XP64 -does not load Windows Defender (Beta 2) spyware detector -

TheMSsForum.com: The Microsoft Software Forum

The MSS Forum ‹ Drivers
- Archive
  - Biz
  - MCSE
  - CRM
  - Drivers
  - Framework
  - ADO
  - ASP
  - Compact
  - Forms
  - Dotnet
  - C#
  - VB
  - FontpageGen
  - Excel
  - WorkSheet
  - Exchange
  - Setup
  - Fox
  - Fontpage
  - ASP
  - IIS
  - Entourage
  - Money
  - Messanger
  - PocketPC
  - Powerpoint
  - Project
  - Publisher
  - Excel
  - VB
  - Security
  - Portal
  - Services
  - SQLServerDev
  - SVCS
  - SQLServer
  - VB
  - VC
  - MFC
  - ExcelGen

- Previous
  - 1
    - WDF 1.0 PCIDRV.sys and NDISEDGE.sys will not load I built pcidrv.sys and ndisedge.sys with Winddk Longhorn x86 checked environment, plus set_wdf_env.cmd and kmdf\inc. Then installed them with the netdrv.inf and wdf**.dll co-installer in vista Beta2. However, both drivers cannot be loaded and the device manager error code is #37, "Windows cannot initialize the device driver for this hardware." No any event log associated with those failure either. Can any Microsoft expert duplicate the problem ? or I missed anything during build or install ? Thanks for any advice. -Gary Li Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76863
  - 2
    - Mobo Procomp (BS61M ver.1.0 socket 370) Hi to all, i'm searching for the win98 driver (video and sound on-board) of Procomp (BS61M ver.1.0 socket 370), in subject. tanks to all. Matteo Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76858
  - 3
    - assembly routine return values in which regs?? Folks, For IA32 assembly code, the return values from routine will be stored in ECX & EAX registers..... For AMD64 assembly code, will the return values be stored in RCX & RAX registers? Also, (in AMD64) if the routine just need to return single byte, then would it just need to store it in AL register (& word means AX, DWORD means EAX and so on)?? -- ++Sathya Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76854
  - 4
    - unidrv plugins and dialog boxes I have been having difficulty trying to determine where it is possible to display a dialog box from a unidrv plug-in. From what I read in the documentation it appears as though both UI and rendering plugins run in the application's context, before anything is sent to the spooler. If this is indeed the case I would assume that it would be possible to display a dialog box to capture document specific properties during EnablePDEV processing in a rendering plug-in. This would allow me to capture things like fax #s for each document by displaying a dialog to the user who started the job. I further assume that the dialog box would appear in a particular user's termnal services window. Are my assumptions correct or am I completely out to lunch? If I am out to lunch what would be the easiest way to capture fax #s for each individual document in a terminal services environment? Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76853
  - 5
    - MONITOR_INFO_2 What are the values pEnvironment member of MONITOR_INFO_2 can take today? The below is from the documentation, which I beleive is old. What about 64 bit systems(itanium and AMD)? pEnvironment Pointer to a null-terminated string that specifies the environment for which the monitor was written (for example, Windows NT x86, Windows NT R4000, Windows NT Alpha_AXP, or Windows 4.0). -- Vipin Aravind http://www.explorewindows.com Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76852
  - 6
    - Word crashes with my printer driver, but no other programs do. Hi, I'm developing a printer driver UI based on the MSPLOTUI sample from the DDK. It works great from all applications except Word, which craches. It seems that Word is calling some functions on the driver that the other programs don't. Can anyone give me a list of the printer driver functions that Word calls, and the order they are called? /Erik Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76851
  - 7
    - Large Transfer Lengths With SCSI Pass-Through? Is it possible to make transfer larger then 64KB via SCSI Pass-Through? If so how is the best way to go about it? If this is SCSI HBA dependent how can you tell the maximum transfer length size allowed? I looking to test up to 16MB transfers. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76849
  - 8
    - Write a WDM driver Hi, I wanted to write a Mouse filter driver which will intercept the mouse click and trigger the user applications like those in the logitech , but not their own.. i wanted to invoke my own applicatoins. I have tried to write the mouse driver but got stuck.. I am stuck at this point as what approach I should take? If I should take the HID class help or what ... ? I have fair understanding of the WDM but not done any fillter drivers... I want to the driver on the machines and configure the mouse to open my application intercepting the mouse clicks.. I would really appreciate if anybody gives me the proper direction on designing the driver.. thanks. -- Abhijit. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76848
  - 9
    - installing a driver using devcon hello, i have a weird behavior i don't understand - i'm using devcon in order to install a software driver. when i put the sys and inf file in any folder (even hidden) everything is ok, but when i put them in the c:\windows\inf file there is a pop up asking for the sys file (and when i direct it to the inf folder it installs it). why is that? how do i solve that? thank you, Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76847
  - 10
    - Causes of USBD_STATUS_ISO_NOT_ACCESSED_BY_HW Greetings, I realize in my previous post "NEC B1 HC chokes with full BW USB2 ISO IN stream" my primary question was hidden in a flurry of details. Can I be doing something in my USB camera driver to cause the USBD_STATUS_ISO_NOT_ACCESSED_BY_HW error I am seeing with the NEC host controller? The only thing I have heard of that causes this error is URB starvation. That is clearly not the trouble. I am queuing 10 URBs of 32 packets each. Also, the driver works perfeftly under the VIA controller. Is there some subtle error I might be causing that effects the NEC controller but not the VIA one, or is there simply a bug in the NEC controller? Best regards, Tom Udale Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76846
  - 11
    - WDF Driver Install problem Hi, I'm developing a WDF driver for a PCI device. I have written a simple driver and the INF. The INF file seems ok when used with CHKINF. When i install it on the target system (XP checked build 2600) everything looks ok but at the end it simply says the drivers are not installed. Looking in WinDBG reveals the following when the driver installs: InstallDev error = 643 Anyone have any suggestions? Have tried to find information on the error but am having trouble finding anything. Thanks in advance. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76844
  - 12
    - PC as USB device Is it possible that I can design an application running on my PC behave as an USB device to another USB host(running on a SH7727 board)? Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76840
  - 13
    - DDK PCIDRV + NDISEDGE cannot be loaded in Vista B2. I built the winddk samples of pcidrv and ndisedge in longhorn x86 build environment of winddk, and used the netdrv.inf to install them in Vista Beta2. ndisedge.sys is loaded as the upper filter driver of pcidrv, and the DriverEntry() is called. However, the MPInitialize() never been called, instead, MPUnload() in ndisedge.sys is called and the filter driver is unloaded. pcidrv.sys itself is working Ok. Anyone has suggestion what I did wrong ? build or install ? or the ndisedge.sys itself has problem ? Thanks in advance. -Gary Li Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76831
  - 14
    - Q) What's better way.(Using DriverStudio from Compuware or Win DDK sample source code) Subject : What's better way.(Using DriverStudio from Compuware or Win DDK sample source code) Hello every one, I have a DriverStudio that has a feature to generate a Driver source code automatically. Is it better way to adapt a source code from DriverStudio not from Win DDK sample source code? Please share your experience or your suggestion. Detail experience will be more appreciate. Thank you. // Daum Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76829
  - 15
    - help! driver driver for: Scanner TRUST IMAGERY 4800 EASY for WINDOWS XP porta parallela grazie Mark Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76822
  - 16
    - NTFS writing I have a device that supports writing in 64K blocks only. To write say 4096, I need to read 64K, update 4096, then write 64K. This causes significant performance degradation with NTFS. Is there any way, like reporting certain geometry or whatever, to make NTFS send bigger write chunks to the device whenever possible, especially when updating MFT? Thanks! Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76820
  - 17
    - NEC B1 HC chokes with full BW USB2 ISO IN stream Greetings, I have tracked down a bug that looks for all the world like it is caused by the NEC B1 HC on the Adaptec USB2 PCI interface card I have. The host is a MP Athlon system running XP SP1 with the Adaptec card using the NEC B1 EHCI controller and a separate VIA EHCI controller on the mobo. Both controllers are using the Microsoft usbehci.sys driver version 5.1.2600.1243. When running a full bandwidth ISO stream from a USB camera (3072 bytes/microframe), the NEC controller chokes with USBD_STATUS_ISO_NOT_ACCESSED_BY_HW (c0020000). It does it horribly when running on a MP boot. If I run on a UP boot of the same machine (same HC driver), it is still there but not as bad. Now if I switch the camera over to the VIA controller, everything else I think exactly the same, the error goes away entirely. It is gone on both the MP and UP boots. Before I checked the VIA HC, I thought it was the camera being too slow and not responding to the IN token in enough time. But after seeing the difference with the VIA HC, I looked a little more carefully and saw on my bus analyzer that indeed the IN token is never sent. So it is clearly on the host end. It is always the third transaction in the microframe that fails; after two successful transactions. I was really surprised that a HC would fail like that. I looked online to see if there were any known troubles with that particular HC, but I did not see anything. Anyone have any ideas?? Best regards, Tom Udale Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76819
  - 18
    - Device IO / Detect Drive Type HI My application needs to directly modify an attached Flash Device. (own FS on it) I am using physicaldive[nn] to open and DeviceIO(IOCTL_DISK_GET_DRIVE_GEOMETRY_EX) to detect the size of the card. (using the member "DiskSize") Is there a way to detect the drive's "type" in more detail ? I already have the information that it is a "removable" one, but I'd like to make 100% sure that it is a FLASH type. Are there any documened calls to retrieve more information about a given drive ? Or can I wrap an ATA Info command in an ordinary DeviceIO call ? TIA w.b. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76811
  - 19
    - IRQL in TDI filter dispatch functions Hi I'm developing a TDI filter driver. a. According to the MSDN, IoCallDriver() can be called at IRQL <= DISPATCH_LEVEL. Therefore, should I assume that it is possible for all dispatch routines in my TDI filter to run at IRQL = DISPATCH_LEVEL? (According to MSDN this rule is right for all kinds of filter drivers?) b. My completion routines are being invoked in an arbitrary thread context and probably at high IRQ. Is this also right for a TDI filter? c. When code can run at IRQL => DISPATCH_LEVEL, all the allocations on the STACK also need to be none paged? (Do I need to use paged_code macro or something like that?) Thanks. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76810
  - 20
    - Windows CE USB Driver Hello togehter! I want to develop an USB driver for an PDA with Windows CE, has anybody Tutorials/samples or experiences with this. I'm grateful for every help. thx chris Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76808
  - 21
    - manual install driver for pnp device I need to run a batch or a exe from inno setup(something like installshield) to install drivers for a Pnp usb device with FTD2XX drivers from FTDI. Now from a batch i call: C:\WINDOWS\System32\rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 .\ftd2xx.inf and i can successfully see the install dialog appear, all the drivers files are copyied in the right places, oemxx.ing is created, but when i plug in the device the same dialog appear and i need to reinstall drivers again in order to make it work. I noticed that after the batch, in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\ there is no Vid_0403&Pid_6001 key as expected So how can i full manually install this device without interaction with the user? Hi Andrea Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76807
  - 22
    - Communication via USB I am developing virtual console for a hardware board. it is supposed to work as a LCD for a target board. This would enable boards without LCD support to display on the desktop.The design is ready. Now shall I use TCP/IP for communication or the USB port.The advantage with USB approach is that every board has it whereas TCP/IP may not be implemented on every board. How should I start? Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76804
  - 23
    - serial port pci card generic driver wanted Hello I have installed this card one year ago without any problem yesterday I formatted my hard disk when starting windows xp home, my pci card, with 2 serial ports is not recognised (generic, standard) I can't find my driver, if I had one can any one help to find this driver ? thank you in advance Philippe (France) Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76802
  - 24
    - How to get started with creating a virtual filesystem? I would like to create a new virtual volume with a virtual filesystem, something that is visible as a drive, can be given a letter, and browsed in "explorer" etc., but where all requests to access files are handled by me, preferably delegated to a service in user space. What kind of component do I actually need to write, at a minimum? If I understand well, I would need to somehow create a fake volume and tell Windows (I/O manager?) about it, register my own filesystem and make Windows forward all requests to this fake volume to my filesystem instance, with which I would interact via ioctl. Is that correct? Could it be simpler? Is there a way to get there even faster with WDF? How about UMDF, does it have support for this sort of functionality? Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76789
  - 25
    - writing to the event viewer hello, i'm trying to write messages from my network driver in the event viewer using NdisWriteErrorLogEntry. in the driver i have the code: NdisWriteErrorLogEntry(Adapter->AdapterHandle, NDIS_STATUS_MEDIA_DISCONNECT, 1,0x001b); i also wrote a resource only dll with the entry 0x001c and an error string. i've modified the inf file to use that dll - the inf file copies it and in the AddEventLog.reg i've added it. but still, when i look in the event viewer i see a discription that says: "The description...cannot be found...use the /AIXSOURCE=flag....." but in the data i see my error code number. what am i doing wrong? Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76786
- Next
  - 1
    - Device Object Hello I got a function now that is executed on the following line: DriverObject->MajorFunction[IRP_MJ_DEVICE_CONTROL] = FilterDispatchIo; NTSTATUS FilterDispatchIo( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp ) In this function the DeviceObject is a ControlDeviceObject or a the main DeviceObject. When it's a DeviceObject is passed through to another function that's passing the IRP to the lower driver. If it's a ControlDeviceObject it's going to look if something is send from the user application. In this check im looking if my own made IOCTL is send or not, if so i want to add an mousepackage. The problem is i need to main device to send the package to but at this moment i get the ControlDeviceObject all the time. I also tryed to save the address of the Main DeviceObject and use it when i needed to enter the package, but i think that isn;t even possible since maybe it has something to do with the Passing through of the IRP and the completion of it(what maybe would explain the error)? I tryed alot of things now and i im stuck now, can anyone help me on the right way in getting the Main Device Object so i can add my own package? btw the error that i got all the time was DRIVER_IRQL_NOT_LESS_OR_EQUAL. PCONTROL_DEVICE_EXTENSION deviceExtension; ULONG dwDataWritten = 0; KIRQL prevIrql; MOUSE_INPUT_DATA data[2]; ULONG inputConsumed; if(DeviceObject != ControlDeviceObject) { return FilterPass(DeviceObject, Irp); } deviceExtension = ControlDeviceObject->DeviceExtension; if(!deviceExtension->Deleted) { status = STATUS_SUCCESS; irpStack = IoGetCurrentIrpStackLocation (Irp); switch (irpStack->MajorFunction) { case IRP_MJ_DEVICE_CONTROL: switch (irpStack->Parameters.DeviceIoControl.IoControlCode) { case IOCTL_MY_OWN_IOCTL: status = Ioctl_BufferedIo(Irp, irpStack, &dwDataWritten); if (status == STATUS_SUCCESS) { inputConsumed = 0; data[0].UnitId = 0; data[0].Flags = MOUSE_MOVE_ABSOLUTE; data[0].Buttons = 0; data[0].RawButtons = 0; data[0].LastX = 0; data[0].LastY = 0; data[0].ExtraInformation = 0; data[1].UnitId = 0; data[1].Flags = MOUSE_MOVE_ABSOLUTE; data[1].Buttons = 0; data[1].RawButtons = 0; data[1].LastX = 0; data[1].LastY = 0; data[1].ExtraInformation = 0; KeRaiseIrql(DISPATCH_LEVEL, &prevIrql); (*(PSERVICE_CALLBACK_ROUTINE) deviceExtension->UpperConnectData.ClassService)( deviceExtension->UpperConnectData.ClassDeviceObject, &data[0], &data[1], &inputConsumed); KeLowerIrql(prevIrql); } break; default: status = STATUS_INVALID_PARAMETER; break; } default: break; } } else { status = STATUS_DEVICE_REMOVED; } Irp->IoStatus.Status = status; Irp->IoStatus.Information = dwDataWritten; IoCompleteRequest (Irp, IO_NO_INCREMENT); return status; } Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76773
  - 2
    - Monitoring WWAN OIDs Through NDIS IM Driver Is there a way for an IM driver to monitor WWAN OIDs? My IM driver binds to NDISWAN but is only able to see WAN OIDs and indications. Thanks! Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76768
  - 3
    - Monitoring TAPI OIDs Through NDIS IM Driver Is there a way for an IM driver to monitor TAPI OIDs/indications? My IM driver binds to NDISWAN but is only able to see WAN OIDs and indications. Thanks! Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76767
  - 4
    - drivers for embedded graphics Hello. Anyone know anything about embedded VIA UniChrome chips? I want to run NT4 server on a CLE266 board with embedded UniChrome 3D. I don't care about 3D or video accelleration, but I do want something more than 640x480x4 resolution. VIA doesn't have an NT driver for the CLE266 board, but I did find an NT driver for an M400 board with embedded UniChrome Pro. Could that driver be used to set display resolution? (A VIA tech suspected 'no' but was not certain.) Barring that, how difficult would it be to develop an NT driver that provided no chip-specific functionality besides mode change? thanks, nf Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76766
  - 5
    - Max contiguous memory buffer size Hi! I have a Windows 2003 Server x86 64bit running on system with 16Gb memory. How much contiguous memory can I allocate for device DMA buffer? Device is the PCI-x adapter with 64bit address bus. I want to get 4Gb DMA buffer. Are there any reccomendations to tune operationg system for getting maximum size DMA buffer? Thanks! Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76762
  - 6
    - EngMapFile I have a mirror display driver that uses a memory-mapped file to push screen updates to an application that reads the updates from the file and sends them to a server for distribution. The user-level application creates the file and passes the name to the driver. The Driver uses EngMapFile to open it. Sometimes it fails and the application retries using a smaller size until it succeeds or reaches a minimum size and fails. I am guessing that EngMapFile fails because it uses non-paged system memory to back the memory-mapped file and since this is a limited resource there may not always be enough available for the full size of the file. Can someone verify this for me? The documentation for EngMapFile is very minimal. Thanks, Bill Wyatt, Sonexis, Inc. Tewksbury, Massachusetts. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76751
  - 7
    - WPP tracing produces empty .etl file <apology> First, let me apologise if you are reading this twice. I posted this originally to the win32.programmer.kernel newsgroup before I spotted this one ! I thought this one might be more relevant. </apology> I'm attempting to use WPP tracing in my XP kernel driver. I've followed all the instructions at osronline and in MSDN, but I'm always getting an empty .etl file. I've added the WPP_DEBUG macros and I can see the messages being dumped to DebugView. Does anyone have any idea what I might be doing wrong ? Here is my tracelog -start call tracelog -start wavedrvlog -guid wave_wpp.ctl -flags 0x1 -f wavedrv.etl wave_cpp.ctl contains : d8580821-5d64-541f-aac8-c8dbaf80ea62 wavedrv And, finally, my WPP_DEFINE_CONTROL_GUID WPP_DEFINE_CONTROL_GUID(wavedrv,(E2E85950,7BFF,4ab7,8A0C,A1AD7AC8C1D5), \ WPP_DEFINE_BIT(WAVEDRV_DBG_ALL) ) I am concerned that tracepdb produces 2 .tmf files that do not match my GUID. Is this normal ? I do get a .tmc file which has the correct GUID. When I run tracefmt, it says it is using default.tmf and finished with Exit Status 38. I can't find any information regarding this exit status ! What does it mean ? Why is it using the default.tmf instead of my tracepdb versions ? For completeness, here is my tracefmt call tracefmt -o wavedrv.txt -f wavedrv.etl -p c:\tmf ("c:\tmf" does contain my .tmf files) After sorting my build problems out the other day, this has started to frustrate me even more. Am I missing something obvious ?? - WinDDK 3790 - W2k3 Checked Build Environment Thanks for ANY help/advice you can offer Cheers Ged Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76750
  - 8
    - Direct I/O Hello ! I've an old software (for win95 & 98) who accessing the serial port com for communicate with automatism... But this software is accessing directly to the port com (with IN & OUT C) . With win95 & 98 it's ok, but with nt2000 and xp not. How can i write a driver for intercept I/O from my application and write to serial port com ? Thank you Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76747
  - 9
    - Windows Server 2003 - Removing Reliance On USB/HID I have just recovered a Win2K3 install from an IBM XSeries onto an HP Proliant ML370 G3. Although the XSeries uses PS/2 keyboard/mouse I cannot log into the Proliant unless I use USB devices. This is not usually a problem, but I have 6 of these servers and only 1 USB keyboard/mouse. I could go out and purchase extra kit but I would like to try removing the reliance on USD/HID. Any ideas? D. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76746
  - 10
    - Issue while attempting to retrieve the file object's path name associated with process section Hi All, We encountered a issue while attempting to retrieve the file object's path name associated with process section object after renaming the folder that contains the executable image. File System: NTFS OS: seems like all x32 NT based (2000, XP, 2003 & their SP) Steps to reproduce: 1. Create a new folder named "1" on disk (for example, C:) 2. Copy any executable file (e.g., "test.exe") to the created folder. 3. Execute this application. 4. Exit from this application (e.g., "test.exe"). 5. Rename folder "1" to another name (for example, "2"). 6. Execute the application located in this folder ("2\test.exe") that was executed at step 3. What did we get? The new process is successfully running, however we can't get the correct path name for the section object associated with this process, and also we got the incorrect path name in the PsSetLoadImageNotifyRoutine callback routine (see below example #4). As a result of querying the path name of process section we got: \Device\HardDiskXXX\1\test.exe Instead of expected: \Device\HardDiskXXX\2\test.exe We tried the different methods of getting the path name for the section object associated with the process. All methods, except the reading PEB give the incorrect path name:( Example #1. PSECTION pSection; .... get section for process executable image .... PFILE_OBJECT pSectionFile = pSection->Segment->ControlArea->FilePointer; ObQueryNameString(pSectionFile, ......); Example #2. Use IoQueryFileInformation for file object associated with process section object or use ObOpenObjectByName AND ZwQueryInformationFile for this file object Example #3. Direct scan file object fields and get file path name. Example #4. VOID NTAPI _PsSetLoadImageNotifyRoutine( IN PUNICODE_STRING FullImageName, IN HANDLE ProcessId, IN PIMAGE_INFO ImageInfo) { KdPrint(("Load image: %ws\n", FullImageName->Buffer)); } EXTERN_C NTSTATUS DriverEntry( IN PDRIVER_OBJECT pDriverObject, IN PUNICODE_STRING pRegistryPath) { return PsSetLoadImageNotifyRoutine(&_PsSetLoadImageNotifyRoutine); } Basing on PDB information (ntoskrnl.exe) the unexported function MmGetFileNameForSection that is called before executing load-image callback routine got the invalid path name also. What can Microsoft developers say on this matter? Best regards, Andrey Alekseev Development Team ISV System Safety Ltd. http://www.syssafety.com Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76745
  - 11
    - Read Data from USB Hi all, I have a problem in reading the data packets from USB. I have got the USB from the Vendor(IXXAT) , and implemented the code to return handle for USB using CreateFile(). it is returning the Handle and Device path correctly but the BytesRead variable in ReadFile function is always zero. Can any one help me? I think i have almost reached the endpoint in reading the data. Thanks in advance samaya Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76744
  - 12
    - a dumb HID question Why is the HID API still not part of the Platform SDK? The hid*.h files are only contained in the DDK. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76742
  - 13
    - Unable to delete .sys file Hi All. I had posted this issue some times back. Can any one help me on this? This is the story: My driver is working fine as expected. But I am not able to delete the driver (.sys file) from drivers folder or overwrite it with another version , even after unloading the driver successfully !!!. Each time our custemers have to reboot the machine to do it !! Windows says,someuser mapped section is left, so I don't have the permission to delete it. I can delete the driver if I haven't run any user application on top of it. My driver code always runs and uses NonPaged memory pools. Driver is running on Windows XP machine with all driver verifier options enabled (of course without low memory simulation). It doesn't report any errors while I unload the driver. I could not see any resources left after unloading the driver (used Winobj, winmsd, process explorer etc.). And I haven't run Event Viewer. Can anyone suggest, how the application program can prevent deleting a driver file? Application interacts with the driver only through IOCTLs. It does not know .sys's name. Thanking You, Mohamed Biju Koothrat Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76741
  - 14
    - Cursor size Dear All I do not know how to support 64x64 size cursor for display driver in wince5.0, and need add some code or variable to BSP? Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76739
  - 15
    - USB 2.0 High Bandwidth Iso I am having an issue with a USB 2.0 high-bandwidth iso endpoint. It isn't behaving the way I expect. The descriptor for the endpoint has the maximum bandwidth -- wMaxPacketsize of 0x1400, meaning 1024 bytes with 3 transfers per microframe. I had assumed that I would use this like any other isochronous endpoint, by sending it a series of 1024-byte packets, so that each microframe would consume 3 such packets. However, that does not seem to be what the host controller driver expects. I was VERY surprised to find that USBD_PIPE_INFORMATION.MaximumPacketSize was 3072, not 1024. Further, if I send it a series of 1024-byte packets, I get USBD_STATUS_INVALID_PARAMETER. It looks as though USBD will only schedule one URB per microframe. So why is this a problem? Well, let's say our data is coming in chunks of 2600 bytes, which means 1024 plus 1024 plus 552. We are using an FX2. Our data rate is lower than the maximum bandwidth. When the FX2 gets an IN token but its FIFO is empty, it does not reply. When that happens, I will get a packet with 1024+1024 bytes plus an error, followed by a packet with 552+1024+1024, but those bytes are all packed together. I can't identify the packet boundaries. So, is it a fact that USBD will only schedule one URB per microframe? Or have I missed something? -- - Tim Roberts, timr@probo.com Providenza & Boekelheide, Inc. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76734
  - 16
    - DIFxApp and unsigned driver I'm trying to use DIFxpp.msi to install an unsigned driver of non-WHQL (custom) class. I set the flag in MsiDriverTable to 8, and included the driver files to the corresponding component. But when the installer runs, only INF file is copied to DRIVERSTORE folder, not the SYS file, causing the setup to issue a prompt for SYS file. What could cause that? Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76733
  - 17
    - lib file for AudioEngineBaseAPO.h Hi, I'm trying to link a APO DLL using the February CTP SDK, and is having linking errors to link functions defined in AudioEngineBase.h. Does anyone know which lib file I need to link to? Thanks KS Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76731
  - 18
    - Any white paper or samples on KSPROPSETID_Jack implementation? I'm trying to add Jack description to my audio device so that Vista will be able to display it on the speaker endpoint. Unfortunately, only manage to find the macros and definitions(portcls.h) in the WDK 5308, but not a single sample or doc on it. Thanks! Kenny. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76730
  - 19
    - IOCTL_INTERNAL_MOUSE_CONNECT Hello I already got a working IOCTL that gives me the info i need from my user application. And now i want that every time i send my own IOCTL with an x and y values for the mouse to execute the mouse_callbackfunctie and insert a self made package with the x and y from my IOCTL.. Does it take much time to replace the IOCTL_INTERNAL_MOUSE_CONNECT (located under IRP_MJ_INTERNAL_DEVICE_CONTROL) that triggers the Mouse_Callbackfunction with a own made IOCTL? I get my IOCTL with help of an control device and in that control device i get my data with help of the Home made IOCTL. I hope it's possible to answer. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76727
  - 20
    - IR communication using non standard protocol Hi, I have an electronic device that communicates with my PC (running Windows XP) using infrared communication. The protocol it uses is like this: For instance to get a buffer status the PC can send B\r to the device, and the device will respond with something like B\r00\rOK\r if the buffer is empty. In other words you send the command to the device and it responds with the command, the answer to the request, and "OK". Currently I use an infrared transmitter connected to one of the COM ports in the PC to communicate with the device. In C sharp I have written a program that communicates directly with the COM port the device is connected to: I open the COM port, sends a command to the device, and waits for a response. It works okay but now I also want to use an IR transmitter connected to an USB port! Virtual com ports and IR is not a possible solution in Windows 2000/XP! Is there an IR communication class that makes it possible to write a program that uses the IR interface there is in Windows 2000/XP to communicate with any IR device - regardless of how it is connected to the PC (as long as it just has a driver)? I know there is something like this for (win)socket programming but will that be possible to use in this case/ with the protocol I described? Best regards, Kim Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76722
  - 21
    - STATUS_INVALID_DEVICE_REQUEST from IoGetDeviceObjectPointer Hi, I'm trying to get a pdo pointer to send IRP_MN_READ_CONFIG requests to. For most devices this works fine but for some devices I get STATUS_INVALID_DEVICE_REQUEST. Any idea why? Thanks Hua-Ying Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76717
  - 22
    - How to modify volume/partition/drive name in code When a partition is created from disk management untility, a volume name can be created for it. How can the volume/partition/drive name for a removable storage device like RAMDISK be modified in the code ? Where the information is stored (I could not find it in registry, is it stored in the disk device ? Thanks -Gary Li Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76716
  - 23
    - hid minidriver w2k freeze when setup Hi List, I have an issue, when I setup my HID minidriver under windows 2k, installation process freeze, while everything are OK under windows XP. During setup, after standard IRPs (i.e. start, hid_get_*, etc) minidriver receive a couple of IRP_MN_QUERY_ID ('BusRelations' and 'BusQueryHardwareIDs'), the number of collection it expose (in my case 4). Then it receive 2 IOCTL_HID_READ_REPORT for ping pong IRPs. At this time "new hardware" wizard ask me to click on "finish" button... So do I With Win2k, minidriver get 2 new IRP_MN_QUERY_ID and freeze. In device manager first collection appear this an exclamation mark. At this point I must reboot to unlock. Does something could be wrong in IRP_MN_QUERY_ID handling ? minidriver reply a string like "Vid_1234&Pid_5678" to those IRPs, is that correct ? Or there is something else to do ? note: in IOCTL_HID_READ_REPORT handler, I call IoMarkIrpPending() to the received IRPs and return STATUS_PENDING... Is that correct ? Regards -- Benoit Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76710
  - 24
    - AddPrinterDriverEx with APD_COPY_ALL_FILES to upgrade a driver ? Hello all, I need to be able to update a printer driver when files may be in use. Can someone confirm that when calling AddPRinterDriverEx with the Option APD_COPY_ALL_FILES, Windows take care of drivers files in use and mark them to be moved on reboot ? TIA. Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76709
  - 25
    - BluetoothFindFirstDevice help ! 911 Hi guys, I'm stucked with a bluetooth application. Shortly , my visual c++ 2003 bluetooth code is intended to query for devices nearby (example : my cellphone with bluetooh) I'm using the below code; (my code compiles fine, but when I hit the line, BtHandle = BluetoothFindFirstDevice(&search_param, &btDevInfo); I debug and assume that it will wait for querying devices nearby but it immediately switches to dissambler code; I then toogle another breakpoint to another line below this line and resume from debug , it comes to this line and i see that "BtHandle" returns "unknown value" , as if it doesnot query any devices, something wrong occurs here as much as i understand here. Where am i doing wrong here ? Someone please shed a light upon me due i'm stucked at this point. I'm using built-in Widcomm stack in my Win2003 server. Does it matter for this code to work on different stacks? (Microsoft,Widcomm,Toshiba,etc..) Actually, the application i'm working on is intended to work on any machine with bluetooth whatever bluetooth stack it has ? Where do i have to start from ? This is an urgent call, please some experienced guy, direct me in the right order. Thanks much and Regards Tiger Developer HBLUETOOTH_DEVICE_FIND BtHandle; BLUETOOTH_DEVICE_INFO btDevInfo; BLUETOOTH_DEVICE_SEARCH_PARAMS search_param; memset(&search_param, 0, sizeof(search_param)); search_param.dwSize = sizeof(search_param); search_param.fReturnAuthenticated = FALSE; search_param.fReturnRemembered = FALSE; search_param.fReturnUnknown = TRUE; search_param.fReturnConnected = FALSE; search_param.fIssueInquiry = TRUE; search_param.cTimeoutMultiplier = 20; search_param.hRadio = NULL; memset(&btDevInfo, 0, sizeof(btDevInfo)); btDevInfo.dwSize = sizeof(btDevInfo); device_count = 0; BtHandle = BluetoothFindFirstDevice(&search_param, &btDevInfo); if (BtHandle == 0) { last_error = GetLastError(); printf("\nNo devices found: %d", last_error); BluetoothFindDeviceClose(BtHandle); exit (0); } else { szAccept = 'y'; bContinue = TRUE; while (bContinue) { device_count++; wcstombs(szDeviceName, btDevInfo.szName, sizeof(szDeviceName)); printf("\nFound Device %d : %s", device_count, szDeviceName); printf("\nDevice address %x", btDevInfo.Address.ullLong); if (btDevInfo.fConnected) printf("\n It is connected"); else printf("\n Device is not connected"); if (btDevInfo.fRemembered) printf("\n It is remembered"); else printf("\n Device is not remembered"); printf("\nPress 'y' to accept or 'n' to not accept this device "); szAccept = _getch(); if (szAccept == 'n') { memset(&btDevInfo, 0, sizeof(btDevInfo)); btDevInfo.dwSize = sizeof(btDevInfo); bResult = BluetoothFindNextDevice(BtHandle, &btDevInfo); if (bResult == FALSE) { last_error = GetLastError(); printf("\nBluetoothFindNextDevice returned error: %d", last_error); BluetoothFindDeviceClose(BtHandle); exit (0); } } else bContinue = FALSE; } } Tag: XP64 -does not load Windows Defender (Beta 2) spyware detector - Tag: 76707

Any solution to loading Windows Defender (beta 2) on XP64 ? Error message
said it only works on 32 bit systems. Why doesn't it load in the 32 bit
section?

Seems a little wierd that the Deffender can not be used in XP64.

Top

Re: XP64 -does not load Windows Defender (Beta 2) spyware detector - by Maxim

Maxim
Tue Mar 07 18:24:19 CST 2006

If the product includes drivers - then the vendor must have the 64bit
version of it. 32bit version of such a product cannot be installed on Win64.

--
Maxim Shatskih, Windows DDK MVP
StorageCraft Corporation
maxim@storagecraft.com
http://www.storagecraft.com

"Timothy" <timothy@epr-inc.com> wrote in message
news:OaWVY8hQGHA.1416@TK2MSFTNGP12.phx.gbl...
> Any solution to loading Windows Defender (beta 2) on XP64 ? Error message
> said it only works on 32 bit systems. Why doesn't it load in the 32 bit
> section?
>
> Seems a little wierd that the Deffender can not be used in XP64.
>
>

Top