HTTP access for Public Folders
I continue to get the following error when I attempt to
access the Public Folders in MS Outlook Web Access
(Exchange 2003)
HTTP/1.1 503 Service Unavailable
I have looked in the System Manager and I get the warning
(when I click on Folders -> Public Folders) that the HTTP
service for Public Folders is not available because:
1 Public Stores not Mounted
or
2 Information Store not running.
I confirmed that the information store IS running, and
when I attempt to 'mount' the Public Store, it says it
already is mounted and I see the option to 'dismount'.
I have granted full rights to Domain Users in both the
Folders -> Public Folders and First Stoarage Group ->
Public Folder Store.
I don't know where else to go and 'Turn On' the HTTP
service for the Public Folders.
Everything else is working great for all users.
Thanks for any help or ideas!
Sincerely,
Jon Tag: global contact list Tag: 118371
OWA - change password HTTP/1.1 503 Service Unavailable
I have setup our OWA to goto mail.domain.com rather than
mail.domain.com/exchange by changing the dir location on the HTTP server. I
have made the registry changes and created the virtual dir to enable
password changes in the Options. However when I access this option the
window displays
HTTP/1.1 503 Service Unavailable. Tag: global contact list Tag: 118370
Exchange setup question
hi all,
I am planning to deploy out exchange to our LAN, but i
got a few questions. First, some background information.
We have a ADSL router, which is for our internet
connection. Behind the router, there is a sonicwall
firewall. It then connect to a switch, all other
machines and servers are plugged in this switch and
access internet through it.
There are two servers on the network, first server is the
DC, it is also our DNS and DHCP server. The second
server is the exchange server.
Our LAN is using the private class c address, which is
192.168.x.x.
I know public MX record at our ISP should be point to our
gateway at the router, which is a public IP address. i.e
203.198.x.1 . However, i am wondering how should i
configure our local server or DNS server in order to
direct all the incoming Mail traffic from the router to
our exchange server? Should i configure a local MX
record at our DNS server? e.g if our exchange server IP
address is 192.168.0.3. Then do i create a local MX
record at our local DNS server? or there is some way to
direct all the Mail traffic from our "sonicwall firewall"
to the exchange server? e.g direct all the traffic from a
specific port to the exchange server.
Any help will be greatly appreciated!! Tag: global contact list Tag: 118363
Out of office assistant
I'm trying to set up an 'out of office reply', but I
can't find it in my tools menu. On the help menu it
states that you need Microsoft Exchange Server, so I'm
assuming I don't have have it since I can't access the
facility. Can anyone help. Thanks. Tag: global contact list Tag: 118362
Exchange 5.5 on Windows 2000
Dear all,
Iâ??m trying to install a new EXCH 5.5 server on a WIN2K box. When I try to join an existing site (EXCH 5.5 server on NT 4) I get the following message:
Failed to connect to the server '<server name>' with the following error. Try a different server, or correct the error.
The Microsoft Exchange Server computer does not respond.
Microsoft Exchange Directory
DS_E_COMMUNICATIONS_PROBLEM
Any help would be highly appreciated. Thanks in advance,
Olivier Tag: global contact list Tag: 118360
Moving Exchange database to SAN
We have an organisation with an Exchange 2003 Server. We want to move the
Exchange database, which is currently on a normal server, to a SAN.
What can we encounter for issues or what are the things we need to look out
for?
Greetings,
Hans Tag: global contact list Tag: 118359
IMAP - Calendars and Contacts
Newbie question on IMAP. I'm using Outlook2003 - connected to Exchange
2003. I searched for folders and added Calendar and Contacts. The calendar
ones are readable although they apear as mail. The contacts just have the
contact name and no other information - also apear as e-mails. Is there a
way to make them appear as actual calendars and contacts? Is there
something I need to configure? If not - is there a way to actually get
contact information?
Thanks Tag: global contact list Tag: 118355
Configuring NDR copies to Public Folder
Hi
Using Exchange Server 2003.
I created a 'postmaster' mailbox that receives NDRs and then set it so that
it forwards it to another address which is a mail enabled public folder.
I get this error in the event viewer.
Event Type: Error
Event Source: MSExchangeIS Public Store
Event Category: Transport Delivering
Event ID: 2028
Date: 08/07/04
Time: 2:36:56 PM
User: N/A
Computer: APOLLO
Description:
The delivery of a message sent by public folder NDR
NOTIFICATIONS227406224D7E7D4E26D0C5A3D1DD7EA40A5CCA has failed.
To: 'notavaliduser@ebop.govt.nz'
Cc:
The non-delivery report has been deleted.
Why does it say 'message sent by public folder' when it has not received it
yet.
I've had diagnostic logging turned on MSExchange Transport and
MSExchangeIS\Public and Private. Nothing specific when a NDR is raised.
Only this event id:2028 that refers to the Public Folder.
I also tested by trying to forward to another PF, but get the same error.
The only time it works is when you have a client side rule on the mailbox to
copy messages to PF. But this requires the Mailbox to run always. The PF is
not moderated either. Created new.
Thanks Tag: global contact list Tag: 118353
Configuring a "catch-all" mailbox for Exchange
Hi All,
does anyone know if it is possible to setup a catch-all
mailbox or public folder for exchange so that all unknown
e-mail addresses delivered to the mailbox/folder?
I can't see this option anywhere. It would be very useful.
Thanks in advance.
Regard,
growson Tag: global contact list Tag: 118352
Need help setting up Front-End/Back End system with RPC/HTTP!
This is a multi-part message in MIME format.
------=_NextPart_000_000D_01C46459.171D7550
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hopefully someone can give me a quick answer to this problem.
Previously I had setup a Ex2003 server with RPC/HTTP and everything =
worked great. Just today we moved to a front end/back end setup and =
I've moved all the SSL certs and setup RPC front end back end settings =
on all servers. The problem is that clients using RPC/HTTP can connect =
to the server just fine while inside the LAN but when they leave the lan =
it does not work. It sits there "Trying to connect....". I can't =
figure it out, I've tried everything. OWA which is also on the front =
end server works fine from the outside, and I can connect to the /rpc =
directory from the outside just fine also. Any ideas??
--=20
NATHAN WALTER
Santa Barbara, CA
------=_NextPart_000_000D_01C46459.171D7550
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DVerdana size=3D2>Hopefully someone can give me a quick =
answer to=20
this problem.</FONT></DIV>
<DIV><FONT face=3DVerdana size=3D2></FONT> </DIV>
<DIV><FONT face=3DVerdana size=3D2>Previously I had setup a Ex2003 =
server with=20
RPC/HTTP and everything worked great. Just today we moved to a =
front=20
end/back end setup and I've moved all the SSL certs and setup RPC front =
end back=20
end settings on all servers. The problem is that clients using =
RPC/HTTP=20
can connect to the server just fine while inside the LAN but when they =
leave the=20
lan it does not work. It sits there "Trying to connect....". =
I can't=20
figure it out, I've tried everything. OWA which is also on the =
front end=20
server works fine from the outside, and I can connect to the /rpc =
directory from=20
the outside just fine also. Any ideas??</FONT></DIV>
<DIV><FONT face=3DVerdana size=3D2><BR>-- <BR>NATHAN WALTER<BR>Santa =
Barbara,=20
CA<BR></FONT></DIV></BODY></HTML>
------=_NextPart_000_000D_01C46459.171D7550-- Tag: global contact list Tag: 118351
How to allow a common login for mailboxes on 2 servers in 1 Admin Group
Hello,
I have 2 Exchange Servers (Exch 2k3 Std on Win2k Srv &
Exch 2k3 Enter on Win 2k3 Enter) and want to be able to
move mailboxes from the one server (Exch 2k3 Std) to the
Exch 2k3 Enter server. When I move a mailbox, that user
can no longer login via the first server. Is it possible
to allow logins via one server and maintain the mailboxes
on either server. If so, how?
Small Srv (Exch 2k3 Std)
- accept client requests via OWA and Outlook
- contain some mailboxes
Large Srv (Exch 2k3 Enterprise)
- contain bulk of mailboxes
Thanks,
-Ben Tag: global contact list Tag: 118350
upgrading exchange 2000 to 2003
Hello,
I'm planning on upgrading our Exchange 2000 server to 2003 and wanted to get some advice on my plan. First, I'll be upgrading AD and the DCs to 2003. My plan for Exchange is to
1) Install a Exchange 2003 server on one of our W2K3 servers in the same admin group of the Exchange 2000 box.
2) Move mailboxes to new Exchange 2003 box.
3) Rebuild original Exchange box to W2K3 and Exchange 2003
4) Move mailboxes back to original server
5) Remove secondary Exchange box.
Sound like a workable plan? Any caveats I should be aware of? Seems deceptively simple which always worries me. Thanks for the help.
Matt Tag: global contact list Tag: 118345
Migration from Exchange 5.5 to Exchange 2003
I am running Exchange 5.5 SP4 on Windows 2000 Server SP4
which I am trying to migrate the data to a server running
Windows 2003 Enterprise Server.
When trying to use ADC to migrate the data, the
information for the Windows Server is fine and passes but
for the Exchange server, I get an error "Server exch1:389
is not an Exchange 5.5 Server of an SRS Service".
However, the server name is correct and resolves via
DNS. I checked LDAP using netdiag and all is well.
The Exchange 5.5 version is standard while the Exchange
2003 version is Enterprise. Tag: global contact list Tag: 118341
Another Relay Question...
My server DOES NOT relay, but I have this problem...
The best way I can explain this is...the Exchange server
seems to mislead spammers into thinking my server is an
open relay, allows them to connect and upload the spam
messages but never deliver to the outside. It still
attempts to deliver the messages, queues up clogging my
system...and its getting worse each day!
The other problem is it fills up my BadMail folder with
thousands and thousands of BDR, BAD files - last weekend
I had over 50,000 files in this BadMail folder. Im
getting UNDELIVERABLE messages (my account is setup to
receive all UNDELIVERABLES from the server) at a rate of
2 or more a minute!
What can be done? There has to be a way to shut down my
servers ability to ACCEPT message from spammers even
though it doesn't forward them.
HELP! :)
Dave Tag: global contact list Tag: 118335
Intelligent Message Filtering (IMF) Setup
Given that IMF can not be setup on a E2K3 Cluster, and that it must be setup
on the bridghead server, can IMF be setup on the FrontEnd server which is
acting as the OWA server and the incoming mail server? Tag: global contact list Tag: 118333
trying to access exchange2k server through outlook on a xp home pc
Is it possible to access an exchange mailbox through a computer that is
not a member of the domain, like an xp home pc?
I am able to make the account, test it, then i am prompted for the
domain name, login and password, everything seems ok, but when I am
starting outlook(200 and 2002) I cannot access the mailbox and public
folders. What the hack do I have to do. I'm busy with this thing for two
days now! Must have some blind spot probably...
Who comes to my rescue?
Please mail to netservice@xs4all.nl Tag: global contact list Tag: 118332
Exchange migration
Hi
Our company is planning to migrate to windows 20003 and
exchange 2003 from our existing Nt4.0 and exchange 5.5.We
are also replacing all old with new compaq dl 530.There is
almost 250 users and same mail boxs for all users. When we
are migrating we don't want to loose any mail, file
permission. Our existing network is like one PDC called
company_nt and BDC is for mail server(exch01) and there
are two more bdcs.One of my new server I install NT 4.0
and made it as a BDC then isolate from network upgrade to
promote to PDC,then upgrade it to first DC in the
forest.Now usres can login to new 2003 server with old
user name and password.I made a second DC and a member
server on new server we want member server is a mail
server. When am trying to connect to Exchange 5.5 using
ADC I am getting error that exchange name ,port or
permissin problem osccur while trying to connect to 5.5
(deffrent organisation name ). I create a two way trust
between the both server,still I am getting the problem.
Please advise me is any other way I can do my migration
with least configuration changes . Tag: global contact list Tag: 118331
Question about white paper
Is there a white paper on installing Exhange 2K on a 2K cluster and/or
Exchange 2003 on a cluster
Thanks for your help in advance,
BillB Tag: global contact list Tag: 118329
AD Domain Rename with ADC running. oops.
Seems someone here decided to rename the 2003 AD domain when we had an
Exchange 2003 server running ADC to an Exchange 5.5 server. (All
users are still on 5.5 except a few test ones)
The domain name change worked until the exchange part (XDR-Fixup)
where it said you cannot have a SRS (Site Replication Service)
running. :/
So now everything is pretty messed up. They re-ran rendom and put
everything back to the original domain. (back to .local)
The ADC was just a test connection and everyone will be staying on
Exchange 5.5 for awhile longer. Is it possible to remove the ADC
(I've seen KB822450 article) and then run rendom to fix the domain
name. Then later re-run the ADC with the same exchange 5.5 email
server. Then eventually transfer over the users to the Exchange 2003
email server.
I've briefly scanned 822450 and it appears it permanently removes 5.5
from the domain. Not sure if you can reattach later.
Thanks for any help and options.
Robert Tag: global contact list Tag: 118328
Exchange 2003 Rename
Hello,
Is there a way to rename my Exchange servers without
rebuilding them from scratch? I have one BE and 2 FE
servers. I used netdom and renamed the machines fine, but
then the old names still show up in the system manager.
Once I rename, can I somehow add the new machine names to
the org? Whatever works is what I will do. Just need to
know what will work.
Thanks,
Chris Tag: global contact list Tag: 118327
Global Address book
How and where do I change how the user names are displayed
in the Global Address List? Right now they are being
displayed FirstName LastName. I want to change that to
display LastName, FirstName. Is this done in A.D. under
display name? If it is how can I change all accounts to
display correctly instead of change every account
individually? Tag: global contact list Tag: 118326
Native Mode
I am ready to complete the phasing out of my 5.5 server and all of the
documentation indicates switching Exchange 2003 to native mode after doing
so. Can I do this even if my network domain is running under W2K3 Interim
mode? Do I have to switch my network to native before I can switch Exchange?
What's the best practice? Tag: global contact list Tag: 118322
Exchange 2003 Server migration
Hello,
Could someone please give me some directions here:
I have installed two new Servers in a Windows 2000 Domain with AD, they are
on the same physical network with Windows NT 4.0 domain. I am installing
Exchange Server 2003 in the Windows 2000 Domain, it will be a fresh install,
not an upgrade (new organization, although I would like to keep the same
organization name as my Exchange 5.5 Server in my Windows NT domain).
As just mention, I have a Exchange 5.5 up and running in my Windows NT
domain with about 75-100 mailboxes. What I would like to do is migrate all
the users mailboxes and their message folders over to the new Exchange 2003
Server from the existing Exchange 5.5 Server.
What is the best method of doing this?
Any help would be greatly appreciated.
Thanks
William Tag: global contact list Tag: 118314
e3k frontend to e2k cluster backend
Can a e3k front end server in different
admnistrative/routing group access a clustered backend
e2k servers.
Frontend server can access e3k cluster in the same
adminstrative group.
Is this supported?
Thanks Tag: global contact list Tag: 118313
Exchange 2003 SP1 error
I just recently installed an MS 2003 Server and MS Exchange server 2003. I
successfully migrated from Exchange 5.5 to the new Exchange 2003 server. I
just tried to run the Exchange 2003 SP1 update and received the following
error.
Let me set this up first. I double-click on the Update.Exe file located in
the SP1 i386 folder and I get to choose what components to update. During
the install process and specifically during the "Microsoft Exchange
Messaging and Collaboration Services" part it stops on the Beginning Update
of SMTP Service sub-component. It then displays the following message:
"Setup failed while installing sub-component SMTP service with error
0xC103798A (Please consult the installation logs for a detailed
description). You may cancel the installation or retry the failed step
again." [Retry] [Cancel]
The update then continues to the next step in the update when I click the
[Cancel] button.
This is what I get in my installation log .
[07:54:03] Interpreting line <CreateProcess:C:\Program
Files\Exchsrvr\bin;regsvr32 /u /s e2kdsn.dll;180000> -- ID:31259 --
[07:54:03] Process created ... waiting (180000)
[07:54:03] Process has exited with 0x000003
[07:54:03] The command
regsvr32 /u /s e2kdsn.dll
failed, returning error code 3 (The system cannot find the path
specified.). -- ID:31136 -- ScCreateProcess
(f:\tisp1\admin\src\libs\exsetup\hiddenw1.cxx:1821)
Error code 0XC103798A (31114): An internal component has failed.
[07:54:03] CInsParser::ScProcessLine
(f:\tisp1\admin\src\libs\exsetup\hiddenw1.cxx:1225)
Error code 0XC103798A (31114): An internal component has failed.
[07:54:03] Processing file 'c:\downloads\exchange server 2003
sp1\e3sp1eng\setup\i386\exchange\smtp_update.ins', at or near line 28
(CreateProcess:C:\Program Files\Exchsrvr\bin;regsvr32 /u /s
e2kdsn.dll;180000) -- ID:31111 -- CInsParser::ScProcessLine
(f:\tisp1\admin\src\libs\exsetup\hiddenw1.cxx:492)
Any help would be greatly appreciated. My outbound Internet mail queue is
filling up.
Patrick Tag: global contact list Tag: 118308
M drive plus
Hello,
We are starting to plan our move to Exchange 2003 and do
not expect any issues since we are upgrading all
equipment. The one question is we have had issues with
our Ex2k box in that when it was built the 'domain' under
the M drive was 'company.com' yet our domain is
companydom.com. This has caused quite a few problems
with some 3rd party apps and trying to avoid in the move
to Ex2k3.
What was done wrong and how can I/we avoid this.
Thanks,
Jon Tag: global contact list Tag: 118304
Removing Exchange 5.5 server
I have installed exchange 2003 and moved mailboxes and things are working fine. I have 3 mailboxes that will not move. these mailboxes don't matter since they are not used I have read KB822450. My question is will it create problems to just delete these mailboxes when deleteing the ex5.5 computer. I have already shut down all services on this exchange server and things are running fine on the exchange 2003 box. Tag: global contact list Tag: 118302
logon failure information store ex 2003
I have installed exchange svr.std. 2003 on a member server
in a 2003 domain.
i wanted to setup a domain service account for starting
the exchange services - with rights: domain admin,
enterprise admin, exchange domain servers, schema admin -
the same account under which i installed exchange.
i thought, i must do it, as i have problems with exmerge -
says, that it has not enought rights to access the mailbox
to which it has to write - but maybe its not correct to do
it, as i read that the ex.2000 service MUST run with local
system account.
what should i do?????
exmerge log:
***********************************************************
*****
Microsoft Exchange Mailbox Merge Program, v6.5.7226.0
Start Logging:July 07, 2004 13:39:23
***********************************************************
*****
[13:39:23] Logging Level: None
[13:39:23] Reading settings from file 'C:\Program
Files\Exchsrvr\bin\EXMERGE.INI'.
[13:39:24] Error 8007203a opening an LDAP connection.
('LDAP://NT101601/rootDSE')
(CADRoutines::GetNamingContextData)
[13:39:24] Accessing Domain Controller 'NT101701'
[13:39:24] 'NT101601' is running Exchange Server 2000 or
later
[13:39:24] Destination server read from settings file
is 'NT101601'.
[13:39:24] Reading list of subjects for messages to be
selected from file ''
[13:39:24] Reading list of attachment names for messages
to be selected from file ''
[13:39:24] List of folders to be ignored has been read. 0
folders in the list.
[13:39:24] Current machine locale ID is 0x409
[13:39:24] Operating System Version 5.2 (Build 3790)
[13:40:07] Error 8007203a opening an LDAP connection.
('LDAP://NT101601/rootDSE')
(CADRoutines::GetNamingContextData)
[13:40:07] Accessing Domain Controller 'NT101701'
[13:40:07] 'NT101601' is running Exchange Server 2000 or
later
[13:40:07] Mailbox '/o=AMHS/ou=First Administrative
Group/cn=Configuration/cn=Servers/cn=NT101601/cn=Microsoft
System Attendant' will be ignored as its DN contains
strings in the ignore list
[13:40:07] Mailbox '/o=AMHS/ou=First Administrative
Group/cn=Configuration/cn=Connections/cn=SMTP
(NT101601)/cn={60206E14-CDE2-418B-873F-44E73EBBE573}' will
be ignored as its DN contains strings in the ignore list
[13:40:07] Mailbox '/o=AMHS/ou=First Administrative
Group/cn=Configuration/cn=Connections/cn=NT101601-LME-
RTDS' will be ignored as its DN contains strings in the
ignore list
[13:40:07] Mailbox '/o=AMHS/ou=First Administrative
Group/cn=Recipients/cn=SystemMailbox{60206E14-CDE2-418B-
873F-44E73EBBE573}' will be ignored as its DN contains
strings in the ignore list
[13:40:07] Found 4 mailbox(es) homed on database 'FIRST
STORAGE GROUP/MAILBOX STORE SALZBURG (NT101601)'.
[13:40:07] Ignored 4 mailbox(es) homed on database 'FIRST
STORAGE GROUP/MAILBOX STORE SALZBURG (NT101601)'.
[13:40:07] Found 4 mailbox(es) homed on the specified
databases.
[13:40:07] Ignored 4 mailbox(es) homed on the specified
databases.
[13:40:14] Using attribute 'PR_MESSAGE_DELIVERY_TIME' for
date operations.
[13:40:14] Merging data into target store. The program
will copy only those messages that do not exist in the
target store.
[13:40:14] Associated folder data will NOT be copied to
the target store.
[13:40:14] Using 'German' (0x407) as the default locale
(Code page 1252)
[13:40:14] All mailboxes will be processed, regardless of
locale
[13:40:14] Using last logon locale for all mailboxes, if
possible
[13:40:14] Initializing worker thread (Thread0)
[13:40:14] Merging data from
file 'D:\INSTALL\EXSVRSTD_EN\EXMERGE\XSTM.PST' to
mailbox 'Matthias Sturm' ('XSTM') on server 'NT101601'.
[13:40:14] Error opening message store (MSEMS). Verify
that the Microsoft Exchange Information Store service is
running and that you have the correct permissions to log
on. (0x8004011d)
[13:40:14] Errors encountered. Copy process aborted for
mailbox 'Matthias Sturm' ('XSTM').
[13:40:14] Number of items copied from the source store
for all mailboxes processed: 0
[13:40:14] Total number of folders processed in the source
store: 0
[13:40:14] 0 mailboxes successfully processed. 1 mailboxes
were not successfully processed. 0 non-fatal errors
encountered.
[13:40:14] Process completion time: 00:00:00 Tag: global contact list Tag: 118300
Added 2nd server to Site, some smtp problems.
Ok i installed a second Exchange 2003 SP1 server. The install went
without a hitch.
I then moved my mailbox from the old server to the new, again no
problems.
Logged into my mailbox no problem and verified it was reading it on
the new server.
Now problems --
I can send internal and external email just fine. I can not receive
mail at all, no rejection notices seem to be sent to the senders
either ? I.e. if i have my coworker send me an email it sends with no
rejection but i never get it, if i send mail in externally i never get
it and again no rejection email.
Why is the old server (lets call it exch1) not delivering my mail to
(exch2) it obviously knows where I am ?
Second problem is public folders, i went into public folders and added
exch2 as a replica of every folder. Even after an hour however in my
outlook i do not see any public folders ?
Suggestions ? Tag: global contact list Tag: 118299
Optimizing Memory Usage in Exchange Server 2003
Please can someone advise me what to do in the following situation:
I recently upraded my Exchange 2003 server to 4GB RAM and saw the event 9665
in the event viewer. It refers to KB815372 which details how to optimize
memory usage in Exchange.
After reading the article; I am considering putting the /3GB switch in the
boot.ini; however there are some mitigating factors in my environment.
My Exchange server is actually the DC and it has SQL2000 installed on it. (I
know, I know - terrible. Budget constraints).
I know that SQL and Exchange are both applications that are memory
hogs/lovers; so can I use the methods described in KB815372? Tag: global contact list Tag: 118298
new server..help please
i have built a new 2k server with exchange2k3 on it but
fot the life of me i cant figure out how i set up the mail
account i have created a user and given them an exchange
mail account in active directory but i cant send any mail
or receive. i dont know how to set up the actual mail
account in exchange. ie where do i put in where its
supposed to go and get its mail and which password to use
etc..
please help i have people looking over my shoulder
watching me fall.
shouldn't have said i'd do it i know but i wanted to try.
thanks in advance Tag: global contact list Tag: 118297
OWA strange problem:'Internal Server Error'
Exchange 2003 OWA:
* for ONE user only OWA is giving 'Internal Server Error'; it works only if
used with Integrated Security (when same user is in intranet logged on that
pc)
* for OTHERS all OK
Crazy!!! Tag: global contact list Tag: 118294
pop3 retrieve
Can anyone recomend any good add-ins for retrieving mails from external pop3
servers and in to Excahnge 2003?
/Andy Tag: global contact list Tag: 118291
What is 'free/busy'?
What is public free/busy data? How can I create it? or locate it?
Recently I transferred Exchange 2000 on a Win 2000 Server to Exchange 2003
on a new 2003 Server. When all was OK, I switched off the server, worked
well then removed it following instruction found in MS site.
After a week, Outlook 2000 is often giving on some PCs:
"Unable to update public free/busy data. The contents of this public folder
are currently unavailable. Either the Microsoft Exchange Server computer
servicing this public folder is down or the public folder has not been
replicated to this site."
I check MS Q284200 but settings are as expected. I ran Outlook 2000 with:
/cleanfreebusy and got this message
"unable to clean your free/busy information on the server"
All looks quite well.
Any solution?
Evan Camilleri Tag: global contact list Tag: 118290
Exchange 2000 Migration question.Trying to add a new 2k server to
Exchange 2000 Migration question. Trying to add a new 2k server to Site 2 after turning off 5.5 server
My original 5.5 Config was 1 x 5.5 Org (O1) with 2 Sites (S1) and (S2) both with Exchange 5.5 servers.
I added Exchange 2K servers to each site and Migrated the users/Public folders fine.
In Site 2 I followed the instructions to remove a 5.5 server moving Roles etc. I have turned the server off for a few weeks all works fine.
The two steps I have not done is to delete the server Object from site 2, and remove the SRS from the Exchange 2K in S2, which I think I am not meant to do until I remove all 5.5 server from the Org and want to got native.
When I try to add another 2K server to Site 2 it asks for a 5.5 server to get information about joining the Site (which I have turned off). If I delete the object will that solve the issue? The reason I have not delete the old 5.5 object was I wanted to make sure I had covered everything before I do this.
I have left the ADC running in Site2 maybe i need to stop it ?
Hope someone can help Tag: global contact list Tag: 118289
The e-mail account does not exist at the organization this message was sent to.
Hi,
I've just setup Exchange Server at our office in Mumbai, India, and am
facing a very unusual situation.
Our domain is hosted on a remote server with 10 POP E-mail id's defined as
follows:
jtalpade, tshaikh, pshanbhag, mshriyan, mmanjrekar, rumap, adivate,
rtalpade, schourasia and rramesh
On my exchange server, i have defined the following users:
tshaikh, mshriyan, mmanjrekar, rumap, adivate, rtalpade, schourasia and
rramesh
I have kept "jtalpade" & "pshanbhag" out of the exchange server user list as
they reside in a different city, viz Delhi & Bangalore respectively.
When any of the exchange users try sending mail to these external users,
they get a bounce mail from the administrator with the following message:
-----Original Message-----
From: System Administrator
Sent: Wednesday, June 23, 2004 2:59 PM
To: 'jtalpade@acumen.co.in'
Subject: Undeliverable: FW: Delivery Status Notification (Failure)
Your message did not reach some or all of the intended recipients.
Subject: FW:
Sent: 6/23/04 2:59 PM
The following recipient(s) could not be reached:
'jtalpade@acumen.co.in' on 6/23/04 2:59 PM
The e-mail account does not exist at the organization this
message was sent to. Check the e-mail address, or contact the recipient
directly to find out the correct address.
<acumen.co.in #5.1.1>
Can anyone please help me resolve this issue.
Thanks in advance.
Manoj Shriyan Tag: global contact list Tag: 118284
Activate an Eval copy of Exchange Server 2003
I am trying to activate an evaluation copy of Exchange
Server 2003 that has expired. I have the open license
authorization and license number but do not know how to
get this information into Exchange so that it knows it is
a valid copy and will stop shutting down my information
store. Any ideas?
Thanks. Tag: global contact list Tag: 118281
Public Folders Migration from Exchange 2000->2003
We are going to be moving users from our current Exchange
2000 server to a new Exchange 2003 server. We will be
moving a number of public folders as well. Both servers
are in the same organization. What would be the better
method of migration for the public folders...using the
pfmigrate utility to do all at once, or setting up an
actual replication partnership between both servers? Both
seem to accomplish the same thing.
Thanks,
Alex Tag: global contact list Tag: 118272
Notes 5.12 -> Exchange 2003
Has anyone got any experience on the migration of Notes to Exchange.
Need information like the best utility to use / pitfalls encountered / can you migrate encrypted emails and attatchments etc
Please help Tag: global contact list Tag: 118271
License eval copy of Exchange 2003
I need to license my Exchange 2003 server. If I remember
reading the readme file in the download, it said I had to
reinstall. Does this mean that I have to completely
uninstall and then reinstall?
Any help would be great.
Thanks.
Steve Tag: global contact list Tag: 118270
Non-Delivery Report Copy forwarding
Hi
I created a 'postmaster' mailbox that receives NDRs and then set it as so
that messages to this
postmaster mailbox is also forwarded to another address which is a public
folder.
I think I have the permissions right.
The PF is called 'Non Delivery Reports Postmaster' and the mailbox is
'Postmaster General Non Delivery Reports'.
The PF is a sub-folder.
Using Exchange Server 2003.
I get this error..
Event Type: Error
Event Source: MSExchangeIS Public Store
Event Category: Transport Delivering
Event ID: 2028
Date: 06/07/04
Time: 3:30:31 PM
User: N/A
Computer: APOLLO
Description:
The delivery of a message sent by public folder NON DELIVERY REPORTS
POSTM227406224D7E7D4E26D0C5A3D1DD7EA40A5C74 has failed.
To: Dave Kelly
Cc:
The non-delivery report has been deleted.
For more information, click http://www.microsoft.com/contentredirect.asp.
Help please
Cheers
RajiA Tag: global contact list Tag: 118264
OWA and Firewall
I have setup the OWA and Exchange 2003 correctly, everything works correctly but i cannot access OWA from the Internet. we just get 'page cannot be displayed' . I have setup the DNS to point to the correct server, opened every concievable port...including every TCP port...still nothing....
anyone have any ideas???
Thanks
Jim Tag: global contact list Tag: 118263
Use our ISP as mail provider
I need to setup Exchange 2003 to send mail from our ISP
(mail.Bellsouth.net). BellSouth requires authentication to do this. Can
someone tell me how to do this?
If I do set this up, will a internal Exchange users sending to an internal
Exchange user also have to go through the ISP and then back in?
Just FYI
We are currently using Novell GroupWise and planning to change to Exchange.
Some blacklisting organizations have included our IP address as being
blacklisted due to this range being part of BellSouth dial up /dynamic IP
addresses(even though we have a DLS static IP address) The best way I have
come up with to fix this is to send our mail through our ISPs mail servers
(mail.Bellsouth.net) This does produce some big problems with GroupWise
that I hope will not be a problem with Exchange. Tag: global contact list Tag: 118255
setup
Hi,
I'm researching exchange server for a mail server. When a
person purchased this software do you have everything
that you need for e-mail services in an organization?
In other words, I don't need third party software like
Mail Marshall. Am I able to create mail accounts on a
domain with just out of the box Exchange server?
Thanks for any information
MCorn. Tag: global contact list Tag: 118254
ADC OrgName Issue
Found this in my ExDeploy Log File:
- Organization and Site Names Check (OrgNameCheck)
OrgNameCheck verifies if your Exchange 5.5 organization
and site names contain unsupported characters. Details
are logged to orgnamecheck.log.
Plus this in my Orgnamecheck log file:
Warning: Organization or Site Relative Distinguished Name
(RDN) 'HealthMedia, Inc.' in the Exchange 5.5 directory
contains one or more of ,=+<>#\" characters, please see
Knowledge Base article Q281456 if you want to upgrade any
Exchange 5.5 servers to Exchange Server 2003 by upgrading
to Exchange 2000 Server first.
Is there a way to change the organization name in my 5.5
server so I can migrate the mailboxes to our new Exchange
2003 server using ADC? I found the following article on
the Knowledge Base on changing the name but it looks like
a pretty painful way of fixing this.
http://support.microsoft.com/default.aspx?scid=kb;en-
us;158028&Product=ech
Is the ADC the only way to move my users mailboxs over to
a new mail server with out exporting everything to .pst
files? Tag: global contact list Tag: 118253
Outlook Web Access in Exch 2003
Hi ,
We have outlook webaccess in Exch 2003.It works fine when
I type in ip address/exchange but doent work for
mail.abcdomain.com/exchange.
Should I create a virtual directory in IIS ?The Exchange
server s on Windows 2003 server.
Thank you Tag: global contact list Tag: 118251
ADC
I am migrating from Exchange 5.5 to Exchange 2K3. The
Migration path that I have chosen is to "Join an Existing
Organization" for coexistence purposes. I have completed
most of the Exchange 2K3 Deployment Tools task. At this
time I have not deployed ADC. Does anyone know the
answers to the following questions?
1. Is it mandatory to populate AD with the NT 4.0 user
accounts before synchronizing the NT 4.0 Security
database with the W2K3 AD?
2. Can I just Install ADC and bring the NT 4.0 user
accounts over afterwards? If so how will this impact my
migration?
3. Does installing ADC modify my Exchange 5.5 Schema?
--Thanks in advance for your help Tag: global contact list Tag: 118249
exchange 2003 Relay Config
I need to allow my new Exchange 2003 server to relay
email from my web-server which in inside the same domain
and inside the firewall.
In 2000 and 5.5 I was able to configure authentication
via 'access' from the Default SMTP Virtual Server
Properites panel, but I can't seem to find this GUI
anywhere.
I have the SMTP Connector properties panel which is
configured correctly.
Where would I go inside System Manager to configure
this? Is it somewhere in IIS?
Thanks in advance!
Jon Tag: global contact list Tag: 118246
uninstalling exchange 2003?
recently I had installed the first and only exchange 2003 server (running on
server 2000)
it was running fine until because of a KVM switch problem I had to hard shut
it down, and now the server in general is acting sick
I tried to repair windows and some other things, but I am now tempted to
just redo the server since it only has 2 mailboex on it right now
what steps do I take to start over? I know to AD demote the server, but how
do I cleanly uninstall exchange 2003 from my AD domain? Tag: global contact list Tag: 118245
We are setting up a exchange 2003 server running on
W2k03. Is there a way to add a picture of the person into
the global contact list?