OMA Logon/Logout Screen.
I have two questions regarding Outlook Mobile Access.
1) Is it possible to modify the logon screen so that it includes our
domain name? Currently we have to enter "Domain/User". We are
looking for a way to have "Domain/" already there when the page loads.
2) Is there a way to logout? So far the best way is to just restart
the our phones. I was just curious if the feature existed.
Thanks. Tag: Exchange 2003 release date. Tag: 104755
Cannot see contacts in Exchange 2003 OWA
Hello!
I just installed the release candidate of SBS 2003 with Exchange 2003. I was
using Outlook 2002 with a PST file holding my mail and contacts. I set up an
Exchange mailbox and imported my Inbox and Contacts folders (and sub-folders
for the contacts) from the PST to my Exchange mailbox Inbox and Contacts
folders. All of my contacts are in subfolders of the Exchange server's
Contacts folder...only one test user is directly in the Contacts folder. I
set all Contacts subfolders with "Show this folder as an email address book"
box checked for the folder.
From Outlook, I can see the Contacts and subfolder, and I have it open to my
Contacts\Personal subfolder by default.
Using OWA. when I open a new message and click on To..., all I see is the
Contacts folder and no subfolders.and only that one test user (directly in
Contacts folder) is visible from OWA. None of the subfolders is visible from
OWA...all I see is Global Address List (empty) and Contacts (with the one
test user name).
I want my subfolders to be visible from Outlook and from OWA. Do I even have
my Contacts in the right place?
Any ideas will be most appreciated!
Thank you!
Gregg Hill
P.S. Do I have to manually convert all my mail rules to work from the
server? They say "client-only" after them. Tag: Exchange 2003 release date. Tag: 104754
Exchange 5.5 Migration from NT4.0 to Windows 2000 Server
Dear Sir ,
I am planning for migrationg my Exchage 5.5 server from my
old server ( NT4.0 Server with SP6a ) to a new server (
Windows 2000 Server ). How can I go about it ?
Regards
Soon Tag: Exchange 2003 release date. Tag: 104751
Outlook Web Access Setup
I've just set up my new Exchange SErver 2003. Now I need
to set up OWA. Can you give me some direction becuase the
documentation I've found leads me to believe I need
a "Front End" Exchange Server and a "Back End" Exchange
Server. I only have one server but still need to have
Outlook Web Access.
Your help is greatly appreciated.
Jody Tag: Exchange 2003 release date. Tag: 104748
How to UnInstall ?
Group,
I had to change the domain name after Win 03 AD and
Exchange 03 were installed. I tried to re-install
Exchange 03 and it will not - it asks for 5.5 info.
How do I remove it fully and re-install?
Thanks,
Ray Tag: Exchange 2003 release date. Tag: 104743
How to UnInstall ?
Group,
I had to change the domain name after Win 03 AD and
Exchange 03 were installed. I tried to re-install
Exchange 03 and it will not - it asks for 5.5 info.
How do I remove it fully and re-install?
Thanks,
Ray Tag: Exchange 2003 release date. Tag: 104742
exchange server,HELP PLEASE!
AM TRYING TO SETUP A MICROSOFT MAIL ACCOUNT IN MY
MICROSOFT OUTLOOK,AND I NEED TO KNOW THE MICROSOFT
EXCHANGE SERVER TO ADD A NEW MAIL BOX,AM USING WINDOW XP
PROFESSIONAL,PLEASE HOW CAN I KNOW MICROSOFT EXCHANGE
SERVER,TO SET UP A NEW MAIL IN MICROSOFT OUTLOOK. Tag: Exchange 2003 release date. Tag: 104737
outlook error,its killing me
PLEASE,HOW CAN I CONFIGURE MY OUTLOOK EXPREE WITH ANOTHER
EMAIL ACCOUNT ALL I GOT IS ERROW IF AM TRYING TO SEND
MAIL OR SYNCRONIZE THIS TWO ACCOUNT TOGETHER,I HAVE NO
PROBLEM WITH MICROSOFT OUTLOOK,THE PROBLEM IS WITH
OUTLOOK EXPRESS,SOMEONE HELP PLEASE. Tag: Exchange 2003 release date. Tag: 104736
2000 to 2003
I was trying to upgrade my Exchange 2000 to Excahnge 2003 and am getting
the following message:
[23:44:11] - Setup is unable to access the Site Replication Service
database. Please verify that the SRS service is started and you have
Administrative rights to the Exchange 5.5 Organization, Site, and
Configuration containers for this server. -- ID:64817 --
[23:44:11] Prerequisites for Microsoft Exchange Messaging and
Collaboration Services failed: The component "Microsoft Exchange
Messaging and Collaboration Services" cannot be assigned the action
"Upgrade" because:
- Setup is unable to access the Site Replication Service database.
Please verify that the SRS service is started and you have
Administrative rights to the Exchange 5.5 Organization, Site, and
Configuration containers for this server.
This machine was upgraded from 5.5 about 18 months ago and the ADC was
unistalled. Any ideas would be good.
Thaks.
Jeff Senter Tag: Exchange 2003 release date. Tag: 104728
Moving organizational forms without Mig Wiz???
We are migrating from an Exchange 2000 to Exchange 2003 architecture. Due to some design considerations we cannot migrate System Folders over... How do I get our organizational forms over? I don't have a good enough understanding of where my personal forms library is stored to know whether publishing to my personal library and moving that somehow will work...
I tried publishing the forms to a folder, and then exporting the folder to .pst, but that doesn't keep the forms attached if i then re-open that .pst with an account on the new exchange box. The forms are no longer there.
Anybody out there in Exchange world got any ideas? Tag: Exchange 2003 release date. Tag: 104724
error while doing Exchange 2003 forestprep
I have a Windows 2000 Adv. DC with Exchange 2000 installed on it, I'm doing
an Exchange 2003 forestprep so that I can upgrade my Exchange to 2003.
during the forestprep process and in the (creating templates) phase I got an
error "setup failed while installing sub-components Microsoft exchange
organization-level container children with error code 0x80072020 please
consult installation log for detailed description. You may cancel the
installation or try the setup again" ending up the setup.
here is the part of the error from the log.
--------------------------
[14:01:30] User has enough permissions to update templates.
[14:01:35] CAtomOrgCtChildren::ScUpdateTemplates - failed to get a list of
templates
(f:\titanium\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:
2671)
Error code 0X80072020 (8224): An operations error occurred.
[14:01:35] CAtomOrgCtChildren::ScUpdateTemplates
(f:\titanium\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:
2802)
Error code 0X80072020 (8224): An operations error occurred.
[14:01:35] Leaving CAtomOrgCtChildren::ScUpdateTemplates
[14:01:35] CAtomOrgCtChildren::ScAddDSObjects
(f:\titanium\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:
192)
Error code 0X80072020 (8224): An operations error occurred.
[14:01:35] Leaving CAtomOrgCtChildren::ScAddDSObjects
[14:01:35] mode = 'ForestPrep' (61965) CBaseAtom::ScSetup
(f:\titanium\admin\src\udog\setupbase\basecomp\baseatom.cxx:842)
Error code 0X80072020 (8224): An operations error occurred.
[14:04:01] >>>>>>>>>> Setup encountered a fatal error during Microsoft
Exchange Forest Preparation of ForestPrep component task. -- ID:62237 --
CBaseComponent::ScSetup
(f:\titanium\admin\src\udog\exsetdata\components\forprep\compforprep.cxx:513
)
Error code 0X80072020 (8224): An operations error occurred.
[14:04:01] Entering
CBaseComponent::SetSubtreeComponentsToFailWithErrorInSetup
[14:04:01] Leaving
CBaseComponent::SetSubtreeComponentsToFailWithErrorInSetup
[14:04:01] CCompForestPrep::ScSetup
(f:\titanium\admin\src\udog\exsetdata\components\forprep\compforprep.cxx:613
)
Error code 0X80072020 (8224): An operations error occurred.
[14:04:01] Leaving CCompForestPrep::ScSetup
[14:04:01] CComExchSetupComponent::Install
(f:\titanium\admin\src\udog\bo\comboifaces.cxx:829)
Error code 0X80072020 (8224): An operations error occurred.
[14:04:01] Entering ScQueueWatsonErrorReport
[14:04:03] Leaving ScQueueWatsonErrorReport
[14:04:03] Entering CCompRoot::ScPostSetup
[14:04:03] Leaving CCompRoot::ScPostSetup
[14:04:06] CComBOIFacesFactory::QueryInterface
(f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
Error code 0X80004002 (16386): No interface.
----------------------------
so please any one can help because this is preventing me from upgrading my
system.
Thanks Tag: Exchange 2003 release date. Tag: 104722
IISLockdown Problems
Hi,
can´t access public folders in system manager after installing iislockdown
(The operation failed due an internal server error. c1030af2)
Everytime I try to uninstall iislockdown I get the following message:
Starting undo...
Backing up IIS metabase...
Restoring file permissions...
Unable to restore ACL on file: Der Prozess kann nicht auf die Datei
zugreifen, da sie von einem anderen Prozess verwendet wird.
Undo did not complete
I already reinstalled IIS and exchange 2000. But I´ve still the same
problems as before. Furthermore I get the failure id 1022 and I think it´s
an aftereffect of iislockdown.
Can anyone help me?
Jens Tag: Exchange 2003 release date. Tag: 104718
Exchange 5.5 -> 2000 upgrade error
Hello
If anyone could please help me with that, I really don't know what to do.
When I started to upgrade my Exchange 5.5 server to 2000 I got the
following error:
"The component Microsoft Exchange Messaging and Collaboration Services
cannot be assigned the action upgrade because You must use the same edition
of Microsoft Exchange 2000 Setup (Enterprise or Server) as the existing
installation
My existing installation was installed from MSDN CD (Exchange 5.5.), now I
have original CD Microsoft Exchange 2000 (rev A). I also
tried to install E2k from Small Business Server 2000 with the same error
Please help !!!
Regards
Miha Tag: Exchange 2003 release date. Tag: 104716
Trust relationship- 2- 2003 domains
Hi;
I have two A/D domains and both are 2003 Standard server.
Domain 1 was migrated from Windows 2000
Domain 2 is fresh install 2003
I am trying to establish a trust relationship between the
two but keep getting the following message:
"You cannot modify domain or trust information because a
Primary Domain Controller (PDC) emulator cannot be
contacted. Please verify that the PDC emulator and the
network are both online and functioning properly."
I am at a loss & can't find a KB on this either. This
error happens when I try to get properties of the domain
1 in the AD Domains and Trusts window.
Any ideas what is causing this?
in Domain 2 I can get the properties but when I try to
search for Domain 1 it says it is inaccessible.
Regards,
Kami Tag: Exchange 2003 release date. Tag: 104707
Outlook error
Hi,
I've setup Exchange 2003 which works fine, but the only
problem i'm encountering is that i cannot add mailbox to
Outlook. It gives me following error.
"The action could not be completed. the name could not be
matched to a name in the address list."
Any ideas?
Please and thank you Tag: Exchange 2003 release date. Tag: 104706
Exchange 2003
I have installed the eval version of Exchange 2003 because
I couldn't wait to get my license. How can I apply the
licensed version once I receive it? I have my evaluation
version fully setup and designed the way I want, and I
don't want to go back.....
Also, how can I determine if I have the enterprise or
standalone version?
Thanks. Tag: Exchange 2003 release date. Tag: 104705
Inpace upgrade halted
While upgrading from Exchange 5.5 to 2000 server was restarted. It was at teh point of restarting the exchangesa service. Version looks as if it is still Exchange 5.5 but information store will not start. Both edb's are consistent.
HELP Tag: Exchange 2003 release date. Tag: 104703
MS Exchange 2003 - I am desperate!
As I am trying to migrate my Exchange mailboxes from an NT server with Exchange 5.5 over to my new Server 2003 with Exchange 2003, I am constantly getting an error message. I can see the mailboxes on the NT server, and I can even initiate teh migration process, but without fail, I get the error message. The message states that I need to check my application log, and when I do, the log file has a link to a website containing what is supposed to be the solution. Instead I get a notice stating that I need to install Service Pack 3, in which there is no SP3 for Exchange. I am in a severe crunch and need serious help! Tag: Exchange 2003 release date. Tag: 104702
POP3 access doesn't works...
Hi,
I'm trying to access my exchange server 2003 with the POP3 protocol, but I
allways received a logon error "-ERR Protocol error"
with the telnet command line, I can reach the server, but I can't be
authenticated !
any idea of the problem ?
thanks.
Jerome. Tag: Exchange 2003 release date. Tag: 104701
Rename Exchange 2003 Server Name
Any ideas on how-to rename Exchange 2003 (not the Windows
2003 nor the AD domain name) server name?
Thank you, Tag: Exchange 2003 release date. Tag: 104695
Memory not optimal
Event Type: Warning
Event Source: MSExchangeIS
Event Category: General
Event ID: 9665
Despite me carrying out all the memory tweaks very
carefully I still get these abboying messages. There is an
option to disable these messages, but i'd rather do
another tweak if I need to. Does anyone else know what
this is all about. Please assume I have done all the
changes asd laid out in the documentation on this subject.
(I have 2Gb ram). My boot.ini contains:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows
Server 2003, Standard" /fastdetect /3GB /userva=3030
Date: 25/10/2003
Time: 16:09:45
User: N/A
Computer: SERVER
Description:
The memory settings for this server are not optimal for
Exchange.
For more information, click http://support.microsoft.com?
kbid=815372
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 08 00 00 00 Tag: Exchange 2003 release date. Tag: 104691
Please help
I installed Exchange 2003 on member server and when i
create a new user and a mailbox for him it works fine,but
the mailbox never appears in System Manager and therefore
i cannot connect to it either from Outlook or OWA.
Is there some kind of trick to make it work?
Thanks for your answers Tag: Exchange 2003 release date. Tag: 104690
OWA 2003 and Exchange 2003
Does anyone have any step by step instuctions for
installing Outlook Web Access 2003 on a differnt server
than what Exchange 2003 is on. Can this be done with
Exchange 2003? Tag: Exchange 2003 release date. Tag: 104689
new site setup
I am using exchanage server 5.5. The domain name lets say
is abcd.com. All users are having the email address of the
form user@abcd.com.
Now I want to have some users email address like
user@jklf.com. This means that I have to add up an another
domain or I have to setup another server on new hardware
having this domain as the site name.
IS there any documentation that will tell me what to do
exactly and in which direction should I proceed.
Thanks. Tag: Exchange 2003 release date. Tag: 104677
OWA access Front-end server not passing authentication to Back-end
Here is my Config:
Back-end Cluster running Win2k3 and Exch2k3
Front-end Single Server running Win2k3 and Exch2k3
I just added the Front-end server and I'm trying to move
the OWA access point to the server.
Here is the problem:
When I connect to https://webmail.server.com/exchange I
get the error "The page must be viewed over a secure
channel" which I'm doing.
I've looked at the Exchange and Exchweb website
configurations and they are exactly the same as my
clustered back-end servers which I had OWA working
perfectly.
I've tried to remove the SSL certificate and removed the
requirement for SSL on the Back-end servers, but I still
get the same error.
I finally tried to remove the SSL certificate and removed
the requirement for SSL on the Front-end server, then it
seems as if the Front-end server doesn't pass the
authentication to any DC. I try to logon and I keep
getting the username and password window. After the 3rd
window I get the following error: "Error: Access is
Denied."
Could someone please help me with this one.
Thanks,
Will
Please post all reply to the newsgroup, so everyone can
benifit. Tag: Exchange 2003 release date. Tag: 104669
eval questions.
I have AD running on 2003 in a production enviroment. We
do not use exchange at all. I have install the exchange
eval in a test AD enviroment. I am thinking about
installing the eval copy into a production domain so a few
users and see it. By installing the eval copy of exchange
in my production AD do I put my production directory at
risk in any way. I plan to kill the eval exchange server
at some point.
Thanks Tag: Exchange 2003 release date. Tag: 104650
Exchange Server 2003 Eval setup
I'm running a Windows 2000 Server with SP 1-4 installed in "localmode" on the local machine. I'm trying to install the
Exchange Server 2003 Eval. I keep getting "custom" install screens, and can seem to install the version at all, any help with this. Has anyone has problems on the install as well? Tag: Exchange 2003 release date. Tag: 104647
PIX FIREWALL E2k3
I finally migrated to exchange, but I see the kb artibles
on having the exchange server behind the PIX firewall.
Obvsiouly the 2 big giants dont like each other.
I put the no fixup smtp 25 command in on my firewall, but
I am still getting the relay message??? Does any one
know what SMTP INpections is and how to turn it off?? Im
fairly certain the Microsoft solution is to buy anoyher
exchange server and use it as a bridge.. Too funny.. any
serious help would be appreciated. Also, how vulnerable
am I making my network by disabilig these security
features from cisco> Tag: Exchange 2003 release date. Tag: 104646
Error in ADCTools.log
I getting the folling error message in the log when I run
the Connection Agreement Wizard Verify option.
-------------------------------------------
-ADC object replication verify 10/24/2003 10:13:42
Active Directory Connector Object Replication Check
completed. No unreplicated objects found.
-Warning: Active Directory still contains objects that are
not replicated to the Exchange 5.5 directory. If you have
just run Connection Agreement Wizard, allow time for
directory replication to complete, and then rerun the
verification task in Step 4. Otherwise, run the Connection
Agreement Wizard.
----------------------------------------------
It's been more than 24 hours and I'm still getting this
warning. I only have 1 Exc 5.5 server as it's in the same
domain. Someone please let me know how should I fix this
warning and can I continue forward inspite of this
warning. And also I don't see any Exchange Tabs in AD
Users and Group, when does these option suppose to show
up.
Thanks
Sura Tag: Exchange 2003 release date. Tag: 104644
question about the domain requirement
Can 2 exchange5.5 in the same site but in different
domain?
Let say, I have ExchangeA in Domain A with site name
called 'siteA' & I setup another ExchangeB in Domain B.
Can I put ExchangeB in siteA if Domain A & B are not
trusted.
Physically, they are in 2 different subnet but they are
able to ping each other. Tag: Exchange 2003 release date. Tag: 104642
Routing multiple e-mail domains
I have an exchange server that handles mail for multiple domains. For the sake of this question, domain 1 is xyz.com and domain 2 is abc.com. I want to send xyz.com to a smart host so that a spam filtering software which is located on a different server can track outgoing mail. However I do not want to send abc.com to that server. I want abc.com to use the default virtual server already created in exchange. I can't find any information on how I would pull this off. Thanks in advance for any help anyone can offer me. Tag: Exchange 2003 release date. Tag: 104641
Help, Need moving Exchange 5.5 w/ AD installed to another domain's AD
Hi:
I have a Windows 2000 environment. I also have 2 domains
in this environment (Domain-A and Domain-X). Within
Domain-A is the AD. All Users on the network login to
Domain-A. I also have another domain on the same network
this is Domain-X. Domain-X is the domain where the
Exchange 5.5 Server resides. Basically, I have 2 running
Active Directory's on the same network, 1 for exchange
5.5 and 1 for basic file server and print server access.
How do I move the Exchange 5.5 server from Domain-X into
Domain-A? The AD in Domain-A has the same User Accounts
in at has in Domain-X. I need the User Accounts from
Domain-A to be able to match up with mailboxes in
Exchange 5.5. Can this be done? I know that the
mailboxes from Domain-X can only be accessed from the
User Account wth the SID that it was created with. Being
that I will be demoting my Exchange 5.5 Server from a
Domain Controller to a member server, I need to be able
to have the User Accounts from the other domain (Domain-
A) link up with the mailboxes from Domain-X) Will SIDs
be a problem here?
Many thanks in advance.
Steve Tag: Exchange 2003 release date. Tag: 104638
Exchange 5.5 Upgrade
I was hoping someone could give me the best, method to
move my 5.5 server from a remote site to a new server at
another site then migrate to 2000.
We are a small organization of about 50 users with a t-1
between the sites. We use OWA as well. I'd like to
migrate the 5.5 server to the new server as 5.5 then move
my company to AD from the nt4 domain structure. Then
migrate to ex2000.
Can someone help?
Thanks,
Phil Tag: Exchange 2003 release date. Tag: 104637
Exchange 5.5 to 2000 migration problem
All,
I am in the process of migrating my exchange 5.5 server
to exchange 2000. The 5.5 server has a different domain
name than the 2000 server ( lets call them
domainA@mail.com and domainB@mail.com respectively). All
of the steps have worked flawlessly up to the point where
I have to move the mail boxes. I moved a test mailbox
over to the 2000 server. Everything seemed to work
fine. Problem, if mail is sent from the outside to
domainA@mail.com it automatically gets "forwarded" to
domainB@mail.com as if it were sent there. The problem
comes when mail is sent internally to domainA@mail.com
the message keeps bouncing and never reaches
domainB@mail.com. Why would this happen on internal mail
and not external mail.
Thanks in advance,
Mark Tag: Exchange 2003 release date. Tag: 104636
Failed Exchange 2K3 Re-install
Hi,
I'm currently running the Exchange 2k3 RTM eval. We
purchased the full licensed version and i went to do a re-
install, per the RTM read-me (to upgrade to the licensed
version).
During the re-install, it stops while trying to copy
ALSPERF.DLL . (it comes up with the "can't find this file,
but it's right there on the CD in the right spot). If I
say to cancel that copy (figuring I can copy the file
later), it then stops at the copy of alsperf.ini and just
freezes.....
Any Idea what could be causing that problem?
Thanks,
Larry Ventura Tag: Exchange 2003 release date. Tag: 104634
OWA - Send Items
Boas ,
Alguem sabe como mudar no OWA nos Send Items o campo FROM: para TO:
Obrigado
Paulo Tag: Exchange 2003 release date. Tag: 104633
MS Exchange 2003 vs Win 2003 Server Web Edition
Hallo everybody,
can anyone tell me if I can install MS Exchange 2003 on Win 2003 Server Web
Edition?
It seems to me that it doesn't work.
Thanks in advance.
Alex Tag: Exchange 2003 release date. Tag: 104626
RPC errors while communicating with Exchange 5.5 servers
We have installed two exchange 2000 servers into exiting exchange 5.5 site
which has two exchange 5.5 servers.
MAILSRV1 - Exchage 5.5 server SP4[bridgehead]
MAILSRV2 - Exchange 5.5 server SP4
MAILSRV3 - E2K server SP3
MAILSRV4 - E2K server SP3
MAILSRV1,2 eventlog is logging the following errors every 10 minutes and
there is no mail flow from MAILSRv1,2 to MAILSRV3,4. If users who are having
mailboxes on MAILSRV3,4 sends mail, it is stuck in X400 queue. Mail
receive/send from MAILSRv3,4 mailboxes is stopped.
Source : MSExchangeMTA
Category : Interface
Event ID : 9318
Description:
An RPC communications error occurred. Unable to bind over RPC. Locality
Table (LTAB) index: 79, NT/MTA error code: 5. Comms error 5, Bind
error 5, Remote Server Name MAILSRV4 [MAIN BASE 1 500 %10] (14)
Source : MSExchangeMTA
Category : X.400 Service
Event ID : 289
Description:
A connection to /O=ABC/OU=XYZ/CN=CONFIGURATION/CN=SERVERS/CN=
MAILSRV4/CN=MICROSOFT MTA could not be opened. [MTA XFER-IN 17 26] (12)
Source : MSExchangeMTA
Category : Interface
Event ID : 9318
Description:
An RPC communications error occurred. Unable to bind over RPC. Locality
Table (LTAB) index: 80, NT/MTA error code: 5. Comms error 5, Bind
error 5, Remote Server Name MAILSRV3 [MAIN BASE 1 500 %10] (14)
Source : MSExchangeMTA
Category : X.400 Service
Event ID : 289
Description:
A connection to /O=ABC/OU=XYZ/CN=CONFIGURATION/CN=SERVERS/CN=
MAILSRV3/CN=MICROSOFT MTA could not be opened. [MTA XFER-IN 17 26] (12)
Microsoft article Q327004 explains this problem
(http://support.microsoft.com/default.aspx?scid=kb;%5bln%5d;327004) but that
did not work for us.
I tried putting all the mailservers on the same switch.
Ping, net view commands work fine. I tried Rpings toolalso. that was
successful.
Mailbox move from MAILSRV1,2 to MAILSRV3,4 works fine.
What could be the problem ? Please help. This is very urgent. Tag: Exchange 2003 release date. Tag: 104625
Users not appearing in GAL
After creating multiple users in AD the users do not show up in
the GAL. I've updated and rebuild the RUS -and nothing.
Recipient policies aren't being applied either (users email address not
automatically created smtp/x400).
-Windows 2000 Adv.Srv
-Windows 2000 Exch.Srv (Enterprise)
Thanks in adv.
-NET Tag: Exchange 2003 release date. Tag: 104621
EX2003 trying to join a 5.5 site can't enter serivce account info...
I'm trying to install Exchange 2003 (on a 2003 server) to join an
existing 5.5 site which has two servers (one running on NT the other
on 2000). The ADC is installed, running, and working.
The problem comes during the exchange installation after I say I want
to "Join or upgrade an existing Exchange 5.5 Organization".
The "Service Account" information window that follows has the "User
Name", "Domain" fields and "Browse" button grayed out. The only
active field is "password". So I try the Service account password, no
password, other passwords and all I get is the error: "This account
must be valid before continuing".
Any ideas? Tag: Exchange 2003 release date. Tag: 104620
Upgrade pain
Hi,
Currently we are upgrading our only exch 5.5 server to Exch 2k3 and the
dsscopescan is failing. ExDeploy.log has the following message:
Error: Could not connect to the Exchange 5.5 server 'Corp'. Tools that
require an Exchange 5.5 server will not run
I did run NetDiag and Dcdiag and both ran with no errors or warning.
This is the only exchange server we have also this is the only site we have,
the new server is a domain controller on the same network as the exchange
5.5 server which is also a domain controller. Our configuration is as such
Exchange server 5.5 SP4 running in a windows 2K Sp3
The new server which we are planning to install Exch 2k3 is running Windows
2k SP4.
Both the old and new servers are on the same network and both are Domain
controllers. I can access either server resources form the other.
I am logged on as the domain administrator.
I have followed MS Migration White papers and ran ForestPrep and DomianPrep
successfully.
You are help is greatly appreciated and thank you in advance. Tag: Exchange 2003 release date. Tag: 104615
Upgrading E2k3 machine
I have E2k3 on a W2k machine in a W2k domain. I want to
upgrade the DC and member server running W2k & E2k3 to
W2k3. Is this possible and what are the steps? Any
precautions to take?
Thanks in advance Tag: Exchange 2003 release date. Tag: 104611
Problem with Installation
Hi everyone,
i want to set up an exchan03 server (SBS) to offer the following features
for our users:
due to the fact that we have serveral internet domains at use at the
moment... the server should be able to handle three or more idomains
the user should be able to select in his outlook 2003 which emailsaddress i
wants to use (user@domains1.com or user@domains2.com etc)
the user should be able to connect via Imap/pop3 to the server
the user should be able to connect to the exchange server by using the setup
item (exchange server) this means that not only mails should be syncronized
e.g. pop3/imap. even the contacts and kalender staff should be transmitted.
over the inet (not in lan)
please could u provide some helpful links for me....
Cheers
Christian Tag: Exchange 2003 release date. Tag: 104610
Allocate space to email account
Does Exchange 5.5 have a feature that can automatically allocate mailbox space to an account? Can I set a minimum and maximum limit when I setup the account? Tag: Exchange 2003 release date. Tag: 104608
Please help to verify ADC connection steps
Can you please verify the steps
I have 3 sites with 2 way trust
Site 1 - AD 2003, Exch5.5
Site 2 - Nt4.0, Exch 4.0
Site 3 - Nt4.0, Exch 4.0
User and groups from Site 2 and 3 are not in AD. Exchange
is 1 org with 3 sites.
Migration step
1. ADC recipient connection from site 2 and site 3 to
fill AD with contact with email address
2. DS/IS Consistency
3. Public folder connection agreement
Let me know if these steps are right.
regards
Ronnie Tag: Exchange 2003 release date. Tag: 104607
installing Exchange 5.5 on Windows 2000 server
Hi
I've been doing Exchange 2000 administration but have not
had much experience with Exchange 5.5.
My company wants me to install Exchange 5.5 to test our
new email filtering product. I can only get my hands on a
Windows 2000 server to do this. I was able to install
Exchange 5.5 ok. The services seem to come up but I don't
seem to be able to connect to it using Outlook 2000? I
have not installed any Exchange 5.5 Service Pack. Would
that explain the problem I'm having? I'm downloading the
service packs and will install it in the morning but am
just curious if there's just some problem with installing
Exchange 5.5 on windows 2000.
I'd really appreciate any and all pointers!
Derek Tag: Exchange 2003 release date. Tag: 104603
How to impose relay and connection setting on the Exchange server?
I want to allow my user's network (a specified ip network)
to send e-mail via my Exchange Server, other users (out of
this specified ip network) are not allowed to send e-mail
via this Exchange server.
Is there some settings like relay/connection that can
restrict the Exchange server to provide service for
particular ip subnet or range of ip subnet?
Thanks. Tag: Exchange 2003 release date. Tag: 104601