Restore 2003 Server to Different Hardware

I'm trying to setup my disaster recovery plan for a windows 2003 server
running TS. It is
currently on old IBM hardware, but for disaster recovery I will need to know
how to restore to some later IBM hardware. What would be the best path to
bring the box back to life?
Any suggestions please?

For a test, I am currently in the slow process of installing 2003 on
different hardware and am going to restore the full backup over it from the
old 2003 server, then do a 'repair install' of 2003.
I'm not sure if this will work considering 2003 and TS licensing and other
issues to do with 2003.

However, I have (after much effort) successfully restored a 2000 Domain
Controller that had FSMO, GC, DNS and Exchange 5.5 to different hardware. If
anyone would like my notes on how I did this, let me know.

But at the moment, I'm trying to do the same with 2003.


--

Regards,

Slarty Bartfast



- "Huh? I mean seriously, and with great sincerity, HUH?"

Slarty
Wed Jun 08 19:14:16 CDT 2005

BTW, the 2000 Domain Controller restore was done with no other DC's
available.
I took the worst case scenario such as a fire, and I had to restore only
from a backup tape to new hardware.

--

Regards,

Slarty Bartfast



- Never let your mind wander, it's too small to be left alone.

zenner
Thu Jun 09 12:42:23 CDT 2005

AS long as you install the correct OS and the system configuration is
logically the same. discs have same configuration, equal or greater
capacity...Clusters, Multi processors...any drivers are appropriate for the
new system. Restore to new hardware is "generally" no different that to the
old hardware. The trick is be sure the new OS is functionally identical to
the old one.

Further, if you are doing this right, you will have tested the process,
before you need to do a crisis level recovery.

"Slarty Bartfast" <Slarty@Bartfast.com> wrote in message
news:%23mTTWfIbFHA.1384@TK2MSFTNGP09.phx.gbl...
> BTW, the 2000 Domain Controller restore was done with no other DC's
> available.
> I took the worst case scenario such as a fire, and I had to restore only
> from a backup tape to new hardware.
>
> --
>
> Regards,
>
> Slarty Bartfast
>
>
>
> - Never let your mind wander, it's too small to be left alone.
>
>

Marlin
Thu Jun 16 14:33:55 CDT 2005

Good old vmware p2v
no more tears!


On Thu, 9 Jun 2005 10:02:55 +1000, "Slarty Bartfast"
<Slarty@Bartfast.com> wrote:

>I'm trying to setup my disaster recovery plan for a windows 2003 server
>running TS. It is
>currently on old IBM hardware, but for disaster recovery I will need to know
>how to restore to some later IBM hardware. What would be the best path to
>bring the box back to life?
>Any suggestions please?
>
>For a test, I am currently in the slow process of installing 2003 on
>different hardware and am going to restore the full backup over it from the
>old 2003 server, then do a 'repair install' of 2003.
>I'm not sure if this will work considering 2003 and TS licensing and other
>issues to do with 2003.
>
>However, I have (after much effort) successfully restored a 2000 Domain
>Controller that had FSMO, GC, DNS and Exchange 5.5 to different hardware. If
>anyone would like my notes on how I did this, let me know.
>
>But at the moment, I'm trying to do the same with 2003.

+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_
Sergeant Hartwell Says:
You will not say a word! You will not speak unless spoken to! Do you ladies understand me?
(Sir! Yes! Sir!).
From this point forward you will eat, think and dream Windows Server 2003! Do you maggots understand?
(Sir! Yes! Sir!)
We are in a war, Gentlemen! The future of the free world depends on you people becoming Microsoft certified! You each will become a MCSE! Every time you see a router that isnt RRAS you will kill it! What are you going to do ladies?
(Kill! Kill! Kill!).
+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_