Mel Gibson Spanking!

TheMSsForum.com: The Microsoft Software Forum

The MSS Forum ‹ Drivers
- Archive
  - Biz
  - MCSE
  - CRM
  - Drivers
  - Framework
  - ADO
  - ASP
  - Compact
  - Forms
  - Dotnet
  - C#
  - VB
  - FontpageGen
  - Excel
  - WorkSheet
  - Exchange
  - Setup
  - Fox
  - Fontpage
  - ASP
  - IIS
  - Entourage
  - Money
  - Messanger
  - PocketPC
  - Powerpoint
  - Project
  - Publisher
  - Excel
  - VB
  - Security
  - Portal
  - Services
  - SQLServerDev
  - SVCS
  - SQLServer
  - VB
  - VC
  - MFC
  - ExcelGen

- Previous
  - 1
    - Q about sending 10k of data to USB device. Hi, I am writing a KMDF driver to send about 10K data to a USB device. However, the device only has a interrupt pipe, not bulk write pipe. does anyone know what is the right approach in sending the data over? I can use api WdfUsbTargetDeviceSendUrbSynchronously() to send an URB that contains a vendor command after I fill up the urb using its UrbControlVendorClassRequest substructure. But I do not think I can use the same approach in sending data data longer than 8 bytes. I read somewhere that in cases like this, we need to break up the data stream into smaller segments and send them over sequnentially. But I did not find any sample KMDF code in WDF kit for cases like this. The sample available show how to do read/write for device with ISOChronous or bulkwrite pipe present on the device. I would appreciate it if someone can share their thoughts on how to do this. AT Tag: Mel Gibson Spanking! Tag: 94213
  - 2
    - packet format of Dot11ExtSendPacket As document of WDK(RTM 6000) described, "the IHV Extensions DLL calls the Dot11ExtSendPacket function to transmit a packet through the wireless LAN (WLAN) adapter.", and "The IHV Extensions DLL must format the packet data as a complete IEEE 802.11 packet, with an 802.11 MAC header formatted according to the guidelines discussed in 802.11 MAC Header Management.", infact IHV Dll must format packet data as "Dest Ether MAC+Ether Type+Paylaod", otherwise the packet will have wrong format thus the packet can not be sent out. Maybe is the document wrong? Sorry for my poor English. -- best regards Arthur Tu Tag: Mel Gibson Spanking! Tag: 94211
  - 3
    - careers opportunity as device driver coder... in ur opinion, what r the best industries for developing device drivers in Europe? Do u have any advice for a guy who want develop device drivers and he lives in Italy, or in Europe? Tag: Mel Gibson Spanking! Tag: 94202
  - 4
    - careers opportunity as device driver coder... in ur opinion, what r the best industries for developing device drivers in Europe? Do u have any advice for a guy who want develop device drivers and he lives in Italy, or in Europe? Tag: Mel Gibson Spanking! Tag: 94201
  - 5
    - Capi 2.0 - driver for Vista Is there already a driver for Visa wich is working on a PCI ISDN Card with Capi ???? Ruud Tag: Mel Gibson Spanking! Tag: 94199
  - 6
    - NDIS IM driver signing Hi When I'm trying to install my NDIS IM driver in WinXp, I get the "Windows logo program message box" with the "continue" and stop installation buttons. I know that for commercial use, drivers need some kind of license, and I've heard of WHQL and Verisign. Can someone please tell me which one of the licenses does NDIS IM need? Is Verisign should be enough? Thanks. Tag: Mel Gibson Spanking! Tag: 94193
  - 7
    - How to modify the soundcard buffer? Hi all, I'm writing a Filter Driver which is attached into sysaudio device. I'm able to catch the IRP_MJ_WRITE and IRP_MJ_READ. Now how to modify the DMA buffer of the sound and then pass it to the lower device? My code snippet NTSTATUS AudioFilter_Write(PDEVICE_OBJECT DeviceObject, PIRP Irp) { NTSTATUS NtStatus = STATUS_BUFFER_TOO_SMALL; PAUDIO_FILTER_EXTENSION pAudioFilterDeviceContext = (PAUDIO_FILTER_EXTENSION)DeviceObject->DeviceExtension; PIO_STACK_LOCATION pIoStackIrp = NULL; PCHAR pReadDataBuffer; DbgPrint("AudioFilter_Write Called \r\n"); pIoStackIrp = IoGetCurrentIrpStackLocation(Irp); pReadDataBuffer = MmGetSystemAddressForMdl(Irp->MdlAddress, NormalPagePriority); AudioFilter_ClearBuffer(pReadDataBuffer, (UINT)MmGetMdlByteCount(Irp->MdlAddress)); IoSkipCurrentIrpStackLocation(Irp); NtStatus = IoCallDriver(pAudioFilterDeviceContext->pNextDeviceInChain, Irp); DbgPrint("AudioFilter_Write Exit 0x%0x \r\n", NtStatus); return NtStatus; } NTSTATUS AudioFilter_ClearBuffer(PUCHAR pString, UINT uiSize) { NTSTATUS NtStatus = STATUS_SUCCESS; UINT uiIndex = 0; PCHAR data = NULL; PAGED_CODE(); DbgPrint("AudioFilter_ClearBuffer...\n"); while (uiIndex < (uiSize - 1)) { if (pString[uiIndex] != 0) pString[uiIndex] >>= 1; DbgPrint("%d ", pString[uiIndex]); uiIndex++; } DbgPrint("\n"); return NtStatus; } Thanks, Hieu Tag: Mel Gibson Spanking! Tag: 94186
  - 8
    - selectively bind a NDIS IM hi. i am currently developing a NDIS IM and i want to bind it to only one specific underlying adapter. the adapter is chosen at the user-level control program (it's okay if this operation requires administrative rights). problem is, at the very moment i install the IM, NDIS binds it to all adapters. i'm currently installing it through INF files. some people told me to try the CreateService() API function, but it doesn't seem to work (apparently it gets created alright, but when i try to start it, StartService() returns 0 (false = failure), and the subsequent GetLastError() gives 0 (no error)). the CreateService() solution seems to be a better one, because i can first start the driver, then tell it which interface to bind to (via IOCtl, for example), and it will register with NDIS only at this moment, refusing all the bindings except the desired one. from out the following two questions, EITHER one might be helpful. Q1: can i not register with NDIS in the driver's DriverEntry() function, and follow the INF installation? Q2: how should i correctly register the IM driver with CreateService()? thanks in advance. -- vv Tag: Mel Gibson Spanking! Tag: 94181
  - 9
    - Safely removing USB stick - problem Running Vista 64 bit Ultimate release. Can't get Vista to properly stop the USB pin drive. When selecting to "Safely Remove Hardware", the correct dialogue windows pops up, I select Stop, confirmation window displays to stop the device, I select OK and the dialogue tells me it' safe to remove the USB pin drive. However the USB pin drive LED is still lit suggesting the device is truely not safe to remove. Anyone else seeing this? I guess the only work around is to shut the system down and remove the pin drive. Hopefully this gets fixed in Service Pack 1. -- RaXeT Tag: Mel Gibson Spanking! Tag: 94175
  - 10
    - Unable to start SCSISCAN.SYS on Vista On Windows XP we install our SCSI scanner with a "stub" INF file that does not load any drivers. The only thing it does it get the scanner into the device manager under Imaging Devices. Then we find it and use SCSI pass through. No STI or WIA. That does not work on Vista. We tried loading SCSISCAN.SYS in our INF file. SCSISCAN.SYS loads but cannot start. Vista successfully sends 12 SCSI inquiry commands to the scanner at startup and when we Scan for Hardware Changes. We never get the New Hardware Found dialog. Should we get a New Hardware Found dialog because Windows gets SCSI Inquiry data from our scanner, even with no INF file installed? Why do we have to load SCSISCAN.SYS in our INF file in Vista but not in XP? Any ideas why SCSISCAN.SYS loads but does not start? Could this be a security/permissions problem? Do we have to write a STI or WIA driver to use SCSI pass through on Vista? Here is our INF file: [Version] Signature = "$CHICAGO$" Class = Image ClassGuid = {6bdd1fc6-810f-11d0-bec7-08002be2092f} Provider = %Xerox% [Manufacturer] %Xerox%=Xerox, NTx86 [Xerox.NTx86] %DI665S% = Xerox.SCSISection, SCSI\ScannerXerox___DocuImage_665S__ [SourceDisksFiles] scsiscan.sys=3426 [DestinationDirs] DefaultDestDir=10,system32\drivers Xerox.SCSI.CopySys32Files=10,system32\drivers [Strings] Xerox="Xerox" DI665S="Xerox DocuImage 665S Scanner" scsiscan.SvcDesc= "SCSI Scanner Driver" [Xerox.SCSISection] CopyFiles=Xerox.SCSI.CopySys32File AddService=scsiscan, 0x00000002, Xerox.ScsiScan.AddService [Xerox.SCSISection.Services] AddService=scsiscan, 0x00000002, Xerox.ScsiScan.AddService [Xerox.SCSI.CopySys32Files] scsiscan.sys [Xerox.ScsiScan.AddService] DisplayName = %scsiscan.SvcDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\scsiscan.sys LoadOrderGroup = Base Tag: Mel Gibson Spanking! Tag: 94170
  - 11
    - Debugging USB device Hello, I'm an embbedded software developer, trying to implement an USB HID keyboard. I've found many HID samples for various microcontrollers, and I'm OK with the basis : I can have my device enumerate properly, claimed by hidclass.sys driver, and available to user-land application. This is almost perfect, but my goal is to make a "standard" keypad to be used as input device in any application, and not a vendor-specific device. Now my problem is, as soon as I claim being to USB HID keypad (and of course provide the appropriate descriptor, as found on the specification and in a few samples), Windows stops my device and marks it as invalid (with error code 10). Note that when I remove the "keyboard" part of the descriptor to keep only the "LED" part (CAPS LOCK, NUM LOCK, SCROLL LOCK), the device is marked OK, and any change in main keyboard status is correctly forwarded to my board. So, my question is, how can I find what's wrong in my keyboard descriptor ? Is it possible to have hidclass.sys providing detailed report on what's going wrong, or is there a analysis software that may help ? Regards, -- johann.d Tag: Mel Gibson Spanking! Tag: 94164
  - 12
    - RegisterDeviceNotification on Vista x64 I have a Win32 Service App, which registers an opened device handle for removed check. This App works fine in XP-x64. but not in Vista-x64. The Vista-x64 send the SERVICE_CONTROL_DEVICEEVENT / DBT_DEVICEREMOVECOMPLETE with the value in the DEV_BROADCAST_HANDLE parameter : dbch_size --> sizeof(DEV_BROADCAST_HANDLE) dbch_devicetype --> DBT_DEVTYP_HANDLE dbch_handle ---> NULL dbch_hdevnotify ---> NULL This makes me to have no way to determent which handle I registered has been removed. Is there anyway to solve this problem? Tag: Mel Gibson Spanking! Tag: 94155
  - 13
    - trying to install a minifilter without INF file Hi, Yes I know I should have an INF file, but that is another story. I'm trying to load my minifilter driver on XP 2003 Server. I'm using SCM to get loaded and this is working , my driver is getting loaded. In the DriverEntry I am failing when I call FltRegisterFilter() I am getting error 0xC0000034. I figure that this must be because of register settings? Can someone tell me exactly what the settings should be for my minifilter? TIA -- Gak - Finecats Tag: Mel Gibson Spanking! Tag: 94154
  - 14
    - .kdfiles with boot start drivers on Vista Anyone been able to use .kdfiles -m in WinDbg with boot start drivers on Vista? After much wailing and gnashing of teeth I am thinking it can't be done. Anyone? I have seen some posts on this but they all either go no where or the people replying didn't read very well. Here is what I have tried. I tried using bcdedit to turn on the boot debugger. Here is my output from WinDbg: Waiting to reconnect... BD: Boot Debugger Initialized Connected to Windows Boot Debugger 6000 x86 compatible target, ptr64 FALSE Kernel Debugger connection established. Symbol search path is: From the kd prompt I set >sxe ld:mydriver.sys and the debugger promptly broke after all of the boot start drivers had been loaded?? The .kdfiles mapping to my driver never kicked. I am connecting WinDbg via NULL modem cable COM1 115200 baud. I also tried loading a checked build of WinLoad.exe...still no love. I can't seem to get the debugger to hook during boot. HELP? Anyone? I have seen several veteran driver devs ask this same question with no real help. If it isn't possible, it would be nice of someone to just say so. In my case this would sure save me a butt-load of time. Thanks. Bill M. Tag: Mel Gibson Spanking! Tag: 94150
  - 15
    - File attributes not preserved on copy Hi, I am working on a filesystem driver. I have a weird problem while copying files from an NTFS volume to my volume. After the file is copied, Windows sends an IRP_MJ_SET_INFORMATION IRP with FileBasicInformation information class. Now the attributes field in the FILE_BASIC_INFORMATION structure is always zero even if the original file had read only, archive and/or hidden attribute set. So the file attributes are not preserved on copy unlike a copy between two NTFS harddisks or to a floppy disk. Is this expected behaviour? Is there anything the filesystem driver needs to do during driver startup or volume mount to ensure that Windows sets the right file attributes on file copy? Any information is greatly appreciated. Thanks, Priya Tag: Mel Gibson Spanking! Tag: 94132
  - 16
    - Printer installation in Vista I try to install printer driver ( oemdll from WDK ) with AddprinterDriver() function. But I get each time the same error : Error 2. How to add printer driver in Vista ? Tag: Mel Gibson Spanking! Tag: 94127
  - 17
    - Problem regarding WHQL WIA Transfer Test Hi, We are currently developing a WIA 2.0 scanner mini driver. We are using Widariverex sample that comes with WDK as our reference. When we are running WHQL WIA Transfer test we are seeing one assertion to fail. "Assertion: {CC5F18FA-0436-4e78-BB83-1881841FFB8D}, Test Case: Basic Single-Item, good-parameter, cancellation-free download. " But we are able to scan and preview properly from MS default UI. While debugging I saw that "drvAcquireItemData" entry point is also returning S_OK. Can you please guide me whether I am missing any thing in the source execution path? I have copied the contesnts of the WHQL log I got after conducting the test for your reference. / *************************************************************************************************************** 4/17/2007 5:13:36.524 PM Assertion: {CC5F18FA-0436-4e78- BB83-1881841FFB8D}, Test Case: Basic Single-Item, good-parameter, cancellation-free download. Message 4/17/2007 5:13:36.524 PM Case 1 Message 4/17/2007 5:13:36.524 PM Transfer Awaiting Start Message 4/17/2007 5:13:36.524 PM Parameters: Message 4/17/2007 5:13:36.524 PM Using Primary device Message 4/17/2007 5:13:36.524 PM Item Download Mode Message 4/17/2007 5:13:36.524 PM unsignedVT = 0x0 Message 4/17/2007 5:13:36.524 PM Selected Format GUID {B96B3CAB-0728-11D3-9D7B-0000F81EF32E} for transfer Message 4/17/2007 5:13:36.524 PM GetNextStream Executing Message 4/17/2007 5:13:36.524 PM Parameters: Message 4/17/2007 5:13:36.524 PM lFlags = 0x0 Message 4/17/2007 5:13:36.524 PM bstrItemName = Flatbed Message 4/17/2007 5:13:36.524 PM bstrFullItemName = 0000\Root\Flatbed Message 4/17/2007 5:13:36.524 PM GetNextStream Action Will Be: Message 4/17/2007 5:13:36.524 PM Run Normally Message 4/17/2007 5:13:36.524 PM TransferCallback Executing Message 4/17/2007 5:13:36.524 PM Parameters: Message 4/17/2007 5:13:36.524 PM lFlags = 0x0 Message 4/17/2007 5:13:36.524 PM lMessage = 0x1 Message 4/17/2007 5:13:36.524 PM lPercentComplete = 0 Message 4/17/2007 5:13:36.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:36.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:36.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:36.524 PM Run Normally Message 4/17/2007 5:13:36.524 PM TransferCallback Executing Message 4/17/2007 5:13:36.524 PM Parameters: Message 4/17/2007 5:13:36.524 PM lFlags = 0x0 Message 4/17/2007 5:13:36.524 PM lMessage = 0x1 Message 4/17/2007 5:13:36.524 PM lPercentComplete = 0 Message 4/17/2007 5:13:36.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:36.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:36.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:36.524 PM Run Normally Message 4/17/2007 5:13:43.524 PM TransferCallback Executing Message 4/17/2007 5:13:43.524 PM Parameters: Message 4/17/2007 5:13:43.524 PM lFlags = 0x0 Message 4/17/2007 5:13:43.524 PM lMessage = 0x1 Message 4/17/2007 5:13:43.524 PM lPercentComplete = 10 Message 4/17/2007 5:13:43.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:43.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:43.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:43.524 PM Run Normally Message 4/17/2007 5:13:44.524 PM TransferCallback Executing Message 4/17/2007 5:13:44.524 PM Parameters: Message 4/17/2007 5:13:44.524 PM lFlags = 0x0 Message 4/17/2007 5:13:44.524 PM lMessage = 0x1 Message 4/17/2007 5:13:44.524 PM lPercentComplete = 20 Message 4/17/2007 5:13:44.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:44.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:44.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:44.524 PM Run Normally Message 4/17/2007 5:13:44.524 PM TransferCallback Executing Message 4/17/2007 5:13:44.524 PM Parameters: Message 4/17/2007 5:13:44.524 PM lFlags = 0x0 Message 4/17/2007 5:13:44.524 PM lMessage = 0x1 Message 4/17/2007 5:13:44.524 PM lPercentComplete = 30 Message 4/17/2007 5:13:44.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:44.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:44.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:44.524 PM Run Normally Message 4/17/2007 5:13:44.524 PM TransferCallback Executing Message 4/17/2007 5:13:44.524 PM Parameters: Message 4/17/2007 5:13:44.524 PM lFlags = 0x0 Message 4/17/2007 5:13:44.524 PM lMessage = 0x1 Message 4/17/2007 5:13:44.524 PM lPercentComplete = 40 Message 4/17/2007 5:13:44.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:44.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:44.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:44.524 PM Run Normally Message 4/17/2007 5:13:45.524 PM TransferCallback Executing Message 4/17/2007 5:13:45.524 PM Parameters: Message 4/17/2007 5:13:45.524 PM lFlags = 0x0 Message 4/17/2007 5:13:45.524 PM lMessage = 0x1 Message 4/17/2007 5:13:45.524 PM lPercentComplete = 50 Message 4/17/2007 5:13:45.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:45.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:45.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:45.524 PM Run Normally Message 4/17/2007 5:13:45.524 PM TransferCallback Executing Message 4/17/2007 5:13:45.524 PM Parameters: Message 4/17/2007 5:13:45.524 PM lFlags = 0x0 Message 4/17/2007 5:13:45.524 PM lMessage = 0x1 Message 4/17/2007 5:13:45.524 PM lPercentComplete = 60 Message 4/17/2007 5:13:45.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:45.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:45.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:45.524 PM Run Normally Message 4/17/2007 5:13:45.524 PM TransferCallback Executing Message 4/17/2007 5:13:45.524 PM Parameters: Message 4/17/2007 5:13:45.524 PM lFlags = 0x0 Message 4/17/2007 5:13:45.524 PM lMessage = 0x1 Message 4/17/2007 5:13:45.524 PM lPercentComplete = 70 Message 4/17/2007 5:13:45.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:45.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:45.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:45.524 PM Run Normally Message 4/17/2007 5:13:46.524 PM TransferCallback Executing Message 4/17/2007 5:13:46.524 PM Parameters: Message 4/17/2007 5:13:46.524 PM lFlags = 0x0 Message 4/17/2007 5:13:46.524 PM lMessage = 0x1 Message 4/17/2007 5:13:46.524 PM lPercentComplete = 80 Message 4/17/2007 5:13:46.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:46.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:46.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:46.524 PM Run Normally Message 4/17/2007 5:13:46.524 PM TransferCallback Executing Message 4/17/2007 5:13:46.524 PM Parameters: Message 4/17/2007 5:13:46.524 PM lFlags = 0x0 Message 4/17/2007 5:13:46.524 PM lMessage = 0x1 Message 4/17/2007 5:13:46.524 PM lPercentComplete = 90 Message 4/17/2007 5:13:46.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:46.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:46.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:46.524 PM Run Normally Message 4/17/2007 5:13:47.524 PM TransferCallback Executing Message 4/17/2007 5:13:47.524 PM Parameters: Message 4/17/2007 5:13:47.524 PM lFlags = 0x0 Message 4/17/2007 5:13:47.524 PM lMessage = 0x1 Message 4/17/2007 5:13:47.524 PM lPercentComplete = 100 Message 4/17/2007 5:13:47.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:47.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:47.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:47.524 PM Run Normally Error 4/17/2007 5:13:47.524 PM Read called on guarded stream File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM Relevant Assertion: File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM WIA drivers must use only the following IStream methods during downloads: Write, Seek, SetSize. WIA drivers must use only the following IStream methods during uploads: Read, Seek, Stat. File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM Read called on guarded stream File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM Relevant Assertion: File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM WIA drivers must use only the following IStream methods during downloads: Write, Seek, SetSize. WIA drivers must use only the following IStream methods during uploads: Read, Seek, Stat. File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM Read called on guarded stream File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM Relevant Assertion: File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM WIA drivers must use only the following IStream methods during downloads: Write, Seek, SetSize. WIA drivers must use only the following IStream methods during uploads: Read, Seek, Stat. File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM Read called on guarded stream File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM Relevant Assertion: File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Error 4/17/2007 5:13:47.524 PM WIA drivers must use only the following IStream methods during downloads: Write, Seek, SetSize. WIA drivers must use only the following IStream methods during uploads: Read, Seek, Stat. File: Line: 0 Error Type: Error Code: 0x0 Error Text: Error 0x00000000 Message 4/17/2007 5:13:47.524 PM TransferCallback Executing Message 4/17/2007 5:13:47.524 PM Parameters: Message 4/17/2007 5:13:47.524 PM lFlags = 0x0 Message 4/17/2007 5:13:47.524 PM lMessage = 0x2 Message 4/17/2007 5:13:47.524 PM lPercentComplete = 0 Message 4/17/2007 5:13:47.524 PM ulTransferredBytes = 0x68CF76 Message 4/17/2007 5:13:47.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:47.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:47.524 PM Run Normally Message 4/17/2007 5:13:47.524 PM TransferCallback Executing Message 4/17/2007 5:13:47.524 PM Parameters: Message 4/17/2007 5:13:47.524 PM lFlags = 0x0 Message 4/17/2007 5:13:47.524 PM lMessage = 0x3 Message 4/17/2007 5:13:47.524 PM lPercentComplete = 0 Message 4/17/2007 5:13:47.524 PM ulTransferredBytes = 0x0 Message 4/17/2007 5:13:47.524 PM hrErrorStatus = 0x0 Message 4/17/2007 5:13:47.524 PM TransferCallback Action Will Be: Message 4/17/2007 5:13:47.524 PM Run Normally End Test 4/17/2007 5:13:47.524 PM Assertion: {CC5F18FA-0436-4e78- BB83-1881841FFB8D}, Test Case: Basic Single-Item, good-parameter, cancellation-free download. Result: Fail Repro: E:\WTT\JobsWorkingDir\Tasks \WTTJobRun6648C66F-90A1-472F-8C83-18476EC8ADB4\WiaTransferTool.exe / *************************************************************************************************************** We are in a critical stage and Your help will be much appreciated. Thanks, Madhu Tag: Mel Gibson Spanking! Tag: 94124
  - 18
    - [OT] OpenProcess shows "Access Denied (5)" on some Processes,.. Hi, can please someone have a look at this: http://groups.google.de/group/microsoft.public.vc.mfc/browse_thread/thread/9a26245c82cd048e/157c9704f05a2860 TIA Best regards Kerem Gümrükcü Tag: Mel Gibson Spanking! Tag: 94123
  - 19
    - Enumerate Child Device Hello All, We are writing a USB-Serial driver using WDF framework. We have completed the USB part i.e handling PnP and Power Management. My problem is i want OS to enumerate a child device probably as Serial device. I want the device manager to show virtual COM port device and USB device. I did the following to achieve this. After the completion of EvtDeviceD0Entry, i have added the following code to enumerate a child device (COM) in EvtDeviceRelationsQuery NTSTATUS EvtDeviceRelationsQuery (IN WDFDEVICE Device, IN DEVICE_RELATION_TYPE RelationType ) { // Initialize UNICODE device name RtlInitUnicodeString(&uniDeviceName, L"\\Device\\SerBus0"); DeviceInit = WdfPdoInitAllocate(Device); // USB device object if (DeviceInit == NULL) { DbgPrint ("WdfControlDeviceInitAllocate failed 0x%x\n", status); status = STATUS_INSUFFICIENT_RESOURCES; } // // Set exclusive to true so that not more than one app can talk to the // control device simultaneously. // WdfDeviceInitSetExclusive(DeviceInit, TRUE); WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_UNKNOWN); WdfDeviceInitSetCharacteristics(DeviceInit, FILE_DEVICE_SECURE_OPEN, FALSE); // // Assign the device name // status = WdfDeviceInitAssignName(DeviceInit, &uniDeviceName); if (!NT_SUCCESS(status)) { DbgPrint ("WdfDeviceInitAssignName failed 0x%x\n", status); return status; } // // Initialize the attributes // WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE (&attributes,DEVICE_CONTEXT); // // Create the control device // status = WdfDeviceCreate(&DeviceInit, &attributes, &serbusdevice); if (!NT_SUCCESS(status)) { DbgPrint (WdfDeviceCreate failed 0x%x\n", status); return status; } status = WdfFdoAddStaticChild(Device, serbusdevice); if (!NT_SUCCESS(status)) { DbgPrint (WdfFdoAddStaticChild failed 0x%x\n", status); return status; } } In EvtDeviceAdd i added the following code after i get the device handle. busInfo.BusTypeGuid = GUID_CLASS_COMPORT; busInfo.LegacyBusType = PNPBus; busInfo.BusNumber = 0; WdfDeviceSetBusInformationForChildren(device, &busInfo); I followed the instructions at the following link. http://msdn2.microsoft.com/en-us/library/aa490110.aspx I dint have any luck in proceeding further. Cany anyone point me if im missing anything, so that windows could enumerate a child device. I want to provide a different INF file for second enumeration. Thank You, Regards, Sushma Tag: Mel Gibson Spanking! Tag: 94121
  - 20
    - Installing Filter driver I am trying to install Filter driver using SetupAPI function as decribed in MSDN. Call SetupInstallFilesFromInfSection for the [upperfilter_inst] section. Call SetupInstallServicesFromInfSection for the [upperfilter_inst.Services] section. Call SetupInstallFromInfSection for the [upperfilter_inst] section, once for each class key it wants to register the upperfilt service for. But I see only registry is getting updated. The actual driver is not get bound to the adapters. How to do that? Tag: Mel Gibson Spanking! Tag: 94120
  - 21
    - MiniportCheckForHangEx vs MiniportCHeckForHang Hi, I am writing an NDIS6 miniport driver. In WDK it is written on MiniportCheckForHangEx do that "If a miniport driver does not complete an OID request within two successive calls to MiniportCheckForHangEx, NDIS can call the driver's MiniportResetEx function." and on MiniportCheckForHang doc that: "If a NIC driver has no MiniportCheckForHang function and NDIS judges the driver unresponsive as, for example, when NDIS holds many pending sends and requests queued to the miniport driver for a time-out interval, NDIS calls the driver's MiniportReset function" 1. If I correctly understand the doc than MiniportCheckForHangEx in contrary to MiniportCheckForHang does not care about pending sends request only pending OIDS. I tested it by pending send requests forever and indeed MiniportReset was not called. Is that the expected behaviour or did I miss something? 2. What is the meaning of "NDIS can call the driver's MiniportResetEx?" are there times that it will not call it ? Thanks Miki Tag: Mel Gibson Spanking! Tag: 94113
  - 22
    - Driver Signing Problem Hallo, For VISTA I have build a signed driver package with a "VeriSign Class 3 Code Signing 2000 CA" ID. Our Rule is using the same package for Windows XP. In Vista the installation is OK but in Windows XP I can see some errors in setupapi.log #E360 An unsigned or incorrectly signed file "c:\windows\inf\oem9.inf" for driver "XXX" will be installed (Policy=Ignore). Error 1168: What is not correct with my signing ? The result: class installer entrys (ICON, name) are not installed in registry and CoInstaller DLL is not running by the installation. When I break this signed package (insert a space into INF file) all is fine. elli Tag: Mel Gibson Spanking! Tag: 94109
  - 23
    - Does anyone use regdmp.exe or objdir.exe? What would be the impact on you if we pulled regdmp.exe and objdir.exe from the WDK? Tag: Mel Gibson Spanking! Tag: 94099
  - 24
    - Can the Media Center source be aquired? We are having a large problem developing a BDA driver. The source of this problem is that the documentation for writing a BDA driver explains what everything does, but not what actually happens in terms of successfully instancing a filter that will be used by Media Center. This makes debugging impossible as very little of our code actually runs before Media Center decides not to acknowledge our device. Is the source code for Media Center available under some license offered by Microsoft? Otherwise, does anyone have a method to successfully diagnose graph building and filter caps problems? Tag: Mel Gibson Spanking! Tag: 94098
  - 25
    - Embedded authenticode signature Hi, I want to sign MyDriver.sys with an authenticode signature appended to the .sys file, just like a normal user mode DLL. The driver is for Server 2003 and Vista, x86 and x64. I realize this will have no effect on the install prompts etc. My question is, will the signature adversely affect the loading of the driver, assuming the checksum is OK? My concern is that the driver loader might be confused by the signature added to the .sys file. Thanks -- Tag: Mel Gibson Spanking! Tag: 94085
- Next
  - 1
    - Help writing virtual webcam driver Hi guys, I'm a newcomer the device driver development discipline. I'm short my project requires me to write a virtual webcam driver - the driver should not interact with any real hardware instead the image input is actually coming from e.g. the network.. I really looking for some pointers - that might push me in the right direction.. I've been reading a bit the last two days and this is how far I've come: 1) I would like to use KMDF - (cannot be done in UMDF correct?). 2) It seems I need to develop a "Video Capture Device" using something called AvStream (Currently I'm not really sure what AvStream does). 3) Are there any good DDK samples that might give me a idea of how to continue. I've looked a bit at the AVSHwS and it seems promising. 4) I found that a webcam driver is classified as an UVC (USB video device class) - Is this the protocol I need to implement in my driver? I really hope you can help me, in answering my initial questions.. All ideas, thoughts are more than welcome :) -- // morten Tag: Mel Gibson Spanking! Tag: 94080
  - 2
    - Problems in Vista with WiFi and Ndis (ndisuio.sys) Hello, I need help for Vista OS. I am updating a program to make connections to Wifi Networks so that it works in Vista. This program work with ndisuio.sys driver or any compatible driver based on NDISPROT sample protocol driver. For this case I stop the Wlansvc as I was doing in XP with the wzcsvc. It work without problems and Vista let me control the WiFi device. These drivers work fine in Vista and the devices I have probed work fine with them. I send these OID=B4s for make a connection: OID_802_11_INFRASTRUCTURE_MODE(0x0D010108) OID_802_11_AUTHENTICATION_MODE(0x0D010118) OID_802_11_ADD_KEY(0x0D01011D) (some times, if the mode needs it) OID_802_11_WEP_STATUS(0x0D01011B) OID_802_11_SSID(0x0D010102) OID_GEN_PORT_AUTHENTICATION_PARAMETERS(0x0001020F) They work well and they are shown by the program ndismon(PCAUSA) also when the system connects. The connection(association) with the AP is Ok and I send the neccesary security protocol (802.1X, WPA-PSK, WPA-PEAP) developed in my program and they work fine with the device and the AP. THE PROBLEM: Up to here, everything seems to work fine but the problem is with the TCP/IP and the new interface added in the system Vista. The new interface does not appear in the window "Network and Sharing Center" and the DHCP protocol does not work over it. The new interfce does not obtain IP address and it does not work although the association with the AP and the authorization and authentication with the WiFi device is Ok. I think that more actions are necessary in order to wake up the interface in the system Vista although I have not been able to find information on the matter. Any help about this issue would be very appreciated. Sorry for my bad English. Best regards, Frank Tag: Mel Gibson Spanking! Tag: 94077
  - 3
    - About driver developing Hello, I'm new to driver authoring and want to know some simple question's answers. 1-WinDDK is enough to develop MS-based device drivers? 2-Do i need/have to know programming languages like c++? 3-Is WDK (or called WinDDK) avaible for download? Sorry for these basic questions but i need to know. Best regards... Tag: Mel Gibson Spanking! Tag: 94071
  - 4
    - avstream avssamp example freeze system Hello. Using matlab+simulink (under mex setup VS2005) as a client application for capturing video from DDK sample avssamp totally freeze windows (Vista, XP). The mouse cursor doesn't move, nothing is move at all. At the same time Avssamp is fine when capturing with Amcap, and fine if matlab mex setup is VS2003.NET, also matlab is fine with vs2005 when captureing from webcamera... Tried using avsamp debug version with dbgPrintf+dbgview - i can't see any out message, system is freezed before any message occurs. Tried run with verifier ON, nothing! Could anybody advise how to debug this strange avssamp behaviour? Thank you. -Andrey Tag: Mel Gibson Spanking! Tag: 94066
  - 5
    - SYS File Format Hello All, Where I can find information about the format of SYS file? What is the different from DLL PE file format? Thanks, Ronen Tag: Mel Gibson Spanking! Tag: 94065
  - 6
    - winusb and WinUsb_ControlTransfer My USB device supports the default control pipe (only) and these requests are made using control transfers. In order to fetch the version from my device, the following vendor specific call is successful: WINUSB_INTERFACE_HANDLE hWinUsbIntf ; UCHAR ucaBuffer[256] ; DWORD dwXeptLen ; : : WINUSB_SETUP_PACKET Wsp = { 0xC3, 0x81, 0x80, 0, 255 } ; BOOL bRC = WinUsb_ControlTransfer ( hWinUsbIntf, Wsp, ucaBuffer, sizeof(ucaBuffer) - 1, &dwXeptLen, NULL ) ; In order to reset the LED on the device, I issue: WINUSB_SETUP_PACKET Wsp = { 0x40, 0x80, 0x40, 0, 1 } ; bRC = WinUsb_ControlTransfer ( hWinUsbIntf, Wsp, ucaBuffer, sizeof(ucaBuffer) - 1, &dwXeptLen, NULL ) ; The vendor specific SetLED fails and the translated GetLastError is "A device attached to the system is not functioning." Shouldn't I be able to write to the device via Winsys as well as read? Tag: Mel Gibson Spanking! Tag: 94064
  - 7
    - KMDF: accessing PCI configuration space results in STATUS_NOT_SUPPORTED I try to access the PCI configuration space of my PCI hardware. I follow the WDK help topic "Accessing PCI Device Configuration Space". As a first step, I try to get a BusInterface, but this fails. I used two different styles (see code below), both result with status = STATUS_NOT_SUPPORTED. I can not see the difference between the PCIDRV example and my own device, so any help is welcome! J. Hoppe, PEAK System Technik GmbH ======= Try #1 (as in example "src/kmdf/pcidrv") : ================ xxxDeviceAdd() { ... ... status = WdfFdoQueryForInterface(Device, &GUID_BUS_INTERFACE_STANDARD, (PINTERFACE) & pDeviceContext->BusInterface, sizeof(BUS_INTERFACE_STANDARD), 1, // Version NULL); //InterfaceSpecificData .... } ======= Try #2 (as in other example / Knowledgebase) ================ // from C:\WinDDK\6000\src\general\pcidrv\sys\hw\nic_init.c NTSTATUS GetPCIBusInterfaceStandard( __in PDEVICE_OBJECT DeviceObject, __out PBUS_INTERFACE_STANDARD BusInterfaceStandard ) /*++ Routine Description: This routine gets the bus interface standard information from the PDO. Arguments: DeviceObject - Device object to query for this information. BusInterface - Supplies a pointer to the retrieved information. Return Value: NT status. --*/ { KEVENT event; NTSTATUS status; PIRP irp; IO_STATUS_BLOCK ioStatusBlock; PIO_STACK_LOCATION irpStack; PDEVICE_OBJECT targetObject; DiagMsg("GetPciBusInterfaceStandard entered."); PAGED_CODE(); KeInitializeEvent( &event, NotificationEvent, FALSE ); targetObject = IoGetAttachedDeviceReference( DeviceObject ); irp = IoBuildSynchronousFsdRequest( IRP_MJ_PNP, targetObject, NULL, 0, NULL, &event, &ioStatusBlock ); if (irp == NULL) { status = STATUS_INSUFFICIENT_RESOURCES; goto End; } irpStack = IoGetNextIrpStackLocation( irp ); irpStack->MinorFunction = IRP_MN_QUERY_INTERFACE; irpStack->Parameters.QueryInterface.InterfaceType = (LPGUID) &GUID_BUS_INTERFACE_STANDARD ; irpStack->Parameters.QueryInterface.Size = sizeof(BUS_INTERFACE_STANDARD); irpStack->Parameters.QueryInterface.Version = 1; irpStack->Parameters.QueryInterface.Interface = (PINTERFACE)BusInterfaceStandard; irpStack->Parameters.QueryInterface.InterfaceSpecificData = NULL; // // Initialize the status to error in case the bus driver does not // set it correctly. irp->IoStatus.Status = STATUS_NOT_SUPPORTED ; status = IoCallDriver( targetObject, irp ); if (status == STATUS_PENDING) { status = KeWaitForSingleObject( &event, Executive, KernelMode, FALSE, NULL); ASSERT(NT_SUCCESS(status)); status = ioStatusBlock.Status; } End: // Done with reference ObDereferenceObject( targetObject ); return status; } xxxDeviceAdd() { ... ... { PDEVICE_OBJECT devobj = WdfDeviceWdmGetDeviceObject(Device) ; status = GetPCIBusInterfaceStandard(devobj, & (pDeviceContext->BusInterface)) ; } .... } =============== end code examples ================= Tag: Mel Gibson Spanking! Tag: 94059
  - 8
    - Debug IEEE 802.1X Does anyone seen this kind of problem before? On what case 802.1x supplicant will create port fail and error code is 13 as below. Good information for debugging 802.1x http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/wlansupp.mspx Environment: Hidden SSID/WPA-PSK [472] 09:22:03:234: Device: \DEVICE\{3AE7D14E-74EC-4F06-B655-20FE661B518C} [472] 09:22:03:234: Description: USB Wireless LAN Card - Packet Scheduler Miniport [472] 09:22:03:234: ElEnumAndOpenInterfaces: Found interface after enumeration \DEVICE\{3AE7D14E-74EC-4F06-B655-20FE661B518C} [472] 09:22:03:234: ElEnumAndOpenInterfaces: Did NOT find PCB already existing for interface [472] 09:22:03:234: ElOpenInterfaceHandle: Opening handle for \DEVICE\{3AE7D14E-74EC-4F06-B655-20FE661B518C} [472] 09:22:03:234: ElOpenInterfaceHandle: Trying to access NDIS Device: \DEVICE\{3AE7D14E-74EC-4F06-B655-20FE661B518C} [472] 09:22:03:234: ElOpenInterfaceHandle: OpenIntfHandle(\DEVICE\{3AE7D14E-74EC-4F06-B655-20FE661B518C}) = 4440 [472] 09:22:03:234: ElOpenInterfaceHandle: BindIoCompletionCallback already done !!! [472] 09:22:03:234: ElOpenInterfaceHandle: Opened handle 00001158 with dwRetCode 0 [472] 09:22:03:234: ElCreatePort: Entered for Handle=(00001158), GUID=({3AE7D14E-74EC-4F06-B655-20FE661B518C}), Name=(USB Wireless LAN Card - Packet Scheduler Miniport), ZCId=(0), UserData=(00000000) Notification=<8> [472] 09:22:03:234: ElCreatePort: No PCB found for {3AE7D14E-74EC-4F06-B655-20FE661B518C} [472] 09:22:03:234: ElGetInterfaceNdisStatistics: pwszDeviceInterfaceName = (\Device\{3AE7D14E-74EC-4F06-B655-20FE661B518C}) [472] 09:22:03:234: ElCreatePort: Ignoring WLAN indications for pZCConnectInfo == NULL ****[472] 09:22:03:234: ElEnumAndOpenInterfaces: Error in CreatePort = 13 <======??? [472] 09:22:03:234: ElCloseInterfaceHandle(0x1158,{3AE7D14E-74EC-4F06-B655-20FE661B518C}) entered [472] 09:22:03:234: ElEnumAndOpenInterfaces: Completed with retcode = 0 [472] 09:22:03:234: ElMediaSenseCallbackWorker: processed, RetCode = 0 Thanks. Tag: Mel Gibson Spanking! Tag: 94058
  - 9
    - WINDOWS CE 5.0 run-time image errors hi all, i am new to this field WIN CE. i'm trying to build CEPC run-time image. But i'm getting errrors like bellow. BUILD: [00:0000001177:PROGC ] Scan \PUBLIC\COMMON\OAK\CSP\X86\GEODE\GXVIDEO\DDRAW\ BUILD: [00:0000001178:ERRORE] CreateDirectory(\) failed. GetLastError=5 (dec). please solve my problem. thanking you. Tag: Mel Gibson Spanking! Tag: 94057
  - 10
    - Vista RTM GDR release Hi, I have seen that the Vista USB driver stack is released in two different versions. The driver stack shipped with the MSDN DVD's is the RTM version: 6.0.6000.16386 (vista_rtm.061101-2205), the version that is now on the market is GDR: 6.0.6000.16400 (vista_gdr.061212-1500). I have done a binary comprision of the driver files. E.g. usbd.sys has only a new data from the compilation and a new version information. But other drivers like usbport.sys differs in more than the version. What is the difference between these versions? Is it required to test kernel mode drivers with both versions? Is RTM the latest beta version? I have got a problem report from a customer. He claims that the driver is not running with GDR that was tested successful with RTM! This problem is still under investigation. Any comments? Thanks Guenter Tag: Mel Gibson Spanking! Tag: 94055
  - 11
    - NDIS6 Miniport not unloaded Hi everyone: I am running an ndis 6 + KMDF Ethernet miniport driver. The miniport controls a USB NIC . I bridged miniport through bridgeMP to another Ethernet NIC. When I am suprisingly remove my device I my MiniportPause is not called and the miniport remains active(checkforhang is keep being called). When I do !stacks 2 ndis I see the following: nt!KiSwapThread+0x36d: nt!KeWaitForSingleObject+0x414 ndis!NdisWaitEvent+0x55 bridge+0xb1d7 bridge+0xb221 bridge+0x1a92 ndis!ndisUnbindProtocol+0x24b ndis!ndisPnPNotifyAllTransports +0x1c8 ndis!ndisCloseMiniportBindings +0x17a ndis!ndisPnPRemoveDevice+0x1ab ndis!ndisPnPDispatch+0x85e nt!IovCallDriver+0x252 nt!IofCallDriver+0x1b nt!ViFilterDispatchPnp+0x120 nt!IovCallDriver+0x252 nt!IofCallDriver+0x1b nt!IopSynchronousCall+0xce nt!IopRemoveDevice+0xd5 nt! PnpSurpriseRemoveLockedDeviceNode+0xbd nt!PnpDeleteLockedDeviceNode +0x1f nt!PnpDeleteLockedDeviceNodes +0x4c nt! PnpProcessQueryRemoveAndEject+0x572 nt!PnpProcessTargetDeviceEvent +0x38 nt!PnpDeviceEventWorker+0x201 nt!ExpWorkerThread+0xfd nt!PspSystemThreadStartup+0x9d nt!KiThreadStartup+0x16 It seems that the bridge is hang on some Event and due to that the miniport is unloaded. Does anyone has any idea how can I further debug it? Thanks Miki Tag: Mel Gibson Spanking! Tag: 94052
  - 12
    - Why WindowsXP does not accept the correct NIC driver? I have a serious problem with my PC. I had to format my disk and reinstall Windows XP (with SP2), but I can not get to in web because Windows thinks that my network card is of Asound, but its of Realtek. I tried doing update driver using the Realtek RTL8139/810X Family PCI Fast Ethernet Card driver on the device manager. I tried uninstalling the driver, and then letting Windows find it again. I tried downloading new driver from the Internet (using another PC). But came out Asound. Windows simply does not let me change the driver. I logged in with Administrator account. I talked with the my ISP service provider, and they also found that the trouble is with my NIC. How can I force Windows use the driver that has on a disk, and not the built-in Asound? ----------- Thanks Sharon Tag: Mel Gibson Spanking! Tag: 94051
  - 13
    - Miniport driver - OID_GEN_SUPPORTED_LIST problem Good morning, I'm developing miniport driver, when I answered OID_GEN_SUPPORTED_LIST query without OID_GEN_LINK_SPEED and OID_GEN_MEDIA_CONNECT_STATUS in the oid list, the adapter connected and setup successfully, when I applied those two oid to the list, the adapter couldn't connect. I hope you will be able to help me, vir0n Tag: Mel Gibson Spanking! Tag: 94050
  - 14
    - Adding More than 3 Printers in Vista, Adding more than 3 LPT's In Hi, Did anyone able to add LPT4 thru LPT9 in windows Vista ? i tried to add LPT4 it says invalid port name till LPT9, but it is accepting LPT10 onwards. Is something wrong in my observation, precisely is my observation valid ??? how to add LPT4 in vista. Note : it has LPT 4, but not LPT4. Thanks and Regards, Neo Tag: Mel Gibson Spanking! Tag: 94049
  - 15
    - Anti-Tampering Verification Hi everyone, I just need to clarify something in DTM regarding this 'Anti-Tampering Verification' that was displayed in DTM when I was preparing my submission package. On the 'Submission Status' window, it shows the following message: Anti-Tampering Verification Verification.wtl File Does Not Exist I search for info on this term on the DTM Help, MSDN and Microsoft website but found none. I don't know what's this message means and whether should it be a cause for concern. I don't want, later on, that because of this I'll have problem with my WHQL submission, as you know it involves some $$$. Anyway, my submission summary shows that my device has pass all the required tests. Anyone knows about this? Thanks! Tag: Mel Gibson Spanking! Tag: 94043
  - 16
    - Could not load Driver dynamically into Vista Kernel... Hi, i have a (simple) 32bit driver that works perfect for Windows 2000 and XP, but i cant load it into a running vista system. Does the driver has to be signed to make it loaddable into vista kernel? If so, how can i sign it with a valid signatur or whatever certificate i have to use,...? TIA Best regards Kerem Gümrükcü Tag: Mel Gibson Spanking! Tag: 94041
  - 17
    - OEMTextOut glyph position problem We are writing a special plotter driver and we are seeing some strange things when we are looking at the GLYPHPOS structures being sent to OEMTextOut call... The glyphs start out their position correctly but at some point we get a negative Y coordinates or the offsets for the Y coordinates restart at low numbers and all text lines are getting mixed. We noticed that it starts happening when Y > 7200 in *PrintableArea: PAIR(7200, 7200) of GPD file We need to support big table sizes 48x48 inches and have to have a good text quality for small fonts so we need to set *DPI: PAIR(1200,1200) *TextDPI: PAIR(1200, 1200) If we set DPI for lower number Windows programs like MS Word, Corel return low quality Text. Setting DPI for low resolution but TextDPI for high resolution doesn't make text better. Are there any limitation on DPI * Y ? Any help would be greatly appreciated. Tag: Mel Gibson Spanking! Tag: 94040
  - 18
    - build utility I'm Building a user mode component modeled on the user component of minispy As I understand this, I need to build this with BUILD tool. The bit that I'm building will be a DLL that will hook up to other stuff... So when I use BUILD and the OSR ddkbuild tool in a very generic way, specifing TARGETNAME=NvDrvComm TARGETTYPE=DYNLINK UMTYPE=windows USE_MSVCRT=1 C_DEFINES=$(C_DEFINES) -DUNICODE -D_UNICODE -DNVDRVCOMM_EXPORTS LINKLIBS=$(SDK_LIB_PATH)\shell32.lib INCLUDES=$(INCLUDES); \ $(IFSKIT_INC_PATH); \ $(DDK_INC_PATH); \ ..\inc TARGETLIBS=$(TARGETLIBS) \ $(IFSKIT_LIB_PATH)\fltLib.lib \ $(IFSKIT_LIB_PATH)\kernel32.lib \ $(IFSKIT_LIB_PATH)\ntdll.lib SOURCES=NvDrvComm.cpp\ NvDrvComm.rc !if "$(DDK_TARGET_OS)"=="WinLH" _NT_TARGET_VERSION=$(_NT_TARGET_VERSION_WINXP) !endif But the build is complaining that it cannot find the DEF file. This creates an error. I built a DEF file by hand and that stopped the BUILD from complaining about the missing def file. BUT this project is on going and if I'm already using the declspec attributes for the things I need to export, why is BUILD complaining about the DEF file? I'd hate to think that I'll need to rewrite the def file everytime I want to add another export!? -- Gak - Finecats Tag: Mel Gibson Spanking! Tag: 94038
  - 19
    - IRP pending at unload on filter driver. Hello, I've made a search about this problem across the newsgroup and the web. I've seen a lot of response and always the same things: "Your routine is attach to an IRP...bla bla bla". But I see nowhere the way to resolve this problem. I add a cleanup routine (Dispatch cleanup) with an IoCancelRoutine and IoComplete function. In my unload function I add an IoDeleteDevice and an IoDetachDevice. What can I add more to avoid a BSOD when I unload my drivers ? Regards, Tag: Mel Gibson Spanking! Tag: 94035
  - 20
    - standard device requests and winusb Given: my USB device attached and detected; WinUSB.sys installed and executing. After obtaining my USB device handle (createfile), I can successfully execute WinUSB_Initialize. I then call WinUsb_ControlTransfer and fetch the status. Next I call WinUsb_ControlTransfer to set a feature (<WINUSB_SETUP_PACKET> RequestType=0, Request=3, Value=1, Index=0, Length=0). The call fails and the GetLastError string="A device attached to the system is not functioning." Note: 1. "Value=1" ==>> DEVICE_REMOTE_WAKEUP 2. This error also occurs when RequestType=1 or 2 Did I set a field incorrectly? Is the sequence of operations incorrect? Thanks dmm Tag: Mel Gibson Spanking! Tag: 94033
  - 21
    - how to disable USB disk cache I am trying to validate the SCSI commands in our USB drive product, and use file copy back and forth to create more traffic. However, I noticed the SCSI read command is passed down to USB device only the first time read. I think there must be some disk cache enabled. but I already set the disk policy as "Optimize for quick removal", which, I believe, is supposed to disable the disk cache. Anyone has idea how to set up the system to allow me to see every read in device ? -Gary Tag: Mel Gibson Spanking! Tag: 94032
  - 22
    - Network Configuration Interface Greetings, I am trying to learn how to configure network using INetCfg APIs. I need to understand how to install the actual adapter and associate TCP/ IP protocol with it. I would like to know exact order of steps needed to configure network. According to MSDN documentation, a network configuration object is created using CoCreateInstance function which is followed my enumerating interfaces and so on. I do not understand the full mechanics of INetCfg APIs. I will appreciate help toward making me understand/learn. Thanks Tag: Mel Gibson Spanking! Tag: 94024
  - 23
    - handling parallel port interrupts Hello, I've got a question about timing incoming IR signals and decoding them in Windows. Here's my story. I've built a device which detects IR signals at 38KhZ and sends interrupts to the parallel port. Then I created (well, I didn't write it entirely, but I edited one I found on the internet) a driver to catch those interrupts and I created a usermode program to interact with the driver. So far so good, everything seemed to work fine. I receive interrupts when I press a button on my remote control or when I just connect a wire between pin 2-9 and 10 of the parallel port. But there's also a problem. For some reason, I receive way too few interrupts when I press a button on my remote control, and the time between the interrupts always is nearly identical. My only guess is that for some reason processing an interrupt hasn't finished yet when the next interrupt arrives and that therefore that interrupt doesn't get handled. That should also explain why the time between logged interrupts is nearly identical; it always takes the same time to complete one interrupt and after that it can handle another. But I don't get why handling the interrupt would take that long. My pc should be fast enough to handle it. Here's my isr and dpc routine and after that the part in DriverEntry where I connect the interrupt to my driver. When an interrupt occurs, first the isr gets called and then the dpcroutine. I hope any of you have an idea why it doesn't handle all interrupts or what the problem is and how it can be fixed. Thanks in advance, Floris van Nee BOOLEAN hwinterfaceIsr(IN PKINTERRUPT Interrupt, IN OUT PVOID Context) { PDEVICE_OBJECT DeviceObject = Context; //KdPrint( ("hwinterface.sys: Interrupt Service Routine\n") ); /* We should check if the interrupt comes from us and return */ IoRequestDpc(DeviceObject, DeviceObject->CurrentIrp, NULL); return TRUE; } VOID hwinterfaceDpcRoutine(IN PKDPC Dpc, PDEVICE_OBJECT DeviceObject, IN PIRP Irp, IN PVOID Context) { PLOCAL_DEVICE_INFO DeviceExtension; PIRP pIrp; pIrp = DeviceObject->CurrentIrp; DeviceExtension = DeviceObject->DeviceExtension; //Get the current 'time' and print it to kernel debug KeQueryTickCount((PLARGE_INTEGER)&TickCount); KdPrint(("Interrupt: %d", TickCount)); return; } DeviceExtension = DeviceObject->DeviceExtension; DeviceExtension->Level = 7; DeviceExtension->Vector = DeviceExtension->Level; MappedVector = HalGetInterruptVector(Isa, 0, DeviceExtension->Level, DeviceExtension->Vector, &Irql, &DeviceExtension->Affinity); if (MappedVector == 0) DbgPrint("hwinterface.sys: HalGetInterruptVector failed\n"); IoInitializeDpcRequest(DeviceObject,hwinterfaceDpcRoutine); KdPrint(("%d", &DeviceExtension->InterruptObject)); status = IoConnectInterrupt(&DeviceExtension->InterruptObject, // InterruptObject hwinterfaceIsr, // ServiceRoutine DeviceObject, // ServiceContext NULL, // SpinLock MappedVector, // Vector Irql, // Irql Irql, // SynchronizeIrql Latched, // InterruptMode FALSE, // ShareVector DeviceExtension->Affinity, // ProcessorEnableMask FALSE); // FloatingSave if (!NT_SUCCESS (status)) DbgPrint("hwinterface.sys: IoConnectInterrupt Failed\n"); Tag: Mel Gibson Spanking! Tag: 94023
  - 24
    - Mailslot and Drivers hi all! i need a little help, i'm trying to communicate with a mailslot created in user mode, but when i try to open the mail slot with ZwOpenFile it fails with 0xC0000043 that means STATUS_SHARING_VIOLATION .... This is the code: //----------------------- ret = ZwOpenFile( &hand, GENERIC_WRITE, &oa, &iosb, 0, FILE_NON_DIRECTORY_FILE); //----------------------- are the flags used right? can someone help me please? ^_^ Thank you anyway and sorry 4 my english :) Tag: Mel Gibson Spanking! Tag: 94020
  - 25
    - About Windows Filtering Platform - Callout Modules API - Kernel Mo Hi all, I am very much new to Windows Filtering Platform and Kernel level Programming.I want to try out Packet Modification feature that is a part of the Callout Module API in WFP . Can I get any sample code for this Callout Module API .And Also want to know is there any structured way of learning this kind of kernel level program. And also want to initiate certain discussion about this WFP ? Some docs related to this WFP convey me that I need to write a driver or hook that will listen for the incoming packets of the NIC and then modify the packet.Can anyone confirm me that whether packet modification is really possible in WFP and If so please provide me with some guidelines.They also say it is alternate for the NDIS Mini port driver developments .? Tag: Mel Gibson Spanking! Tag: 94011

[url]http://Mel-Gibson-spanking.info/WindowsMediaPlayer.php?movie=148803[/url]

--
Studdly
------------------------------------------------------------------------
Posted via http://www.codecomments.com
------------------------------------------------------------------------

Top