How to make Serenum sit on the top of virtual serial port driver?

TheMSsForum.com: The Microsoft Software Forum

The MSS Forum ‹ Drivers
- Archive
  - Biz
  - MCSE
  - CRM
  - Drivers
  - Framework
  - ADO
  - ASP
  - Compact
  - Forms
  - Dotnet
  - C#
  - VB
  - FontpageGen
  - Excel
  - WorkSheet
  - Exchange
  - Setup
  - Fox
  - Fontpage
  - ASP
  - IIS
  - Entourage
  - Money
  - Messanger
  - PocketPC
  - Powerpoint
  - Project
  - Publisher
  - Excel
  - VB
  - Security
  - Portal
  - Services
  - SQLServerDev
  - SVCS
  - SQLServer
  - VB
  - VC
  - MFC
  - ExcelGen

- Previous
  - 1
    - How to create a driver using only WinDDK Hello, I am looking for a procedure or an example to create a driver using only WinDDK ? Thank you for advance. Sincerely yours. Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34453
  - 2
    - Error during install I want to install the sample toastmon from XP DDK. In the corresponding inf file toastmon.inf are the entries Class=Sample ClassGUID={78A1C341-4539-11d3-B88D-00C04FAD5171} Class sample isn't an existing setup interface class. How shall I proceed? Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34452
  - 3
    - device reenumeration returns overlapped I/O operation in progress I used devcon way to "Scan for Hardware changes". On some XP(SP1) systems, CM_Reenumerate_DevNode_Ex returns randomly "Overlapped I/O operation in progress" In the same time I can trigger a "Scan for Hardware changes" from Computer Management without any problems. Thanks in advance, Daniel Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34451
  - 4
    - How to install genprint.dll?? Hi~, I'm newbie in ms-windows and VC programming. :) I should develop NT service program that prohibit user's printing any documents. I tested SetPrinter() and I found a problem. Using SetPrinter() can't control network printer that attached in other machine. ('Access denied' error is displayed when calling OpenPrinter() using DesiredAccess set to PRINTER_ALL_ACCESS) So I should find another method. I want to block all printers installed in local machine(local printer and network printer). But for the network shared printer, another computer should can print using this network shared printer. (Only a computer that my program is installed should be influenced by my program) Q.1 Can I hook printing event or job or print spooler? (I think GetJob() also can't filter user's printing job...) I posted this question to many newsgroups or forums but I didn't get suitable answer(may be impossible??...) Now, I'm testing Customized Print Processor using genprint.dll from ddk. I built and copy it to C:\WINNT\system32\spool\drivers\w32x86. And I made its installation program. int main() { ... nResult = GetPrintProcessorDirectory(...,processorPath,...); _tcscat(processorPath, _T("\\genprint.dll")); nResult = AddPrintProcessor( NULL, // server name NULL, // environment name processorPath,//processorPath, // path "My Processor" // ----> what string should I use?? ); } It returns error string("The specified module could not be found."). Q.2 Which string should I use in pPrintProcessorName field? and processorPath string(C:\WINNT\system32\spool\drivers\w32x86\genprint.dll) is right? Q.3 If I success AddPrintProcessor(), how can I change Print Processor to "My Processor" from "WinPrint" of existing printer? Q.4 I can't change Print Processor property of network printer manually(Print Processor button is disabled). That means, using customized print processor also can't control printing network printer? Thanks in advance. And I hope you can understand my poor english :) Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34450
  - 5
    - PCI sample driver for 2K Hi, Is there any place where I can find a sample PCI device driver for Windows 2000. Or can anybody mail me the skeletal driver of the PCI driver. I am a newbie and have to write a device driver for a PCI based device on win 2k. Can anyone tell me if it is possible to have 2 drivers loaded for the same device? One more question... Can a user application directly talk to this PCI device without any device driver in between? Somebody was saying something about IOCTLs... Is that the right lead? Please help! CSK Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34447
  - 6
    - handling multiple interrupts?? hello sir, am working on developing wdm driver for a cpci carrier board.four independent I/O modules can be mounted on a carrier.so in a memory map there are four seperate memory space for each i/o module. usually in a application i call createevent & send it to driver inturn driver calls ObReferenceObjectByHandle - Registers Event in kernal mode. on interrupt driver calls KeSetEvent to notify the app the event. there is a single driver & four different applications comunicating with driver. now the question is how do i handle interrupts?? should each application call create event & send to driver? & how driver notify the different applications correctly when multiple interrupts are generated?? how to hold each application handle & notify to it? Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34446
  - 7
    - How to define the USB vendor specific command in Language monitor Hello, I'm trying to use IOCTL_USBPRINT_VENDOR_GET_COMMAND and IOCTL_USBPRINT_VENDOR_SET_COMMAND to communicate with UsbPrint in my language monitor but I have no idea how I can set and read the internal irp packet (Irp->AssociatedIrp.SystemBuffer...) Is there any way to use these command in GetPrinterDataFromPort function of language monitor that call Port monitor's GetPrinterDataFromPort with parameters (inbuffer,inbufferSize, outbuffer, outbufferSize).. Can I just assume that inbuffer/outBuffer as Irp's Systembuffer? Thanks Jeth Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34437
  - 8
    - network connection properties Hello, I would like to add a panel to the Network Connection Properties (in addition to General, Advanced, etc). Is there an example of how to do this? Thanks, David Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34433
  - 9
    - Video Card Drivers - Signed Drivers -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello,c 1. Is there any place where I can find out (before purchasing) whether or not a Video Card vendor uses signed drivers? 2. Is there some way I can determine this from examining updated drivers---without actually having the hardware to attempt an installation? This information seems to be lacking from catalog entries and from the specifications on the packaging. Background: I have a Creative GeForce2 Blaster 2 video card. It is about 2 years old. I am running Windows 2000 with all patches. I like to set Windows to reject attempts to install an unsigned driver. I consider this to be a nice, simple step to increase security. Unfortunately, I cannot do this because of my video card. Thanks, - -G -----BEGIN PGP SIGNATURE----- Version: PGP 8.0.2 iQA/AwUBP5Wsz5na0kUWp81LEQJV/gCcD2lUEmUMAF2QEARzRcVJ1jNxVcEAoP3J K0B3d+k9apo9cNh2R5WPIBDK =B7eo -----END PGP SIGNATURE----- Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34428
  - 10
    - binding intermediate to specific miniport Hello, I am using the MUX intermediate driver example in the DDK source. I would like to make sure that it only binds to the specific miniport driver (not just via the NDIS_MEDIUM selection). Is it possible? Do I have to use the notify object to do this? Thanks, David Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34425
  - 11
    - document on LSP Sample from microsoft Hi All- I've downloaded Microsoft SDK, which I'm interested on the LSP sample code. do you know if there is a documentation analyzing the sample code? Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34419
  - 12
    - IPSec Offload capable Gigabit NIC's Does anyone know of any vendor out there selling Gibabit NIC's capable of offloading IPSec. Thanks Tim Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34417
  - 13
    - Device Code I am wondering how I match up a PCI Base Class code with a INF file class. I have a device that has an Base Class 07 and Subclass 80, a Simple Communications Controller, other communications device. I wrote a driver that works with it, but I get a new device detected message every time Windows boots up. What entry do I need in my INF file to tell Windows this is the driver for that device? I am using Windows 2000. Thanks, Clint Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34415
  - 14
    - USB block size I encountered in my Language Monitor a major difference in data handling when I use a parallel port vs . a USB port to print to my printer. The parallel IO is transferring data in blocks of 64K and the USB has only a block size of 4K. This caused some unexpected behavior at the end of a print job so I am looking for a way to change the block size for the USB port to reflect the same size as the parallel. Does anybody know if I can change the block size when opening the port in the Language Monitor? What about the write and read timeouts, can they be changed down in the Language Monitor as well or is this to be done in an application? Help with these questions is much appreciated. /Manfred Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34409
  - 15
    - Get network adapter disable/enable status thru wmi Hi All, Is it possible to determine thru WMI whether a network interface is either enabled or disabled. Devcon sample in winddk displays this status but i would like to know if the same can be obtained from WMI. "Win32_NetworkAdapter" class has two attributes string Status; uint16 StatusInfo; when i see these values for network interface thru wbemtest.exe values are null. According to the description of "StatusInfo" this should be able to give me enabled or disabled status. Is there any other way thru WMI to detect enabled/disable status. Thanxs & Regards, Vijay Chegu PS: Plz note i dont want network connection status, i want enable/disable status which can be altered in "network and dialup connections" window through right click. //vijaycheguwmienabledisable Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34405
  - 16
    - read Flashdisc on Windows PC (newbie) I have a USB FlashReader from Quatech, PCD-U, which supports a 16Mb PCMCIA PC Card from SanDisk. The cards that I need to read have NOT been written as files on discs, but in what I suppose to be a "regular memory format". The software from Quatech seems to only support "disc formatted" PC cards, although I am by no means sure of that. I am running on a Windows XP machine and am also the proud possessor of a MSDN Universal subscription that seems to include everything from Microsoft that I would ever need. My question is - what do I do next? I cannot seem to find any examples or sample code for reading a flash memory card via USB with whatever handler/driver combo is necessary. Any pointers would be greatly appreciated. TIA Bill Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34404
  - 17
    - ksproxy plugin design issues I am considering design choices about controlling custom aspects of a USB2 camera. This camera driver is based on usbcamd2 and is currently proxied by ksproxy. The intent is to create ksproxy plug-ins to result in the following: 1) 1 or more property pages such that amcap, graphedit or the like can set these custom properties and 2) A way to programmatically set these same properties from a dshow filter via some method. Regarding the programmatic control of the filter: a) Is it better to create a custom interface so that from the client filter I can QI the base capture filter or is it better to QI the base capture filter for IKsPropertySet and set the properties directly? The first choice would seem better as it would introduce a layer of indirection such that there would not be such a tight coupling between the minidriver and its usermode clients. b) If I were to use the custom interface, would it be better to implement it via IKsPropertySet or via KsGetObjectHandle and issue IOCTL_KS_PROPERTY? They seem identical. Regarding ksproxy plugins in general. What is the mechinism linking the extension COM objects to ksproxy? The examples I have seen all seem to have an exact correspondence between one propertyset GUID in the minidriver with one custom interface and one property page. Is this always the case? Are the following alternatives possible: 1) A custom interface but with no associated property set? 2) Multiple custom property pages associated with a single property set? 3) A single propertyset with any number of interfaces and property pages hung off it? These questions reflect uncertainty about my ability to implement my current thinking which is: 1) Add a one or more propertyset GUIDs to the minidriver to implement the custom aspects of the camera. 2) Have a single custom COM interface in usermode to permit programatic access to those aspects. 3) Have one or more property pages to permit amcap etc to access to aspects. These property sheets would be implemented by using the custom inteface. Regards, Tom Udale Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34403
  - 18
    - Device could not start. I have a PCI driver for our custom I/O board. I generated the device driver with Walter's wizard. I modified the Toaster class installer for our device. I used a combination of the DDK inf generator and existing inf files. It looks like the driver worked just fine for a couple of months. Now, when I have one PCI card in the system, the device manager reports: This device cannot start. (Code 10) I can power down the machine, add a second card to the same bus segment, and both cards work fine when I power the system on. Where should I start to look? Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34398
  - 19
    - replacing Unidrv UI dll. Hi, I'm developing a printer driver.It doesn't do any rendering. All it does is displaying the UI to capture print settings. That UI should have my own property sheets. Is it possible to replace Unidrvui.dll with my own ui dll for Unidrv minidriver? Or can I have a dummy rendering dll and my own UI dll? What could be the implications? Thanks, Kiran Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34397
  - 20
    - Rendering Plugin's EnablePDEV Hello, I am currently developing a common rendering plugin for 5 serial printers, In EnablePDEV() I tried using the pPrinterName parameter to differentiate between my 5 printers so that I can insert customized code for each printer model. My problem is, when I set the port to FILE: It seems that the value of pPrinterName is always the default printer(not the currently selected printer), It works fine when set to other ports like LPT1. Is this a specification? Or maybe I'M doing it all wrong, Can anybody tell me how to get the currently selected printer during or before EnablePDEV timing. Thanks in advance -andrew Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34389
  - 21
    - Interrupts in PCMCIA device driver Hi, I have been struggling with this problem for some time, so any help from someone who has written a PCMCIA device driver would be greatly appreciated! I have written a working Win2K device driver for a PCI device, and am now writing a device driver for the PCMCIA version of the device (some code included below). My driver does not receive interrupts although the call to IoConnectInterrupt() succeeds. I have gone through the PSCR smartcard device driver code in the DDK samples. I am also familiar with the DisabeISAToPCIRouting registry setting - didn't make a difference in my case. Is there something different one needs to do to receive interrupts in a PCMCIA device driver as compared to a PCI device driver? Thanks! ----------------- Some code from the driver ------------------------ GLOBALS Globals; #ifdef ALLOC_PRAGMA #pragma alloc_text (INIT, DriverEntry) #pragma alloc_text (PAGE, PolarisAddDevice) #pragma alloc_text (PAGE, PolarisCreateClose) #pragma alloc_text (PAGE, PolarisDispatchIoctl) #pragma alloc_text (PAGE, PolarisReadWrite) #pragma alloc_text (PAGE, PolarisDispatchPnp) #pragma alloc_text (PAGE, PolarisUnload) #endif NTSTATUS DriverEntry( IN PDRIVER_OBJECT DriverObject, IN PUNICODE_STRING RegistryPath ) { // Save the RegistryPath. Globals.RegistryPath.MaximumLength = RegistryPath->Length + sizeof(UNICODE_NULL); Globals.RegistryPath.Length = RegistryPath->Length; Globals.RegistryPath.Buffer = ExAllocatePoolWithTag ( PagedPool, Globals.RegistryPath.MaximumLength, POLARIS_POOL_TAG); if (Globals.RegistryPath.Buffer) { RtlCopyUnicodeString(&Globals.RegistryPath, RegistryPath); } else { PolarisDebugPrint ((0, "Couldn't allocate pool for registry path.")); return STATUS_INSUFFICIENT_RESOURCES; } // Populate the Dispatch routines DriverObject->MajorFunction[IRP_MJ_PNP] = PolarisDispatchPnp; DriverObject->MajorFunction[IRP_MJ_POWER] = PolarisDispatchPower; DriverObject->MajorFunction[IRP_MJ_CREATE] = PolarisCreateClose; DriverObject->MajorFunction[IRP_MJ_CLOSE] = PolarisCreateClose; DriverObject->MajorFunction[IRP_MJ_DEVICE_CONTROL] = PolarisDispatchIoctl; DriverObject->MajorFunction[IRP_MJ_READ] = PolarisReadWrite; DriverObject->MajorFunction[IRP_MJ_WRITE] = PolarisReadWrite; DriverObject->MajorFunction[IRP_MJ_CLEANUP] = PolarisCleanup; // Populate AddDevice/DriverUnload DriverObject->DriverExtension->AddDevice = PolarisAddDevice; DriverObject->DriverUnload = PolarisUnload; return STATUS_SUCCESS; } /* * This routine adds a device to the system */ NTSTATUS PolarisAddDevice( IN PDRIVER_OBJECT DriverObject, IN PDEVICE_OBJECT PhysicalDeviceObject ) { NTSTATUS status = STATUS_SUCCESS; PDEVICE_OBJECT deviceObject = NULL; PPOLARIS_DEVICE_INFO pDeviceInfo = NULL; POWER_STATE powerState; PAGED_CODE(); // Create a device status = IoCreateDevice (DriverObject, sizeof (POLARIS_DEVICE_INFO), NULL, FILE_DEVICE_NETWORK, FILE_DEVICE_SECURE_OPEN, FALSE, &deviceObject); if (!POLARIS_SUCCESS (status)) { return status; } // Initialize the device extension. pDeviceInfo = (PPOLARIS_DEVICE_INFO) deviceObject->DeviceExtension; // Set the initial state of the FDO INITIALIZE_PNP_STATE(pDeviceInfo); // Store the PDO pDeviceInfo->UnderlyingPDO = PhysicalDeviceObject; // Set device power state pDeviceInfo->DevicePowerState = PowerDeviceD0; // Tell lower driver the power state powerState.DeviceState = pDeviceInfo->DevicePowerState; PoSetPowerState ( deviceObject, DevicePowerState, powerState ); // Tell the Plug & Play system that this device will need an interface status = IoRegisterDeviceInterface ( PhysicalDeviceObject, (LPGUID) &GUID_CISCO_AIRO_DEVICE_INTERFACE_CLASS, NULL, &pDeviceInfo->InterfaceName); if (!POLARIS_SUCCESS (status)) { IoDeleteDevice (deviceObject); PolarisDebugPrint ((2, "PolarisAddDevice: returning status: %d\n", status)); return status; } // Attach device to the device stack pDeviceInfo->NextLowerDriver = IoAttachDeviceToDeviceStack( deviceObject, PhysicalDeviceObject); // // Initialize Remove Lock // IoInitializeRemoveLock (&pDeviceInfo->RemoveLock , POLARIS_POOL_TAG, 1, // MaxLockedMinutes 5); // HighWatermark, this parameter is used only on checked build. // Set the flag if the device is not holding a pagefile // crashdump file or hibernate file. // Clear the DO_DEVICE_INITIALIZING flag. // Note: Do not clear this flag until the driver has set the // device power state and the power DO flags. deviceObject->Flags |= DO_BUFFERED_IO; deviceObject->Flags |= DO_POWER_PAGABLE; deviceObject->Flags &= ~DO_DEVICE_INITIALIZING; pDeviceInfo->Self = deviceObject; pDeviceInfo->Removed = FALSE; pDeviceInfo->Started = FALSE; pDeviceInfo->InterruptRegistered = FALSE; pDeviceInfo->RxBufferLen = 32 * PAGE_SIZE; // Hardcoded ? #ifdef BLOCKING_READ pDeviceInfo->ReadEventHandle = NULL; pDeviceInfo->ReadTimeOut.QuadPart = -(10000 * 2000); // 1 second timeout, hardcoded #endif return status; } /* * This routine handles PnP IRPs */ NTSTATUS PolarisDispatchPnp ( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp ) { PPOLARIS_DEVICE_INFO pDeviceInfo; PIO_STACK_LOCATION stack; PDEVICE_OBJECT attachedPDO; NTSTATUS status = STATUS_SUCCESS; BOOLEAN irpSkipped = FALSE; PolarisDebugPrint((3, "PolarisDispatchPnp called\n")); PAGED_CODE (); pDeviceInfo = (PPOLARIS_DEVICE_INFO) DeviceObject->DeviceExtension; attachedPDO = pDeviceInfo->NextLowerDriver; stack = IoGetCurrentIrpStackLocation (Irp); if (Deleted == GET_CURRENT_PNP_STATE(pDeviceInfo)) { // Since the device is removed, we will not hold any IRPs. // We just fail it. Irp->IoStatus.Status = STATUS_DELETE_PENDING; IoCompleteRequest (Irp, IO_NO_INCREMENT); return STATUS_DELETE_PENDING; } // Acquire the remove lock status = IoAcquireRemoveLock (&pDeviceInfo->RemoveLock, Irp); if (!POLARIS_SUCCESS (status)) { Irp->IoStatus.Status = status; IoCompleteRequest (Irp, IO_NO_INCREMENT); return status; } // Print minor function PolarisDebugPrint((0, "PnP Minor function: %s\n", PnPMinorFunctionString(stack->MinorFunction))); // Process IRP switch (stack->MinorFunction) { case IRP_MN_START_DEVICE: if (!pDeviceInfo->Started) { // We have to call the underlying driver first status = PolarisCallLowerDriver(attachedPDO, Irp); if (status == STATUS_SUCCESS) { // The device is starting. status = PolarisStartDevice(DeviceObject, Irp); if(POLARIS_SUCCESS(status)) { status = IoSetDeviceInterfaceState(&pDeviceInfo->InterfaceName, TRUE); if (!POLARIS_SUCCESS (status)){ PolarisDebugPrint((0, "IoSetDeviceInterfaceState failed: 0x%x\n", status)); Irp->IoStatus.Status = status; IoCompleteRequest (Irp, IO_NO_INCREMENT); // Release the remove lock IoReleaseRemoveLock(&pDeviceInfo->RemoveLock, Irp); return status; } // Set the PnP state to Started SET_NEW_PNP_STATE(pDeviceInfo, Started); pDeviceInfo->Started = TRUE; pDeviceInfo->Removed = FALSE; HardwareEnableInterrupts(pDeviceInfo); } } } break; case IRP_MN_QUERY_REMOVE_DEVICE: status = PolarisCanRemoveDevice(DeviceObject); if(POLARIS_SUCCESS(status)) { SET_NEW_PNP_STATE(pDeviceInfo, RemovePending); status = PolarisCallLowerDriver(attachedPDO, Irp); } break; case IRP_MN_SURPRISE_REMOVAL: // The device has been unexpectedly removed from the machine // and is no longer available for I/O. Stop all access to the device. // Release any resources associated with the device, but leave the // device object attached to the device stack until the PnP Manager // sends a subsequent IRP_MN_REMOVE_DEVICE request. // You should fail any outstanding I/O to the device. You will // not get a remove until all the handles open to the device // have been closed. pDeviceInfo->Removed = TRUE; pDeviceInfo->Started = FALSE; // Release system resources status = PolarisReleaseResources(DeviceObject); if(POLARIS_SUCCESS(status)) { // Set the PnP state to SurpriseRemovePending SET_NEW_PNP_STATE(pDeviceInfo, SurpriseRemovePending); } break; case IRP_MN_REMOVE_DEVICE: // Relinquish all resources here. // Detach and delete the device object so that // your driver can be unloaded. You get remove // either after query_remove or surprise_remove. if(!pDeviceInfo->Removed) { pDeviceInfo->Removed = TRUE; pDeviceInfo->Started = FALSE; // Stop the Adapter HardwareStopAdapter(pDeviceInfo); // Release system resources status = PolarisReleaseResources(DeviceObject); if(POLARIS_SUCCESS(status)) { // Set the PnP state to SurpriseRemovePending SET_NEW_PNP_STATE(pDeviceInfo, RemovePending); } status = PolarisCallLowerDriver(attachedPDO, Irp); } if(POLARIS_SUCCESS(status)) { // Set the PnP state to Deleted SET_NEW_PNP_STATE(pDeviceInfo, Deleted); // Disable the interface IoSetDeviceInterfaceState(&pDeviceInfo->InterfaceName, FALSE); // Remove the device and all references IoDeleteSymbolicLink(&pDeviceInfo->InterfaceName); IoDetachDevice(pDeviceInfo->NextLowerDriver); IoDeleteDevice(DeviceObject); } break; case IRP_MN_QUERY_STOP_DEVICE: status = PolarisCanStopDevice(DeviceObject); if(POLARIS_SUCCESS(status)) { SET_NEW_PNP_STATE(pDeviceInfo, StopPending); status = PolarisCallLowerDriver(attachedPDO, Irp); } break; case IRP_MN_STOP_DEVICE: if(pDeviceInfo->Started) { // Stop the Adapter HardwareStopAdapter(pDeviceInfo); // Release system resources status = PolarisReleaseResources(DeviceObject); if(POLARIS_SUCCESS(status)) { // Mark the device as stopped. IoSetDeviceInterfaceState(&pDeviceInfo->InterfaceName, FALSE); SET_NEW_PNP_STATE(pDeviceInfo, Stopped); } pDeviceInfo->Started = FALSE; status = PolarisCallLowerDriver(attachedPDO, Irp); } break; default: // This is an Irp that is only useful for underlying drivers status = PolarisCallLowerDriver(attachedPDO, Irp); irpSkipped = TRUE; break; } if (irpSkipped == FALSE) { // Don't touch the status field of irps we don't process Irp->IoStatus.Status = status; } PolarisDebugPrint((3, "PolarisDispatchPnp status: 0x%x\n", status)); IoCompleteRequest(Irp, IO_NO_INCREMENT); // Release the remove lock IoReleaseRemoveLock(&pDeviceInfo->RemoveLock, Irp); return status; } NTSTATUS PolarisStartDevice ( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp ) { PCM_RESOURCE_LIST resourcesTranslated; PCM_RESOURCE_LIST resources; PCM_PARTIAL_RESOURCE_DESCRIPTOR resource; PCM_PARTIAL_RESOURCE_DESCRIPTOR resourceTranslated; PCM_PARTIAL_RESOURCE_LIST partialResourceList; PCM_PARTIAL_RESOURCE_LIST partialResourceListTranslated; PCM_FULL_RESOURCE_DESCRIPTOR fullListTranslated; PIO_STACK_LOCATION stack; PPOLARIS_DEVICE_INFO pDeviceInfo; NTSTATUS status = STATUS_SUCCESS; ULONG index; BOOLEAN foundInterruptResource = FALSE; int count = 0; PAGED_CODE(); // PolarisDebugPrint((3, "PolarisStartDevice called\n")); pDeviceInfo = (PPOLARIS_DEVICE_INFO) DeviceObject->DeviceExtension; stack = IoGetCurrentIrpStackLocation (Irp); // // Do whatever initialization needed when starting the device: // gather information about it, update the registry, etc. // if ((NULL != stack->Parameters.StartDevice.AllocatedResources) && (NULL != stack->Parameters.StartDevice.AllocatedResourcesTranslated)) { // // Set up the resource information that we will use to access the // controller hardware. We always expect only 1 full set of resources. // In that list we expect a DMA channel, an Interrupt vector, and 2 I/O Port // ranges. If we don't see all the required resources we will woof. // resourcesTranslated = stack->Parameters.StartDevice.AllocatedResourcesTranslated; partialResourceListTranslated = &resourcesTranslated->List[0].PartialResourceList; resourceTranslated = &partialResourceListTranslated->PartialDescriptors[0]; resources = stack->Parameters.StartDevice.AllocatedResources; partialResourceList = &resources->List[0].PartialResourceList; resource = &partialResourceList->PartialDescriptors[0]; ASSERT( resourcesTranslated->Count == 1 ); fullListTranslated = &resourcesTranslated->List[0]; // Set up the bus information pDeviceInfo->BusType = fullListTranslated->InterfaceType; pDeviceInfo->BusNumber = fullListTranslated->BusNumber; PolarisDebugPrint((0, "PolarisStartDevice: BusType = %d\n", pDeviceInfo->BusType)); // // Parameters.StartDevice.AllocatedResources points to a // CM_RESOURCE_LIST describing the hardware resources that // the PnP Manager assigned to the device. This list contains // the resources in raw form. Use the raw resources to program // the device. // // Parameters.StartDevice.AllocatedResourcesTranslated points // to a CM_RESOURCE_LIST describing the hardware resources that // the PnP Manager assigned to the device. This list contains // the resources in translated form. Use the translated resources // to connect the interrupt vector, map I/O space, and map memory. // // If it is a PCI card, do 16-bit I/O operations if (pDeviceInfo->BusType == PCIBus) { do8bitIO = 0; } for (index = 0; index < partialResourceList->Count; index++, resource++, resourceTranslated++) { switch (resource->Type) { case CmResourceTypePort: { // use the second port, device dependent condition if (pDeviceInfo->BusType == PCIBus) { if (count == 0 ) { count ++; break; } } switch (resourceTranslated->Type) { case CmResourceTypePort: // PolarisDebugPrint((2, "Resource RAW Port: (%x) Length: (%d)\n", // resource->u.Port.Start.LowPart, resource->u.Port.Length)); // // PolarisDebugPrint((2, // "Resource Translated Port: (%x) Length: (%d)\n", // resourceTranslated->u.Port.Start.LowPart, // resourceTranslated->u.Port.Length)); // Set the base I/O address of the device pDeviceInfo->DeviceBaseIO = (UCHAR *)resourceTranslated->u.Port.Start.u.LowPart; break; case CmResourceTypeMemory: PolarisDebugPrint((2, "Resource Translated Memory: (%x) Length: (%d)\n", resourceTranslated->u.Memory.Start.LowPart, resourceTranslated->u.Memory.Length)); // // Perform memory mapping here. // break; default: // PolarisDebugPrint((0, "PolarisStartDevice: Unhandled resource_type (0x%x)\n", // resourceTranslated->Type)); TRAP (); break; } } break; case CmResourceTypeDma: { DEVICE_DESCRIPTION deviceDesc; PolarisDebugPrint((0, "PolarisStartDevice: DMA - %04x\n", resourceTranslated->u.Dma.Channel) ); // Call PolarisSetupDMA() here if DMA is needed } break; case CmResourceTypeMemory: // PolarisDebugPrint((2, "Resource RAW Memory: (%x) Length: (%d)\n", // resource->u.Memory.Start.LowPart, resource->u.Memory.Length)); // PolarisDebugPrint((2, "Resource Translated Memory: (%x) Length: (%d)\n", // resourceTranslated->u.Memory.Start.LowPart, resourceTranslated->u.Memory.Length)); // Perform memory address mapping with PolarisMapDeviceAddress(). break; case CmResourceTypeInterrupt: // PolarisDebugPrint((0, "PolarisStartDevice: CmResourceTypeInterrupt\n")); if ( resourceTranslated->Flags & CM_RESOURCE_INTERRUPT_LATCHED) { pDeviceInfo->InterruptMode = Latched; } else { pDeviceInfo->InterruptMode = LevelSensitive; } pDeviceInfo->ControllerVector = resourceTranslated->u.Interrupt.Vector; pDeviceInfo->ProcessorMask = resourceTranslated->u.Interrupt.Affinity; pDeviceInfo->ControllerIrql = (KIRQL)resourceTranslated->u.Interrupt.Level; pDeviceInfo->SharableVector = TRUE; pDeviceInfo->SaveFloatState = FALSE; foundInterruptResource = TRUE; break; default: // PolarisDebugPrint((0, "Unhandled resource type (0x%x)\n", resource->Type)); break; } } if (foundInterruptResource == TRUE) { // PolarisDebugPrint((0, "PolarisStartDevice: Connecting Interrupt\n")); // Initialize the spin lock KeInitializeSpinLock(&pDeviceInfo->IntrSpinLock); // Connect the interrupt status = IoConnectInterrupt( &pDeviceInfo->InterruptObject, PolarisISR, pDeviceInfo, &pDeviceInfo->IntrSpinLock, pDeviceInfo->ControllerVector, pDeviceInfo->ControllerIrql, pDeviceInfo->ControllerIrql, pDeviceInfo->InterruptMode, pDeviceInfo->SharableVector, pDeviceInfo->ProcessorMask, pDeviceInfo->SaveFloatState ); if ( POLARIS_SUCCESS(status) ) { pDeviceInfo->InterruptRegistered = TRUE; } else { return status; } } // If successful and got memory/IO space, initialize the H/W if ( POLARIS_SUCCESS(status) && ((pDeviceInfo->DeviceVirtualAddress) || (pDeviceInfo->DeviceBaseIO)) ) { // Initialize the Hardware status = HardwareInitializeAdapter(pDeviceInfo, pDeviceInfo->DeviceBaseIO); if (!POLARIS_SUCCESS(status)) { return STATUS_UNSUCCESSFUL; } } } // PolarisDebugPrint((0, "PolarisStartDevice: returning status: 0x%x\n", status)); return status; } void HardwareEnableInterrupts(PPOLARIS_DEVICE_INFO pDeviceInfo) { airo_info *ai = &(pDeviceInfo->ai); USHORT status; /* Reset the status register */ status = IN4500( ai, EVSTAT ); OUT4500( ai, EVACK, status ); /* Enable the interrupts */ if (!ai->interruptEnabled) { OUT4500( ai, EVINTEN, STATUS_INTS ); ai->interruptEnabled = TRUE; } } Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34387
  - 22
    - a question about win2000 ddk PORTIO sample!!!!!! I use win2k DDK to build the PORTIO sample in DDK successfully. But something is wrong when I use the gpdread and gpdwrite to test the driver. I use command line "GpdWrite -b 1 2" to write the number 2 to assigned 'base port address + 1', and then "GpdRead -b 1 "to read out. But the number read out is always 0xFF. I also tested writing a number every 1000 milliseconds and reading every 600 millisecond, but the read-out number kept 0xFF. what does the sample mean? could you tell me why? Softice driver suite(driverworks) contains similar sample, things are same. ____________________________________________________________________________ _________________________ Test OS: win2000 server Develop Environment: win2k ddk, visual studio 6.0 sp5 Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34386
  - 23
    - Loading filter driver during OS install I have a upper device filter driver that I need to load during install (ie. Hit F6 for scsi drivers). I was wondering if this has been done (I'm sure it has) and how to do it. I wonder about whether the txtsetup.oem actually loads and parses the inf early in the setup or not, and how you would actually code up the txtsetup.oem. Do you need to need to include a copy of the driver that your filtering (and it's inf) on your driver disk as well, or will this land from the media in time to be present when the filter driver's inf is parsed. -Dan Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34383
  - 24
    - Palettes and kernel-streaming driver (USBCAMD2) Hello, I am writing a USB camera mini-driver using USBCAMD2. I have the basic driver working, but need to get the video into the desired format for proper viewing in DirectShow. The video is 8-bit grayscale, and is interlaced (I receive two fields in one "frame" from the camera and interlace them in the CamProcessRawVideoFrameEx () function in my minidriver. They are displayed on the screen using RGB8 (8-bit color.) I would like to know how I can describe (or set somehow) the color palette as a grayscale palette. I've tried converting to RGB24 in the minidriver and replicating the 8-bit pixel value that I receive from the camera in the RGB fields. This works, but is so slow that I'm dropping frames. Any suggestions or hints would be appreciated. Sincerely, Howard M. Harte ======================== Harte Technologies, LLC. (925) 551-0120 (voice) (925) 551-0125 (fax) http://www.hartetechnologies.com/ Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34379
  - 25
    - Custom USB Driver Development Hi All I'm a newbie at this, so apologies in advance for any wrong information. I'm trying to write custom usb drivers for one of the usb products. I have win ddk and visual studio installed. Can somone explain me/give me a link on how to approach this problem. I'm quite lost at the moment and need serious help in getting started. pls advice Regards Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34376
- Next
  - 1
    - USB Driver development Hi All I'm trying to generate custom drivers for one of our usb devices. I have windows DDK and Visual Studio Installed. Has anyone got a link that demonstrates how to proceed in generating custom drivers. I'm a beginner at this and kinda lost. Pls advice Regards Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34375
  - 2
    - How to detect Network Cable Unplugged? Hi, For a netwrok card (ie. ethernet), how does windows know if the network cable is unplugged? Does the driver handle any polling routine? The reason I am asking is because I am trying to a virtual network driver which drives the traffic to an application. I need to find some way to determine if that application is running. Thanks, Billy. Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34368
  - 3
    - HP deskjet on Windows XP The driver for this printer is included in WinXP and installs okay when plugging in the printers USB cable. My problem is that on the paper size list there is no "custom" size as refered to in the manual. I want to print on 3X5 index cards which is also not on the list. Even if I select a larger card like 4X6 and set margins to reduce it to 3X5 size it prints outside the margins. HP says I will have to wait for them to update the driver. Anyone know of a quicker fix for this??? Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34362
  - 4
    - Driver to install a Digital Camera I followed all the instructions and when I connect the camera shows a note saying the driver for this harware is not installed. Then ask me to use the Windows MilleniumEdition disk which I don't have. How or where can I get the disk. I need the answer as fast as you can. Thanks Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34361
  - 5
    - How does windows handle PCMCIA Ok, I really need to know how windows 2000/XP handles the insertion of a PCMCIA card. What I have discovered with my card is that occasionally (4-5%) of the time it works (I have found that in this case card enable is activated) and the rest of the time it fails (card enable is not activated). This only occures though within the VideoMiniport drivers. The PnP Functional Driver I wrote does not seem to have this problem. So if anyone can tell me/point me how exactly windows handles insertion or how the Videominiport deals with it, I wolud greatly appreciate it. -- Brian V. Minier Interactive Imaging Systems, Inc www.iisvr.com Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34355
  - 6
    - Visual Studio library path size limit I have a project which takes quite a lot of library paths, due to our environment setup. The problem now is that the line in the *.dsp filefor the linker is more than 4Kb long. Is there a limit on how long the line may be? I mean the # ADD LINKER32 <linkeroptions> in the dsp file. When I paste in the project file all the library paths then Visual Studio can compile it, but when I exit the project VC asks me to safe the changes to the project file and when I try to reload the project the line is crippled. Any ideas how to circumvent this size limit? I tried to spread the line over several lines which worked, but as soon as I change something in the settings Visual Studio will rewrite the dsp file and create the long line again. -- Gerhard Gruber Für jedes menschliche Problem gibt es immer eine einfache Lösung: Klar, einleuchtend und falsch. (Henry Louis Mencken) Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34354
  - 7
    - IoCancelIrp Step 1. We create IRP: IoBuildDeviceIoControlRequest Step 2. We pass IRP to other driver: IoCallDriver Step 3. We want to cancel this IRP: can we call IoCancelIrp ? The IRP can be already deleted by I/O Manager... How long IRP leaves and when we can use pIrp pointer obtained in the step 1? Thanks, Vitaly Kravtsov mailto:VitalyKravtsov@mail.ru Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34339
  - 8
    - VideoDriver and PCMCIA Function Configuration Registers Is there a way to access the Function Configuration Registers is a VideoMiniport driver. I can access (somewhat) I/O memory (given to me through VideoPortGetAccessRanges) but nothing comes for the FCR's. Of course, given that the card gets mapped to ISA (determined from the VIDEO_PORT_CONFIG_INFO) I may not need to access the Registers. Also, any one who is famialar with the internal workings of the VideoPort functions, what PCMCIA Configuration Registers are needed for successful operation. Currently we only support a subset of the registers PC-Card requires because we are a CF-Card, could this cause a problem? Thanks in advance, yet again. -- Brian V. Minier Interactive Imaging Systems, Inc www.iisvr.com Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34338
  - 9
    - How can I get selected option items from property sheet page? Hi. I am developing a printer driver which prints any document to an image file. I am using Unidrv.dll and Win2000 DDK sample Oemui.dll. There is one more component, rendering plug-in. I added a new property sheet page and a option item using a method in Oemui.dll like below. // source code // HRESULT hrOEMDocumentPropertySheets(PPROPSHEETUI_INFO pPSUIInfo, LPARAM lParam, IPrintOemDriverUI* pOEMHelp) { LONG_PTR lResult; ............ // Do action. switch(pPSUIInfo->Reason) { case PROPSHEETUI_REASON_INIT: { DWORD dwSheets = 0; PCBUSERDATA pUserData; POEMUIPSPARAM pOEMUIParam = (POEMUIPSPARAM) pPSUIInfo->lParamInit; HANDLE hHeap = pOEMUIParam->hOEMHeap; POEMDEV pOEMDev = (POEMDEV) pOEMUIParam->pOEMDM; COMPROPSHEETUI Sheet; DLGPAGE PageProp; // Init property page. memset(&Sheet, 0, sizeof(COMPROPSHEETUI)); Sheet.cbSize = sizeof(COMPROPSHEETUI); Sheet.Flags = CPSUIF_UPDATE_PERMISSION; Sheet.hInstCaller = ghInstance; Sheet.pCallerName = GetStringResource(hHeap, ghInstance, IDS_NAME); Sheet.pHelpFile = NULL; Sheet.pfnCallBack = OEMDocUICallBack; Sheet.pDlgPage = CPSUI_PDLGPAGE_ADVDOCPROP; Sheet.cOptItem = 1; Sheet.IconID = IDI_CPSUI_PRINTER; Sheet.pOptItemName = GetStringResource(hHeap, ghInstance, IDS_SECTION); Sheet.CallerVersion = 0x100; Sheet.OptItemVersion = 0x100; // Init user data. pUserData = (PCBUSERDATA) HeapAlloc(hHeap, HEAP_ZERO_MEMORY, sizeof(CBUSERDATA)); pUserData->hComPropSheet = pPSUIInfo->hComPropSheet; pUserData->pfnComPropSheet = pPSUIInfo->pfnComPropSheet; pUserData->pOEMUIParam = pOEMUIParam; Sheet.UserData = (ULONG_PTR) pUserData; // Create OptItems for page. Sheet.pOptItem = CreateOptItems(hHeap, Sheet.cOptItem); // Initialize OptItems Sheet.pOptItem[0].cbSize = sizeof(OPTITEM); Sheet.pOptItem[0].Level = 1; Sheet.pOptItem[0].Flags = OPTIF_COLLAPSE; Sheet.pOptItem[0].pName = GetStringResource(hHeap, ghInstance, IDS_SECTION); Sheet.pOptItem[0].Sel = pOEMDev->dwDriverData; Sheet.pOptItem[0].pOptType = CreateOptType(hHeap, 3); Sheet.pOptItem[0].pOptType->Type = TVOT_3STATES; Sheet.pOptItem[0].pOptType->pOptParam[0].pData = GetStringResource(hHeap, ghInstance, IDS_TIF); Sheet.pOptItem[0].pOptType->pOptParam[1].pData = GetStringResource(hHeap, ghInstance, IDS_JPG); Sheet.pOptItem[0].pOptType->pOptParam[2].pData = GetStringResource(hHeap, ghInstance, IDS_BMP); Sheet.pOptItem[0].pOptType->pOptParam[0].IconID = IDS_TIF; Sheet.pOptItem[0].pOptType->pOptParam[1].IconID = IDS_JPG; Sheet.pOptItem[0].pOptType->pOptParam[2].IconID = IDS_BMP; Sheet.pOptItem[0].pOptType->Count = 3; // Add property sheets. lResult = pPSUIInfo->pfnComPropSheet(pPSUIInfo->hComPropSheet, CPSFUNC_ADD_PCOMPROPSHEETUI, (LPARAM)&Sheet, (LPARAM)&dwSheets); } break; ............ } pPSUIInfo->Result = lResult; return S_OK; } And it works well. There was a newly added property sheet page in printing dialog. I'd like to let the user select an output file format(bmp, tif, etc.) through the property sheet page(using TVOT_3STATES in above source code) and add some more option items in the same sheet page. The problem is that I don't have any idea how I can get the results of what user selected through the option items in the property sheet page. There are some answers to similar question but not enough to understand how and what. I'd like to use the selected options in rendering plug-in module. Does anyone know the solution to this question? If possible, please show me some sample source codes. Or explain in detail. Thanks in advance. Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34333
  - 10
    - Multiple IRP requests from one driver to another Hi All, My driver uses standard serial port driver. It set RTS signal and wait for CTS signal change. 1. Driver send IRP to serial port driver with control code IOCTL_SERIAL_WAIT_ON_MASK and doesn't wait for it. 2. Driver send IRP to serial port driver with control code IOCTL_SERIAL_SET_RTS and wait for it. 3. Driver wait for first IRP through the Event, passed to IoBuildDeviceIoControlRequest. This approach does not work. User mode application is locked and driver can not be unloaded. May be the IoSetCompletionRoutine is solution ? Thanks. VitalyKravtsov mailto:vitalykravtsov@mail.ru Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34332
  - 11
    - Protocol driver, don't understand Hi, I try to understand how to write my protocol driver for a WLAN adapter. I read a sample in the PocketPC Platform Builder (Passthru). I don't understand everything, and there's still one thing that I don't get: how should I use this "driver" in my application to retrieve the packets? Can you give me some information to better understand a protocol driver and how to use it in an application. Thank you /Marco Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34326
  - 12
    - PrintProcessor Installation problems on Win98SE/Me Hello All, I developed a minidriver and relative Print Processor for our Pos printer product on Win98Se and Me. Then I wrote a .INF file for install the package. The printer is installed correctly, but it doesn't catch my PrintProcessor. All the files (minidriver + printproc.) are copied in C:\WINDOWS\SYSTEM. But when I go to check with 'Regedit', what the installation has written into registry, I can see that no subkeys for my printprocess are been made in: HKLM\System\CurrentControlSet\Control\Print\Environments\Wi ndows 4.0\Print Processors; while the subkey of my printer is present, and into it the field "Print Processor" has "WinPrint" as value. By the way, I started to develop my PrintProcessor from Win98 DDK , modifing the Winprint sample included in src\printers\spooler' subdirectory. And, I took infos for insert printprocess from W98 DDK documentation. Where is my mistake? Somebody have any idea? Please, Help me. Below I inserted my INF file. TIA Giandomenico. [Version] Signature=$CHICAGO$ ver=01.00.03 Class=Printer Provider=%OLIVETTI% LayoutFile=layout.inf,layout1.inf,layout2.inf [SourceDisksNames] 1="PRT100 Res(180x180) PrinterDriver Disk",,0001 [Manufacturer] "OLIVETTI" [OLIVETTI] "PRT100 Res(180x180) Receipt" = PRT100EP.DRV,PRT100 Res (180x180) Receipt "PRT100_180x180 ReduceA4" = PRT100RE.DRV,PRT100_180x180 ReduceA4 ; ; Installer Sections ; [PRT100EP.DRV] CopyFiles=PRT100EP_COPY,UNI DataSection=UNI_DATA,PRT_PROCESS [PRT100RE.DRV] CopyFiles=PRT100RE_COPY,UNI DataSection=UNI_DATA,PRT_PROCESS ; Copy Sections ; [PRT100EP_COPY] PRT100EP.DRV POSPRINT.DLL [PRT100RE_COPY] PRT100Re.DRV POSPRINT.DLL [UNI] UNIDRV.DLL UNIDRV.HLP ICONLIB.DLL ; ; Data Sections ; [UNI_DATA] HelpFile=UNIDRV.HLP DefaultDataType=RAW [PRT_PROCESS] PrintProcessor=%POS_PrintProcess% [DestinationDirs] DefaultDestDir=11 [SourceDiskeFiles] PRT100EP.DRV=1,WIN98 PRT100Re.DRV=1,WIN98 POSPRINT.DLL=1,WIN98 ; ; Localizable Strings ; [Strings] OLIVETTI="OLIVETTI" CLASSNAME="Printer" POS_PrintProcess="POSPrintPROCESS,POSPRINT.DLL" Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34324
  - 13
    - How can I get the results from newly added property sheet page? Hi. I am developing a printer driver which prints any document to an image file. I am using Unidrv.dll and Win2000 DDK sample Oemui.dll. There is one more component, rendering plug-in. I added a new property sheet page and a option item using a method in Oemui.dll like below. // source code // HRESULT hrOEMDocumentPropertySheets(PPROPSHEETUI_INFO pPSUIInfo, LPARAM lParam, IPrintOemDriverUI* pOEMHelp) { LONG_PTR lResult; ............ // Do action. switch(pPSUIInfo->Reason) { case PROPSHEETUI_REASON_INIT: { DWORD dwSheets = 0; PCBUSERDATA pUserData; POEMUIPSPARAM pOEMUIParam = (POEMUIPSPARAM) pPSUIInfo->lParamInit; HANDLE hHeap = pOEMUIParam->hOEMHeap; POEMDEV pOEMDev = (POEMDEV) pOEMUIParam->pOEMDM; COMPROPSHEETUI Sheet; DLGPAGE PageProp; // Init property page. memset(&Sheet, 0, sizeof(COMPROPSHEETUI)); Sheet.cbSize = sizeof(COMPROPSHEETUI); Sheet.Flags = CPSUIF_UPDATE_PERMISSION; Sheet.hInstCaller = ghInstance; Sheet.pCallerName = GetStringResource(hHeap, ghInstance, IDS_NAME); Sheet.pHelpFile = NULL; Sheet.pfnCallBack = OEMDocUICallBack; Sheet.pDlgPage = CPSUI_PDLGPAGE_ADVDOCPROP; Sheet.cOptItem = 1; Sheet.IconID = IDI_CPSUI_PRINTER; Sheet.pOptItemName = GetStringResource(hHeap, ghInstance, IDS_SECTION); Sheet.CallerVersion = 0x100; Sheet.OptItemVersion = 0x100; // Init user data. pUserData = (PCBUSERDATA) HeapAlloc(hHeap, HEAP_ZERO_MEMORY, sizeof(CBUSERDATA)); pUserData->hComPropSheet = pPSUIInfo->hComPropSheet; pUserData->pfnComPropSheet = pPSUIInfo->pfnComPropSheet; pUserData->pOEMUIParam = pOEMUIParam; Sheet.UserData = (ULONG_PTR) pUserData; // Create OptItems for page. Sheet.pOptItem = CreateOptItems(hHeap, Sheet.cOptItem); // Initialize OptItems Sheet.pOptItem[0].cbSize = sizeof(OPTITEM); Sheet.pOptItem[0].Level = 1; Sheet.pOptItem[0].Flags = OPTIF_COLLAPSE; Sheet.pOptItem[0].pName = GetStringResource(hHeap, ghInstance, IDS_SECTION); Sheet.pOptItem[0].Sel = pOEMDev->dwDriverData; Sheet.pOptItem[0].pOptType = CreateOptType(hHeap, 3); Sheet.pOptItem[0].pOptType->Type = TVOT_3STATES; Sheet.pOptItem[0].pOptType->pOptParam[0].pData = GetStringResource(hHeap, ghInstance, IDS_TIF); Sheet.pOptItem[0].pOptType->pOptParam[1].pData = GetStringResource(hHeap, ghInstance, IDS_JPG); Sheet.pOptItem[0].pOptType->pOptParam[2].pData = GetStringResource(hHeap, ghInstance, IDS_BMP); Sheet.pOptItem[0].pOptType->pOptParam[0].IconID = IDS_TIF; Sheet.pOptItem[0].pOptType->pOptParam[1].IconID = IDS_JPG; Sheet.pOptItem[0].pOptType->pOptParam[2].IconID = IDS_BMP; Sheet.pOptItem[0].pOptType->Count = 3; // Add property sheets. lResult = pPSUIInfo->pfnComPropSheet(pPSUIInfo->hComPropSheet, CPSFUNC_ADD_PCOMPROPSHEETUI, (LPARAM)&Sheet, (LPARAM)&dwSheets); } break; ............ } pPSUIInfo->Result = lResult; return S_OK; } And it works well. There was a newly added property sheet page in printing dialog. I'd like to let the user select an output file format(bmp, tif, etc.) through the property sheet page(using TVOT_3STATES in above source code) and add some more option items in the same sheet page. The problem is that I don't have any idea how I can get the results of what user selected through the option items in the property sheet page. There are some answers to similar question but not enough to understand how and what. I'd like to use the selected options in rendering plug-in module. Does anyone know the solution to this question? If possible, please show me some sample source codes. Or explain in detail. Thanks in advance. Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34322
  - 14
    - linux's hdparm command equivalent in windows ?? Hi, When I issue the hdparm -S command on western digital hard disk, it does not sleep during inactivity. I would like to know : 1. if there is any equivalent command of hdparm in windows. 2. if western digital hard disk does not sleep under windwos too. rgds Shankar Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34317
  - 15
    - How to compiling Ndis 5.0 NDIS_WDM sample for Win98se/ windows 2000? Dear sirs, I have build ndis 5.0 driver(NDIS_WDM) running windows 2000 well, how can I porting it to windows 98se/windows me? when I installed with windows 2000 version driver,got a problem as "NDIS.VXD,NTKERN.VXD could not be loaded". How to solve this problem. thanks. lonely Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34313
  - 16
    - NDIS_WDM for Windows 2000 and Win98se/Me I'm trying to load my working Windows 2000 NDIS 5.0 driver on Windows ME. I've compiled using the BINARY_COMPATBLE switch, got a problem as "NDIS.VXD, NTKERN.VXD could not be loaded", Why? Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34312
  - 17
    - About virtual serial setup problem Hi, I install virtual serial in win2k,it receive IRP_MN_QUERY_DEVICE_RELATIONS and remove last serial port i added ,then new serial port replace it , Does anyone know why it is? Thanks in advance Fzcat Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34310
  - 18
    - Scheduled WorkItem takes two mintes to execute Hi, I experience long delays between the time I call NdisScheduleWorkItem to the time the WorkItem is executed. I have an NDIS miniport driver. When windows is shutting down it sends me a managment request to filter all incoming packets. I schedule this request with a work item. It takes windows from 10 seconds to two minute! to execute the workitem. Does anyone know why it takes windows so long? The OS i'm relating to is Win89SE. I have the shutdown patches installed. Thanks in advance, Yoni Baron, Conexant Systems. Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34306
  - 19
    - Using system DMA in PCI Device I have a PCI Device and I want to write driver for it. The PCI bridge on the board is not busmaster and i can't use busmaster dma for dma operations. I want to know if i can use Syatem Dma to do Dma operations. and if i can, how may i add Dma Resource to PnP Resource list. Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34301
  - 20
    - Does the vender can disable any property page of the printer?? Hello all, There are many property pages in the printer, like the "General", "Sharing", "Ports", "Advanced", and "Color Managment". Can I disable one of them (Ex: disable "Advance" page), or to disable all the radio buttons of one page(Ex: disable all the radio buttons of "Advance" page)? Thanks. Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34300
  - 21
    - 1394 Isoch on Windows 2000 I have developed 1394 driver similar to 1394diag. Isoch operations(no special requirements like TAG or SYNC) works almost. But very few times, I observe the buffers are not transmitted even if they are attached. I see it on analyzer. I stop Isoch and start it. Still Isoch wont transmit. No error in allocating Isoch buffer resources, no error in attaching buffers but simply my Isoch completion callback never called. Attached buffer callback is called and no error is reported. I dont understand what is causing the problem. No error is returned for attach buffers. Finally I found a work around, not really useful :( Unplug the cable and plug again. Allocate Isoch buffer resources and attach buffers and Isoch talk. It works now. So unplugging and plugging is causing something to reset and Isoch transmit works. I am not undertstanding circumstance that causes this problem. But I observe very few times. If I initiate bus reset through software command, no use. Only unplugging and plugging device will help. I have temptation to blame microsoft 1394 bus driver because after attaching the buffer, it is bus driver that transmits the Isoch data. But I couldn't find out the circumstances clearly that are causing the problem nor the way to debug. Any gliches in Isoch operations after every bus reset? Thanks, Raj Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34293
  - 22
    - About SetupDiSetDeviceRegistryProperty in win2K i use SetupDiSetDeviceRegistryProperty set SPDRP_HARDWAREID, use \src\general\setup\install is fine,but i copy it to my project , it failed and GetLastError()=87 best regards Fzcat char *inf="d:\\rial.inf"; char *hardid="*rial"; if (!SetupDiGetINFClass(inf,&ClassGUID,ClassName,sizeof(ClassName),0)) { return -1; } DeviceInfoSet = SetupDiGetClassDevs(&ClassGUID, 0, 0, DIGCF_PRESENT ); if (DeviceInfoSet == INVALID_HANDLE_VALUE) { return -1; } // Now create the element. // Use the Class GUID and Name from the INF file. // DeviceInfoData.cbSize = sizeof(SP_DEVINFO_DATA); if (!SetupDiCreateDeviceInfo(DeviceInfoSet, ClassName, &ClassGUID, NULL, 0, DICD_GENERATE_ID , &DeviceInfoData)) { return -1; } // // Add the HardwareID to the Device's HardwareID property. // if(!SetupDiSetDeviceRegistryProperty(DeviceInfoSet, &DeviceInfoData, SPDRP_HARDWAREID, (LPBYTE)hardid, (lstrlen(hardid)+1+1)*sizeof(TCHAR))) { ShowMessage((SetLastError(GetLastError()))); } Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34292
  - 23
    - bitmap printer driver and anti aliased fonts? Hi, I wrote a small gpd file to that only outputs raw RGB data to a file. Reading the written data as a raw RGB data with an image manipulation program gives me a correct image of the rendered document. Except the rendering of fonts is very ugly. Is there any possibility to tell unidrv to perform font anti aliasing for me? Thanks Dirk Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34290
  - 24
    - pop3 protocol traffic interception / hook Hello masters! I am sorry, if my question is trivial... I can`t find appropriate info in MSDN, DDK and SDK... Does anyone know how to intercept(hook) pop3 protocol traffic? I intend to develop my own universal spam filter, so i need exactly POP3. Is there driver need or winsock is enough? I curious - what personal firewalls use? Please suggest me technique, forum, keywords, url, sample, faq, tutorial, advice.. write me flashinc (commercial at) mail dot ru p.s. win32, visual c++ Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34287
  - 25
    - compiling ipdetect sample hi all i am trying to compile ipdetect sample and facing problems. in some previous posting regarding "compilation of ipdetect" , it has been told that "using compiler that comes with new "Windows DDK" and using "Windows ME Build Environment" it is possible to create 16bit ipdetect.exe. But when i try the same configuration, it is asking for c1xx3216.exe which is not present in ddk bin dirs. We don't have MSVC1.52c .. i dont know where to find this file. can anybody help Thanks in advance jyotsna Tag: How to make Serenum sit on the top of virtual serial port driver? Tag: 34286

Hello,

We have implemented virtual serial ports based on toaster
sample, but when use serenum instead of the toaster upper
filter driver, the installation is hang up.

Please help.

Top

Re: How to make Serenum sit on the top of virtual serial port driver? by Eliyas

Eliyas
Fri Oct 24 12:47:09 CDT 2003

You have to hook up a kernel-debugger and find out where it's hanging.

--
-Eliyas
This posting is provided "AS IS" with no warranties, and confers no rights.
http://www.microsoft.com/whdc/hwdev/driver/kb-drv.mspx

Top

Re: How to make Serenum sit on the top of virtual serial port driver? by Guan

Guan
Tue Oct 28 03:57:11 CST 2003

Thanks, i will try to find out from there.
>-----Original Message-----
>You have to hook up a kernel-debugger and find out where
it's hanging.
>
>--
>-Eliyas
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>http://www.microsoft.com/whdc/hwdev/driver/kb-drv.mspx
>
>
>.
>

Top