Check to see if SQL table has been updated by another user
Hi...
What's the quickest and simplest way to check if a row has been changed (by
another user) on a remote SQL table?
Obviously TABLEUPDATE returns .F. if it encounters and error but it would be
better to 'test' the condition before even attempting to perform the update.
Any help would be much appreciated. Tag: Fox Programmer .... Need Jobs Tag: 231364
buffering
select 0
use tablea shared
select tablea
cursorsetprop("buffering",4)
set filter to type="A"
select
use tablea again shared alias tableb
set filter to type="B"
* 1. is the following necessary?
select tableb
cursorsetprop("buffering",4)
...
... show form to edit these values ...
...
* 2. if I tableupdate() tablea,
* will tableb be tableupdated() as well?
3. Any other things I need to remember?
--
iTech Consulting Services Limited
Expert of ePOS solutions
Website: http://www.itech.com.hk (IE only)
Tel: (852)2325 3883 Fax: (852)2325 8288 Tag: Fox Programmer .... Need Jobs Tag: 231355
help, cash denomination....
hi experts,
anybody can give me some example that of cash denomination, like for example,
the given is 1525.75 and the output would be....
1000 - 1
500 - 1
100 - 0
50 - 1
20 - 1
5 - 1
.50 - 1
.25 - 1
thanks in advance.... Tag: Fox Programmer .... Need Jobs Tag: 231353
Vista and Elevation
Hello all!
I have been working for 2 days trying to figure out how to change my
application (written in VFP9) to work with Vista. The first objective is
writting to the registry. The way our application works... the first time
you launch it, it asks for a Code. The user enters this code and the
program saves it to the registry under HKEY_LOCAL_MACHINE.
This works great under XP. This way if they change users or they are
running terminal server, they all find this entry in the same location.
In order to write to the HKEY_LOCAL_MACHINE on Vista, you must be elevated
to Administrative level. I have read several articles on how to achieve
this, but the common belief is to create a separate program that can be run
from your main program. This new "separate" program should be setup to
require administrative rights using a manifest file. Now the trick I
needed to pull off was to be able to call this program and wait for it to
close. I tried a few solutions... but the one that seemed to work best for
me was to create a third program. This third program will be a COM Object
accessable by Foxpro, with the sole purpose of running the "separate"
program mentioned above and wait for it to close. I call the COM Object
from VFP and it stops the VFP programs execution until the separate program
is closed. Perfect!
It seems like I found the answer.. but because I knew it had to be too good
to be true I decided to test a little. I created two shortcuts on my Vista
desktop. Both shortcuts run Foxpro 9, but one is flagged as "Run as
Administrator" and labeled "Admin". The other shortcut runs as Standard
User is titled "Standard". When I run the Standard VFP shortcut and
execute the Com Object, everything is perfect. Life if great! Now I
tried to run the VFP shortcut "Admin" and access the COM Object. Here is
where the problem is.....
Class definition x.y is not found
Help! I don't know what to do next. When I run the "Admin" shortcut,
Vista prompts be to "Allow / Cancel". It is elevating my instance of VFP to
Admin level. But when I attempt to execute the COM Object it cannot find
the class definition.
Any ideas on how to get around this "little" problem? How is everyone
else handling this?
Thanks
Dan Tallent Tag: Fox Programmer .... Need Jobs Tag: 231330
Gefile on terminal server
Hi,
a client reports following situation with our Application (built on
VFP9SP1):
Every dialogue, where we use the putfile or the getfile function, does
not appear. They had to delete the local profiles of the user on the
server, because there were problems in the encryption module, and
after that, the getfile() - function does not show the input form. the
command is totally ignored...
How can I make the dialogue appear?
Thank you!
Bastien Tag: Fox Programmer .... Need Jobs Tag: 231316
Winsock and ip address changes
Hi and thanks in advance for the help.
This isn't strictly a Fox question but since I develop in Fox I thought I'd
see if any of you have any ideas about this.
I use the MS WinSock control. One of the properties is LocalIP which should
be your machine's IP address. It is set by the control and not changeable in
code. My application stopped working and I was looking at the LocalIP
property.
It said 0.1.4.0 instead of 192.168.0.33 which is my correct ip address
(fixed, no dhcp involved)
Once I rebooted, the LocalIP went back to 192.168.0.33
I'm curious as to how it got changed. Did I have some poorly behaved
software? Did my machine need a re-boot and the funny IP Address was a
symptom? Is something more evil going on?
If anybody knows anything about this please tell me.
Thanks,
Jeff Tag: Fox Programmer .... Need Jobs Tag: 231310
Upgrade from VFP 6 to 9 - RUN command fails
I have the RUN command in a long-standing app that I am now running
under VFP 9 for the first time, but even from the command window, a
simple
RUN cmd
or
RUN command
both fail.
I'd appreciate suggestions on what to look into next. The RUN command
is an integral part of this application and we need it to work. If I do
a
DIR <batchfilename>
from within VFP 9, the file is there, and I can edit it from a cmd
window (which I just did) and save my changes, and I also just ran it
from a cmd window, but this is a cmd window opened by the operating
system (me clicking on the shortcut on my desktop labeled "dos box") and
not from within VFP 9.
Thanks in advance.
-S- Tag: Fox Programmer .... Need Jobs Tag: 231308
Problem with VFP9 report
In group footer we have:
in 1st line - field object with Fix relative to top option
in 2nd line - field object attached to memo field in table with Fix relative
to top and Stretch with overflow options
in 3rd line - field object with Float option
in 4th line - field object with Float option
If memo field has up to 20 lines everything is ok, but if memo filed is
longer than 20 lines footer continues on next page but it does not print 3rd
and 4th line.
Thanks in advance Tag: Fox Programmer .... Need Jobs Tag: 231298
List of all Foxpro base properties?
I am trying to write a program to document the custom classes I made.
How could I obtain a full list of base property names of all base
classes, so that I could auto-magically know the property is a custom
one or a base one?
--
iTech Consulting Services Limited
Expert of ePOS solutions
Website: http://www.itech.com.hk (IE only)
Tel: (852)2325 3883 Fax: (852)2325 8288 Tag: Fox Programmer .... Need Jobs Tag: 231293
Patches for VFP 9.0
I just installed VFP 9. On this page:
http://msdn2.microsoft.com/en-us/vfoxpro/bb190232.aspx
The first item is SP1, and the second item says what's in it is already
in SP1.
What about the remaining items on the page - do I want/need them?
XSource
FFC
VFPCOM Utility
There is a brief explanation of each on the web page but I'm afraid it's
a little too brief for me.
TIA.
-S- Tag: Fox Programmer .... Need Jobs Tag: 231291
Delete query
Can someone tell me why the following does not work?
I have two tables, cps and complete. I need to delete all the records in
cps that match the records in complete. Here's my query:
DELETE FROM cps.DBF WHERE Cps.invoice = Complete.invoice
When I run that above Foxpro tells me that 0 records were deleted. Any help
would be greatly appriciated.
Jim Tag: Fox Programmer .... Need Jobs Tag: 231286
Sending report to file
I have a large VFP application I inherited. There is a function I
made to create a PDF from a report and email the PDF file.
I send the output to a file using the command
REPORT FORM MyReport NOCONSOLE TO FILE MyResultFile.ps
I then use GhostScript to create a PDF. Everything works fine the
FIRST time, but the next time I run the REPORT FORM command, the
output is sent to the default printer and not a file. In trying to
find the problem, I have used DISPLAY MEMORY TO FILE both times to
compare the contents of memory. I have done the same with DISPLAY
STATUS. I do not see any glaring differences that would prevent the
output to a file the second time around. If I exit the application
and reenter each time, the report is sent to a file successfully. It
only fails if I _don't_ exit the application and it only fails after
the first run. I have verified the printer is being set correctly and
the SET('PRINTER', 3) is the printer with the postscript driver.
This definitely seems like a bug in VFP since a file is not created
and the REPORT FORM command should produce a file because of the "TO
FILE".
Any ideas? Tag: Fox Programmer .... Need Jobs Tag: 231285
Question: Is VFP a Developing tool or a Database ?
If you believe so, please take a look at the following link which is there
since 2004:
http://www.microsoft.com/usability/enrollment.htm
Demetrios, Greece Tag: Fox Programmer .... Need Jobs Tag: 231278
VFP9: Weird Event Issue
A central part of my app is the Invoicing Wizard. It gives the
operator a display of Work Orders and the opportunity to select one
for invoicing. Because of the nature of the business, there are many
things to check before invoicing, so the form has thirty-two buttons.
While this might seem to be a good entry for the Interface Hall of
Shame, it does work rather well. (Yes, I have used the app as well as
having written it.)
There is a peculiar behaviour that I noted when working on a
related matter.
Each Work Order listed has a textbox next to its details. Putting
a "Y" in it selects the Work Order for invoicing. The textbox has
input validation for whether it will allow the Work Order to be
selected for invoicing. Among the things that is checked is the Work
Order Type. If it is "E", then a messagebox asks whether this is what
was really intended and should the system change the type to "F". If
yes is chosen, the Work Order is updated and so is the display. If
not, the Work Order is not selected.
If "Y" is entered into the textbox, focus is moved off it (say,
with <Tab>), and then the "Generate Invoice" button is clicked,
invoicing will start.
However, if "Y" is entered into the textbox, but focus is not
first moved off the textbox before clicking "Generate Invoice", when
the Work Order Type is "E", the messagebox will appear, a yes response
will result in the Work Order and the display being updated, BUT
invoice generation will not start. The focus will be on the Generate
Invoice button, but the button's click will not get executed.
My question is why does the button's click not get executed.
Sincerely,
Gene Wirchenko
Computerese Irregular Verb Conjugation:
I have preferences.
You have biases.
He/She has prejudices. Tag: Fox Programmer .... Need Jobs Tag: 231262
SQL query problem with character comparison.
Hi,
I have a problem in Foxpro. We have a query like
Select * from Account, Bank where alltrim(account.bank_id) =
alltrim(bank_bank_id) and alltrim(account.Bac) = alltrim(Bank.Bac) and
alltrim(Bank.Bac) = '0000991' and not Deleted()
Bank table has a column Bac which is type Charater(7). The application
always inserts 7 charactes in this column. Eg. for 71 it will insert
0000071. But i have some records in the table which are marked deleted
and they have bac column as 0001 i.e is less than 7 characters.
The problem is above query does not return a result set even though
there are records present.
Moreover if i pack the table Bac, the query works fine.
I also tried changing the query to Bank.Bac = '0000144'. Initially it
worked fine and returned me 400 records. Then i zapped 300 records
from account and executed the query. this time it agan gave me no
records. By some trial and error i found that the modified query
worked if there were more than 170 records. For any less it gave blank
recordset.
I want to find out the reason for such weird behaviour and if this
some Foxpro limitation
Please reply.
Thank you Tag: Fox Programmer .... Need Jobs Tag: 231250
Mulitiselect records on the Grid
hi expert,
how can i multiselect records on the grid.
can you give me some example code
thanks....
gechelle Tag: Fox Programmer .... Need Jobs Tag: 231243
focus.fll and vfp9
I used focus.fll in my vfp7 application, and there are hundreds of users out
there. I used 2 functions (fil_encrypt and fil_decrypt) to encrypt and
decrypt personal information. (I also used fil_open and fil_create but
haven't started to worry about these yet).
I am in the process of moving this application to vfp9 and of course
focus.fll is no more.
My dilemma is how to enable users to transfer their data. I don't really
want to have to supply a separate vfp7 exe with runtimes to convert the
data, but can't get a response from fastwrite.com about purchasing the
source code for these functions.
Does anybody have any help or advice to offer?
Sincerely
Stephen Ibbs Tag: Fox Programmer .... Need Jobs Tag: 231232
Foxpro 2.6a windows Install disks
Anyone know how I can get access to install disks for this program?
Does anyone that no longer needs their copy be willing to sell it off
to me? Tag: Fox Programmer .... Need Jobs Tag: 231224
No more Foxpro
Would Micro$oft open the source codes of VFP since it's only Micro$oft
that has no interest in it.....
--
.~. Might, Courage, Vision, SINCERITY. http://www.linux-sxs.org
/ v \ Simplicity is Beauty! May the Force and Farce be with you!
/( _ )\ (Ubuntu 6.10) Linux 2.6.20.3
^ ^ 20:18:01 up 1 day 6:36 0 users load average: 1.00 1.00 1.00
news://news.3home.net news://news.hkpcug.org news://news.newsgroup.com.hk Tag: Fox Programmer .... Need Jobs Tag: 231222
How to APPEND FROM XLS for Cell with formula?
Good day everybody,
I am using VFP8.0 and Excel 2002.
I have been using VFP program to use APPEND FROM to read Excel file and fill
my DBF with data. So far I have no problem with that.
However due to end-user request to minimize data entry work, I replace one
of the Excel column with formula VLOOKUP to get some data from Excel table in
the same workbook. Now I couldn't get the result upload into DBF file. I get
a black box and first letter of the result only.
I will appreciate if some one can guide me to solve the problem.
Thanks in advance and hope to hear from you.
Best regards,
Julie Tag: Fox Programmer .... Need Jobs Tag: 231218
Variable declaration doubt
why and what is the benefit of following code
local oSomething as "SomeServer"
over the following code
local oSomething
since following code works even without declaring the variable.
oSomething = NEWOBJECT("SomeServer")
thanks! Tag: Fox Programmer .... Need Jobs Tag: 231212
How to "select ..." on SQL Server 2000, Thnaks!
Dear All,
How to "select ... " on SQL Server 2000, Thanks!
Q1: "select recno() as yrecno, * from tablename into cursor xx order by 1"
Thanks! Tag: Fox Programmer .... Need Jobs Tag: 231199
Grids
In VFP6. Can you create a grid programmatically ?
I can create a window on the fly and activate it, but would also like to
put a grid into it with selected characteristics
Thanks..
--
Tim Hobson Tag: Fox Programmer .... Need Jobs Tag: 231190
Docking Windows
Hi,
When docking a window on the side and another on the bottom, the
bottom window will always push the side window up. It seems when
docking on the top or bottom, those windows will always dock full
screen width. Is there anyway to change this so the windows docked on
the side will show full screen height?
Thanks
Dave Tag: Fox Programmer .... Need Jobs Tag: 231185
sql question
reference name continue
1 apple 1
2 apple 2
3 apple 3
4 boy 1
5 boy 2
6 cat 1
7 cat 2
8 cat 3
9 cat 4
10 cat 5
11 apple 1
12 apple 2
13 boy 1
How to produce "continue" from the first 2 columns?
--
.~. Might, Courage, Vision, SINCERITY. http://www.linux-sxs.org
/ v \ Simplicity is Beauty! May the Force and Farce be with you!
/( _ )\ (Ubuntu 6.10) Linux 2.6.20.3
^ ^ 15:22:01 up 1:40 0 users load average: 1.00 1.01 1.01
news://news.3home.net news://news.hkpcug.org news://news.newsgroup.com.hk Tag: Fox Programmer .... Need Jobs Tag: 231177
No VFP
At the risk of seeming utterly self-concerned, I was wondering what
the easiest path might be for VFP programmers. I don't think I can in
good conscience start a new project in VFP. Does anyone know what
languages and developer interfaces are similar? I hope Microsoft
gives us some guidance. It seems as though they should drop Access
and keep VFP.
I started with dBase II, went on to DBXL, then finally Fox. This
whole thing is very sad news because I love Fox.
I'd love to hear from others.
Monique. Tag: Fox Programmer .... Need Jobs Tag: 231171
Problem with activeX under VFP9.
Hi All:
We've been using an activex control ("bblistview.ocx") for seven years under
VFP6 without problems. But now we want to update our application to VFP9 so
when we run our app under VFP9 IDE, that control runs correctly, but when it
runs in EXE it fires an error:
Error 1429 ... Exception code OLE lDispatch 0 of BBLIST~1: Invalid Index
Value.
And control doesn't run properly.
Any idea or advice about this problem, please.
We use that control a lot of times in our app, and if we can't run it, we
can't update to VFP9.
Thanks in advance.
Rosana. Tag: Fox Programmer .... Need Jobs Tag: 231148
Loadpicture
Hi all,
in an ICO file, we have are multiple Icons saved with different color
depths and sizes... We want to create an ICO Object for loading the
data into a treeview from that. In VB, there is a loadpicture function
with parameters for size and color depth, and the system reads the
right Icon from the file. How do I do this in VFP?
Thank you for your answer.
Bastien Tag: Fox Programmer .... Need Jobs Tag: 231144
PageFrame behavior
Why closing a form with pageframe without any changes will prompt for saving
changes ?
is only certain form or all form with pageframe having this same behavior ?
why ? Tag: Fox Programmer .... Need Jobs Tag: 231141
VFP9: Setting Printer Orientation Multiple Times
I thought I had it all worked out. I did some final checking,
and found that I do not have it all after all.
A minor point: it turns out that the report should have its tag
and tag2 columns emptied as well.
More importantly, I find that I can not change the orientation in
the middle of a report. I can kludge this on hardcopy by replacing my
eject commands with close printer (and hope the pages print in order),
but this does not work with PDF output as it ends the report. I only
need to be able to do this for entire pages.
The sys(1037,3) also appears to have no effect ever on PDF
output.
The sys(1037,3) documentation says nothing about the settings
being for the entire printjob, but that is the way that it appears to
work.
Unless I missed something. If you know, what?
Sincerely,
Gene Wirchenko
Computerese Irregular Verb Conjugation:
I have preferences.
You have biases.
He/She has prejudices. Tag: Fox Programmer .... Need Jobs Tag: 231126
Presents without inviting
Hi Seniors
I hope ur fine
In vfp 6.0 whenever i open the form by "modi form form1" ,
toolbox and property windows presents by default ,
how to avoid this.
Paul Tag: Fox Programmer .... Need Jobs Tag: 231119
Timers and resources
Hello and thanks for the help.
Does anyone know (or have a good guess) about the resources used by a timer
control?
If I have a window with a timer control set to 60000 (every minute), how
many of these windows would have to be open before the performance is a
problem?
Thanks,
Jeff Tag: Fox Programmer .... Need Jobs Tag: 231115
ObjectForScripting?
I want to communicate back from a html document which I run in a browser
control in a VFP 9 form. In C# this is done by setting the property
ObjectForScripting to the form object (). After this the htm page can run
functions in the C# code.
The ObjectForScripting property is lacking in the webbrowser control in
VFP9. Any ideas how to do this? Basically what I want to do is to send back
data to the calling ole control.
Any help would be appreciated. Tag: Fox Programmer .... Need Jobs Tag: 231109
registering ocx's under vista
My vfp app uses msmapi32.ocx and mscomctl.ocx
When loading it on to vista business (logged in as administrator)
I get and error message code 0x8002801c and a message to lookit this code up
on mskb
this tells me that I have to rewrite the dll using categories (these are ms
ocx's)
where do I go from here?
Any help appreciated
John Davy Tag: Fox Programmer .... Need Jobs Tag: 231100
Command Button
In VFP6 and VFP7 there is no backcolor property in the CommandButton. Is
there any way to change the background color. Tag: Fox Programmer .... Need Jobs Tag: 231095
No VFP 10
Too early to be a aprils-fool.
http://msdn2.microsoft.com/en-us/vfoxpro/bb264582.aspx
Carsten
_______________________________ Tag: Fox Programmer .... Need Jobs Tag: 231092
VFP 9: Setting Printer Orientation Outside of Reports
Some of you may recall my posts asking for how to set the printer
orientation without using sys(1037). sys(1037) displays a form and
though you can use keyboard to set it, it can fail if the user
switches to another window.
I do not use the report writer. I have many reports written with
set printer on / ?.
Here is how to do it without the sys(1037) form showing up.
For as many settings sets as you want, do the following:
Create a report. (I will use the name "setting".) It can have
anything it in it. One label will do, just enough that it is saved
when you exit.
use setting.frx exclusive
browse
Find the row with objcode of 53. (It has been the first in all
cases that I have seen.) Edit the memo expr. Enter whatever setting
you want, one per line. For orientation, put in a line
ORIENTATION=n
where n=0 for portrait or n=1 for landscape. Delete the other lines
(unless you want those settings). Save out of the memo.
Delete the rest of the rows. Save out of the browse.
pack
use
Save the modified report somewhere, both the .frx and the .frt.
When you use the report, it will get changed, so making a run copy is
the way to go. Use setorient below to set the orientation, adjusting
for naming conventions.
********** Start of Code **********
* setorient
* Set Printer Orientation
* Last Modification: 2007-03-13
procedure setorient && base
lparameters;
orient && = L: .t.=set to portrait, .f.=set to landscape
if orient
copy file cprnport.frx to cprnuse.frx
copy file cprnport.frt to cprnuse.frt
else
copy file cprnland.frx to cprnuse.frx
copy file cprnland.frt to cprnuse.frt
endif
local savealias
savealias=select(0)
select 0
use cprnuse.frx exclusive
=sys(1037,3)
use
erase cprnuse.frx
erase cprnuse.frt
select (savealias)
return
endproc
********** End of Code **********
Caveats:
1) I have not tried to change the orientation in midpage.
2) sys(1037,3) is documented as working on the *default* printer, but
I think this should be the *current* printer. You can set the current
printer with
set printer to name "<printer name>"
3) I have not experimented with code sequences. I simply got
something to work. What I use is:
set printer to name . . .
setorient . . .
set printer on
output
set printer off
setorient(.t.)
close printer
Sincerely,
Gene Wirchenko
Computerese Irregular Verb Conjugation:
I have preferences.
You have biases.
He/She has prejudices. Tag: Fox Programmer .... Need Jobs Tag: 231091
PDF to JPG
Anyone have a routine to convert a PDF file to a JPG file? I need it for a
commercial application so it needs to be something that can be distributed
royalty free.
Thanks
Charlie Parker Tag: Fox Programmer .... Need Jobs Tag: 231089
Multithreading in VFP 8 and 9
Hi:
Just want to share another multithreading Demo with sources.
It's based on Calvin Hsia's excellent work that posted in his blog at:
http://blogs.msdn.com/calvin_hsia/archive/2006/05/23/605465.aspx
I've just added the callback part and few methods and encapsulated all
in 2 prg's to make it reusable.
The demo is compiled in VFP 9 and you can found it in www.portalfox.com,
at this link:
http://www.portalfox.com/articulos/archivos/bozzo/Test_Threads.zip
The demo is a simple form with 3 buttons wich do some work in it own
thread, and then bring back the results to display them. Have a
checkbox for testint the same methods in multithreaded and not
multithreaded mode.
To use in VFP 8 just need to recompile the proyects and the MT DLL
(t1.dll)
I think that copying and adapting the VFP 8 conditional code and using
the VFPCOM component available freely from Microsoft it would be
compatible with VFP 6 and 7 too.
Regards,
Fernando D. Bozzo Tag: Fox Programmer .... Need Jobs Tag: 231086
VFP 9: Odd Toolbar Behaviour
I have a form in my app implemented as a toolbar. It formerly
contained one editbox, two pushbuttons, a label, and some separators.
Note that there was one control that could accept text input. It
worked fine.
Now, I need two textboxes. I have added more labels and
separators, too. Everything is almost working.
The problem is focus, except that since toolbar objects do not
get focus, I have to call it something else. <G> Let us call it
"cursoring".
I cursor to the editbox. I cursor to the first textbox. I can
not then cursor to the editbox. I cursor to the second textbox. I
can not then cursor to the other two controls. IOW, I can cursor
forwards (in the order of instantiation), but I can not cursor
backwards.
By not being to cursor, I mean that if I move the mouse pointer
to the control that I want to cursor to and click, the cursor shows
there as long as the mouse button is down. As soon as I release it,
the cursor goes back to the toolbar control that it was at.
I changed the order of instantiation to put the editbox after the
two textboxes and to put it in between. The same behaviour resulted:
I can cursor forwards (by instantiation order), but not backwards.
If I click on another textbox not in the toolbar, I can then
cursor to any of the three controls, but subsequently, I can not
cursor backwards.
What exactly is going on here? What can I do about it?
I am using a toolbar because it is non-modal. It would be a
violent change to make my forms non-modal. I can not make the toolbar
a non-modal form, because VFP will ignore the setting if I have modal
forms up. (At least, this was so in VFP 6.)
Sincerely,
Gene Wirchenko
Computerese Irregular Verb Conjugation:
I have preferences.
You have biases.
He/She has prejudices. Tag: Fox Programmer .... Need Jobs Tag: 231083
mouseleave doesn't always fire
Hello and thanks in advance for the help....
Does anyone know why MouseLeave doesn't always fire?
Here is what I did...
I created a form to which I added a container.
In the MouseEnter Method I coded:
this.BackColor = 8454016 && Green
In the MouseLeave Method I coded:
this.BackColor = 255 && Red
Then I ran the form.
If you move the mouse slowly, it does exactly what you would expect. It
turns green when you enter and red when you leave.
But if you move the mouse quickly you can get it to miss the MouseLeave
event.
Does anyone know if there is anything that can be done about this (short of
tell my users to move the mouse slowly)?
Thanks,
Jeff Tag: Fox Programmer .... Need Jobs Tag: 231081
Drag Drop Confusion
Thanks in advance for the help...
suppose you create a window with no title bar but you want to include a
control on that window that can be used for moving the window on the
desktop.
Could someone explain what code goes in what method of the control or the
window?
The code in solution.app is very confusing and not commented.
Thanks again,
Jeff Tag: Fox Programmer .... Need Jobs Tag: 231071
Saving Docked form position
I am trying to restore the docked position and size of my forms so I can
restore them when the program is restarted. I have been trying to use the
GetDockState function to get the current dock status of my form and then
writing that data to the registry. I can get the data written to the
regristry but when I try to read the values back out and restore my forms I
do not get the desired results.
Does anybody know of any class out there that will do this for me?
Thanks. Tag: Fox Programmer .... Need Jobs Tag: 231069
Application Lost Focus
Thanks in advance for the help.
I have an app that creates windows. I need to know when the windows lose
focus. That is easy enough if a window loses focus to another window in the
application but I also need to know if the window loses focus to another
application entirely.
I've noticed that losefocus only gets called when a window loses focus to
another window in the app.
Is there a way to detect when the app. itself has lost focus?
I would prefer to do this in the window that had focus at the time the app
lost focus but if I have to do it at the application level, that's ok too.
Thanks again for the help.
Jeff Tag: Fox Programmer .... Need Jobs Tag: 231061
Sir,
My name is Tommy from Thailand.
With my Visual FoxPro experience more than 6 years.
I need more jobs. Who have jobs for me, feel free to contact me
anytime
Thanks