PAE Settings in windows 2000 Advanced server.

I have a problem in configuring 6GB RAM (DDR RAM)in Intel
Server Board SE7501HG2 with Intel XEON 3.2GHZ(Dual
Processors). I have loaded windows 2000 Advanced server
with Service pack4 in workgroup mode. The fault tolerance
is been established by software raid 1 configured in the
boot disk and raid5 configured in data disks. The basic
purpose of the server is to run as terminal server cum
file server.
When I am adding the /PAE extension in the boot.ini file,
it is sensing 6GB RAM, but virtual memory is not exceeding
4gb per partition.
After putting server online with 15-20 users, the server
is giving physical dump error with blue screen and reboots
automatically.
It is observed that during the opeartions in terminal
services manager(reset,logout operations), the server is
rebooting i.e. giving physical dump error.



KINDLY GIVE ME SOLUTION TO SOLVE THE PROBLEM WITH ABOVE
METIONED SYMPTOM.

seanja
Fri Feb 06 05:41:41 CST 2004

check you have configured your hard disks properly and all
your ram is compatible with the motherboard and each other
we are her to help not do your job for you

quote (what matters is being right not being told you are)
you wilkl learn somthing new everyday
>-----Original Message-----
>I have a problem in configuring 6GB RAM (DDR RAM)in Intel
>Server Board SE7501HG2 with Intel XEON 3.2GHZ(Dual
>Processors). I have loaded windows 2000 Advanced server
>with Service pack4 in workgroup mode. The fault tolerance
>is been established by software raid 1 configured in the
>boot disk and raid5 configured in data disks. The basic
>purpose of the server is to run as terminal server cum
>file server.
>When I am adding the /PAE extension in the boot.ini file,
>it is sensing 6GB RAM, but virtual memory is not
exceeding
>4gb per partition.
>After putting server online with 15-20 users, the server
>is giving physical dump error with blue screen and
reboots
>automatically.
>It is observed that during the opeartions in terminal
>services manager(reset,logout operations), the server is
>rebooting i.e. giving physical dump error.
>
>
>
>KINDLY GIVE ME SOLUTION TO SOLVE THE PROBLEM WITH ABOVE
>METIONED SYMPTOM.
>.
>

Marcco
Fri Feb 06 06:51:00 CST 2004

Try configuring the paging file manualy, and make it 6 or
more GB big.

>-----Original Message-----
>check you have configured your hard disks properly and
all
>your ram is compatible with the motherboard and each
other
>we are her to help not do your job for you
>
>quote (what matters is being right not being told you are)
>you wilkl learn somthing new everyday
>>-----Original Message-----
>>I have a problem in configuring 6GB RAM (DDR RAM)in
Intel
>>Server Board SE7501HG2 with Intel XEON 3.2GHZ(Dual
>>Processors). I have loaded windows 2000 Advanced server
>>with Service pack4 in workgroup mode. The fault
tolerance
>>is been established by software raid 1 configured in the
>>boot disk and raid5 configured in data disks. The basic
>>purpose of the server is to run as terminal server cum
>>file server.
>>When I am adding the /PAE extension in the boot.ini
file,
>>it is sensing 6GB RAM, but virtual memory is not
>exceeding
>>4gb per partition.
>>After putting server online with 15-20 users, the server
>>is giving physical dump error with blue screen and
>reboots
>>automatically.
>>It is observed that during the opeartions in terminal
>>services manager(reset,logout operations), the server is
>>rebooting i.e. giving physical dump error.
>>
>>
>>
>>KINDLY GIVE ME SOLUTION TO SOLVE THE PROBLEM WITH ABOVE
>>METIONED SYMPTOM.
>>.
>>
>.
>

no
Fri Feb 06 15:31:06 CST 2004

nice smartA$$ answer.
>-----Original Message-----
>check you have configured your hard disks properly and
all
>your ram is compatible with the motherboard and each
other
>we are her to help not do your job for you
>
>quote (what matters is being right not being told you
are)
>you wilkl learn somthing new everyday
>>-----Original Message-----
>>I have a problem in configuring 6GB RAM (DDR RAM)in
Intel
>>Server Board SE7501HG2 with Intel XEON 3.2GHZ(Dual
>>Processors). I have loaded windows 2000 Advanced server
>>with Service pack4 in workgroup mode. The fault
tolerance
>>is been established by software raid 1 configured in
the
>>boot disk and raid5 configured in data disks. The basic
>>purpose of the server is to run as terminal server cum
>>file server.
>>When I am adding the /PAE extension in the boot.ini
file,
>>it is sensing 6GB RAM, but virtual memory is not
>exceeding
>>4gb per partition.
>>After putting server online with 15-20 users, the
server
>>is giving physical dump error with blue screen and
>reboots
>>automatically.
>>It is observed that during the opeartions in terminal
>>services manager(reset,logout operations), the server
is
>>rebooting i.e. giving physical dump error.
>>
>>
>>
>>KINDLY GIVE ME SOLUTION TO SOLVE THE PROBLEM WITH ABOVE
>>METIONED SYMPTOM.
>>.
>>
>.
>

anonymous
Sun Feb 08 01:31:05 CST 2004

Try this

http://support.microsoft.com/default.aspx?scid=kb;en-us;247904&Product=win200

Pagefile is limited to 4Gb. Use something other than boot partition

http://support.microsoft.com/default.aspx?scid=kb;en-us;197379&Product=win2000Large memory support

http://support.microsoft.com/default.aspx?scid=kb;en-us;283037&Product=win200

And best of all, typing "How to overcome paging file limit in Windows
returns this gem from the Microsoft Knowledge Base

http://support.microsoft.com/default.aspx?scid=kb;en-us;237740&Product=win200


I don't mind providing help, but don't you think
you might be out of your depth as a Sys Admin here?