make the world a better place.
>>
>>
>> Sounds like a winner. Suggested feature is to fix it so that it bottom
>> posts
>>
----------------------------------------------------------------------------
>> ---
>> LnkWizard MCNGP 2^5
>>
>> "He who does not test himself is worthless indeed"
>>
----------------------------------------------------------------------------
>> ---
>>
>>
>



Rowdy Yates
--
"the man who tried and failed miserably"

Neil
Wed Apr 07 11:37:29 CDT 2004

Kat <misty@No.SPAM.flynt.org> wrote in news:40742a88$1@obsidian.gov.bc.ca:

> PLEASE let me know. I've been playing with a few, trying to create a
> "rule" that deletes the message is sent from you know who. Hasn't done
> it yet.
>

xnews...first I have plonked him so anything new is insta-bye-bye and
second the filter options make the old stuff go away....

pretty great for freeware

--
Neil
"you'd do what, to who, for how many biscuits?"

Neil
Wed Apr 07 11:38:37 CDT 2004

"kpg" <ipost@thereforeiam.com> wrote in news:uYecULLHEHA.3528
@TK2MSFTNGP09.phx.gbl:

> Being a professional VB6 programmer I have the
> ability to download a VB6 newsgroup reader from
> planetsourcecode.com and modify it to allow all
> posts through except those from eddierox. Hey,
> I can even add spam-like filter settings to exclude
> any post in ALL UPPERCASE. Or, if you prefer, I
> can simply correct the case to take the edge off
> of it (or just go <snip>). The possibilities are
> endless. I'm going to work on it in my spare time.
> If there is any interest is such a newsreader out
> there let me know, and I'll shoot you a copy when
> I'm done.
>
> kpg
>
> On a mission to make the world a better place.
>
>

I'll give it a go...
(so long as its freeware as I am remarkably cheap)

--
Neil
"you'd do what, to who, for how many biscuits?"

billLASTINIT
Wed Apr 07 11:38:48 CDT 2004

Rowdy Yates wrote:
> you know, in other ng's they go "spaz attack" on you if you top post.
> only here is it welcomed. :-)

It's not welcomed... it's tolerated.

--
Fris "Mr. Patience" bee®

Certaholics
http://groups.yahoo.com/group/certaholics

Rowdy
Wed Apr 07 11:42:47 CDT 2004

yup. i use xnews. very configurable. but if you use oe or netscape. it takes
a bit of getting used to.

;-)

Neil <neilmcse@nospamforyou.com> wrote in
news:Xns94C480602BF8Fneilmcsehotmailcom@207.46.248.16:

> xnews...first I have plonked him so anything new is insta-bye-bye and
> second the filter options make the old stuff go away....
>
> pretty great for freeware



Rowdy Yates
--
"the man who tried and failed miserably"

Rowdy
Wed Apr 07 11:43:37 CDT 2004

Frisbee® <billLASTINIT@dasi-software.com> wrote in news:#fo6O7LHEHA.740
@tk2msftngp13.phx.gbl:

> Rowdy Yates wrote:
>> you know, in other ng's they go "spaz attack" on you if you top post.
>> only here is it welcomed. :-)
>
> It's not welcomed... it's tolerated.
>

i top post 'casue y'all top post.

Rowdy Yates
--
"the man who tried and failed miserably"

eddierox
Wed Apr 07 11:43:22 CDT 2004


Hi All!!!!!!

I went ahead and took an early luncbreak to take a peek
at the Message Board and suffice to say, I'm a little
disappointed at the lack of "enthusiasm."

Sadly, I'm going to go ahead and break my vow of silence
and respond with hopes of "TURNING UP THE VOLUME!!!!!"

See ya back here at 3:00 PM EST.


NO ***YAWNS*** !!!!!!!

Politician
Wed Apr 07 11:45:12 CDT 2004

"Ken Briscoe" <youcant@sendmespam.com> wrote in message
news:eCmpawLHEHA.2720@TK2MSFTNGP11.phx.gbl...
>
> I'll try anything once.
>


Ken, we gotta talk. Seriously man. I'm worried about you.

--
Politician Spock
Thug #24601

Politician
Wed Apr 07 11:44:11 CDT 2004

"kpg" <ipost@thereforeiam.com> wrote in message
news:uYecULLHEHA.3528@TK2MSFTNGP09.phx.gbl...
> Being a professional VB6 programmer I have the
> ability to download a VB6 newsgroup reader from
> planetsourcecode.com and modify it to allow all
> posts through except those from eddierox. Hey,
> I can even add spam-like filter settings to exclude
> any post in ALL UPPERCASE. Or, if you prefer, I
> can simply correct the case to take the edge off
> of it (or just go <snip>). The possibilities are
> endless. I'm going to work on it in my spare time.
> If there is any interest is such a newsreader out
> there let me know, and I'll shoot you a copy when
> I'm done.
>
> kpg
>
> On a mission to make the world a better place.
>
>

eddierox's newsgroup reader is a browser. You try to confuse.

--
Politician Spock
Thug #24601

eddierox
Wed Apr 07 11:45:56 CDT 2004


***YAWN***

>-----Original Message-----
>Eddie is a butt sucker.
>
>>-----Original Message-----
>>
>>Ok, here's what's up for today.
>>It is hereby decreed "eddierox free day"
>>
>>I'll be working on my computer today.
>>
>>I'm lapping and polishing a 50mm x 50mm x 1/4" pure
>>copper cold plate to work in conjunction with a new
>>sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
>>Peltier Device and Thermalright SP-94 Heatsink w/Vantec
>>Stealth 92mm Fan currently only spinning at 1700-1750
RPM.
>>
>>This is to compliment my new P4 2.8E Prescott Processor.
>>
>>Using an (unclockable)Intel D865GRH Motherboard, 1 GB
of
>>OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
>>converted hardrives, BFG Asylum 5900, ThermalTake 420W
>>w/active power factor control, CDRW, DVDRW, ZIP 250 and
>>IBM Floppy, 80mm & 92mm Zalman Case Fans barely
spinning,
>>all tucked into a Gateway Stingray Desktop and Gateway
>>FPD1810 LCD, my current heat ranges are as follows:
>>
>>Processor Zone:
>>125F @ idle. 150F+ @ Full Load.
>>System Zone 1: 99F-108F
>>System Zone 2: 100F-140F
>>
>>Although my system is currently virtual noiseless, I
have
>>been unhappy with these heat range figures and thus
>>some "new blood."
>>Don't worry, I'll be using Lubrex and DowCorning
>>Conformer throughout.
>>
>>Will let you know the results in future rantings.
>>
>>In addition, I've some reading to do concerning the A+
>>and MCSA in preperation for exams.
>>
>>As for today, you all have a "free of eddierox day."
>>This means you can talk sh*t completely free of any
>>reprecussion from me.
>>
>>I'll check up on you from time to time to see what was
>>said about me just for a chuckle.
>>
>>With this in mind, commence firing!!!!!!
>>
>>***YAWN***
>>
>>
>>.
>>
>.
>

eddierox
Wed Apr 07 11:45:32 CDT 2004


Here's the translation:

Oh God,
***YES THATS ME***

I know people like this.
***YOU'RE SUFFERING FROM STOCKHOLM SYNDROME WHERE YOU
BECOME ONE OF THEM***

All that tech-no babble.
***STILL USING KPG JELLY IN YOUR PENTIUM I HUH?***

>Don't ever let eddie work on your machine. Or drive
>your car. Or leave him alone with someone you like.
***COOL!, I NEED THE FREE TIME FOR BETTER THINGS TO DO***

>You know, serial killers are often above average in
intelligence.
*** ONCE AGAIN, SUFFERING FROM STOCKHOLM SYNDROME.
DON'T KID YOURSELF, YOU'VE NO INTELLIGENCE. ***

>Tick, tick, tick... anyone around eddide should invest
in
>body armor.
***THATS BEEN A GIVEN, WHEN DEALING WITH TROLL FLAMERS
SUCH AS YOURSELF HERE.


IS THAT IT????

***YAWN***

>-----Original Message-----
>Oh God, I know people like this. All that tech-no
babble.
>Don't ever let eddie work on your machine. Or drive
>your car. Or leave him alone with someone you like.
>You know, serial killers are often above average in
intelligence.
>Tick, tick, tick... anyone around eddide should invest
in
>body armor.
>
>"eddierox" <anonymous@discussions.microsoft.com> wrote
in message
>news:1972801c41ca7$17945610$a301280a@phx.gbl...
>>
>> Ok, here's what's up for today.
>> It is hereby decreed "eddierox free day"
>>
>> I'll be working on my computer today.
>>
>> I'm lapping and polishing a 50mm x 50mm x 1/4" pure
>> copper cold plate to work in conjunction with a new
>> sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
>> Peltier Device and Thermalright SP-94 Heatsink w/Vantec
>> Stealth 92mm Fan currently only spinning at 1700-1750
RPM.
>>
>> This is to compliment my new P4 2.8E Prescott
Processor.
>>
>> Using an (unclockable)Intel D865GRH Motherboard, 1 GB
of
>> OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
>> converted hardrives, BFG Asylum 5900, ThermalTake 420W
>> w/active power factor control, CDRW, DVDRW, ZIP 250 and
>> IBM Floppy, 80mm & 92mm Zalman Case Fans barely
spinning,
>> all tucked into a Gateway Stingray Desktop and Gateway
>> FPD1810 LCD, my current heat ranges are as follows:
>>
>> Processor Zone:
>> 125F @ idle. 150F+ @ Full Load.
>> System Zone 1: 99F-108F
>> System Zone 2: 100F-140F
>>
>> Although my system is currently virtual noiseless, I
have
>> been unhappy with these heat range figures and thus
>> some "new blood."
>> Don't worry, I'll be using Lubrex and DowCorning
>> Conformer throughout.
>>
>> Will let you know the results in future rantings.
>>
>> In addition, I've some reading to do concerning the A+
>> and MCSA in preperation for exams.
>>
>> As for today, you all have a "free of eddierox day."
>> This means you can talk sh*t completely free of any
>> reprecussion from me.
>>
>> I'll check up on you from time to time to see what was
>> said about me just for a chuckle.
>>
>> With this in mind, commence firing!!!!!!
>>
>> ***YAWN***
>>
>>
>
>
>.
>

eddierox
Wed Apr 07 11:48:09 CDT 2004


IT'S DEFINITELY YOU.
IS THIS THE BEST YOU CAN DO??????
YOU'RE IN NEED OF AN EPIPHANY !!!!

HERE, HAVE SOME TOILET PAPER!!!!

***YAWN***

>-----Original Message-----
>Is it just me or does this post sound like he's
compensating for something?
>
>"eddierox" <anonymous@discussions.microsoft.com> wrote
in message
>news:1972801c41ca7$17945610$a301280a@phx.gbl...
>>
>> Ok, here's what's up for today.
>> It is hereby decreed "eddierox free day"
>>
>> I'll be working on my computer today.
>>
>> I'm lapping and polishing a 50mm x 50mm x 1/4" pure
>> copper cold plate to work in conjunction with a new
>> sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
>> Peltier Device and Thermalright SP-94 Heatsink w/Vantec
>> Stealth 92mm Fan currently only spinning at 1700-1750
RPM.
>>
>> This is to compliment my new P4 2.8E Prescott
Processor.
>>
>> Using an (unclockable)Intel D865GRH Motherboard, 1 GB
of
>> OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
>> converted hardrives, BFG Asylum 5900, ThermalTake 420W
>> w/active power factor control, CDRW, DVDRW, ZIP 250 and
>> IBM Floppy, 80mm & 92mm Zalman Case Fans barely
spinning,
>> all tucked into a Gateway Stingray Desktop and Gateway
>> FPD1810 LCD, my current heat ranges are as follows:
>>
>> Processor Zone:
>> 125F @ idle. 150F+ @ Full Load.
>> System Zone 1: 99F-108F
>> System Zone 2: 100F-140F
>>
>> Although my system is currently virtual noiseless, I
have
>> been unhappy with these heat range figures and thus
>> some "new blood."
>> Don't worry, I'll be using Lubrex and DowCorning
>> Conformer throughout.
>>
>> Will let you know the results in future rantings.
>>
>> In addition, I've some reading to do concerning the A+
>> and MCSA in preperation for exams.
>>
>> As for today, you all have a "free of eddierox day."
>> This means you can talk sh*t completely free of any
>> reprecussion from me.
>>
>> I'll check up on you from time to time to see what was
>> said about me just for a chuckle.
>>
>> With this in mind, commence firing!!!!!!
>>
>> ***YAWN***
>>
>>
>
>
>.
>

billLASTINIT
Wed Apr 07 11:55:00 CDT 2004

Politician Spock wrote:
> "Ken Briscoe" <youcant@sendmespam.com> wrote in message
> news:eCmpawLHEHA.2720@TK2MSFTNGP11.phx.gbl...
>>
>> I'll try anything once.
>>
>
>
> Ken, we gotta talk. Seriously man. I'm worried about you.

Whatsamatta? Trisexuality threatens you?

--
Fris "I am not a triaphobe" bee®

Certaholics
http://groups.yahoo.com/group/certaholics

JaR
Wed Apr 07 11:59:18 CDT 2004

Ken Briscoe opined, On 4/7/04 9:19 AM:

>
> Don't put any viruses or trojans or any of that horsesh!t in there, and you
> can count me in. I'll try anything once.
>


AOL

eddierox
Wed Apr 07 11:56:03 CDT 2004


Here's the translation:

I have a dream.
***I'M HAVING AN EPIPHANY...HURRY, GET ME SOME TOILET
PAPER***
(NO OFFENSE MLK)

Being a professional VB6 programmer I have the
ability to download a VB6 newsgroup reader from
planetsourcecode.com and modify it to allow all
posts through except those from eddierox.
***LETS TAKE YOU UP ON IT, EDDIEROX HAS BEAT US UP SO
BADLY HERE, THAT ITS TIME TO SURRENDER AND ALLOW
LEGITIMATE PEOPLE TO ACCESS THE MESSAGE BOARD FREE FROM
MASTERBAITERS***

Hey, I can even add spam-like filter settings to exclude
any post in ALL UPPERCASE. Or, if you prefer, I
can simply correct the case to take the edge off
of it (or just go <snip>).
***ITS NOT THAT EDDIEROXS' CAPLOCKS MAKE ME CRY, I'VE
NOTHING BETTER TO DO WITH REGARDS TO MY PINK SLIP AND
EDDIEROX HAS BEAT ME UP SO BADLY, THAT I'M DESPERATELY
NEEDING TO SEEK COMFORT, REFUGE AND REASSURANCE WITH MY
FELLOW FLAMERS (IRE AMONG THEIVES)... THANK GOD ITS
FREEWARE***

The possibilities are endless. I'm going to work on it
in my spare time.
***PENDING PINK SLIP OR LIKE JEFFERY DAHMER?***

If there is any interest is such a newsreader out
there let me know, and I'll shoot you a copy when
I'm done.
***THANKS BUT NO THANKS. IT'S TOO MUCH WORK AND TOO HARD
ON OUR INTELLIGENCE AND BESIDES, EDDIEROX REALLY MAKES
OUR DAY.
SO GOOD BYE, GOOD LUCK AND GOOD RIDDANCE IN YOUR OWN
LITTLE
WORLD ***

Kpg (JELLY)

On a mission to make the world a better place.
***I'M ON A MISSION FROM GOD, WHEN I'M NOT TO BUSY LOSING
TO THE MIGHTY EDDIEROX***


>-----Original Message-----
>Being a professional VB6 programmer I have the
>ability to download a VB6 newsgroup reader from
>planetsourcecode.com and modify it to allow all
>posts through except those from eddierox. Hey,
>I can even add spam-like filter settings to exclude
>any post in ALL UPPERCASE. Or, if you prefer, I
>can simply correct the case to take the edge off
>of it (or just go <snip>). The possibilities are
>endless. I'm going to work on it in my spare time.
>If there is any interest is such a newsreader out
>there let me know, and I'll shoot you a copy when
>I'm done.
>
>kpg
>
>On a mission to make the world a better place.
>
>
>.
>

Neil
Wed Apr 07 12:02:03 CDT 2004

Frisbee® <billLASTINIT@dasi-software.com> wrote in news:#rP3REMHEHA.712
@tk2msftngp13.phx.gbl:

> Trisexuality

what the third one (and why stop at 3)?

--
Neil
"you'd do what, to who, for how many biscuits?"

billLASTINIT
Wed Apr 07 12:09:42 CDT 2004

Neil wrote:
> Frisbee® <billLASTINIT@dasi-software.com> wrote in
> news:#rP3REMHEHA.712 @tk2msftngp13.phx.gbl:
>
>> Trisexuality
>
> what the third one (and why stop at 3)?

A Trisexual is willing to try anything (sexual) at least once...

--
Fris "eddierox comes to mind" bee®

Certaholics
http://groups.yahoo.com/group/certaholics

Neil
Wed Apr 07 12:14:25 CDT 2004

Frisbee® <billLASTINIT@dasi-software.com> wrote in news:OdRxfMMHEHA.3576
@tk2msftngp13.phx.gbl:

> "eddierox comes to mind"

*shudder*

--
Neil
"you'd do what, to who, for how many biscuits?"

kpg
Wed Apr 07 12:17:22 CDT 2004

"Rowdy Yates" <rowdy_yates2@removethis.lycos.com> wrote in message
news:Xns94C48153B3E2rowdyyates2123@207.46.248.16...
> yup. i use xnews. very configurable. but if you use oe or netscape. it
takes
> a bit of getting used to.

I use oe, tried xnews - too odd for me. I'm going to
make my newsreader like oe. I'll look at xnews to get
some ideas.

And yes, it will be freeware, downloadable from a secure
site by invitation only.

kpg

JaR
Wed Apr 07 12:21:19 CDT 2004

Rowdy Yates opined, On 4/7/04 9:43 AM:

> Frisbee® <billLASTINIT@dasi-software.com> wrote in news:#fo6O7LHEHA.740
> @tk2msftngp13.phx.gbl:
>
>
>>Rowdy Yates wrote:
>>
>>>you know, in other ng's they go "spaz attack" on you if you top post.
>>>only here is it welcomed. :-)
>>
>>It's not welcomed... it's tolerated.
>>
>
>
> i top post 'casue y'all top post.
>
> Rowdy Yates

Y'all who?

JaR
Thug eh

Neil
Wed Apr 07 12:20:01 CDT 2004

"kpg" <ipost@thereforeiam.com> wrote in news:ePgUzQMHEHA.2432
@TK2MSFTNGP11.phx.gbl:

> freeware

my favorite...and I get what I pay for...

--
Neil
"you'd do what, to who, for how many biscuits?"

Ken
Wed Apr 07 12:21:23 CDT 2004

"JaR" <plentenospam@nospamsofthome.net> wrote in message
news:%232EqqFMHEHA.548@TK2MSFTNGP09.phx.gbl...
> Ken Briscoe opined, On 4/7/04 9:19 AM:
>
> >
> > Don't put any viruses or trojans or any of that horsesh!t in there, and
you
> > can count me in. I'll try anything once.
> >
>
>
> AOL

Even *I* have standards.

--

KB - MCNGP "silent thug" #26

first initial last name AT hotmail DOT com

Ken
Wed Apr 07 12:22:29 CDT 2004

"Rowdy Yates" <rowdy_yates2@removethis.lycos.com> wrote in message
news:Xns94C4802A7C1BArowdyyates2123@207.46.248.16...
> you know, in other ng's they go "spaz attack" on you if you top post. only
> here is it welcomed. :-)

define "welcomed".

--

KB - MCNGP "silent thug" #26

first initial last name AT hotmail DOT com

billLASTINIT
Wed Apr 07 12:26:07 CDT 2004

JaR wrote:
> Rowdy Yates opined, On 4/7/04 9:43 AM:
>
>> Frisbee® <billLASTINIT@dasi-software.com> wrote in
>> news:#fo6O7LHEHA.740 @tk2msftngp13.phx.gbl:
>>
>>
>>> Rowdy Yates wrote:
>>>
>>>> you know, in other ng's they go "spaz attack" on you if you top
>>>> post. only here is it welcomed. :-)
>>>
>>> It's not welcomed... it's tolerated.
>>>
>>
>>
>> i top post 'casue y'all top post.
>>
>> Rowdy Yates
>
> Y'all who?

Doncha just love it when Canucks try to talk all southern, eh?

We have this thing here in the south, we call it "Canadian Bacon", but I
hear y'all up in the Great White North call it "back bacon." Well you know
that white or yellow cheese that y'all eat up there in Canada? Y'all
probably call it "American Cheese" be we locals call it "Back Cheese." {$1
to Bob and Doug Mackenzie}

--
Fris "You're such a hose head!" bee®

Certaholics
http://groups.yahoo.com/group/certaholics

TechGeekPro
Wed Apr 07 12:32:16 CDT 2004

I can't stand bottom posts.

--
I may not be fully certified, but I am fully certifiable.

"Rowdy Yates" <rowdy_yates2@removethis.lycos.com> wrote in message
news:Xns94C48177DBBE2rowdyyates2123@207.46.248.16...
> Frisbee® <billLASTINIT@dasi-software.com> wrote in news:#fo6O7LHEHA.740
> @tk2msftngp13.phx.gbl:
>
> > Rowdy Yates wrote:
> >> you know, in other ng's they go "spaz attack" on you if you top post.
> >> only here is it welcomed. :-)
> >
> > It's not welcomed... it's tolerated.
> >
>
> i top post 'casue y'all top post.
>
> Rowdy Yates
> --
> "the man who tried and failed miserably"
>

LnkWizard
Wed Apr 07 12:33:29 CDT 2004

To use proper southern grammar, All y'all do.

----------------------------------------------------------------------------
---
LnkWizard MCNGP 2^5

"He who does not test himself is worthless indeed"
----------------------------------------------------------------------------
---


"JaR" <plentenospam@nospamsofthome.net> wrote in message
news:OJdI$RMHEHA.2308@tk2msftngp13.phx.gbl...
> Rowdy Yates opined, On 4/7/04 9:43 AM:
>
> > Frisbee® <billLASTINIT@dasi-software.com> wrote in news:#fo6O7LHEHA.740
> > @tk2msftngp13.phx.gbl:
> >
> >
> >>Rowdy Yates wrote:
> >>
> >>>you know, in other ng's they go "spaz attack" on you if you top post.
> >>>only here is it welcomed. :-)
> >>
> >>It's not welcomed... it's tolerated.
> >>
> >
> >
> > i top post 'casue y'all top post.
> >
> > Rowdy Yates
>
> Y'all who?
>
> JaR
> Thug eh

Rowdy
Wed Apr 07 12:33:55 CDT 2004

Frisbee® <billLASTINIT@dasi-software.com> wrote in news:u8##qVMHEHA.3284
@TK2MSFTNGP11.phx.gbl:

> JaR wrote:
>> Rowdy Yates opined, On 4/7/04 9:43 AM:
>>
>>> Frisbee® <billLASTINIT@dasi-software.com> wrote in
>>> news:#fo6O7LHEHA.740 @tk2msftngp13.phx.gbl:
>>>
>>>
>>>> Rowdy Yates wrote:
>>>>
>>>>> you know, in other ng's they go "spaz attack" on you if you top
>>>>> post. only here is it welcomed. :-)
>>>>
>>>> It's not welcomed... it's tolerated.
>>>>
>>>
>>>
>>> i top post 'casue y'all top post.
>>>
>>> Rowdy Yates
>>
>> Y'all who?
>
> Doncha just love it when Canucks try to talk all southern, eh?

y'all 'ave a nice day, y'ear.

>
> We have this thing here in the south, we call it "Canadian Bacon", but I
> hear y'all up in the Great White North call it "back bacon." Well you know
> that white or yellow cheese that y'all eat up there in Canada? Y'all
> probably call it "American Cheese" be we locals call it "Back Cheese." {$1
> to Bob and Doug Mackenzie}
>

actually i was in the store looking at the bacon products the other day and i
was wondering about how does "back bacon" differ from "canadian bacon". are
you telepathic?

i also notined they had "turkey bacon" and "chicken bacon". that got me very
confused. i don't get it? doesn't it have to be a piggy to be "bacon"?

ah, the mysteries of life.

;-)


Rowdy Yates
--
"the man who tried and failed miserably"

Rowdy
Wed Apr 07 12:34:17 CDT 2004

"Ken Briscoe" <youcant@sendmespam.com> wrote in news:ulrZiTMHEHA.2876
@TK2MSFTNGP09.phx.gbl:

> "Rowdy Yates" <rowdy_yates2@removethis.lycos.com> wrote in message
> news:Xns94C4802A7C1BArowdyyates2123@207.46.248.16...
>> you know, in other ng's they go "spaz attack" on you if you top post. only
>> here is it welcomed. :-)
>
> define "welcomed".
>

point taken. i am bottom posting agian.

Rowdy Yates
--
"the man who tried and failed miserably"

Rowdy
Wed Apr 07 12:35:25 CDT 2004

"TechGeekPro" <%username%@yahoo.com> wrote in news:#UUB8YMHEHA.324
@tk2msftngp13.phx.gbl:

> I can't stand bottom posts.
>
> --
> I may not be fully certified, but I am fully certifiable.
>
> "Rowdy Yates" <rowdy_yates2@removethis.lycos.com> wrote in message
> news:Xns94C48177DBBE2rowdyyates2123@207.46.248.16...
>> Frisbee® <billLASTINIT@dasi-software.com> wrote in news:#fo6O7LHEHA.740
>> @tk2msftngp13.phx.gbl:
>>
>> > Rowdy Yates wrote:
>> >> you know, in other ng's they go "spaz attack" on you if you top post.
>> >> only here is it welcomed. :-)
>> >
>> > It's not welcomed... it's tolerated.
>> >
>>
>> i top post 'casue y'all top post.
>>
>> Rowdy Yates
>> --
>> "the man who tried and failed miserably"
>>
>
>

tough "poopy". you getting bottom posting from rowdy, biotch.

Rowdy Yates
--
"the man who tried and failed miserably"

billLASTINIT
Wed Apr 07 12:39:13 CDT 2004

TechGeekPro wrote:
> I can't stand bottom posts.

Which explains why you're certifiable.

--
Fris "snort" bee®

Certaholics
http://groups.yahoo.com/group/certaholics

billLASTINIT
Wed Apr 07 12:41:22 CDT 2004

CONFORMIST!

Rowdy Yates wrote:
> "TechGeekPro" <%username%@yahoo.com> wrote in news:#UUB8YMHEHA.324
> @tk2msftngp13.phx.gbl:
>
>> I can't stand bottom posts.
>>
>> --
>> I may not be fully certified, but I am fully certifiable.
>>
>> "Rowdy Yates" <rowdy_yates2@removethis.lycos.com> wrote in message
>> news:Xns94C48177DBBE2rowdyyates2123@207.46.248.16...
>>> Frisbee® <billLASTINIT@dasi-software.com> wrote in
>>> news:#fo6O7LHEHA.740 @tk2msftngp13.phx.gbl:
>>>
>>>> Rowdy Yates wrote:
>>>>> you know, in other ng's they go "spaz attack" on you if you top
>>>>> post. only here is it welcomed. :-)
>>>>
>>>> It's not welcomed... it's tolerated.
>>>>
>>>
>>> i top post 'casue y'all top post.
>>>
>>> Rowdy Yates
>>> --
>>> "the man who tried and failed miserably"
>>>
>>
>>
>
> tough "poopy". you getting bottom posting from rowdy, biotch.
>
> Rowdy Yates

Neil
Wed Apr 07 12:55:12 CDT 2004

Rowdy Yates <rowdy_yates2@removethis.lycos.com> wrote in
news:Xns94C489FFFEFCArowdyyates2123@207.46.248.16:

> y'all 'ave a nice day, y'ear.

Pack your bags Rowdy. The boys will be there in a few minutes with the
extradition papers. Use of the terms listed above is in violation of your
Canadian citizenship. We have not decided where you will be sent due to the
strange mix of dialects, but currently we are thinking Uganda...

--
Neil
"you'd do what, to who, for how many biscuits?"

Jtyc
Wed Apr 07 13:01:21 CDT 2004

> point taken. i am bottom posting agian.

Bottom posting is fine if you just snip effectively. Problem is, few
people do.

Neil
Wed Apr 07 13:02:57 CDT 2004

Frisbee® <billLASTINIT@dasi-software.com> wrote in news:O2OOMeMHEHA.3992
@TK2MSFTNGP10.phx.gbl:

band wagon jumper...

> CONFORMIST!
>
> Rowdy Yates wrote:
>> "TechGeekPro" <%username%@yahoo.com> wrote in news:#UUB8YMHEHA.324
>> @tk2msftngp13.phx.gbl:
>>
>>> I can't stand bottom posts.
>>>
>>> --
>>> I may not be fully certified, but I am fully certifiable.
>>>
>>> "Rowdy Yates" <rowdy_yates2@removethis.lycos.com> wrote in message
>>> news:Xns94C48177DBBE2rowdyyates2123@207.46.248.16...
>>>> Frisbee® <billLASTINIT@dasi-software.com> wrote in
>>>> news:#fo6O7LHEHA.740 @tk2msftngp13.phx.gbl:
>>>>
>>>>> Rowdy Yates wrote:
>>>>>> you know, in other ng's they go "spaz attack" on you if you top
>>>>>> post. only here is it welcomed. :-)
>>>>>
>>>>> It's not welcomed... it's tolerated.
>>>>>
>>>>
>>>> i top post 'casue y'all top post.
>>>>
>>>> Rowdy Yates
>>>> --
>>>> "the man who tried and failed miserably"
>>>>
>>>
>>>
>>
>> tough "poopy". you getting bottom posting from rowdy, biotch.
>>
>> Rowdy Yates
>
>



--
Neil
"you'd do what, to who, for how many biscuits?"

The
Wed Apr 07 15:35:50 CDT 2004

>Oh God, I know people like this.

you have my deepest sympathy.

Kline Sphere (Chalk) MCNGP #3

showie
Thu Apr 08 10:26:13 CDT 2004

dont mean to be honest eddierox but NOBODY GIVES WAY< OH
WAY you constanly waste time with your dribble
>-----Original Message-----
>
>Ok, here's what's up for today.
>It is hereby decreed "eddierox free day"
>
>I'll be working on my computer today.
>
>I'm lapping and polishing a 50mm x 50mm x 1/4" pure
>copper cold plate to work in conjunction with a new
>sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
>Peltier Device and Thermalright SP-94 Heatsink w/Vantec
>Stealth 92mm Fan currently only spinning at 1700-1750 RPM.
>
>This is to compliment my new P4 2.8E Prescott Processor.
>
>Using an (unclockable)Intel D865GRH Motherboard, 1 GB of
>OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
>converted hardrives, BFG Asylum 5900, ThermalTake 420W
>w/active power factor control, CDRW, DVDRW, ZIP 250 and
>IBM Floppy, 80mm & 92mm Zalman Case Fans barely spinning,
>all tucked into a Gateway Stingray Desktop and Gateway
>FPD1810 LCD, my current heat ranges are as follows:
>
>Processor Zone:
>125F @ idle. 150F+ @ Full Load.
>System Zone 1: 99F-108F
>System Zone 2: 100F-140F
>
>Although my system is currently virtual noiseless, I have
>been unhappy with these heat range figures and thus
>some "new blood."
>Don't worry, I'll be using Lubrex and DowCorning
>Conformer throughout.
>
>Will let you know the results in future rantings.
>
>In addition, I've some reading to do concerning the A+
>and MCSA in preperation for exams.
>
>As for today, you all have a "free of eddierox day."
>This means you can talk sh*t completely free of any
>reprecussion from me.
>
>I'll check up on you from time to time to see what was
>said about me just for a chuckle.
>
>With this in mind, commence firing!!!!!!
>
>***YAWN***
>
>
>.
>

showie
Thu Apr 08 10:28:09 CDT 2004

ps. your mum sounds like one of the uglyest people, but
she's funny i give her that much and whats with the third
cheak
>-----Original Message-----
>
>Ok, here's what's up for today.
>It is hereby decreed "eddierox free day"
>
>I'll be working on my computer today.
>
>I'm lapping and polishing a 50mm x 50mm x 1/4" pure
>copper cold plate to work in conjunction with a new
>sealed 50mm x 50mm 110-170W Nasa Johnson Space Center
>Peltier Device and Thermalright SP-94 Heatsink w/Vantec
>Stealth 92mm Fan currently only spinning at 1700-1750 RPM.
>
>This is to compliment my new P4 2.8E Prescott Processor.
>
>Using an (unclockable)Intel D865GRH Motherboard, 1 GB of
>OCZ PC3200 Platinum Memory, Dual Maxtor 40GB SATA
>converted hardrives, BFG Asylum 5900, ThermalTake 420W
>w/active power factor control, CDRW, DVDRW, ZIP 250 and
>IBM Floppy, 80mm & 92mm Zalman Case Fans barely spinning,
>all tucked into a Gateway Stingray Desktop and Gateway
>FPD1810 LCD, my current heat ranges are as follows:
>
>Processor Zone:
>125F @ idle. 150F+ @ Full Load.
>System Zone 1: 99F-108F
>System Zone 2: 100F-140F
>
>Although my system is currently virtual noiseless, I have
>been unhappy with these heat range figures and thus
>some "new blood."
>Don't worry, I'll be using Lubrex and DowCorning
>Conformer throughout.
>
>Will let you know the results in future rantings.
>
>In addition, I've some reading to do concerning the A+
>and MCSA in preperation for exams.
>
>As for today, you all have a "free of eddierox day."
>This means you can talk sh*t completely free of any
>reprecussion from me.
>
>I'll check up on you from time to time to see what was
>said about me just for a chuckle.
>
>With this in mind, commence firing!!!!!!
>
>***YAWN***
>
>
>.
>

eddierox
Thu Apr 08 11:10:28 CDT 2004


Be honest...might find out something about yourself...

Can't really make out what you said...

...is this Hindi?

>-----Original Message-----
>dont mean to be hones