IIS 5.0 multipart fails with jpeg
We have a w2k server running IIS 5.
Using multipart uploads has been never a problem.
Now, if we post a multipart from with a file input field upload fails.
This happens randomly with big and small jpg files.
Uploading a different file format like .exe works fine.
Tracking TCP traffic we realized a HTTP Error 400 "Bad Request" when
upload jpegs.
This is very strange because sometimes jpgs are uploaded without any
error but now more often we getting those error.
I looks like the IIS assuming the upload is finished but it isn't!
Therefore IIS send "Bad Request" back to the browser what is causing
the error.
Any ideas want went wrong? Tag: Microsoft Script Debuggers opens without an error inside Tag: 379861
Unique IP for one website - IIS 5
Following this thread:
http://groups.google.com/group/microsoft.public.inetserver.iis/browse_thread/thread/f1ac75810d4d341b/6b3f904176aba933?lnk=st&q=question+on+host+header&rnum=1#6b3f904176aba933
I would ask how can I assign another IP to a website to catch
*.mydomain.com.
Now all websites point to 10.0.0.2 and, according Ken advice, I
configured newtork-card to add another IP: 10.0.0.3.
How should I set up web site with that IP (properly natted from internet
to lan zone) ?
I think:
Properties --> Website --> Advanced -->
Ip address TCP port Host
10.0.0.3 80 <empty>
But it doesn't work!
If I ping from command prompt:
ping test.mydomain.com DNS resolve correctly IP address.
I don't know where else modify settings...
And what about call website only from IP address?
217.xxx.xxx.xxx is natted --> 10.0.0.3 and when I browse internet this
way: http://217.xxx.xxx.xxx I can see website, I would avoid this.
Any help much much appreciated.
Best regards.
--
fabri
Sei un italiano medio, di oltre trent'anni se:
Sai che il codice SYS64738 serviva per riavviare il Commodore 64 ed hai
cambiato almeno una mezza dozzina di joystick Quickshot I giocando a
Summer Games.
MKDS nick & friend Code:
Joker® - 055895 043343 Tag: Microsoft Script Debuggers opens without an error inside Tag: 379857
IIS 6.0 + apache 2.2 on same machine?
Is it possible to run both - iis and apache - on the same machine?
IIS is runing on the machine (172.31.63.54:80). I installed apache 2.2, but
it will not start. In the httpd.conf I entered for Listen 172.31.63.55:80.
Error: make_sock: couldn't bind to 172.31.63.55:80
Any idea? Tag: Microsoft Script Debuggers opens without an error inside Tag: 379852
IIS in windows 2003 is not able to process ASP.NET application
WINDOWS 2003 has DOT net framework 1.1 installed.But it seems ASP.NET
application is not supported in the IIS coming with Windows Server 2003.
Even I tried with installing VS .NET 2003,but the problem still is there.
If I start ASP.NET application then it complains that the specified web
server is not running ASP.NET 1.1.Any help in this regard is highly
appreciated. Tag: Microsoft Script Debuggers opens without an error inside Tag: 379849
Object invoked disconnected from client Error
Running into a problem with Windows Server 2003 and IIS6. We have an ASP app
which does late binding to a DLL written in VB6. This VB6 dll has a form
with a 3rd party OCX on it. Under Windwos 2000 and IIS 5 we have no
problems. But when we run it under Windows Server 2003 with IIS6 we
constantly get "Object invoked has disconnected from the client" error. I
can't figure out what the problem is. I've created an executable which has a
reference to this DLL and everything runs fine so I know it's not a problem
with the DLL or OCX.
Does anyone have any ideas of what to look for?
Joe Pacelli Tag: Microsoft Script Debuggers opens without an error inside Tag: 379843
DebugDiag can not generate dump file
Hi,
Our asp.net web site is experiencing multiple "service unavailable"
error every day. I have installed the DebugDiag try to capture the dump
file. However, I was not able to generate the dump every time the crash
happened.
I'm using Windows 2003 Server SP1. I connect to the server using remote
desktop. I started the iis diagnostic tool using windows scheduler with
administrator identity. The "use service mode to overcome terminal
server limitation" flag was checked.
What am I missing here?
Any comment is appreciated.
Thanks,
Michael
Here is the system even log and the log file generated by iis
diagnostics tool:
Event Type: Warning
Event Source: W3SVC
Event Category: None
Event ID: 1009
Date: 3/14/2006
Time: 11:09:38 AM
User: N/A
Computer: PRODUCTION-01
Description:
A process serving application pool 'DefaultAppPool' terminated
unexpectedly. The process id was '1920'. The process exit code was
'0x800703e9'.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: W3SVC
Event Category: None
Event ID: 1011
Date: 3/14/2006
Time: 11:09:35 AM
User: N/A
Computer: PRODUCTION-01
Description:
A process serving application pool 'DefaultAppPool' suffered a fatal
communication error with the World Wide Web Publishing Service. The
process id was '1800'. The data field contains the error number.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6d 00 07 80 m..=80
w3wp__PID__1920__Date__03_14_2006__Time_11_09_37AM__139__Log.txt
Loading control script C:\Program Files\IIS
Resources\DebugDiag\Scripts\CrashRule_WebAppPool_DefaultAppPool.vbs
DumpPath set to E:\iGen\IIS Diagnostics Toolkit\log\Crash rule for IIS
6 web application pool - DefaultAppPool
[3/14/2006 11:09:37 AM] Process created. BaseModule -
c:\windows\system32\inetsrv\w3wp.exe BaseThread System ID - 3728
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3204
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 1940
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3876
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 2556
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 1644
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3168
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 804
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3300
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 1948
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3764
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3020
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 1860
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3508
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 1600
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 956
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 4044
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 2504
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3252
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 912
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 2808
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3100
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 3572
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\ntdll.dll loaded at
0x7c800000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\kernel32.dll loaded at
0x77e40000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\msvcrt.dll loaded at
0x77ba0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\ADVAPI32.dll loaded at
0x77f50000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\RPCRT4.dll loaded at
0x77c50000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\USER32.dll loaded at
0x77380000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\GDI32.dll loaded at
0x77c00000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\ole32.dll loaded at
0x77670000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\IISUTIL.dll loaded
at 0x64700000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\CRYPT32.dll loaded at
0x761b0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\MSASN1.dll loaded at
0x76190000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\xpsp2res.dll loaded at
0x10000000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\w3core.dll loaded
at 0x5a390000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\IISMAP.dll loaded at
0x5a420000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\IisRTL.DLL loaded at
0x647b0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\WS2_32.dll loaded at
0x71c00000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\WS2HELP.dll loaded at
0x71bf0000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\LONSINT.dll loaded
at 0x62da0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\Secur32.dll loaded at
0x76f50000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\NETAPI32.dll loaded at
0x71c40000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\OLEAUT32.dll loaded at
0x77d00000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\strmfilt.dll loaded at
0x5b640000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\HTTPAPI.dll loaded at
0x67150000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\SHLWAPI.dll loaded at
0x77da0000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\W3CACHE.dll loaded
at 0x5a400000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\W3TP.dll loaded at
0x5a300000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\W3COMLOG.dll loaded
at 0x5a3f0000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\w3dt.dll loaded at
0x5a360000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\wamreg.DLL loaded
at 0x60ba0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\WSOCK32.dll loaded at
0x71bb0000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\iisres.dll loaded
at 0x6d0f0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\CLBCatQ.DLL loaded at
0x777b0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\COMRes.dll loaded at
0x77010000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\VERSION.dll loaded at
0x77b90000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\ADMWPROX.DLL loaded at
0x608f0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\rsaenh.dll loaded at
0x68000000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\PSAPI.DLL loaded at
0x76b70000
[3/14/2006 11:09:37 AM]
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_filter.dll loaded
at 0x79e50000
[3/14/2006 11:09:37 AM]
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\MSVCR71.dll loaded at
0x7c340000
[3/14/2006 11:09:37 AM] c:\windows\system32\inetsrv\w3isapi.dll loaded
at 0x5a320000
[3/14/2006 11:09:37 AM] C:\WINDOWS\System32\mswsock.dll loaded at
0x71b20000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\DNSAPI.dll loaded at
0x76ed0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\System32\winrnr.dll loaded at
0x76f70000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\WLDAP32.dll loaded at
0x76f10000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\rasadhlp.dll loaded at
0x76f80000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\inetsrv\gzip.dll loaded at
0x685b0000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\mpr.dll loaded at
0x71bd0000
[3/14/2006 11:09:37 AM]
\\?\C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll
loaded at 0x79e60000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\USERENV.dll loaded at
0x76920000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\mscoree.dll loaded at
0x79170000
[3/14/2006 11:09:37 AM]
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\mscorsvr.dll loaded at
0x791b0000
[3/14/2006 11:09:37 AM]
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\fusion.dll loaded at
0x79040000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\SHELL32.dll loaded at
0x7c8d0000
[3/14/2006 11:09:37 AM]
C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.=
0=2E3790.1830_x-ww_7AE38CCF\comctl32.dll
loaded at 0x77420000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\mscorlib.dll loaded at
0x79780000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\nativeimages1_v1.1.4322\mscorlib\1.0.5000.0__b77a5c5619=
34e089_d708434c\mscorlib.dll
loaded at 0x79990000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.web\1.0.5000.0__b03f5f7f11d50a3a\system.web.=
dll
loaded at 0x7a090000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system\1.0.5000.0__b77a5c561934e089\system.dll
loaded at 0x7b0a0000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.drawing\1.0.5000.0__b03f5f7f11d50a3a\system.=
drawing.dll
loaded at 0x7b490000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.xml\1.0.5000.0__b77a5c561934e089\system.xml.=
dll
loaded at 0x7bc10000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.data\1.0.5000.0__b77a5c561934e089\system.dat=
a=2Edll
loaded at 0x7a6e0000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.enterpriseservices\1.0.5000.0__b03f5f7f11d50=
a3a\system.enterpriseservices.dll
loaded at 0x79000000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.web.regularexpressions\1.0.5000.0__b03f5f7f1=
1d50a3a\system.web.regularexpressions.dll
loaded at 0x7a2a0000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\microsoft.visualc\7.0.5000.0__b03f5f7f11d50a3a\micr=
osoft.visualc.dll
loaded at 0x10a70000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.directoryservices\1.0.5000.0__b03f5f7f11d50a=
3a\system.directoryservices.dll
loaded at 0x7a000000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.runtime.remoting\1.0.5000.0__b77a5c561934e08=
9\system.runtime.remoting.dll
loaded at 0x79640000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.runtime.serialization.formatters.soap\1.0.50=
00.0__b03f5f7f11d50a3a\system.runtime.serialization.formatters.soap.dll
loaded at 0x79550000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\cscompmgd\7.0.5000.0__b03f5f7f11d50a3a\cscompmgd.dll
loaded at 0x53760000
[3/14/2006 11:09:37 AM]
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\MSCORJIT.DLL loaded at
0x79430000
[3/14/2006 11:09:37 AM]
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\mscorsn.dll loaded at
0x79510000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\n18y8dkh.dll loaded at 0x02050000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\bf361973\8eec83ef_c542c601\igen.d=
ll
loaded at 0x11000000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\671d6d6d\aa3a92ef_c542c601\webpag=
esecurity.dll
loaded at 0x02090000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\eefed4b2\50d88fef_c542c601\nunit.=
framework.dll
loaded at 0x0c0d0000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\851d49d3\f6758def_c542c601\micros=
oft.practices.enterpriselibrary.configuration.dll
loaded at 0x0c0e0000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\ccd16837\aa3a92ef_c542c601\urlrew=
riter.dll
loaded at 0x0c120000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.web.mobile\1.0.5000.0__b03f5f7f11d50a3a\syst=
em.web.mobile.dll
loaded at 0x7a1d0000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.design\1.0.5000.0__b03f5f7f11d50a3a\system.d=
esign.dll
loaded at 0x7ab90000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.windows.forms\1.0.5000.0__b77a5c561934e089\s=
ystem.windows.forms.dll
loaded at 0x7b610000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\accessibility\1.0.5000.0__b03f5f7f11d50a3a\accessib=
ility.dll
loaded at 0x79e40000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\668847c7\9c138bef_c542c601\micros=
oft.practices.enterpriselibrary.common.dll
loaded at 0x0c130000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.web.services\1.0.5000.0__b03f5f7f11d50a3a\sy=
stem.web.services.dll
loaded at 0x7a2c0000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\c7fa81a7\1eb44aef_c542c601\ajax.d=
ll
loaded at 0x0c160000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\b21d6d17\eec65def_c542c601\dotnet=
charting.dll
loaded at 0x0c180000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\11b1cb60\42b188ef_c542c601\micros=
oft.practices.enterpriselibrary.caching.dll
loaded at 0x0c2d0000
[3/14/2006 11:09:37 AM]
c:\windows\microsoft.net\framework\v1.1.4322\temporary asp.net
files\root\e94c2b75\1e397922\assembly\dl2\aa62e44a\e84e86ef_c542c601\intero=
p=2Ejmail.dll
loaded at 0x0c2f0000
[3/14/2006 11:09:37 AM]
c:\windows\assembly\gac\system.enterpriseservices\1.0.5000.0__b03f5f7f11d50=
a3a\system.enterpriseservices.thunk.dll
loaded at 0x79620000
[3/14/2006 11:09:37 AM]
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\diasymreader.dll loaded at
0x51a70000
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 2364
[3/14/2006 11:09:37 AM] Initializing control script
[3/14/2006 11:09:37 AM] Clearing any existing breakpoints
[3/14/2006 11:09:37 AM]
[3/14/2006 11:09:37 AM] Current Breakpoint List(BL)
[3/14/2006 11:09:37 AM] Thread exited. Exiting thread system id - 2364.
Exit code - 0x00000000
[3/14/2006 11:09:37 AM] Thread created. New thread system id - 648
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\Com\comadmin.dll loaded at
0x6e060000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\MfcSubs.dll loaded at
0x61e50000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\dbnetlib.dll loaded at
0x6d560000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\security.dll loaded at
0x71f60000
[3/14/2006 11:09:37 AM] C:\WINDOWS\system32\DBmsLPCn.dll loaded at
0x74cd0000
[3/14/2006 11:09:38 AM] First chance exception - 0xc00000fd caused by
thread with system id 4044
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3728.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3168.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 804.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 1644.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 1600.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 912.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3252.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 1860.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 2808.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3572.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3100.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3764.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3300.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 2556.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 1940.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 648.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3508.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3876.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3204.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 2504.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 1948.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 956.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Thread exited. Exiting thread system id - 3020.
Exit code - 0x800703e9
[3/14/2006 11:09:38 AM] Process exited. Exit code - 0x800703e9 Tag: Microsoft Script Debuggers opens without an error inside Tag: 379840
IIS 6.0 FTP traffic quota
Hi,
I want to assign to each of my FTP user a traffic quota/month and when
this limit is exceded to take an action. Is this possible with IIS 6.0?
and if yes from where should I start to study the subject?
Thank you,
Sandy Tag: Microsoft Script Debuggers opens without an error inside Tag: 379831
Dot Net 2.0 IIS Recycle
I installed the 2.0 framework on my W2K3 servers. We have noticed that when
we use the new ASP.Net tab in the MMC to set the version for a given site it
recycles the entire web service.
Event Type: Information
Event Source: ASP.NET 2.0.50727.0
Event Category: None
Event ID: 1023
Date: 3/14/2006
Time: 3:53:32 PM
User: N/A
Computer: BIGBLUE
Description:
Restarting W3SVC
On a production server with lots of web sites, this is not desireable as the
entire system becomes unusable. In my opinion it should only recycle the
affected application pool and not the entire W3SVC service. Has anyone else
experienced this? Any workaround? Should I report this as a bug to PSS?
Thanks. Tag: Microsoft Script Debuggers opens without an error inside Tag: 379825
How do I know what version of IIS is on my server?
I realize this sounds like a silly question, but I can't find anywhere that
tells me what version of IIS I have on my Server2000 box. Yes, I know we
should rebuild our webserver with Server2003/IIS6....but I have to wait.
Poking around in the IIS properties, I have one dialog box that says IIS 3
on the header bar...but I though server 2000 shipped with IIS 5?
Is there a magic spot I can find this out?
Thanks Tag: Microsoft Script Debuggers opens without an error inside Tag: 379810
Windows server 2003 Web Edition - II6
We have had this problem with our IIS web servers for quite some time
we can't seem to nail down.
IE is caching temp files in C:\WINDOWS\Temp\Temporary Internet
Files\Content.IE5 and then a subfolder of the cache. It's caching
bitmaps of a snap shot when a customer surfs to that page and a call is
made.
We can't locate the setting to turn this cashing off for Windows and
the problem is we're running out of space often because it can cache
500 MB's in a day.
If the problem were in IE we'd have no problem, we could just turn
the cache off.
Thoughts? Tag: Microsoft Script Debuggers opens without an error inside Tag: 379806
HTTP 404 - File or Directory not found error message
I have a Windows 2003 Server w/ IIS 6 running. I have a new website, but I
cannot get the index.html page to display. Instead, I get the HTTP 404 error
message. I enabled ASP and ASP.Net but that does not work. Is there anything
else that I can try?
Any help is much appreciated. Tag: Microsoft Script Debuggers opens without an error inside Tag: 379804
Using Windows Login for web folder
Hello,
I'm having difficulty with setting a single folder to use Windows
Authentication (maybe that's not correct terminology, but windows user name
and password login) . It seems I get all or nothing and no authentication
window using IIS5 (I believe it is). This is an administration folder that
I'm trying to secure and I don't really want to do a bunch of ASP.net work
to do this. Is there a tutorial somewhere or can someone give me some
pointers on what I need to use Windows Authentication for this folder?
Thanks! Tag: Microsoft Script Debuggers opens without an error inside Tag: 379787
iis 6 Anonymous Authentication returns SQL Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
I have a iis web server and a remote SQl server. I set the web server to
use anonymous access of a domain account. The web server can access the SQL
server fine, except sometimes in certain actions like clicking on some aspx
link or button, it will result in SQL Login failed for user 'NT
AUTHORITY\ANONYMOUS LOGON'. Usually this happens when the page has loaded
and sit for sometime, then click on the link or button.
Have any one seen it before?
Any help will be appreciated. Tag: Microsoft Script Debuggers opens without an error inside Tag: 379786
IIS 6 app pool memory usage questions
1. is it normal for an app pool to use a lot more virtual memory than RAM,
say 15 times as much?
2. what can I expect the overhead per application pool to be? reason I as is
I am wondering how many app pools I can have on a server.
3. where can I find benchmarks on how much memory an app should use?
I am looking to break up application into their own app pools to isolate
them from each other, but in doing so I noticed that each app pool that uses
the 1.1 framework is consuming over 400 megs in virtual memory
apps using the 2.0 framework use up over 500 megs of virtual memory, which
is higher than the default for app pool recycling based on memory usage.
I am trying to find out if that is normal, but haven't had much luck yet.
thanks Tag: Microsoft Script Debuggers opens without an error inside Tag: 379785
Unusual Content-Disposition issue
Hi,
I'm not sure if this is an IIS issue or a problem with IE, but here goes.
I'm developing an online File Manager program in .Net, one part of the site
allows you to view all the files, and download them to the local PC, to do
this I'm using the Content-Disposition=attachment header to force IE to give
the save dialogue rather than open the file directly in IE. To do this I
have a hidden IFRAM, that get it's location update to
GetFile.aspx?id=--------- this sets the correct headers, and sends the file
down in the stream.
This works fine on WinXP, but when I try this on Windows 2003 (SP1) with
IE6.0.3970.1830(SP1) it still loads the file inside IE, the strange thing
is, if I go directly to the GetFile.aspx page in IE, I get the Save dialogue
as expected, so it seems as it's an issue doing this with IFrames.
*confused*
The headers sent by IIS are:
HTTP/1.1 200 OK
Server: Microsoft-IIS/5.1
Date: Tue, 14 Mar 2006 16:06:44 GMT
X-Powered-By: ASP.NET
X-AspNet-Version: 1.1.4322
Content-Disposition: attachment; filename=DSCN1431.JPG;
Cache-Control: private
Content-Type: image/jpeg
Content-Length: 380282
The same thing happens when using IIS6
Any Ideas? Tag: Microsoft Script Debuggers opens without an error inside Tag: 379783
IIS won't look where I'm pointing. Is it dumb? Or is it just me?
I'm an IIS newbie so please bear with me...
We are migrating a currently working, .NET web app to a new server (both
2003 Svr). One of the application pages uses an IFrame to host legacy asp
pages. The IFrame points to a folder in inetpub. On the old server, inetpub
resided on the c: drive and the legacy folder was not a virtual directory.
On the new system, we have set up an inetpub on d: and the folder resides
there. Everything works fine except that the IFrame absolutely will not see
files in that folder. I have tried it as a virtual directory. I have even
tried moving the folder to inetpub on the c: drive; but to no avail.
I've checked everything from odbc connections to sql aliases. Can anyone
suggest things for me to check/look into?
--
Thanks,
CGW Tag: Microsoft Script Debuggers opens without an error inside Tag: 379781
Default max-age setting in IIS
Does IIS have a default setting for the Cache-Control header's max-age
parameters?
Our IIS 6 server is sending:
Cache-Control: max-age=172800
on all JavaScript files requested (48 hours caching).
We would like to change this setting to 6 hours but the application
being hosted has 100's of javascript files all over the place and using
the MMC to do this (Content Headers) is not feasible.
In the metabase.xml I found 1 reference to "max-age" but it was
pertaining to http compression which we do use. However the value is
another "max-age=86400".
I am hoping for a registry entry which I can edit with regedit.
Jack
PS: Is there any way to define cache settings per mime type like in
Apache? Tag: Microsoft Script Debuggers opens without an error inside Tag: 379779
Web Garden with 2 Worker Process
I am facing a peculiar problem. I have two pages. The first is Index Page.
The End User keys some information and then searches. Then the results page
is displayed. If I set WebGarden to 1 worker process everything works fine
but when I set > 1 then atleast one session does not retrieve any results
which was working fine with web garden as 1. I am using Session to transfer
info. Pls let me know how to address this issue. Tag: Microsoft Script Debuggers opens without an error inside Tag: 379778
common folder outside of the web folder
I have several websites that need to access a common folder. Suggestions
would be appreciated.
Thanks
Harry Tag: Microsoft Script Debuggers opens without an error inside Tag: 379775
More than just IIS Log Information ??
Hi,
I dont know if this is the right forum for this question but I hope
someone is able to answer this for me. I know a lot of information can
be retrieved using IIS Log files. But there seems to be something that
my boss wants me to do. Find a way to implant a cookie on user and get
more information than just the information that is retrieved by those
log files. He says one can get more information like browser resolution
and stuff(which he didnt explain what exactly it is). I was wondering
if there any way of doing this and some information like that?
Thanks in advance
Subrato Tag: Microsoft Script Debuggers opens without an error inside Tag: 379774
MSsharepointapppool Defaults
in a TechNet article: Preparing to Extend Web Sites,
at:
http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/98fe6306-af21-41ef-9a21-32263f7636c6.mspx
it states: Do not use, or make changes to mssharepointapppool. . .
I see many applications listed under this app pool on my Windows 2003 sp1
web server. Does anyone know if there is a way I can find out if we added
these inadvertantly or if an IIS application (such as FPSE) added them?
thanks, Tag: Microsoft Script Debuggers opens without an error inside Tag: 379771
Constantly Flushing DNS Cache
After doing all the latest Windows Updates as of 3/9/2006, I am constantly
having to to a IPCONFIG /REGISTERDNS on my webserver multiple times a day. I
have checked everything I can think of to correct the issue. What would
cause this to happen. Nothing has changed for ISPs DNS record, checked that.
The machine will not even respond to http://IP ADDRESS when tried via a web
browser. Once I do the command above it work fine from anywhere between 15 -
60 minutes. Any help would be apprecitated. Windows 2003 Server
Thank
Ronald Tag: Microsoft Script Debuggers opens without an error inside Tag: 379770
Path 'POST' is forbidden.
I am trying to test a simple Web Service and when I invoke a Web Method that
returns a Dataset I get:
Path 'POST' is forbidden.
Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information about
the error and where it originated in the code.
Exception Details: System.Web.HttpException: Path 'POST' is forbidden.
Source Error:
An unhandled exception was generated during the execution of the current web
request. Information regarding the origin and location of the exception can
be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Path 'POST' is forbidden.]
System.Web.HttpMethodNotAllowedHandler.ProcessRequest(HttpContext
context) +79
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +179
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean&
completedSynchronously) +87
Any ideas please? Tag: Microsoft Script Debuggers opens without an error inside Tag: 379769
Static & Dynamic Content
Hi all
Just a quick query, are there any preferred standards when you have a web-site
that contains a mixture of HTML and say, ASP & ASP.Net apps?
We currently have our applications embedded in our static content virual
directories, I think this is a bad idea and would favour seperating our dynamic
content from our static content (into seperate sites) as using our existing
method is proving to be a maintenance nightmare.
Any thoughts/suggestions on this?
Thanks
Kev Tag: Microsoft Script Debuggers opens without an error inside Tag: 379768
Windows Server 2003 Standard Edition x64: no frontpage server extensions available?
i can't find any hint that it exists on the x64 system. for the x86(=32 bit)
system i found it in the add/remove programs details of the iis but this is
missing on the x64 system.
also there is no item in the iis manager console for fpse like on the x86
system.
then i found that link
http://www.microsoft.com/downloads/details.aspx?familyid=BAC7ABF9-3C78-44BB-8A72-6F8ED2AA0E8E&displaylang=en
but it seems to work only with winxp x64.
now i wonder if there are no fpse for iis on win2k3 x64.
can anybody help? Tag: Microsoft Script Debuggers opens without an error inside Tag: 379762
CGI Application fails if HTTP-Get includes Data in Cookie Header
Hi Newsgroup
I recently moved my website from IIS5.0 to 6.0. So far i've got it up and
running fine. Exept for one thing:
I have a CGI-Application that sends Cookies with encrypted fields (Special
characters) to the client.
If this cookie is not present (deleted), Everything works fine. The cookie
is saved locally then.
If you navigate through the site or start a new session (when the cookie
already is present) the webserver answers with a http "400 - Bad Request".
It seems to be the behaviour as described in this article:
http://support.microsoft.com/kb/824446/en-us
I analysed this with a network sniffer tool. If it works there is "nearly"
nothing in the http-header-cookie field (as there is no cookie). If it fails
there are special characters in this field.
Unfortunately the patch from the article is already installed, as it came
with SP1 for Win2003. The workaround has no effect.
As the workaround deals with regional options, it may be important to know,
that the OS is an English Windows server with a german User interface.
Any ideas?
Thanks for your support!
Götz Tag: Microsoft Script Debuggers opens without an error inside Tag: 379757
Submit button not working after moving from Windows Server 2000 to 2003
I'm running a web application with ASP.NET on a Window Server 2000
machine.
Recently we move the web application to Windows Server 2003.
Once we move it, the rest of the features is working fine except the
submit button.
Is there any security settings or configuration which I need to set in
order for it to run?
Peter CCH Tag: Microsoft Script Debuggers opens without an error inside Tag: 379751
adsi create virtual directory in vs2005
Hi all:
I am having abit of problem and hope you can point out what is my
issue. I am trying to create virtual directory programmaticall on my
localhost websever by using visual studio 2005, I have create a simple
aspx page with some of your article reference. I have added reference
such as System.DirectoryServices, Active DS IIS Namespace Provider,
Active DS Type Library visual studio 2005. but when I start to run it,
it returns an error saying"The value provided for adsObject does not
implement IADs." I am not sure what I did wrong, Could you help me out?
thanks in advance .
by the way, I am using framework 2.0
below is my complete code with error next to the code
<%@ Page Language="VB" Debug="true" %>
<script language="vbscript" runat="server">
Sub Page_Load(ByVal Source As Object, ByVal E As EventArgs)
'Create IIS virtual directory
Dim WebSite = "Localhost"
Dim vd_name = "emint_websites"
Dim AppName = "test"
Dim Path = "C:\Inetpub\wwwroot\websites\test"
Dim IISSchema As New
System.DirectoryServices.DirectoryEntry("IIS://" & WebSite &
"/Schema/AppIsolated") ----error "The value provided for adsObject does
not implement IADs."
Dim CanCreate As Boolean = Not
IISSchema.Properties("Syntax").Value.ToString.ToUpper() = "BOOLEAN"
IISSchema.Dispose()
If CanCreate Then
Dim PathCreated As Boolean
Try
Dim IISAdmin As New
System.DirectoryServices.DirectoryEntry("IIS://" & WebSite &
"/W3SVC/1/Root/" & vd_name & "")
'make sure folder exists
If Not System.IO.Directory.Exists(Path) Then
System.IO.Directory.CreateDirectory(Path)
PathCreated = True
End If
'If the virtual directory already exists then delete it
For Each VD As System.DirectoryServices.DirectoryEntry
In IISAdmin.Children
If VD.Name = AppName Then
IISAdmin.Invoke("Delete", New String()
{VD.SchemaClassName, AppName})
IISAdmin.CommitChanges()
Exit For
End If
Next VD
'Create and setup new virtual directory
Dim VDir As System.DirectoryServices.DirectoryEntry =
IISAdmin.Children.Add(AppName, "IIsWebVirtualDir")
VDir.Properties("Path").Item(0) = Path
VDir.Properties("AppFriendlyName").Item(0) = AppName
VDir.Properties("EnableDirBrowsing").Item(0) = False
VDir.Properties("AccessRead").Item(0) = True
VDir.Properties("AccessExecute").Item(0) = True
VDir.Properties("AccessWrite").Item(0) = False
VDir.Properties("AccessScript").Item(0) = True
VDir.Properties("AuthNTLM").Item(0) = True
VDir.Properties("EnableDefaultDoc").Item(0) = True
VDir.Properties("DefaultDoc").Item(0) =
"default.htm,default.aspx,default.asp"
VDir.Properties("AspEnableParentPaths").Item(0) = True
VDir.CommitChanges()
'the following are acceptable params
'INPROC = 0
'OUTPROC = 1
'POOLED = 2
VDir.Invoke("AppCreate", 1)
Catch Ex As Exception
If PathCreated Then
System.IO.Directory.Delete(Path)
End If
Throw Ex
End Try
End If
End Sub
</script>
my web configuration file is :
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.Security, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="System.DirectoryServices, Version=2.0.0.0,
Culture=neutral,
PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
<pages>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Net.Mail"/>
<add namespace="System.Net.Mail.MailMessage"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Security.Principal"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
<add namespace="System.IO"/>
</namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly"
defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration> Tag: Microsoft Script Debuggers opens without an error inside Tag: 379737
ASP 0201 - Invalid Default Script Language
XP Pro SP2 / IIS 5.1
Oof. IIS is killing me on this one! All requests for ASP pages result
in this error, but other pages (e.g. html, aspx, etc) work fine. I've
searched extensively for a solution, and tried the following without
success:
1) Specified language in ASP page (<%@ Language="VBScript" %>)
2) Changed/Reset default script language in IIS (currently it's
"VBScript")
3) Added IUSR to Administrators group
4) Granted explicit permissions to IUSR on asp.dll, vbscript.dll and
scrrun.dll
5) Reinstalled IIS
Interestingly, when I try to install the script engine (5.6) it fails
with the error message, "Error registering the OCX
C:\Windows\system32\scrrun.dll". Likewise, a manual registration via
regsvr32 fails.
I am probably forgetting some important detail, so let me know if
you've got any questions. Any help will be much appreciated. - TIA
Jared Tag: Microsoft Script Debuggers opens without an error inside Tag: 379736
Web page redirect option
I have 2 servers. The PDC is running Windows 2003 Server Standard and the
other is running Windows 2000 Server Standard. The Windows 2000 server has
IIS and Exchange 2003 runnig on it. We would like to spread the load and
have the web page running on a 3rd server. Will I have to remove IIS on the
existing server and then reinstall it on the 3rd server? Will it
automatically find the IIS running when someone tries to get to our webpage?
Thanks for the information. Tom Tag: Microsoft Script Debuggers opens without an error inside Tag: 379735
IIS 6 - "HTTP Error 500.13 - Server error: Web server is too busy."
On any websites we have setup that share an IP address (one site is a
catch-all and the others have host headers) we're sporadically getting
the following error if we try to hit an .asp page...
"HTTP Error 500.13 - Server error: Web server is too busy."
For other sites that use the same code base but use a different IP
address, we do not get this error.
If anyone could help it would be greatly appreciated!
~Robin Tag: Microsoft Script Debuggers opens without an error inside Tag: 379728
Error Code: 80070034
* Windows server 2003 Enterprise Edition
* Print Cluster
* Alias for Cluster resides on Unix DNS server pointing to Printserver ip
address
* Trying to access a printer over the internet via http
* I can access it via cluster name internally but only via IP externally
* When i type in alias this is the error I get.
An error occurred processing your request.
Error Code: 80070034
Note: Get ADSI Printers
Thanks Tag: Microsoft Script Debuggers opens without an error inside Tag: 379725
Custom "Service Not Available" message?
Is it possible to customise the "Service Not Available" message that
IIS displays? I note that when shutting down IIS it sets this state.
I'm updating a COM control and want to say something more reassuring
that it will be available in a few seconds.
Thanks
Richard Tag: Microsoft Script Debuggers opens without an error inside Tag: 379717
IIS 6 Web Log Analysis
Does anybody know of any preferably free software for analysing IIS 6
web server logs, in particular for a web farm? Tag: Microsoft Script Debuggers opens without an error inside Tag: 379715
IIS5 backup restoring to IIS6
Is there any way to restore an backup from IIS5 to IIS6?
Our 5.0 server har crashed and I need to restore sites to a new server and I
need to know if its possible to do this from 5 to 6??
regards
Kjell Tag: Microsoft Script Debuggers opens without an error inside Tag: 379713