Help with crash analysis please
Hi,
I have Debug Diagnostic Tool installed and dllhost.exe process crashed.
Below is results. Can somebody decipher that. What I saw is that log file
said thread 6412 caused an exception and stack on that thread reads as
follows below, what can I make out of it?
KERNEL32!RaiseException+56
rpcrt4!RpcRaiseException+1d
OLE32!ThreadInvoke+21a
rpcrt4!DispatchToStubInC+84
rpcrt4!RPC_INTERFACE::DispatchToStubWorker+100
rpcrt4!RPC_INTERFACE::DispatchToStub+5e
rpcrt4!RPC_INTERFACE::DispatchToStubWithObject+a9
rpcrt4!LRPC_SCALL::DealWithRequestMessage+210
rpcrt4!LRPC_ADDRESS::DealWithLRPCRequest+10c
rpcrt4!LRPC_ADDRESS::ReceiveLotsaCalls+229
rpcrt4!RecvLotsaCallsWrapper+9
rpcrt4!BaseCachedThreadRoutine+4f
rpcrt4!ThreadStartRoutine+18
KERNEL32!BaseThreadStart+52
Dllhost log shows following 2 lines relevant to crash
[9/26/2006 4:40:44 PM] First chance exception - 0x80010108 caused by thread
with system id 6412
[9/26/2006 4:40:46 PM] Created dump file
C:\output\dllhost__PID__16684__Date__09_26_2006__Time_04_40_44PM__918__First
chance exception 0X80010108.dmp
Below is complete stack
Type Description Recommendation
Error In
dllhost__PID__16684__Date__09_26_2006__Time_04_40_44PM__918__First chance
exception 0X80010108.dmp the assembly instruction at
KERNEL32!RaiseException+56 in C:\WINNT\system32\KERNEL32.DLL from Microsoft
Corporation has caused an unknown exception (0x80010108) on thread 10
An exception thrown by Kernel32!RaiseException usually indicates a problem
with another module. Please review the stack for the faulting thread (10)
further to determine which module actually threw the exception raised by
Kernel32.dll.
Error Symbols were not available to resolve the symbol
"comsvcs!g_pAppTrackerObject". The COM+ STA ThreadPool report will not be
accurate. Use a valid symbol path (i.e.
"SRV*C:\symbols*http://msdl.microsoft.com/download/symbols" in the DebugDiag
settings or in your _NT_SYMBOL_PATH environment variable.
Analysis Details
Table Of Contents
dllhost__PID__16684__Date__09_26_2006__Time_04_40_44PM__918__First chance
exception 0X80010108.dmp
Top 5 threads by CPU time
Thread report
COM+ STA ThreadPool Report
COM+ STA ThreadPool Report
Faulting Module Information
Report for
dllhost__PID__16684__Date__09_26_2006__Time_04_40_44PM__918__First chance
exception 0X80010108.dmp
Type of Analysis Performed Combined Crash/Hang Analysis
Machine Name DALPRDSIINT6
Operating System Windows 2000 Service Pack 4
Number Of Processors 1
Process ID 16684
Process Image C:\WINNT\system32\dllhost.exe
System Up-Time 143 day(s) 00:56:35
Process Up-Time 0 day(s) 00:20:37
Top 5 Threads by CPU time
Note - Times include both user mode and kernel mode for each thread Thread
ID: 4 Total CPU Time: 0 day(s) 00:00:00.343 Entry Point for Thread:
msvcrt!_endthreadex+32
Thread ID: 5 Total CPU Time: 0 day(s) 00:00:00.312 Entry Point for
Thread: rpcrt4!RPC_SERVER::InquireInterfaceIds+5
Thread ID: 10 Total CPU Time: 0 day(s) 00:00:00.281 Entry Point for
Thread: rpcrt4!RPC_SERVER::InquireInterfaceIds+5
Thread ID: 13 Total CPU Time: 0 day(s) 00:00:00.78 Entry Point for
Thread: msdtcprx!CConnectionManager::TimerProc
Thread ID: 6 Total CPU Time: 0 day(s) 00:00:00.62 Entry Point for
Thread: comsvcs!CEventServer::DispatchEvents
Thread report
Thread 0 - System ID 14208
Entry point dllhost!WinMainCRTStartup
Create time 9/26/2006 4:20:08 PM
Time spent in user mode 0 Days 0:0:0.15
Time spent in kernel mode 0 Days 0:0:0.31
Function Source
NTDLL!ZwWaitForSingleObject+b
KERNEL32!WaitForSingleObjectEx+71
KERNEL32!WaitForSingleObject+f
OLE32!CSurrogateProcessActivator::WaitForSurrogateTimeout+4f
OLE32!CoRegisterSurrogateEx+169
dllhost!WinMain+b0
dllhost!WinMainCRTStartup+156
KERNEL32!BaseProcessStart+3d
Back to Top
Thread 1 - System ID 2212
Entry point OLE32!CRpcThreadCache::RpcWorkerThreadEntry
Create time 9/26/2006 4:20:08 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.0
Function Source
USER32!ExitWindowsWorker+7e
OLE32!CDllHost::STAWorkerLoop+40
OLE32!CDllHost::WorkerThread+c2
OLE32!DLLHostThreadEntry+9
OLE32!CRpcThread::WorkerLoop+22
OLE32!CRpcThreadCache::RpcWorkerThreadEntry+1a
KERNEL32!BaseThreadStart+52
Back to Top
Thread 2 - System ID 14892
Entry point txfaux!WORK_QUEUE::ThreadLoop
Create time 9/26/2006 4:20:08 PM
Time spent in user mode 0 Days 0:0:0.15
Time spent in kernel mode 0 Days 0:0:0.15
Function Source
NTDLL!NtRemoveIoCompletion+b
KERNEL32!GetQueuedCompletionStatus+27
txfaux!WORK_QUEUE::WorkerLoop+a0
txfaux!WORK_QUEUE::ThreadLoop+58
KERNEL32!BaseThreadStart+52
Back to Top
Thread 3 - System ID 11656
Entry point msvcrt!_endthread+3f
Create time 9/26/2006 4:20:08 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.46
Function Source
NTDLL!ZwWaitForMultipleObjects+b
KERNEL32!WaitForMultipleObjectsEx+ea
KERNEL32!WaitForMultipleObjects+17
comsvcs!CRMRecoveryClerk::RecoveryThread+49d
comsvcs!RecoveryThreadFunction+8e
msvcrt!_endthread+c6
KERNEL32!BaseThreadStart+52
Back to Top
Thread 4 - System ID 12660
Entry point msvcrt!_endthreadex+32
Create time 9/26/2006 4:20:08 PM
Time spent in user mode 0 Days 0:0:0.78
Time spent in kernel mode 0 Days 0:0:0.265
Function Source
NTDLL!ZwDelayExecution+b
KERNEL32!SleepEx+32
KERNEL32!Sleep+b
comsvcs!PostData+f2
msvcrt!_endthreadex+c1
KERNEL32!BaseThreadStart+52
Back to Top
Thread 5 - System ID 13764
Entry point rpcrt4!RPC_SERVER::InquireInterfaceIds+5
Create time 9/26/2006 4:20:08 PM
Time spent in user mode 0 Days 0:0:0.15
Time spent in kernel mode 0 Days 0:0:0.296
Function Source
NTDLL!ZwReplyWaitReceivePortEx+b
rpcrt4!LRPC_ADDRESS::ReceiveLotsaCalls+74
rpcrt4!RecvLotsaCallsWrapper+9
rpcrt4!BaseCachedThreadRoutine+4f
rpcrt4!ThreadStartRoutine+18
KERNEL32!BaseThreadStart+52
Back to Top
Thread 6 - System ID 12732
Entry point comsvcs!CEventServer::DispatchEvents
Create time 9/26/2006 4:20:08 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.62
This thread is making a COM call to thread neutral apartment within the same
process
Function Source
NTDLL!ZwWaitForMultipleObjects+b
KERNEL32!WaitForMultipleObjectsEx+ea
KERNEL32!WaitForMultipleObjects+17
comsvcs!CLceDisp::DoWork+ab
rpcrt4!Invoke+30
rpcrt4!NdrStubCall2+664
rpcrt4!CStdStubBuffer_Invoke+ec
OLE32!SyncStubInvoke+61
OLE32!StubInvoke+a8
OLE32!CCtxComChnl::ContextInvoke+bb
OLE32!MTAInvoke+18
OLE32!AppInvoke+b5
OLE32!ComInvokeWithLockAndIPID+297
OLE32!ComInvoke+41
OLE32!ThreadDispatch+21
OLE32!DispatchCall+24
OLE32!CRpcChannelBuffer::SwitchAptAndDispatchCall+34
OLE32!CRpcChannelBuffer::SendReceive2+96
OLE32!CRpcChannelBuffer::SendReceive+11
OLE32!CAptRpcChnl::SendReceive+a9
OLE32!CCtxComChnl::SendReceive+124
rpcrt4!NdrProxySendReceive+4c
rpcrt4!NdrClientCall2+4f5
rpcrt4!ObjectStublessClient+76
rpcrt4!ObjectStubless+f
comsvcs!CEventServer::DispatchEvents+83
KERNEL32!BaseThreadStart+52
Back to Top
Thread 7 - System ID 14548
Create time 12:00:00 AM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.0
Function Source
NTDLL!ZwReplyWaitReceivePortEx+b
rpcrt4!LRPC_ADDRESS::ReceiveLotsaCalls+74
rpcrt4!RecvLotsaCallsWrapper+9
rpcrt4!BaseCachedThreadRoutine+4f
rpcrt4!ThreadStartRoutine+18
KERNEL32!BaseThreadStart+52
Back to Top
Thread 8 - System ID 14556
Entry point NTDLL!RtlpWaitThread
Create time 9/26/2006 4:20:11 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.0
Function Source
NTDLL!ZwWaitForMultipleObjects+b
NTDLL!RtlpWaitThread+1b9
KERNEL32!BaseThreadStart+52
Back to Top
Thread 9 - System ID 16436
Create time 12:00:00 AM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.0
Function Source
NTDLL!ZwReplyWaitReceivePortEx+b
rpcrt4!LRPC_ADDRESS::ReceiveLotsaCalls+74
rpcrt4!RecvLotsaCallsWrapper+9
rpcrt4!BaseCachedThreadRoutine+4f
rpcrt4!ThreadStartRoutine+18
KERNEL32!BaseThreadStart+52
Back to Top
Thread 10 - System ID 6412
Entry point rpcrt4!RPC_SERVER::InquireInterfaceIds+5
Create time 9/26/2006 4:20:11 PM
Time spent in user mode 0 Days 0:0:0.31
Time spent in kernel mode 0 Days 0:0:0.250
Function Source
KERNEL32!RaiseException+56
rpcrt4!RpcRaiseException+1d
OLE32!ThreadInvoke+21a
rpcrt4!DispatchToStubInC+84
rpcrt4!RPC_INTERFACE::DispatchToStubWorker+100
rpcrt4!RPC_INTERFACE::DispatchToStub+5e
rpcrt4!RPC_INTERFACE::DispatchToStubWithObject+a9
rpcrt4!LRPC_SCALL::DealWithRequestMessage+210
rpcrt4!LRPC_ADDRESS::DealWithLRPCRequest+10c
rpcrt4!LRPC_ADDRESS::ReceiveLotsaCalls+229
rpcrt4!RecvLotsaCallsWrapper+9
rpcrt4!BaseCachedThreadRoutine+4f
rpcrt4!ThreadStartRoutine+18
KERNEL32!BaseThreadStart+52
Back to Top
Thread 11 - System ID 13036
Entry point NTDLL!RtlpTimerThread
Create time 9/26/2006 4:20:13 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.15
Function Source
NTDLL!ZwDelayExecution+b
NTDLL!RtlpTimerThread+42
KERNEL32!BaseThreadStart+52
Back to Top
Thread 12 - System ID 14880
Entry point rtutils!TraceServerThread
Create time 9/26/2006 4:20:14 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.0
Function Source
NTDLL!ZwWaitForMultipleObjects+b
KERNEL32!WaitForMultipleObjectsEx+ea
KERNEL32!WaitForMultipleObjects+17
rtutils!TraceServerThread+de
KERNEL32!BaseThreadStart+52
Back to Top
Thread 13 - System ID 12064
Entry point msdtcprx!CConnectionManager::TimerProc
Create time 9/26/2006 4:20:14 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.78
Function Source
NTDLL!ZwWaitForSingleObject+b
KERNEL32!WaitForSingleObjectEx+71
KERNEL32!WaitForSingleObject+f
msdtcprx!CConnectionManager::TimerProcForNonGuardedUser+e6
msdtcprx!CConnectionManager::TimerProc+1b
KERNEL32!BaseThreadStart+52
Back to Top
Thread 14 - System ID 3336
Entry point msvcrt!_endthread+3f
Create time 9/26/2006 4:20:15 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.15
Function Source
NTDLL!ZwDelayExecution+b
KERNEL32!SleepEx+32
KERNEL32!Sleep+b
catsrv!RegSrvrPump+33
catsrv!RunService+5d
msvcrt!_endthread+c6
KERNEL32!BaseThreadStart+52
Back to Top
Thread 15 - System ID 6292
Entry point NTDLL!RtlpWorkerThread
Create time 9/26/2006 4:21:10 PM
Time spent in user mode 0 Days 0:0:0.0
Time spent in kernel mode 0 Days 0:0:0.0
Function Source
NTDLL!NtRemoveIoCompletion+b
NTDLL!RtlpWorkerThread+6b
KERNEL32!BaseThreadStart+52
Back to Top
COM+ STA ThreadPool Report
(STA ThreadPool not initialized)
In dllhost__PID__16684__Date__09_26_2006__Time_04_40_44PM__918__First chance
exception 0X80010108.dmp the assembly instruction at
KERNEL32!RaiseException+56 in C:\WINNT\system32\KERNEL32.DLL from Microsoft
Corporation has caused an unknown exception (0x80010108) on thread 10
Module Information
Image Name: C:\WINNT\system32\KERNEL32.DLL Symbol Type: PDB
Base address: 0x7c570000 Time Stamp: Thu Jan 06 03:17:41 2005
Checksum: 0x000bcae3 Comments:
COM DLL: False Company Name: Microsoft Corporation
ISAPIExtension: False File Description: Windows NT BASE API Client DLL
ISAPIFilter: False File Version: 5.00.2195.7006
Managed DLL: False Internal Name: kernel32
VB DLL: False Legal Copyright: Copyright (C) Microsoft Corp. 1981-1999
Loaded Image Name: c:\symcache\KERNEL32.dbg\41DD0235b3000\KERNEL32.dbg
Legal Trademarks:
Mapped Image Name: Original filename: kernel32
Module name: KERNEL32 Private Build:
Single Threaded: False Product Name: Microsoft(R) Windows (R) 2000
Operating System
Module Size: 716.00 KBytes Product Version: 5.00.2195.7006
Symbol File Name: c:\symcache\kernel32.pdb\41B04DC21\kernel32.pdb Special
Build: & Tag: IIS post not working...Get works ! Tag: 387924
Restart IIS and now virtual sites take over.
IIS was working fine for me except for a bit slow. I have 1 main site
and 15 virtual sites I did a reboot on my machine and when the box came
back online the default website did not startup on its own. What
happened was a virtual site came up and began listening to all traffic
for all my virtual sites including the default one. I fixed this issue,
how can i guarantee this does not happen again, if i reboot again. I
want to make sure default site starts first then the rest can follow. Tag: IIS post not working...Get works ! Tag: 387923
slow asp page response... help needed
Greetings all. I have a box running iis6.0 that is serving a few
sites. All has been well. Now here's the deal.
I have a 'backend customer order management' setup, nothign too fancy.
It has started to hang when I load pages. The site works fine on my
local test machine. I don't have any open db connections that I am
aware of. I check'd the problematic boexs application log and I have
the good ol' message...
Event Type: Error
Event Source: Active Server Pages
Event Category: None
Event ID: 5
Date: 9/25/2006
Time: 6:44:49 AM
Description:
Error: The Template Persistent Cache initialization failed for
Application P
ool 'DefaultAppPool' because of the following error: Could not create a
Disk
Cache Sub-directory for the Application Pool. The data may have
additional
error codes..
This box is not a domain controller. My issue is the slow performance
from my sites back end.
Can anyone point me in a direction as where I can look for help?
Thanks!
Joe Tag: IIS post not working...Get works ! Tag: 387922
change helo response iis 6 smtp
Hi All,
How do i change the helo response of my iis 6 smtp server?
Thanks,
PS Tag: IIS post not working...Get works ! Tag: 387921
IIS 5.1 - Download limitation when mapping a file type (e.g .swf)
Hello everyone,
We have a web site running on IIS 5.1 and we have links pointing to swf
files. Those links become available once the user login in to the web
application with a form. But if the users capture the url of the swf they can
access the swf without logging in. I want to use the forms authentication of
the web application serving these files so that they can not be access unless
the user logins with the form.
I know i can do this by adding an entry in the application mapping of my
virtual folder using the for the .swf files. This solution works fine but
there is a problem if the flash files are about 25mb or more. It seems like
IIS won't let the swf "application" download the file therefore causing an
error on the client side. Those swf files download the necessary content from
the web server and once all the components are in the cache it starts the
flash application (all this is done within the flash application)
My question is: Is there any kind of download limitation when mapping a file
extension in the Application Configuration of the virtual folder of the web
application? And if yes, can I go around it?
Note: If I do not map the swf files everything works fine except the fact
that the swf files can be access without authentication with the web
application.
Any help or other solutions to protect the swf files (except a flash
streaming server and NT security in IIS) would be appreciated!
Thank you!
Alexandre Tag: IIS post not working...Get works ! Tag: 387919
IIS 6.0 Confusion - Multiple Websites
Just made the change from IIS 5.0 on Win2K Pro to IIS6.0 with Windows 2003
Server on my dev machine, and I need multiple websites on the new server.
With IIS5.0, after I created a website, I accessed it with
http://computername/website and they were all using port 80 and all
unassigned. With IIS6 when I added a new website I got an error message that
the website couldn't start and "please select a unused port" something, so
when I stopped the only other websites (Default Web Site and Administration)
when I accessed the server with http://servername, my new site appeared. But
I want more than one website on the server.
So then I read about using host names, added another site as a test, gave
each of my sites different hostnames and then kept getting Bad HostName
errors. AND, I don't know the correct URL to access those different
websites. I tried http://servername/hostname1 and
http://servername/hostname2 and http://hostname1 and http://hostname2
without success (the last two started Internet searches). On my production
machine (with Win2K Server) I used hostnames successfully but can't seem to
figure things out for a server on a local network.
I've read the Help pages, but I guess I 1) don't understand how to create
different websites under one port and all unassigned, and 2) don't know what
URL to use on my local network to access any one of the sites.
Any help would be appreciated. Thanks. Tag: IIS post not working...Get works ! Tag: 387918
IIS 6.0, SSL, and no certificate
I have a website I'm testing on WinServer2003 that has one set of pages in a
directory subset of the website that I've set, under the Directory Security
tab, to require SSL and to Ignore Client Certificates. However, when I attemt
to access pages in this subset of the website, I get an errorstating that the
page cannot be displayed. Is there anyway I can do this without have
certificates? Tag: IIS post not working...Get works ! Tag: 387917
How to programmatically clear network passwords from IE
I run a web site (ASP) on the company intranet which I want to restrict
access to. A logon box is necessary since some computers are logged on
with "common" profiles.
Using IIS 6, I have set authentication method to Digest Auth which
communicates with Active Directory as wanted. I've remove anonymous
access and integrated Win auth. I've also set connection timeout to 30
seconds.
My problem is this:
1) User A successfully logs on to the site using his/hers network
password
2) User A leaves the computer without closing ALL Internet Explorer
windows
3) User B enters the site. The login box is pre-filled with user A's
username/password. User B only needs to click OK to enter the site.
I've tried changing the login settings under Authentication in IE, but
this doesn't help.
Is there a way to (preferably programmatically) clear the username and
password for the logon box? Tag: IIS post not working...Get works ! Tag: 387913
How to programmatically clear network passwords from IE
I run a web site (ASP) on the company intranet which I want to restrict
access to. A logon box is necessary since some computers are logged on
with "common" profiles.
Using IIS 6, I have set authentication method to Digest Auth which
communicates with Active Directory as wanted. I've remove anonymous
access and integrated Win auth. I've also set connection timeout to 30
seconds.
My problem is this:
1) User A successfully logs on to the site using his/hers network
password
2) User A leaves the computer without closing ALL Internet Explorer
windows
3) User B enters the site. The login box is pre-filled with user A's
username/password. User B only needs to click OK to enter the site.
I've tried changing the login settings under Authentication in IE, but
this doesn't help.
Is there a way to (preferably programmatically) clear the username and
password for the logon box? Tag: IIS post not working...Get works ! Tag: 387912
How to programmatically clear network passwords from IE
I run a web site (ASP) on the company intranet which I want to restrict
access to. A logon box is necessary since some computers are logged on
with "common" profiles.
Using IIS 6, I have set authentication method to Digest Auth which
communicates with Active Directory as wanted. I've remove anonymous
access and integrated Win auth. I've also set connection timeout to 30
seconds.
My problem is this:
1) User A successfully logs on to the site using his/hers network
password
2) User A leaves the computer without closing ALL Internet Explorer
windows
3) User B enters the site. The login box is pre-filled with user A's
username/password. User B only needs to click OK to enter the site.
I've tried changing the login settings under Authentication in IE, but
this doesn't help.
Is there a way to (preferably programmatically) clear the username and
password for the logon box? Tag: IIS post not working...Get works ! Tag: 387911
random 401.2 and 500 error
hi,
I have software in tens desktops, the software is developed in c# and
it trying to send XML stream to a server by POST mode to aspx file that
exist in some VD.
The sending is with the Httpwebrequest class, and the software is
running in local system permissions (service).
Also, the code contains htts authentication and it create
networkcredentials with some name and password.
In the server side - I have IIS 6 that get anonymous sessions, but
the VD permission is Integrated windows authentication only and in the
web.config file that contains in the VD, there is the tag with the
identity impersonate="true" and inside there is the same name and
password that the client sent in the http auth.
The clients are staying in WAN (nor LAN), and most of them sending the
stream with success , but some of them failed and got error from the
server - 401.2 (Logon failed due to server configuration) or 500
(Internal server error).
Anyone knows how could it happen?
I really appreciate any help,
Thanks,
Dov Tag: IIS post not working...Get works ! Tag: 387910
IIS 6.0: Migration tool syntax
Dear ALL,
I'm going to migrate about 200 web sites from IIS 5.0 to IIS 6.0
Migration tool seems to be easy to use, but I've take a look to the syntax
in order to change IP....
/serverbindings IP:port:hostheadername ....but if a web site has more than
one host header ?
Regards
Alberto
Brivio
--
tel. 011-5813734 Tag: IIS post not working...Get works ! Tag: 387909
IIS User rights problem
Hello,
I have a Windows XP Professional system which is connected to Domain
controller in Windows 2000 Server. I have installed IIS in Windows XP
Professional system. But my web designer who uses windows XP professional
can't see any directory when he runs IIS. For working he has to be in
Administrative group. I can't give administrative rights to the domain user
due to security reason. Is there any way I can remove the domain user from
administrative group and give access to him for running IIS?
Please help me.
Geo Tag: IIS post not working...Get works ! Tag: 387900
Unable to Debug on the web server
Hello,
I am a newbee to ASP.NET . Am using Windows Visual Web
Developer 2005 Express Edition. I created the a webservice yesterday
and hosted it on the IIS server version 6.0. directly from the IDE by
selecting 'http' as location of the project. When i try to run it by
pressing F5 i get and error saying "Couldnt debug cos debugging is
not enabled in the web config.... enable debugging ???"
To which i clicked 'YES' so it enabled the debugging.
Now i dont get that message but when i try to execute it by pressing F5
it says something like
"Web Server could not debug, The web server couldnt find the requested
resource."
So i tried to do it by pressing Ctrl+F5 (Execute without Debugging) ,
In this case a new Explorer window opened with the http 404 error
saying 'Requested resource not found.'
Can somebody please help me on this. The webservice code is correct as
it contains nothing but the only method that the IDE generates upon
creation and its running on my friends pc on IIS version 5.
Am using winxp service pack 2 Tag: IIS post not working...Get works ! Tag: 387899
PHP scripts, ASP or VBScript
I was asked today about enabling PHP on our IIS 6.0 server which has ASP
enabled already. This is installed on a Windows 2003 Enterprise Server with
all updates applied. After doing some research, it looks like I need to
install PHP on the server, which I'd rather not do. Can anyone give me a
heads up on this? I told the Web author to find ASP or VBscripts instead of
PHP, but if the majority of experts out there think I should install PHP and
enable these extensions, please say so. Otherwise, can someone please point
me in the right direction to find comparable ASP scripts to submit feedback
to a webmaster, etc...?
Thank to all...
Regards,
JoeF Tag: IIS post not working...Get works ! Tag: 387887
loging into our helpdesk website
all,
i just build this helpdesk server using IIS6, i would like the users to
just use their user ID and not have to put in the domain name how can i
do that
thx Tag: IIS post not working...Get works ! Tag: 387886
Creating an additional site
We currently have a site configured in IIS 5 (xyz.com) linked to its own IP
Address and pointing to its own directory (default.asp). We want to point
xyz.com/applications to a different directory with applications.asp file.
When someone types in www.xyz.com/applications it goes to the
applications.asp file. Is this possible and how should we configure this?
Thanks in advance. Tag: IIS post not working...Get works ! Tag: 387881
Creating Extra Website
Hi,
I have created a new Web site on my IIS server. This is in addition to the
default web site. Here are the details:
Domain name: testdomain.com
Server IP Address: 192.168.1.23
Servername: SRVR10
Host Header Name: relocation
Web site IP Address: "All Unasigned"
Port: 80
I have created a Host record in my local DNS and checked the box to create
the associated PTR record for relocation.testdomain.com for 192.168.1.23. I
then try to browse to relocation.testdomain.com and it doesn't work. Can
anyone tell me what else I need to do to access this website via
relocation.testdomain.com? By the way, the site has been started. I have
tried to set the websties IP address to 192.168.1.23 and restart it but it
didn't help.
TIA,
Jarryd Tag: IIS post not working...Get works ! Tag: 387880
MSI Install
I have two test environments running IIS 6.0 on both. In both environments i
have to drives, C: and E:
I didnt set these environmments up, something strange happens when
installing the same MSI (Web app).
In one environment it installs to C:Inetpub/wwwroot and in the other
environment it installs to E:inetpub/wwwroot!
Even if the E:Inetpub/wwwroot is deleted from the drive, when installing to
this machine it will create the directories and install!
What do i have to do to stop this happening. What is it that is affecting
this?
IIS on both machines have the same settings yet this strange thing happens?
Thanks
Stuart
Application Integrator Tag: IIS post not working...Get works ! Tag: 387878
Default Document Setting
Within my Intranet Site I set the Default Document setting to an asp page,
i.e Survey.asp. The page loads correctly, however, on submit the DLLHost.exe
uses all the CPU and the page hangs. However, if I type the URL in manually
in the Address Bar and click the submit button the page functions correctly.
Has anybody else experienced problems with the Default Document Setting. Tag: IIS post not working...Get works ! Tag: 387869
IIS6 + httphandlers + 404 error
Hi,
We recently moved from IIS5 to IIS6. I am running a ASP.net 1.1 web
app.
in the web.config file for the app there is the following entry under
httphandlers:
<add verb="*" path="*.ads"
type="Snippets.Publishing.Adverts.AdvertClickHandler,Snippets.Publishing.Adverts"
/>
<add verb="GET,HEAD"
path="*.jpg,*.gif,*.swf,*.pdf,*.css,*.htm,*.js,*.doc,*.mp3,*.zip,*.ico,*.txt"
type="System.Web.StaticFileHandler" />
<add verb="*" path="*.asp" type="System.Web.HttpForbiddenHandler" />
My problem is:
The ".ads" extension always returns a 404.2 error.
I have so far done the following:
1. Registered .ads in the MIME Types as application/octet-stream.
2. added the .ads extension to the web Application Config for the web
app, with the exectuable path pointing to:
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll with ALL
verbs allowed.
Is there something i need to add to web services extension node? This
is the only thing I can see that is different from IIS5 to IIS6.
Any help would be appreciated,
Regards
Matt Tag: IIS post not working...Get works ! Tag: 387868
Generating SSL Certificate For Testing
I would like to create a SSL cert for testing purposes for a website. How do
I go about doing that? Tag: IIS post not working...Get works ! Tag: 387867
System failure after IIS activation
Hi,
I recently activated IIS on my PC cause I would like to test some ASP pages
of my new site.
Well...after the activation, my system became slowly, and, at the end of
all, almost all of the application didn't even start!!
I was costricted to reboot several times, and I felt very nervous so....I
decided for a radical solutions..uninstall IIS services.
Now my PC is "reborn"..but , anyway, I cannot test my ASP pages as well.
What I have to do?....maybe improve the performance of my system (cpu= intel
celeron 2.66GHz - 512mb Ram - XP Pro x64 sp1).?
Or maybe...there's another solution?
Thanx in advance.
Konrad Tag: IIS post not working...Get works ! Tag: 387866
redirect from my winXP iis server to another webserver on the network
i have my little home network set up in the moment that a WIN XP is
connecting to the internet and shares it with all other computers on
the network.
on another computer i have set up my website. it's linux and the
web-site is php with mysql.
i do have a static ip address, and when i type it in, i can see my
winXP webserver. how an i redirect it, so it points to the linux web
server.
i have IIS set up on the winXP, and i try to redirect in properties,
but i can't make the connection. sometimes i am asked for a password
when i try to access the web-site over the internet, or it does not
work at all.
any help apretiated.
dimitri Tag: IIS post not working...Get works ! Tag: 387865
utf-8 charset problem
my page is server by IIS (on a winXP SP2) which contains this:
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
and the request is made by C# .Net 2.0 with this code:
webrq.Headers.Add(HttpRequestHeader.AcceptCharset, Encoding.UTF8.WebName);
but the
HttpWebResponse.CharacterSet = "ISO-8859-1"
any1 can say why? and how can detect the char set correctly the response
header is as follows:
HttpWebResponse.Headers =
{Accept-Ranges: bytes
Content-Length: 8609
Content-Type: text/html
Date: Mon, 25 Sep 2006 07:44:11 GMT
ETag: "3a51249e792c61:900"
Last-Modified: Sun, 18 Jun 2006 14:55:48 GMT
Server: Microsoft-IIS/5.1
X-Powered-By: ASP.NET
} System.Net.WebHeaderCollection Tag: IIS post not working...Get works ! Tag: 387856
Virtual Directory properties
Hello,
I want to read virtual directory properties by my program (.Net).
Is this possible?
Thanks
Mehdi Tag: IIS post not working...Get works ! Tag: 387855
HcScriptFileExtensions restes after reboot
i have iis 6.0 on windows 2003 server. every time i reboot the computer,
HcScriptFileExtensions parameter of the gzip compression scheme in the iis
metabase resets to empty string: HcScriptFileExtensions="".
this only happens to the HcScriptFileExtensions parameter of the gzip
compression scheme, but not deflate, and only when i reboot the computer. if
i restart www publishing service, or even iis admin service,
HcScriptFileExtensions is not affected and stays as i set it (by manually
editing the metabase): HcScriptFileExtensions="asp".
any help will be appreciated
andrew Tag: IIS post not working...Get works ! Tag: 387854
asp classic app moved to IIS 6 slow/failing
Hi All,
I have several classic asp pages in site that were originally programmed
with Visual Interdev (or Visual Web Developer Alpha... remember that?). The
pages use the Script Library objects for Recordset and Data Grid
functionality. The database is an Access mdb file that we connect to.
The app was recently moved from a Windows 2000, IIS 5 server to a Windows
2003 IIS 6 server. The permissions, database connections info etc was
duplicated on the new server. The application works... However, the database
access/grid page will occasionally work, but most often now takes so long to
process that we receive a timeout in the app. We have not changed the
programming, and on some occasions the page will execute quickly. It seems
that the first accesses of the page can be quick, but subsequent requests
can slow down so much we get the timeout, and this plain english (default
error I think):
"An error occurred on the server when processing the URL. Please contact the
system administrator."
In the IIS log file for the site, it includes the following error for the
post request:
POST /search_dir/Default.asp |-|ASP_0113|Script_timed_out 80
Does anyone have any ideas on what could be choking the asp/MS Access
application.
K Waldron Tag: IIS post not working...Get works ! Tag: 387853
IIS 6 and Anonymous on Windows Server 2003
I have a brand spanking fresh install of IIS on Windows Server 2003 R2.
It has anonymous access enabled on the default website and NOT
integrated windows authentication. I only want anonymous access.
I have made sure that the Anonymous account (IUSR_computername) has
Read, "Read & Execute" and "List Folder Contents" on the
Inetpub\wwwroot folder.
I cannot get the iisstart.htm webpage to load (it is one of the default
documents in IIS). I keep getting 401.1 errors.
Any ideas on why IIS is being so difficult? And how I might resolve
this problem?
Thanks. Tag: IIS post not working...Get works ! Tag: 387846
Looking for configuration settings
I don't have a whole lot of IIS experience and I need to find where
some settings are stored and figured the good people here could help.
There are 2 main things I am looking for and if you can provide help on
either that would be great.
1. I need to know where IIS stores it's settings (files or registry
pointers would be great), such as:
NTFS permission settings
IIS Application Setting: Execute Permissions
W3C Extended Logging Format EXTENDED property
Parent Paths <..>
Index Server is enabled/disabled
Directory browsing
IIS "Basic" authentication
Etc.
2. If you know of any command line tools to query for the above
information *remotely*. Tag: IIS post not working...Get works ! Tag: 387844
Content and scripts on network share
Hi, everyone,
I'm trying to set up an IIS server so that the content for one site
will be stored on a remote file server. Unfortunately, I seem to be
having some authentication problems in that configuration, so I'm
hoping that someone here will have some insight.
Here's the setup:
Web server running IIS 6 on Windows 2003 SP 1
File server running Windows 2000 AS SP 4 (IIS is NOT installed)
Both servers are in the same Active Directory domain, and I want to use
Windows authentication to connect to the site. The Web content
contains ASP scripts.
When I try to connect, I get 401 Forbidden errors indicating, among
other things, that an ACL is present on the resource.
I've done some digging around, but I haven't found any effective
solution.
Any thoughts?
Thanks,
Tom Tag: IIS post not working...Get works ! Tag: 387843
website referrals
I have a little problem. I've got 3 domain controllers so all three have the
same IP address. One is hosting a website. From inside our building, users
may get any of those three servers and I need to have them get the one
hosting the website when they make a request.
I thought I could just set up IIS on the other two servers and then "refer"
requests back to the right server. That does work but the problem is that
sometimes the website request includes additional string information and I
can't figure out if it is possible to set up the referral to pass that info
along.
For example: corp.company.com/website1 and I refer that to
192.168.0.10/website1. That works fine.
The issue is requests can come in
corp.company.com/website1/login.asp?IDProject=2&IDFeedback=5162. My referal
right now then just sends them to 192.168.0.10/website1.
Is there anyway to have the referal append the other stuff that came in with
the original request?
THX!!
Mark Tag: IIS post not working...Get works ! Tag: 387840
IIS Setup Issues
Howdy-
I need some help in getting my web page to serve under VISTA RC-1. I have
successfully installed IIS. I select the correct directory, I:/GradyGroup
(starting is index.htm). When I go to IIS and select Edit Site->Settings I
see STATUS: Started, BINDING: *80(http), and PATH: I:/GradyGroup.
Thinking this may be a firewall issue, I set up Windows Firewall to allow
Port 80 incoming- that did not work. Then I turned the firewall OFF- that
did not work.
Web page is not visiable (CANNOT DISPLAY WEBPAGE error).
I am stuckâ??any ideas
Thanks Tag: IIS post not working...Get works ! Tag: 387839
IIS6: Wildcard Application Maps, Default Content Pages and Basic Authentication
There is an apparent issue with IIS when the following situation occurs:
* A vdir has default content page enabled (which is the default, look under
documents tab)
* the vdir uses basic authentication
* the vdir's application configuration has a wildcard application map
defined
under these conditions, the basic authentication base64 encoded user:pwd
information normally found the http headers via Request.Headers and
Request.ServerVariables is not there.
-LZ Tag: IIS post not working...Get works ! Tag: 387837
HTTP Error 401.1 - Unauthorized: Access
Hi
Any one can help me to get rid for the following error message - HTTP Error
401.1 - Unauthorized: Access
I am explain the setup first
Server1: Windows 2000 SP4 - Domain Controller with Active directory the
Domain Name is ABC
Server2: Windows 2003 SP1 - Microsoft Dynamics - With Named SQL Server
Server3: Windows 2003 SP1 - IIS, Windows Share Point Server, Business Portal
The entire servers are added to domain ABC.
In the domain we are having following user
User1 - Domain User
User2 - Domain User
We installed the BP in the server 3 logged in as ABC\Administrator. We
followed the BusinessPortalInstallation.pdf document. While installing the
BP we uncheck the option use enhance security for administration pages in
web site configuration (refer the Step 9 page 43
BusinessPortalInstallation.pdf). While Installation we added sample user
also.
After the successful installation we added the domain users, user1 and user2
thru Site Settings => Mange Portal User.
User1 was assigned as site administrator and user2 as employee user.
I can able access the web site in the server 3
Now the problem is I can't able to access web site as a any domain user from
any client or server even though we followed the client setup procedure in
the chapter 14 in BusinessPortalInstallation.pdf
Assume that I logged in the Server2 as domain administrator as
ABC\Administrator. Which is the same user installed the BP in server3. Now I
give the URL in IE It is prompting for the username password with prompting
windows as connecting to Server3.ABC.com we had given the user id as
ABC\Administrator and password which is prompted for 3 times and throw this
following message
You do not have permission to view this directory or page using the
credentials that you supplied. HTTP Error 401.1 - Unauthorized: Access is
denied due to invalid credentials. Internet Information Services (IIS)"
Also it is not allowing any domain users (User1 and User2) it is giving the
same error message
But I can able to access the web site from server2 as any Sample User which
was created in the installation. It seems that the user are locally
available in the server3 is allowed to access from any PC to confirm this we
created the user3 in the serever3 (not in the server1 domain) and we added
this user in the site settings=>Mange Portal User as site administrator
user.
Now from the Server2 we try to access the web site when it is prompting for
the userid we given as Server3\user3 and the respective password then the
site is loading I can go to all the web pages but form here as portal
administrator if we try to add or delete any user it is giving the script
error message.
From this we clearly understand that the IIS in server3 is not allowing
accessing any domain user to access the web site. So will you please help us
to how can we fix this problem
Please reply at the earliest
Regards
Nizham Tag: IIS post not working...Get works ! Tag: 387836
createobject fails - help!
I'd appreciate any help with this. It's really important that I get it
working right!
I'm fairly new to IIS. I've used different open source servers in the
past, but now I have to write a program that can be migrated from IIS
5.1 under Windows XP Pro to IIS 6 under Windows Server 2003 (I'm
migrating it because I can run IIS 5.1 on my computer now to test
things, but if there's any reason I should just throw it on IIS 6 in
the first place let me know - for the most part I'm using simple ASP
scripts).
Anyway -
I've got a simple com server that I need one of my asp pages to access
using createobject. If I run the ASP pages under my account, with
authentication through the server, the com application fires up just
fine. When I switch over to the anonymous IUSR accound, I keep getting
this ASP error:
Error Type:
Microsoft VBScript runtime (0x800A0046)
Permission denied: 'CreateObject'
The com server, by the way, is an MFC app written in VC++.net.
I really need this to work. I gave the IUSR account read/write access
to the directory with the com app in it, but that didn't seem to work.
I'd really appeciate any hints!!!! Do I need to run this as a service?
If the com server is run in the background or under the sys account,
what can I set in the MFC app to keep it the object from dissapearing
after the page is done with it? Tag: IIS post not working...Get works ! Tag: 387835
CGI Application misbehaved, incomplete headers
I am experiencing the problem described here:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;884764
Specifically, the problem occurs when I am trying to access a PHP page which
runs an application with exec(). It has occurred before on other pages, but
I haven't noticed it for a while.
Microsoft has a patch for IIS here: http://support.microsoft.com/kb/839229/
Would they charge $100 for the support email to get the patch?
Does anyone know a different solution to this problem? There's a lot of
stuff on Google, but nothing I have seen has solved it. Tag: IIS post not working...Get works ! Tag: 387834
how to diagnose slow running IIS
IIS6 is running very slow when serving aspx pages connected to sql server
2005 on win2k3 x64 edition.
(IIS is also on x64)
Pages take about 5 seconds to load, used to be instantaneous, none database
connected pages run great.
any pointers on where to look or how to tune ?
cheers
mark Tag: IIS post not working...Get works ! Tag: 387833
Using a different SSL port seamlessly
I want my IIS site to use a port other than 443 for SSL, but I don't want my
users to have to type port numbers in when entering the URL.
How can I avoid this and have it on a different port without users needing
to know or enter port numbers? Tag: IIS post not working...Get works ! Tag: 387830
w3wp.exe not responding when memory usage exceed 800M?
Hi,
I've got a webserver and increasingly number of users, I noticed almost each
time more than 50 users connected and the IIS worker process memory usage
will climb up to 800MB or even more than 1,000MB.
This causes the application stop responding with "OutOfMemory exception" or
"Server application unavailable"
sometimes I need to stop/start the www service if stop/start the site
doesn't work, because recycling the application pool is just not responding,
w3wp.exe seems dead.
Does anyone have any ideas, thanks,
Chris Tag: IIS post not working...Get works ! Tag: 387829
World Wide Web Publishing Service error (Event ID 7023)
We set up Outlook Web Access on our Exchange Server 2003 machine
yesterday (running Windows 2003). SSL and form based login were
enabled, the certificate issued by an internal CA.
Everything worked fine all day. Overnight (at 8pm) about 20 minutes
after we checked Outlook Web Access from home. We got the following
error:
Event Type: Error
Event Source: W3SVC
Event Category: None
Event ID: 1036
Date: 21/09/2006
Time: 20:04:12
User: N/A
Computer: CHARLIE
Description:
A failure occurred while initializing the configuration manager for the
World Wide Web Publishing Service. The data field contains the error
number.
Data:
0000: 800706ba
Followed by;
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7023
Date: 21/09/2006
Time: 20:04:14
User: N/A
Computer: CHARLIE
Description:
The World Wide Web Publishing Service service terminated with the
following error:
The RPC server is unavailable.
And the web page stopped loading (Page Cannot be Displayed). In the
morning we went to services, started the World Wide Web Publishing
Service and it is working fine (for an hour now).
We need out Outlook Web Access to be reliable, and since we dont know
why it stopped working we cant trust it at the moment. We are already
fighting a 'reliability battle' with some high profile users who will
insist on continuing to use their own POP3 accounts if Outlook Web
Access doesn't prove itself to them as a valid alternative.
Could anyone shed any light on the possible reason for these errors?
What is the RPC server? Tag: IIS post not working...Get works ! Tag: 387827
Large Attachments are being Sent as Empty Files
Hi, I am using the ASP.NET MailMessage object to send email and attachment
via IIS SMTP. It works fine when the attachement is, say, 10 KB in size, but
if the file which I want to attach is, say, 1 MB then it will be sent but the
attachment will be empty. Is there a reason why larger files are "emptied"
with IIS SMTP?
Thanks,
John Tag: IIS post not working...Get works ! Tag: 387822
Can we match the time on the IIS log to ours?
Hi all,
I do not know the time zone used in the IIS log. Is there a way to change
the time zone to the timw zone we live in (Eastern time zone)?
Thanks. Tag: IIS post not working...Get works ! Tag: 387820
Can't make IIS listen on only one IP
I have a Server 2003 SP1 machine with all the latest updates. IIS is
running on on this machine and I have 7 virtual websites set up. I have
added a second static IP address to one NIC I have in the machine. I
need to make IIS listen on only the first IP address and not the second.
Here is what I have done:
1) Went to every website and changed the ip address in the pull down to
the second IP address. This didn't work.
2) Stopped IIS (using iisreset /stop) and issued the command:
"httpcfg set iplisten -i <second ip address>" This returned:
"HttpSetServiceConfiguration completed with 0.".
I then issued the command "httpcfg query iplisten". This returned:
IP : <first ip address>
--------------------------------------
Started IIS (suing iisreset /start).
This didn't work
3) Stopped IIS (using iisreset /stop) and issued the command:
"cscript adsutil.vbs set w3svc/disablesocketpooling true" This returned:
disablesocketpooling : (BOOLEAN) True
I then issued the command:
"httpcfg set iplisten -i <second ip address>" This returned:
"HttpSetServiceConfiguration completed with 0.".
I then issued the command "httpcfg query iplisten". This returned:
IP : <first ip address>
--------------------------------------
Started IIS (suing iisreset /start).
This didn't work
To confirm that IIS was still listening to the second IP address, I
pointed a web browser on a machine on the same network to the second IP
address. When I returned "Bad Request (Invalid Hostname)", I knew that
IIS was answering.
Anyone have any ideas?
TIA Tag: IIS post not working...Get works ! Tag: 387818
HTTP Compression Problem
I have enabled HTTP Compression on my IIS 5.0 Server and selected "compress
static files" only. I have also configured the metabase to compress the "dll"
ext for static files.
i.e. cscript.exe adsutil.vbs set
W3Svc/Filters/Compression/GZIP/HcFileExtensions "txt" "dat" "xml" "dll"
Problem is IIS is compressing an ISAPI DLL that I already had installed.
(this is an ISAPI_Redirector dll for apache) I can see the dll file in "IIS
Temporary Compressed Files" folder.
This problem does not occur on IIS 6.0 (Win2003 Server) only on my IIS 5.0
(Win 2000 Server)
Any ideas? Tag: IIS post not working...Get works ! Tag: 387817
indexing 100% CPU
Is it possible to use Microsoft Indexing server to index a web site without
it using 100% processing of the CPU its running on? Every article I have
seen about fixing this says to disable the indexing service. Well if I am
using it I can't disable it. There must be a fix or something that stops it
from hogging up the cpu.
Thanks for any suggestions.
Bob Tag: IIS post not working...Get works ! Tag: 387814
HcScriptFileExtensions restes after reboot
i have iis 6.0 on windows 2003 server. every time i reboot the computer,
HcScriptFileExtensions parameter of the gzip compression scheme in the iis
metabase resets to empty string: HcScriptFileExtensions="".
this only happens to the HcScriptFileExtensions parameter of the gzip
compression scheme, but not deflate, and only when i reboot the computer. if
i restart www publishing service, or even iis admin service,
HcScriptFileExtensions is not affected and stays as i set it (by manually
editing the metabase): HcScriptFileExtensions="asp".
any help will be appreciated
andrew Tag: IIS post not working...Get works ! Tag: 387813
Search Link Problem
Windows 2003
In IIS I created MyWeb with a host header of MyWeb (no dns, management's
"temporary" solution) with Home directory located at C:\MyWeb
Created MyWeb Index. In "Query the Catalog" I see the query working
correctly. But when I mouse over the link I notice the link as
file:///c:/MyWeb/Folder1/WebPage01.htm.
At the web site the search also seems to work well. I get correct results
for the search word but when I click on the links I get a "The Page Cannot
be displayed" error. When I mouse over the link it shows the
file:///c:/MyWeb/Folder1/WebPage01.htm instead of the
http://MyWeb/Folder1/WebPage01.htm
Is this an indexing server problem, an IIS problem or a mix of both?
How do I correct this? ANY help would be appreciated. Thanks
PJ Tag: IIS post not working...Get works ! Tag: 387812
I have W2K machine with SP4...I have few ASP pages...Post does not work but
Get works...what could be the problem...
"abcd" <abcd@abcd.com> wrote in message
news:u4wRpJc4GHA.3964@TK2MSFTNGP04.phx.gbl...
> I have W2K machine with SP4...I have few ASP pages...Post does not work
but
> Get works...what could be the problem...
>
> any clues
You are the one holding the clues. 'Post does not work' is not much of a
clue. In what way does it fail to work? Do you get an error? what does the
error say?