Hi I got Windows VISTA 64bit, and i cant get the new sata driver (non-RAID)
to work....
which entry would i have to select if i would take the manual way over inf
installation?
the only entries i have in the Device manager are the following:
in
IDE ATA/ATAPI Controller
ATA Channel 0
ATA Channel 0
ATA Channel 1
ATA Channel 1
Standart-Dual-Channel PCI-IDE Controller
Standart-Dual-Channel PCI-IDE Controller
i managed to get the driver in this list...through manual inf-install, took
the second dualchannel controller, first didnt work...
But now PIOmode is the only mode i can choose;((
command queing isnt availabe ;((( (grayed out)
Now my SATA Samsung sp2004c shows up as sp2004c SCSI device in device
manager ?? what means that? i got no raid enabled or raid software installed
as far as i know^^
Btw. i have got this sysconfig:
64-bit AMD CPU
NFORCE 4 Ultra Chipset /ASUS a8ne w/o SLI
2 Gig Corsair
Only SATA Channels 1 is active the others are not needed atm and
disabled in bios->tried to activate, didnt solve the problem
2 CD-Rom Drives on seperate IDE-cables each configed as Master..