CCR Clustering

I have a question regarding the Public/Private IP setup for the CCR. They
say that you have to setup both a Private and Public IP adapter on each node.
Does that mean that I have to setup another VLAN on each network for this
Private network? There is a different setup on 2008 than 2003 and Iâ??m
confused as to how it should work. Also, during the CCR setup, you have to
assign an IP address to the Cluster. Is this a public address? If so, how
do I decipher which subnet it belongs in? Obviously the nodes will be in
different subnets as the will be in completely different geographical
locations. Thx Rafavic

Bob
Fri May 09 08:29:41 CDT 2008

Try asking the folks in a network related group instead of here. This=20
group is for questions about using Excel spreadsheets.

Rafavic wrote:

> I have a question regarding the Public/Private IP setup for the CCR. T=
hey=20
> say that you have to setup both a Private and Public IP adapter on each=
node.=20
> Does that mean that I have to setup another VLAN on each network for t=
his=20
> Private network? There is a different setup on 2008 than 2003 and I=E2=
=80=99m=20
> confused as to how it should work. Also, during the CCR setup, you hav=
e to=20
> assign an IP address to the Cluster. Is this a public address? If so,=
how=20
> do I decipher which subnet it belongs in? Obviously the nodes will be =
in=20
> different subnets as the will be in completely different geographical=20
> locations. Thx Rafavic

Rafavic
Fri May 09 08:40:02 CDT 2008

Thanks Bob I posted this in the wrong section and reposted

"Bob I" wrote:

> Try asking the folks in a network related group instead of here. This
> group is for questions about using Excel spreadsheets.
>
> Rafavic wrote:
>
> > I have a question regarding the Public/Private IP setup for the CCR. They
> > say that you have to setup both a Private and Public IP adapter on each node.
> > Does that mean that I have to setup another VLAN on each network for this
> > Private network? There is a different setup on 2008 than 2003 and I�m
> > confused as to how it should work. Also, during the CCR setup, you have to
> > assign an IP address to the Cluster. Is this a public address? If so, how
> > do I decipher which subnet it belongs in? Obviously the nodes will be in
> > different subnets as the will be in completely different geographical
> > locations. Thx Rafavic
>
>

Bob
Fri May 09 08:45:20 CDT 2008

You're welcome, no problem.

Rafavic wrote:

> Thanks Bob I posted this in the wrong section and reposted
>=20
> "Bob I" wrote:
>=20
>=20
>>Try asking the folks in a network related group instead of here. This=20
>>group is for questions about using Excel spreadsheets.
>>
>>Rafavic wrote:
>>
>>
>>>I have a question regarding the Public/Private IP setup for the CCR. =
They=20
>>>say that you have to setup both a Private and Public IP adapter on eac=
h node.=20
>>> Does that mean that I have to setup another VLAN on each network for =
this=20
>>>Private network? There is a different setup on 2008 than 2003 and I=C3=
=A2=E2=82=AC=E2=84=A2m=20
>>>confused as to how it should work. Also, during the CCR setup, you ha=
ve to=20
>>>assign an IP address to the Cluster. Is this a public address? If so=
, how=20
>>>do I decipher which subnet it belongs in? Obviously the nodes will be=
in=20
>>>different subnets as the will be in completely different geographical =

>>>locations. Thx Rafavic
>>
>>