Hiding Urls In Browser Windows
Is their a way to set up a web site so that website urls are not displayed
including querystrings. Instead all that is seen in the domain name like.
www.mydomain.com
Answers appreciated !!! Tag: Save IIS Tag: 333008
Internet Data Connector
Hello,
I am having a little trouble in the web department and was
wondering if the internet data connector needed to be
enabled for my problem to go away?
w2k3 enterprise edition. I am using the indexing service
and inserting a search funtion/form in my web with FP 2003
and I don't seem to be able to get it to show up in the
browser. Would the internet data conector be needed here
for FPSE to communicate with FPSE? I presently have it
turned off. This would be an INTERET web.
Thank you
Joe Tag: Save IIS Tag: 333003
Digest Authentication
Hi
I'm running IIS 5.x on a stand-alone windows 2000 pro connected to the
internet with all the latest security patches installed and using Zone
Alarm Pro as firewall. I have no PDC or BDC for that matter.
When I check the box Integrated Windows authentication in the
authentication window it takes forever to load the asp 3.0 page. But
when I check the box Basic authentication?. instead the asp pages
loads almost immediately. The box Digest Authentication is checked but
grayed out and cannot be changed at least not from this window.
My first question. Am I running an Active Directory Server? As I have
read that this has something to do with Digest Authentication. I don't
think so but how can I disable it. And is this the reason for the lag?
Here are the NTFS permissions on the folder which is not buy the way
is located under wwwroot but on an other partition
Admin full
IUSR read & execute & write
IWAM read & execute & write
NETWORK read & execute
SYSTEM full
Here are some particulars for the Virtual Directory
The designated directory
Scripts source access
read
write
This is NOT an application but a more secure folder under the root.
Execute permissions Scripts Only
My second questing is. Why does the users/clients get the login
window? Didn't I give the permissions
for anonymous access to the website with above settings?
My third second question which might not belong here but I'm trying:
Does asp pages writing to a database always need the write permission
on the folder & virtual directory?
Many thanks for your reply and attention to this matter on beforehand. Tag: Save IIS Tag: 333002
IIS problem not a problem in Web Matrix Server
I'm having the craziest problem.....Any .aspx page I make
that I then run through IIS I get an error saying "Login
failed for user 'machinename\ASPNET'" but if I run the
exact same page through the WebMatrix server the page
loads with the pulled data without a hitch.
I've tried everything I can think of. It's NOT a problem
with SQL Server (obviously) but I've made doubly sure of
that by checking the user rights in Enterprise Manager.
Please...if anyone can suggest something other than re-
installing everything.....!! Tag: Save IIS Tag: 332993
Form responses do not write to database
I created a form in FrontPage 2002 that I could post on the Web so that users could answer a questionnaire and so that I could compile their responses into an Access database
When I tested it the form seemed to work. I received a confirmation page with my answers. However, the data did not write into the database. I clicked form properties and created the database table there and let it save to the default fpdb folder
My server runs NT 4.0 with SP6. It has IE 5, MDAC 2.5, asp ver. 4.02.0785, MMC Version 4.0 (Build 1381: SP6) Version 1.0 Release, and IIS 3.0 (I think -- cannot find version on this). I have FrontPage 2002 installed on server, but do not have Access installed on server.
Does anyone know why my information is not writing to the db?
Thanks
Susan Tag: Save IIS Tag: 332990
Can IIS track file changes?
I am writing an application that responds when files (html, asp) are changed
on an IIS web site - for example if someone edits the file. Is there any way
to have IIS monitor the changes and create a notification?
--
Peter Aitken
Remove the crap from my email address before using. Tag: Save IIS Tag: 332976
Renaming IIS 5.0 Server
We are going through a naming standardzation process for all of our systems
here and this will be affecting some servers. One of these is our IIS 5.0
server. What are the primary items that will need to be reviewed for this
system. I am familiar with standard File/Print/Application servers but I
have not don much in the way of IIS server administration other than the
typical security and intial setup.
Thanks
Ken Tag: Save IIS Tag: 332975
Forward smtp to a different port on same server
I'vew read that it is possible, but I don't see how to configure it. IIS
5 - spam filter bound to virtual smtp server on port 25, want to forward
to Webshield virus filter on port 26. Smarthost config doesn't allow
port number entry.
thanks,
Garry McMinds Tag: Save IIS Tag: 332968
no frontpage extensions in WinXP pro IIS 5.1 ???
Hello,
I have had a very simple website for about 18 months on my computer under
winxp pro, running IIS with all default settings.
I now installed Frontpage 2003 and made another simple website using a
FP2003 template, and replaced the wwwroot folder contents. I can access my
new website correctly locally and from other machines on my home network and
also from work, but when I want to start a "search", I get an answer telling
me that my server doesn't have frontpage server extensions installed.
I uploaded my whole site to my ISP who doesn't support FP server extensions
and I get the same message, so I know the extensions are not installed on my
computer either. Since my website should only be available in the end on my
home local network, how do I install those extensions on my home computer
???
I tried uninstalling and reinstalling IIS with all options, without success.
Here is the link to the site I created from the template, so you know what I
mean. Try the page "Recherche".
http://mypage.bluewin.ch/lorenzo.sandini/index.htm
Thank you
Lorenzo Tag: Save IIS Tag: 332963
Metabase Explorer (iis6) from Metaedit2.2 (iis5).. Import Just web sites from txt.
Hello.
I am trying to just import websites only from a iis5 web server (using
metaedit) to an iis6 web server using (metaexplorer since metaedit2.2.
wont work). All I want is the website info.. Ie. export text file only
from metaedit. I want to import that text file into metabase explorer,
but that is no longer an option. Is there a work around for this?
Again, I just want the websites, and none of the metabase stuff..
Thanks, Tag: Save IIS Tag: 332953
Corrupt ZIP files on download
Hello,
I tried asking this in the SharePoint group but got response.
I have a very weird problem. I upload a zip file to a SharePoint document
library and then download it to my desktop and the file is corrupt. This
only happens with ZIP files. If I rename the file with extension .ZIG I can
upload it and then download it OK. After I rename the file back to a .ZIP
extention I can expand the archive OK.
Anyone know what the problem might be?
Thanks,
Brent Eldstrom
Firestream Software Designs Tag: Save IIS Tag: 332952
IIS 6 cannot find image
Hi,
A standard html page contains an image, for example:
<img src="images/logo.gif" >
The image was modified and replaced in the correct directory, however,
doesn't display.
Renaming the image to 'logo2.gif', such that
<img src="images/logo2.gif" > corrects the problem.
What is causing this? Tag: Save IIS Tag: 332948
My IIS server is not working correctly anymore
My IIS server is not working correctly anymore. I cannot open my root site
(on my computer) I get the following message:
the server unexpectedly closed the connection.
When I look into the EVENT VIEWER I have the following
1) INFORMATION:
Event Type: Information
Event Source: COM+
Event Category: (117)
Event ID: 778
Date: 7/5/2004
Time: 7:03:05 ìì
User: N/A
Computer: KENNY-XP
Description:
Application image dump failed.
Server Application ID: {3D14228C-FBE1-11D0-995D-00C04FD919C1}
Server Application Instance ID:
{E4FE98E6-AD4F-415E-A764-C1914DB092BF}
Server Application Name: IIS In-Process Applications
Error Code = 0x80004005 : Unspecified error
COM+ Services Internals Information:
File: d:\nt_qxp\com\com1x\src\shared\util\svcerr.cpp, Line: 1259
Comsvcs.dll file version: ENU 2001.12.4414.53 shp
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
____________________________________
2) ERROR:
The run-time environment has detected an inconsistency in its internal
state. This indicates a potential instability in the process that could be
caused by the custom components running in the COM+ application, the
components they make use of, or other factors. Error in
d:\nt_qxp\com\com1x\src\comsvcs\package\cpackage.cpp(1184), hr = 80080005:
InitEventCollector failed
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Heelllppppp!!!
--
"Any sufficiently advanced technology is indistinguishable from magic"
***Arthur C. Clarke***
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.677 / Virus Database: 439 - Release Date: 4/5/2004 Tag: Save IIS Tag: 332947
Copy IIS setting from one computer to the next.
I would like to copy all the iis settings on 1 server to another. Is there a tool or methhod to do this. I don't want to have to set up each on individually. Both are IIS 5 on a windows advance server Tag: Save IIS Tag: 332944
IIS 5.0 cs-method blank
I am trying to investigate some 500 errors that have been occuring for
a while on our web server. I would like to determine the possibilities
in which log file entries have a blank cs-method field. I am not sure
if there are hack attempts or spiders. We are using windows 2000
server with IIS 5.0. Please advise. Your insight and expertise will be
much appreciated.
As a reference to our IIS log files I am listing some of the log
entries that I wish to interpret.
date time c-ip cs-username s-ip s-port cs-method cs-uri-stem
cs-uri-query sc-status time-taken cs(User-Agent) cs(Cookie)
cs(Referer)
2004-04-21 02:41:12 203.116.15.241 - 205.142.198.37 80 - - - 500 266 -
- -
2004-04-21 05:25:31 10.11.50.37 - 205.142.198.37 80 - - - 500 0 - - -
2004-04-21 02:08:59 10.2.60.53 - 205.142.198.37 80 - - - 500 0 - - -
2004-04-21 02:16:59 68.172.176.88 - 205.142.198.37 80 - - - 500 906 -
- -
2004-04-21 08:16:11 10.11.50.44 - 205.142.198.37 80 - - - 500 0 - - - Tag: Save IIS Tag: 332943
Single OWA for Multiple Exchange 2K ?
We are migrating from one Exchange server to another one. Due to the size
of and number of mailboxes, it will take about a month to do this. Is there
a way that we can point the users to a single instance of OWA to get to
their email regardless of the server it is on ? I havent found a way to do
this yet by looking on the MS Sites.
Thanks,
Ron Tag: Save IIS Tag: 332938
Using Inet in ASP
Hello,
I have developed an ASP page that checks for page/domain availability
before performing a Response.Redirect to it.
This is done by using InetCtls (Set inetTest =
Server.CreateObject("InetCtls.Inet.1")).
Now, I would like to handle the StateChanged event (to check, for example,
for possible DNS errors) but, as I guessed, it's not as easy as in VB, in
which this event
would be handled by the Sub inetTest_StateChanged (...).
So, the question is: is it possible to handle events (in this case,
StateChanged) in ASP?
Any help would be greatly appreciated.
Erasmo Proietti. Tag: Save IIS Tag: 332934
Vpn Setup
want to know where i can find the procedures how to setup
VPN? do i must had static ip address from both end?
thanks
jay Tag: Save IIS Tag: 332933
www service and inetinfo
I'm having trouble with IIS - every time I start up the WWW service sits
there "starting" unless I kill inetinfo, then all is fine. Any ideas? I've
tried re-install etc. Tag: Save IIS Tag: 332931
Issues with GPRS
We have a few well established web database applications
that have always been used by our office staff with no
problems. Majority are running on IIS6 and are .net sites.
We now need to make these applications accessible to field
staff and so invested in a load of GPRS cards for their
laptops only to find that .net apps do not appear to work
when run over GPRS. Multiple errors occur, normally along
the lines of server_response_close - The server closed the
connection while reading the response.
This mainly seems to be for .net apps, our .asp 3.0 apps
seem to perform not too badly.
Anyone else come across this? Why GPRS? the slower GMS
standard seems to work fine. I've seen a few papers
published by Cambridge Uni on this issue which relate it
to latency in GPRS, but nothing else, it appears not to be
recognised issue. Tag: Save IIS Tag: 332922
Close Web User Connection
Hi
I made a web site with SSL. I want to do a logOFF Page that disconnect the
user.
The user get access with a base autentication, in a domain and in an
autentication area.
May i do it ?
Cordially
--
..::M::O::R::B::I::L::L::O::.. Tag: Save IIS Tag: 332915
HTTP 500 - Internal server error
I have w2k with sp4 as Domain Controller, when I access my
server via IE its shows following screen.
The page cannot be displayed
There is a problem with the page you are trying to reach
and it cannot be displayed.
-----------------------------------------
Please try the following:
Open the authsrv home page, and then look for links to the
information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
I add/remove IIS numbers of time, but problem is exist.
Please give a solution of it.
Thanks. Tag: Save IIS Tag: 332914
My First ASP.Net Application
Hello, I just got through installing the .Net Framework on my Windows 2000
Server machine and I am wondering if there is something else I must do to
begin installing a ASP.Net appliction?
I have read one article on the web which states that I must get a command
line prompt and type the following:
%windir%Microsoft .NET\Framework\V1.1.4322\aspnet_isapi.dll -i
and then enter
regsvt32%windir%windir%Microsoft.Net\Framwork\v1.1.4322\aspnet_isapi.dll
Is this necessary?
When I move the application to the server, there is an option in VS.Net
which allows you to move the application...Is there some authority setting
that I need to set in order to move the application?
If I do it manually, there are two option that I see when I right click on
the default Web site...I can create an "Application" or I can create a
virtual folder. I am guessing that if I create an application is can use
"DNS" name to get to my application, where as if I use a virtual directory,
I would no be able to use DNS? Is that correct? The must be some reason
why I would want to create an application and then a vitrual folder under
the application vs. just creating a virtual directory.
I would very much appreciate your input!!
Thanks in advance for your assistance!!!!! Tag: Save IIS Tag: 332912
SelfSSL with more than one virtual server
Hello
I am using IIS6.0 on W3K and I am trying to add Certificates with SelfSSL to
different web sites.
I created a cert for every Website but I noticed that only the most recent
is working. Can anybody help.
Here ist what SSLdiag says:
System time: Fri, 07 May 2004 11:04:02 GMT
ModuleFileName: E:\IIS6RK\SSLDiag\ssldiag.exe
OS: Windows 2003
IIS6 - World Wide Web Publishing (W3SVC) service is installed
[ HKLM\System\CurrentControlSet\Services\HTTPFilter ]
ImagePath = C:\WINDOWS\system32\lsass.exe
Parameters\CertChainCacheOnlyUrlRetrieval = True(default)
strmfilt.dll loaded into process 780 (lsass.exe)
[ SChannel Info ]
ServerCacheEntries = 54
ServerActiveEntries = 0
ServerHandshakes = 86
ServerReconnects = 9
CacheSize = 10000
[ W3SVC/1 ]
ServerComment = Default Web Site
ServerAutoStart = True
ServerState = Server started
[ W3SVC/1/ROOT/_layouts ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/1/ROOT/_layouts/images ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/1/ROOT/_vti_bin ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/1/ROOT/_wpresources ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/2 ]
ServerComment = SharePoint Central Administration
ServerState = Server started
[ W3SVC/2/Root/_vti_adm ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/2/Root/help ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/2/Root/images ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/3 ]
ServerComment = WSS1 Trial Site
ServerAutoStart = True
ServerState = Server started
#Could not impersonate server account
SSLCertHash = be 71 15 3b 12 de f0 7d cf 22 73 da 84 b5 16 df e2 9b e2 d3
SSLStoreName = MY
#CertName = wss1
#You have a private key that corresponds to this certificate
#ContainerName='SELFSSL'
#ProvName='Microsoft RSA SChannel Cryptographic Provider'
ProvType=PROV_RSA_SCHANNEL KeySpec=AT_KEYEXCHANGE
#Subject: CN=wss1
#Issuer: CN=wss1
#Validity: From 5/7/2004 12:59:15 PM To 3/16/2014 12:59:15 PM
SecureBindings = :4431:
[ W3SVC/3/root ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/4 ]
ServerComment = WSS2 Trial Site
ServerAutoStart = True
ServerState = Server started
#Could not impersonate server account
SSLCertHash = 78 b2 42 f8 b7 5e 21 3e 2f 67 55 37 7f 98 23 e4 09 37 6d 29
SSLStoreName = MY
#CertName = wss2
#WARNING: You have a private key that corresponds to this certificate but
CryptAcquireCertificatePrivateKey failed
#Subject: CN=wss2
#Issuer: CN=wss2
#Validity: From 5/7/2004 10:42:03 AM To 3/16/2014 10:42:03 AM
SecureBindings = :4432:
[ W3SVC/4/root ]
AccessSSLFlags = 8 (0x8)
#WARNING:AccessSSL = True (resource inaccessible due to SSL does not work on
this website)
AccessSSL128 = False
AccessSSLNegotiateCert = False
AccessSSLRequireCert = False
AccessSSLMapCert = False
[ W3SVC/5 ]
ServerComment = WSS3 Trial Site
ServerAutoStart = True
ServerState = Server started
#Could not impersonate server account
SSLCertHash = bf 8b e9 4a 66 12 c2 42 7a 9e 74 73 5a e2 85 13 1a 24 af 0e
SSLStoreName = MY
#CertName = wss3
#WARNING: You have a private key that corresponds to this certificate but
CryptAcquireCertificatePrivateKey failed
#Subject: CN=wss3
#Issuer: CN=wss3
#Validity: From 5/7/2004 11:00:33 AM To 3/16/2014 11:00:33 AM
SecureBindings = :4433:
[ W3SVC/5/root ]
AccessSSLFlags = 8 (0x8)
#WARNING:AccessSSL = True (resource inaccessible due to SSL does not work on
this website)
AccessSSL128 = False
AccessSSLNegotiateCert = False
AccessSSLRequireCert = False
AccessSSLMapCert = False
[ W3SVC/6 ]
ServerComment = WSS4 Trial Site
ServerAutoStart = True
ServerState = Server started
#Could not impersonate server account
SSLCertHash = b4 c8 4c f7 82 bb 3c f2 e8 36 4e c2 7c 21 9e 4a 20 96 80 6b
SSLStoreName = MY
#CertName = wss4
#WARNING: You have a private key that corresponds to this certificate but
CryptAcquireCertificatePrivateKey failed
#Subject: CN=wss4
#Issuer: CN=wss4
#Validity: From 5/7/2004 12:39:49 PM To 3/16/2014 12:39:49 PM
SecureBindings = :4434:
[ W3SVC/6/root ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/7 ]
ServerComment = WSS5 Trial Site
ServerAutoStart = True
ServerState = Server started
[ W3SVC/8 ]
ServerComment = Star Crew Site
ServerAutoStart = True
ServerState = Server started
[ W3SVC/8/root/_layouts ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/8/root/_layouts/images ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/8/root/_vti_bin ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/8/root/_wpresources ]
AccessSSLFlags = 0 (0x0)
[ W3SVC/9 ]
ServerComment = WSS Demo Site
ServerAutoStart = True
ServerState = Server started
Any hint appreciated. Thank you
Emil Tag: Save IIS Tag: 332909
Setting up IIS
I'm sorry to put this on here and feel really stupid! But
I have installed IIS and everything works fine on my LAN.
However I want to turn my LAN server into a Webserver so I
have activited port 80 on my hub/swith/router. however
when I type in the router IP address with what I believe
the path should be I get a timeout error!
any suggestions greatlly aprecaited (preferably by
emailing answers to me!)
Sorry again
Steve Tag: Save IIS Tag: 332907
Add a Code
Hello
I want to add a code (ex: banner) all webpages in my server. Can I do this with IIS 5 automaticly
Thanks
Arda Tag: Save IIS Tag: 332906
Headers issue with IIS 6.0
Synopsis: Incorrect handling of HTTP header variable by ISAPI
(IIS6.0).
Details: Passing the HTTP variables to ISAPI (IIS 6.0) and displaying
the result on Web Browser.
I am facing a particular issue with headers handling on IIS 6.0 web
server. The problem is detailed below. I am using an application that
writes some HTTP headers on to the IIS 6 web server and then printed
using the asp application on Browser.
The Combinations tried details along with their result are as follows:
S. No. Scenario (HTTP Header) Output
Name Value
1 ABC ABC HTTP_ABC="ABC" HTTP_ABCD="ABCD"
ABCD ABCD
2 ABC ABC HTTP_ABCD="ABC" HTTP_WXYZ="WXYZ"
ABCD ABCD
WXYZ WXYZ
3 ABC ABC HTTP_ABCD="ABC" HTTP_WXY="WXY" HTTP_WXYZ="WXYZ"
ABCD ABCD
WXYZ WXYZ
WXY WXY
Note: The variable <ABC> is lost for Case 2 and 3 and ABCD is
populated using the value of variable <ABC>
If someone has already faced similar issue then Please help us with
resolving this issue. Is there some setting to be done on IIS for this
or if there is some resolution to this?
Thanks,
Gaurav Tag: Save IIS Tag: 332905
INetinfo.exe at 95%+ CPU usage!
I have Win XP Pro and I use IIS to to host websites that I am developing.
Under the "default website" (called JLL, the computer name) I have some
virtual directories called V1, V2 and V3.
So to point IE at a particular script I would type
HTTP://JLL/V1/something.htm or soem such.
This has been working fine since I installed XP several months ago
(previously I used Win98 SE with PWS for the same purpose).
All of a sudden today I found that IE seemed to just hang and I found
INETINFO.EXE taking up almost all the CPU. This happens all the time now.
I have shut down and restarted, even re-installed IIS. I can narrow it down
to this now.
I can start a very simple HTML script in IE with
HTTP://JLL/V1/simplescript.htm. But when I try to go to another URL, or even
refresh the first script I get the problem.
Can anyone please help??
Thanks
John L Tag: Save IIS Tag: 332902
CDO for W2K, LogonSMTP & Multiple SMTP Servers on the same PC
Hello
I have three (IIS) SMTP Servers set-up on my server, all listening on
different IP addresses.
One of them is configured to receive incoming mail. This is working fine
and messages are appearing in the drop folder within it's mail root.
I wish to "login" using the CDO.Session object with LogonSMTP and work with
these messages, but I don't know how to specify which server, (i.e. which
drop folder), that I want to connect to.
For example:
Default SMTP Server -> All Unassigned
Mailshot SMTP Server -> 10.1.1.2
Another SMTP Server -> 10.1.1.3
How do I say with LogonSMTP that I wish to 'connect' to "Mailshot SMTP
Server"?
The documentation states:
"When CDO for NTS is running with IIS, the Inbox is a common folder
shared by all recipients and applications, and containing all undeleted
messages received by Microsoft® Internet Information Server (IIS). However,
your application can access only those messages destined for the mailbox you
bind to in the LogonSMTP call."
Which is fine, but as we all know, IIS can have multiple instances of SMTP
Servers, each with their own drop directory. How does one specify which one
they wish to connect to. I am looking for something like this:
Dim objSession
Set objSession = CreateObject("CDONTS.Session")
objSession.LogonSMTP "David", "david@adomain.com", 10.1.1.3
Dim objInbox
Set objInbox = objSession.Inbox
See the third parameter saying which server I want.
Any ideas would be welcomed.
Regards
David M
P.S. I know I can specify the drop directory to work with using something
like this:
Set objDropDir = Server.CreateObject("CDO.DropDirectory")
Set objMessages = objDropDir.GetMessages("c:\inetpub\anothermailroot\drop")
But if I am not mistaken I then have to go through all the messages and do
some nasty substring functions to work out who the email recipient is. Not
as nice as 'Logging' on and having all the right messages prepared for you. Tag: Save IIS Tag: 332899
IIS Application Memory Usage
Hi,
We have over 50 web sites on IIS 5.0 configured to run in IIS-Out-Of-Process
Pooled Application so there is one process dllhost.exe for all applications.
How can you trace memory usage (physical and virtual) of each web
application at specific time.
Task Manager shows only total amount of memory used by all web applications
(DLLHOST.EXE ).
Piotr B. Tag: Save IIS Tag: 332894
Redirection of the serverA to server B (Naming)
I wonder if i redirect the page from A server to B, will the root name (e.g. in server A is "\\IntranetA" is still maintain in server B).or it will use it own (server B = "\\IntranetB")?
if I did the configuration in the "Home Directory" in IIS.
Someone please acknowledge me. Tag: Save IIS Tag: 332875
Quick query Win XP pro & IIS
Hi
Am I correct in thinking IIS in XP pro will only allow 1 website bound to
1or more IPs?
I cant have say 3 websites with separate IPs.
I know with the server versions its a different story I am asuming XP Pro
will only allow 1
cheers
Scott Tag: Save IIS Tag: 332866
Win2000: Cant get Internet Explorer to show secure webpages
Well I am having this problem with about 3 computers at the moment. All three computers have the latest IE on them and they are all running Windows 2000. When I try to go to login to a secure website I will just get a "This page can not be displayed" screen. I have been working on computers for a very long time and seem to know quiet a bit about them but this I just can't figure out. Please let me know if there is anything that I can do to fix this as it is creating numerous problems. Thanks!!
-haryy Tag: Save IIS Tag: 332865
Redirect to other PC
My situation is like this. Currently i am using A computer as my main intranet site. However, now i am shifiting the intranet to a new server. But i would like to maintain the same name as i connect to the intranet (e.g. i used to connect to my intranet using "Intranet". but i still want to use the same name when i shift to the new server). I have search for help and there is a solution where under the home directory, i can just redirect to the other URL. However the command is not available for me and i log on as Administrator. Could anyone help me to solve this problem? Tag: Save IIS Tag: 332862
How much memory OWA need? (X-post with exchange newsgroup - sorry)
Exchange 2003 on Window Server 2003 (and therefore, IIS 6)
The inetinfo.exe process consumes over 150MB of memory, even when only one
user has accessed the outlook web access (that is the only web application
configured on this server - it is totally dedicated to Exchange).
I tried to configure the Application pools to limit the RAM to 50MB, but as
soon as I browse an Outlook Web Access page, the memory for inetinfo.exe
jumps back up to over 100MB.
Is there no way to limit the amount of RAM it takes up?
- Dave Tag: Save IIS Tag: 332858
Security Setting of ftproot directory
We are downloading antivirus signature file from web to
FTP Server. When users login, clients will automatically
download the updated signature file from the FTP Server.
However, we would like to find out the best way of
downloading the signature file from web to the ftproot
directory.
Should we just map to the E$ and copy the signature file
across OR create a share for the ftproot directory. If
share is preferred, what security setting should we give
to administrators ? Just write and read ?
Thanks Tag: Save IIS Tag: 332849
Tool for Content Analysis
Hi,
I know that Site Server 3.0 has a tool called Content Analyzer. This is a
neat tool allowing one to analyze a website find broken links etc.
Site Server 3.0 does not seem to work on XP. Is there a similar tool that
does work?
Thanks,
Arsen Tag: Save IIS Tag: 332845
IIS & Virtual Directory
I've followed all the directions (by the book) for
setting up a virtual site at least 4 times and I'm not
getting any results. Page cannot be displayed. Are they
any known facts, commom mistakes or tips about IIS 5 that
I'm overloooking? Please help!! Tag: Save IIS Tag: 332841
ExchWeb folder
I made some changes on the properties of the ExchWeb
folder and subfolders. After that I have not been able to
login to the exchange from outside. I don't not what I
changed and how to undo thoses changes. Does any one know
the defaults for the Default Web Site or for the ExchWeb
folder and subfolder? It's anyway to reinstall these
folder with losing any email or file? I alway got the
HTTP 500 error, I tried everything single article related
to this on the web with no zero result.
Thanks for your help Tag: Save IIS Tag: 332840
keeping default website stopped
In IIS on a windows 2000 server is it possible to stop the default website, and keep that stopped status even after a reboot? We have another site using the same ip and port and after each reboot we have to go in and stop the default site in order to get the other site running. Do I have to live with the default site always starting and just assign a different ip address or port number to it? Can I just delete the default site? Is there a registry entry that specifies which site loads first? Tag: Save IIS Tag: 332838
int exp error
When I try to load Microsoft Int. Explorer, I get this
message: HTTP 500 Internal Server Error. Can anyone
please help me??????? Tag: Save IIS Tag: 332836
Session Timeout
I am having the same problem on 3 different machines. 2 are running IIS 5.1 (XP Pro workstation) and 1 is running IIS 5.0 (2000 Server)
I have changed the Session Timeout value several times using the MMC.
On the first XP machine, I have the timeout value set at 1 minute. Using the Performance monitor, I determined it is still timing out at the previous value of 120 minutes
On the second XP machine, I have the timeout value set at 20 minutes, but it is timing out at 1 minute. Which was a previous setting. Again I have used the Performance monitor to verfiy this
Finally, on the 2000 Server, I have the session timeout value set at 60 minutes. But it is timing out at 720 minutes which was a previous setting. Verified with Performance monitor
Any suggestions
FYI: this is NOT an asp.net application. Tag: Save IIS Tag: 332835
Re: The data area passed to a system call is too small
Hi All,
I am trying to pass a url string that is long - about 300
values - and I am getting - The data area passed to a
system call is too small - error message.
Is there anything that I can do about this ?
is there a way to specify the max URL string to accept or
is it the 2048 bytes limit ?
TIA
Dummy Tag: Save IIS Tag: 332829
Webdav and file created date
When using webdav, when you copy a file upto the IIS server should it
retain its original created/modified date ?
When i try this under IIS5 & 6 the uploaded file gets a created &
modified date of the current date/time. This makes it rather difficult
to use something like robocopy to mirror the web site (without
completely uploading all content to the IIS server each time).
Cheers,
Mike. Tag: Save IIS Tag: 332827
How can I leave the url unchanged?
I want to be able to leave the url path unchanged
even when users goto various pages within my web site.
For eg. If I start my web with
http://mywebsite.com/Access
It should stay there instead of displaying
pathname of other pages like http://testpage/report.
Thanks for your help!
-Tina Tag: Save IIS Tag: 332824
IIS 5.0 and https:
I have a site that is SSL secured with a self signed
cert. This is a test system that is only available to
internal network users at this point. The problem I am
having is this: If a user opens a new IE session and
tries to attach to my https: site, the page does not
display. If they connect to the same URL via http:, the
page displays properly. Similarly, if they attach to the
http: site and let the page display, then simply put
an 's' after http, the https: site will display. I can't
figure out why this is happening. I'm running IIS 5.0 on
Win2k, SP4. Thanks for any help. Tag: Save IIS Tag: 332823
Pre-Mapped Drives for Users Logging Into W2K3 Server
I'm looking for suggestions on how people pre-map drives on a W2K3 Server.
When a new profile is made I want certain drives ALREADY mapped.
Example:
Joe.User logs in for the first time, he ALREADY has the X: drive mapped to
\\server\share
Thanks in advance. Tag: Save IIS Tag: 332822
Need help with IIS and CR reports - USer interface
I would like to be able to setup a simple application on IIS 6.0 to allow
authorized users to select and run Crystal reports by clicking on the links.
Most of these CR reports were created using CR 8.5 and using ODBC DSN's
(setup in IIS server) to connect to various databases. I would like to be
able to allow users to provide parameter values at runtime.
Any suggestion is greatly appreciated.
Bill Tag: Save IIS Tag: 332817
Is it possible to save and then export my IIS
configuration on Windows 2000 ? If so please tell me how.