-----------------------------------------------------------------------------------------------
CROSS POSTED to MICROSOFT.PUBLICWINDOWS.SERVER.SBS
------------------------------------------------------------------------------------------------
PROBLEM: CANNOT RECEIVE EMAIL FROM THE INTERNET TO EXCHANGE SERVER
all mail goes to the backup MX - took it out temporarily and that just gives
NDRs
I've been at this for three days just trying to get the exchange server to
recieve mail but I'm stuck and need some things to try.
________________________________________________________________________
SYSTEM: SBS 2003 Standard SP1
Dell PowerEdge 1800 - dual Zeon 3.2 ht - 1 gig RAM - RAID 5 =300 gig
2 NIC cards - server side 192.168.16.2 - wild side 216.19.xx.115
_________________________________________________________________________
I've taken out all equipment between internet and the seconf NIC to get this
going (Iwill deal with the firewall after I figure out what's wrong)
_________________________________________________________________________
Website allows me to change my own DNS records for the domain wolaz.com
I've added the records to point mail.wolaz.com at 216.19.xx.115

wolaz.com. IN MX 10 mail.wolaz.com
mail IN A 216.19.xx.115

I've used the mail system for the website as the backup MX
_________________________________________________________________________

----------------------------------WHAT I'VE
DONE------------------------------------------
_________________________________________________________________________
Ran the CEICW the folowing settings with no Problems
1 - Direct Connection to Internet
2 - Broadband NIC to External NIC
Network NIC to internal NIC
3 - IP - SUBnet - Gateway all from the ISP
DNS from my ISP (not Web Hosting Provider)
4 - Firewall enabled (with email open)
5 - Allow Access only to Outlook Web Access
6 - Web Certificate [mww.wola.com] (alias to get to Outlook web Access)
7- Enable Internet E-mail
8 - Use DNS to Route (this Works!)
9 - Use Excahnge - Email is directed to the server
10 - Email domain name [wolaz.com]
11 - Attacments to a local directory
_____________________________________________________________________
SMTPDIAG
Checks out
_____________________________________________________________________
PortReporter says I'm listening on 25 TCP but not UDP
_____________________________________________________________________
DNS REPORT cannot connect to the port 25
_____________________________________________________________________
Telnet Local wolaz.com 25 connects
Telnet External wolaz.com 25 WIL NOT CONNECT
Telnet External mail.wolaz.com 25 connects
_____________________________________________________________________
Thank You in Advance for any help
Jeff

Re: Exchange Help Please! by Ed

Ed
Thu Sep 22 22:43:22 CDT 2005

When I do:
telnet mail.wolaz.com 25
the connection times out with no response. You probably have a problem with
your firewall, or NAT mappings, or some such. Check your firewall to be
sure that it isn't "fixing" SMTP.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Wolarus" <wolarus@word-of-life.net> wrote in message
news:OVQ8Be6vFHA.3556@TK2MSFTNGP12.phx.gbl...
> -----------------------------------------------------------------------------------------------
> CROSS POSTED to MICROSOFT.PUBLICWINDOWS.SERVER.SBS
> ------------------------------------------------------------------------------------------------
> PROBLEM: CANNOT RECEIVE EMAIL FROM THE INTERNET TO EXCHANGE SERVER
> all mail goes to the backup MX - took it out temporarily and that just
> gives
> NDRs
> I've been at this for three days just trying to get the exchange server to
> recieve mail but I'm stuck and need some things to try.
> ________________________________________________________________________
> SYSTEM: SBS 2003 Standard SP1
> Dell PowerEdge 1800 - dual Zeon 3.2 ht - 1 gig RAM - RAID 5 =300 gig
> 2 NIC cards - server side 192.168.16.2 - wild side 216.19.xx.115
> _________________________________________________________________________
> I've taken out all equipment between internet and the seconf NIC to get
> this
> going (Iwill deal with the firewall after I figure out what's wrong)
> _________________________________________________________________________
> Website allows me to change my own DNS records for the domain wolaz.com
> I've added the records to point mail.wolaz.com at 216.19.xx.115
>
> wolaz.com. IN MX 10 mail.wolaz.com
> mail IN A 216.19.xx.115
>
> I've used the mail system for the website as the backup MX
> _________________________________________________________________________
>
> ----------------------------------WHAT I'VE
> DONE------------------------------------------
> _________________________________________________________________________
> Ran the CEICW the folowing settings with no Problems
> 1 - Direct Connection to Internet
> 2 - Broadband NIC to External NIC
> Network NIC to internal NIC
> 3 - IP - SUBnet - Gateway all from the ISP
> DNS from my ISP (not Web Hosting Provider)
> 4 - Firewall enabled (with email open)
> 5 - Allow Access only to Outlook Web Access
> 6 - Web Certificate [mww.wola.com] (alias to get to Outlook web Access)
> 7- Enable Internet E-mail
> 8 - Use DNS to Route (this Works!)
> 9 - Use Excahnge - Email is directed to the server
> 10 - Email domain name [wolaz.com]
> 11 - Attacments to a local directory
> _____________________________________________________________________
> SMTPDIAG
> Checks out
> _____________________________________________________________________
> PortReporter says I'm listening on 25 TCP but not UDP
> _____________________________________________________________________
> DNS REPORT cannot connect to the port 25
> _____________________________________________________________________
> Telnet Local wolaz.com 25 connects
> Telnet External wolaz.com 25 WIL NOT CONNECT
> Telnet External mail.wolaz.com 25 connects
> _____________________________________________________________________
> Thank You in Advance for any help
> Jeff
>
>
>
>



Re: Exchange Help Please! by Lanwench

Lanwench
Fri Sep 23 12:10:57 CDT 2005



In news:OVQ8Be6vFHA.3556@TK2MSFTNGP12.phx.gbl,
Wolarus <wolarus@word-of-life.net> typed:
> -----------------------------------------------------------------------------------------------
> CROSS POSTED to MICROSOFT.PUBLICWINDOWS.SERVER.SBS

Nope - multiposted. I replied in the SBS group....

If you need to post to multiple groups, it's best to crosspost instead, by
posting a single message to a handful of relevant groups (separate the NG
names with commas) so that everyone can follow the thread. Thanks :-)

See http://www.blakjak.demon.co.uk/mul_crss.htm

<snip>