FakeModem sample

TheMSsForum.com: The Microsoft Software Forum

The MSS Forum ‹ Drivers
- Archive
  - Biz
  - MCSE
  - CRM
  - Drivers
  - Framework
  - ADO
  - ASP
  - Compact
  - Forms
  - Dotnet
  - C#
  - VB
  - FontpageGen
  - Excel
  - WorkSheet
  - Exchange
  - Setup
  - Fox
  - Fontpage
  - ASP
  - IIS
  - Entourage
  - Money
  - Messanger
  - PocketPC
  - Powerpoint
  - Project
  - Publisher
  - Excel
  - VB
  - Security
  - Portal
  - Services
  - SQLServerDev
  - SVCS
  - SQLServer
  - VB
  - VC
  - MFC
  - ExcelGen

- Previous
  - 1
    - Firmware files location My driver need to write the hardware firmware files every time it starts. The files are a bit big ~100K uncompressed and ~60K compressed. Where should my INF file store these files? We prefer not to couple the firmware files with the driver since the driver might manage different versions of the firmware. Yariv. Tag: FakeModem sample Tag: 38479
  - 2
    - ai, no download? I was under the impression that the DDK could be downloaded somewhere? Am I right? Can I write a driver just for the fun of it? Tag: FakeModem sample Tag: 38477
  - 3
    - one question about IoGetDeviceObjectPointer dear all: Is ObjectName SymbolicName? In higher level driver,how can I get the ObjectName of the lower driver? thanks a lot 1 Tag: FakeModem sample Tag: 38476
  - 4
    - VIA VT8237 SATA drivers and Win server 2003 64 I have tried to install the new OS Windows server 2003 trial 64 on my pc based on a GA-K8VNXP MB with VIA VT8237 south bridge chipset and two SATA HDD . During the installation the drivers for SATA RAID controller are requested (on a floppy disk). I cannot find such drivers. Does anybody knows where these drivers can be found? Thank you. Alessandro from Italy --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.556 / Virus Database: 348 - Release Date: 26/12/2003 Tag: FakeModem sample Tag: 38475
  - 5
    - Driver install without windows ? Excuse the dumb question but how would I install drivers for my cd-rom without using windows ? Some kind of dos command I'm guessing. I have this p3 presario with no OS installed and need to install my cd-rom in order to install windows ( I have the drivers, but no way to input them) Thanks BErt Tag: FakeModem sample Tag: 38468
  - 6
    - monitor driver I'm,trying to change my color settings. The problem seems to be with the driver. How can I locate the proper driver for my monitor Tag: FakeModem sample Tag: 38465
  - 7
    - Penidng IOCTL The IRP Pending IOCTL is taking longer time to return.please help me out. thanks sai Tag: FakeModem sample Tag: 38464
  - 8
    - GDI_DRIVER Driver compilation with VS7.1 IDE Hi, Introduction: ********** I am writing a display mirror driver, I am trying to use the VS7.1 (.NET) IDE to compile the driver, conversion to an .vsproj solution is done by the 'Source to DSP converter' app provided with 'SoftIce driver suit'. The Problem: ********** The mirror is build of to files: the miniport driver and the display driver, no problems has occurred converting compiling and using the miniport driver, in contrast, conversion of the display driver failed: the 'Source to DSP converter' doesn't support GDI_DRIVER conversions, SO..., I tried to do some tricks: I have changed the TARGETTYPE of the GDI_DRIVER to DRIVER and then used the 'Source to DSP converter' with the new source file, the result was a new .vsproj compiling a .sys driver I have changed the name of the driver to be .dll and removed the 'DriverEntry' DLL entry point from the project configuration, still, using the new driver causes an 'Unhandled kernel mode exception', using the display driver compiled by the 'source' makefile works fine and doesn't reproduce this problem, what may cause the problem? what went wrong during the 'Source to DSP converter' conversion? what special configurations are required for a GDI driver? Should there be any specific entry point to a GDI_DRIVER? Thanks in advance, Nadav, Tag: FakeModem sample Tag: 38463
  - 9
    - PNP Manager I have developed a failover driver for a fibre channel medium changer device on Windows 2000 that is tightly dependent on the PNP Manager. When I pull the cable out of my hardware, one of my Win/2K systems immediately rescans the bus without any intervention on my part, notifies Device Manager of a hardware change, and sends IRP_MN_SURPISE_REMOVAL to my driver. I have another Windows system on which the rescan does not automatically take place. On that system I have to use device manager to manually "Scan for hardware changes" before the surprise removal notification will happen. In order for this driver to work, the scan needs to happen automatically. How do I get this to happen? Does it depend on Windows or on the fibre channel adapter card and its driver? Tag: FakeModem sample Tag: 38462
  - 10
    - Hi ,want some tips about the report descriptor of a HID device,thankyou Hi,now the HID device can be write ,but not read ,and app is following: Result = ReadFile (ReadHandle, InputReport, Capabilities.InputReportByteLength, &NumberOfBytesRead, (LPOVERLAPPED) &HIDOverlapped); cout<<"ReadFile: "<<GetLastError()<<endl ; GetLastError's return is always TIMEOUT.I think that it is something wrong in the firmware,but I cannot find them out ,hope some tips ,the following is the report descriptor: PS: Createfile and Writefile are normal. DSCR_DEVICE equ 1;; Descriptor type: Device DSCR_CONFIG equ 2;; Descriptor type: Configuration DSCR_STRING equ 3;; Descriptor type: String DSCR_INTRFC equ 4;; Descriptor type: Interface DSCR_ENDPNT equ 5;; Descriptor type: Endpoint ET_CONTROL equ 0;; Endpoint type: Control ET_ISO equ 1;; Endpoint type: Isochronous ET_BULK equ 2;; Endpoint type: Bulk ET_INT equ 3;; Endpoint type: Interrupt public DeviceDscr, ConfigDscr, StringDscr, UserDscr, HIDDscr, ReportDscr, ReportDscrEnd DSCR SEGMENT CODE ;;----------------------------------------------------------------------------- ;; Global Variables ;;----------------------------------------------------------------------------- ;; Note: This segment must be located in on-part memory. rseg DSCR;; locatethedescriptortableanywherebelow 8K DeviceDscr:db deviceDscrEnd-DeviceDscr;; Descriptor length db DSCR_DEVICE ;; Decriptor type dw 1001H ;; Specification Version (BCD) db 00H ;; Device class db 00H ;; Device sub-class db 00H ;; Device sub-sub-class db 40H ;; Maximum packet size dw 0B404H ;; Vendor ID dw 0255H ;; Product ID dw 0100H ;; Product version ID db 1 ;; Manufacturer string index db 2 ;; Product string index db 0 ;; Serial numberstring index db 1 ;; Number of configurations deviceDscrEnd: ConfigDscr:db ConfigDscrEnd-ConfigDscr;; Descriptor length db DSCR_CONFIG ;; Descriptor type db StringDscr-ConfigDscr;;Configuration+EndPoints length (LSB) db (StringDscr-ConfigDscr)/256;;Configuration + EndPointslength(MSB) db 1 ;; Number of interfaces db 1 ;; Interface number db 0 ;; Configuration string db 10000000b;; Attributes (b7 - buspwr, b6 - selfpwr, b5 - rwu) db 0FAH ;; Power requirement (div 2 ma) ConfigDscrEnd: IntrfcDscr: db IntrfcDscrEnd-IntrfcDscr;; Descriptor length db DSCR_INTRFC ;; Descriptor type db 0 ;; Zero-based index of this interface db 0 ;; Alternate setting db 2 ;; Number of end points db 03H ;; Interface class (HID) db 00H ;; Interface sub class db 00H ;; Interface sub sub class db 05H ;; Interface descriptor string index IntrfcDscrEnd: HIDDscr: db 09h ;; length db 21h ;; type: HID dw 1001h ;; release: HID class rev 1.1 db 00h ;; country code (USA) db 01h;; number of HID class descriptors tofollow db 22h ;; report descriptor type (HID) db (ReportDscrEnd-ReportDscr);;lengthofHID descriptor db 00h HIDDscrEnd: Ep1InDscr: db Ep1InDscrEnd-Ep1InDscr;; Descriptor length db DSCR_ENDPNT ;; Descriptor type db 81H ;; Endpoint number, and direction db ET_INT ;; Endpoint type db 40H ;; Maximum packet size (LSB) db 00H ;; Max packet size (MSB) db 1 ;; Polling interval (ms) Ep1InDscrEnd: Ep2OutDscr: db Ep2OutDscrEnd-Ep2OutDscr;; Descriptor length db DSCR_ENDPNT ;; Descriptor type db 02H;; Endpoint number, and direction db ET_INT ;; Endpoint type db 40H ;; Maximum packet size (LSB) db 00H ;; Max packet size (MSB) db 1 ;; Polling interval (ms) Ep2OutDscrEnd: ReportDscr: db 06h, 0A0h, 0FFh ;; Usage Page (FFA0H = vendor defined) db 09h, 01h ;; Usage (vendor defined) db 0A1h, 01h ;; Collection (Application) ;; The input report db 09h, 01h ;; Usage (vendor defined) db 15h, 00h ;; Logical minimum (0) db 25h, 0FFh ;; Logical maximum (255) db 75h, 08h ;; Report size (8 bits) db 95h, 40h ;; Report count (64 fields) db 81h, 02h;; Input (Data, variable, absolute) ;; The output report db 09h, 02h ;; Usage (vendor defined) db 75h, 08h ;; Report size (8 bits) db 95h, 40h ;; Report count (64 fields) db 91h, 02h;; Output (Data, Variable, Absolute) ;; The feature report db 09h, 03h;; Usage Page (vendor defined) db 75h, 08h ;; Report size (8 bits) db 95h, 05h ;; Report count (5 fields) db 0B1h, 02h;; Output (Data, variable, absolute) db 0C0h ;; End Collection ReportDscrEnd: Tag: FakeModem sample Tag: 38457
  - 11
    - Hi ,want some tips about the report descriptor of a HID device,thankyou Hi,now the HID device can be write ,but not read ,and app is following: Result = ReadFile (ReadHandle, InputReport, Capabilities.InputReportByteLength, &NumberOfBytesRead, (LPOVERLAPPED) &HIDOverlapped); cout<<"ReadFile: "<<GetLastError()<<endl ; GetLastError's return is always TIMEOUT.I think that it is something wrong in the firmware,but I cannot find them out ,hope some tips ,the following is the report descriptor: PS: Createfile and Writefile are normal. DSCR_DEVICE equ 1;; Descriptor type: Device DSCR_CONFIG equ 2;; Descriptor type: Configuration DSCR_STRING equ 3;; Descriptor type: String DSCR_INTRFC equ 4;; Descriptor type: Interface DSCR_ENDPNT equ 5;; Descriptor type: Endpoint ET_CONTROL equ 0;; Endpoint type: Control ET_ISO equ 1;; Endpoint type: Isochronous ET_BULK equ 2;; Endpoint type: Bulk ET_INT equ 3;; Endpoint type: Interrupt public DeviceDscr, ConfigDscr, StringDscr, UserDscr, HIDDscr, ReportDscr, ReportDscrEnd DSCR SEGMENT CODE ;;----------------------------------------------------------------------------- ;; Global Variables ;;----------------------------------------------------------------------------- ;; Note: This segment must be located in on-part memory. rseg DSCR;; locatethedescriptortableanywherebelow 8K DeviceDscr:db deviceDscrEnd-DeviceDscr;; Descriptor length db DSCR_DEVICE ;; Decriptor type dw 1001H ;; Specification Version (BCD) db 00H ;; Device class db 00H ;; Device sub-class db 00H ;; Device sub-sub-class db 40H ;; Maximum packet size dw 0B404H ;; Vendor ID dw 0255H ;; Product ID dw 0100H ;; Product version ID db 1 ;; Manufacturer string index db 2 ;; Product string index db 0 ;; Serial numberstring index db 1 ;; Number of configurations deviceDscrEnd: ConfigDscr:db ConfigDscrEnd-ConfigDscr;; Descriptor length db DSCR_CONFIG ;; Descriptor type db StringDscr-ConfigDscr;;Configuration+EndPoints length (LSB) db (StringDscr-ConfigDscr)/256;;Configuration + EndPointslength(MSB) db 1 ;; Number of interfaces db 1 ;; Interface number db 0 ;; Configuration string db 10000000b;; Attributes (b7 - buspwr, b6 - selfpwr, b5 - rwu) db 0FAH ;; Power requirement (div 2 ma) ConfigDscrEnd: IntrfcDscr: db IntrfcDscrEnd-IntrfcDscr;; Descriptor length db DSCR_INTRFC ;; Descriptor type db 0 ;; Zero-based index of this interface db 0 ;; Alternate setting db 2 ;; Number of end points db 03H ;; Interface class (HID) db 00H ;; Interface sub class db 00H ;; Interface sub sub class db 05H ;; Interface descriptor string index IntrfcDscrEnd: HIDDscr: db 09h ;; length db 21h ;; type: HID dw 1001h ;; release: HID class rev 1.1 db 00h ;; country code (USA) db 01h;; number of HID class descriptors tofollow db 22h ;; report descriptor type (HID) db (ReportDscrEnd-ReportDscr);;lengthofHID descriptor db 00h HIDDscrEnd: Ep1InDscr: db Ep1InDscrEnd-Ep1InDscr;; Descriptor length db DSCR_ENDPNT ;; Descriptor type db 81H ;; Endpoint number, and direction db ET_INT ;; Endpoint type db 40H ;; Maximum packet size (LSB) db 00H ;; Max packet size (MSB) db 1 ;; Polling interval (ms) Ep1InDscrEnd: Ep2OutDscr: db Ep2OutDscrEnd-Ep2OutDscr;; Descriptor length db DSCR_ENDPNT ;; Descriptor type db 02H;; Endpoint number, and direction db ET_INT ;; Endpoint type db 40H ;; Maximum packet size (LSB) db 00H ;; Max packet size (MSB) db 1 ;; Polling interval (ms) Ep2OutDscrEnd: ReportDscr: db 06h, 0A0h, 0FFh ;; Usage Page (FFA0H = vendor defined) db 09h, 01h ;; Usage (vendor defined) db 0A1h, 01h ;; Collection (Application) ;; The input report db 09h, 01h ;; Usage (vendor defined) db 15h, 00h ;; Logical minimum (0) db 25h, 0FFh ;; Logical maximum (255) db 75h, 08h ;; Report size (8 bits) db 95h, 40h ;; Report count (64 fields) db 81h, 02h;; Input (Data, variable, absolute) ;; The output report db 09h, 02h ;; Usage (vendor defined) db 75h, 08h ;; Report size (8 bits) db 95h, 40h ;; Report count (64 fields) db 91h, 02h;; Output (Data, Variable, Absolute) ;; The feature report db 09h, 03h;; Usage Page (vendor defined) db 75h, 08h ;; Report size (8 bits) db 95h, 05h ;; Report count (5 fields) db 0B1h, 02h;; Output (Data, variable, absolute) db 0C0h ;; End Collection ReportDscrEnd: Tag: FakeModem sample Tag: 38456
  - 12
    - usb with ohci?..any simple tutorials?..code? Howdy all, well I was wondering if anyone had come across some really simple...but good tutorials on the ohci specification with code...and how to use it with a usb device...very low level stuff...for example mapping to the registers in memory ...testing for bits...and with simple code examples that would explain why......not working through the os though...a kernel driver possible...like that is done in linux :) Thanx for any help :) Ben Tag: FakeModem sample Tag: 38453
  - 13
    - CMOS sensor - USB Trust 120 Spacec@m Webcam Hello. Can someone tell me the name/model of the CMOS sensor in the above webcam? Or an hint on how to retrieve it? I don't have datasheets. Trust and Google don't help. The name is not written on the hardware. I analyzed the drivers for windows (40 MB of zipped shit for just a driver..hu..): nothing The only information is the it has 28 pins: **nothing** more. Any idea would be much appreciated. Thanks in advance. Tag: FakeModem sample Tag: 38441
  - 14
    - HCT 11.2 - TestImports Problem Can someone help me understand what this error means: ERROR: 71: Public Imports Test failed to run, TestImports function call failed. This is from a run of HCT with an NDIS IM driver. What's odd is the NDISTEST 1c_KernelCalls passes (I assume that TestImports checks for invalid kernel calls from an NDIS driver). Also, the driver is not binary compatible (it's only used for XP). Would that cause this problem. Tag: FakeModem sample Tag: 38439
  - 15
    - HCT 11.2 - TestDrivers failure Can someone help me understand what this error means: ERROR: 71: Signability Test failed to run, TestDrivers function call failed. This is from a run of HCT with an NDIS IM driver. Also, the driver is not binary compatible (it's only used for XP). Would that cause this problem. Tag: FakeModem sample Tag: 38438
  - 16
    - Service Name Issues With CheckInf I get the following error with checkinf from Windows 2003 DDK: Line 77: ERROR: (E22.1.1014) Service Net6IM already using binary $WinDir$\system32\drivers\net6im50.sys. This is odd since I am using the same service for both W2K and XP installations. However, I've added a target OS version in the Manufacturer section and am using separate NDI's for the OSs that the inf is used on. Is this a WHQL requirement that different services must be used on different OSs or is this a problem with the chkinf tool? Tag: FakeModem sample Tag: 38437
  - 17
    - AVSTREAM and Power Management Hi, Is there any pointer on how to implement Power management in a Avstream minidriver I have a video capture device that causes the machine to hang when it tries to resume from Standby. The device is USB2.0 compliant Tag: FakeModem sample Tag: 38431
  - 18
    - ExtEscape directly to video miniport Is it possible to do a createdc on a video miniport driver(.sys) and send it escapes, or do i have to connect to the display driver(.dll) and send it escapes? Thanks a million Brian Tag: FakeModem sample Tag: 38429
  - 19
    - FYI: Recently Published KBs FIX: Drivers That Have Images That Are Larger Than 16 Megabytes May Corrupt Memory When Loaded http://support.microsoft.com/default.aspx?scid=kb;EN-US;827484 How to call video miniport driver functions from a display driver http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q832517 FIX: A USB Device Appears with a Yellow Exclamation Mark (Code 31) in Windows Device Manager http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q822368 Accelerated Graphics Port (AGP) memory allocation http://support.microsoft.com/default.aspx?scid=kb;EN-US;819637 Multimedia device does not shut down correctly if you unplug the device during streaming http://support.microsoft.com/default.aspx?scid=kb;EN-US;816650 Composite USB devices whose interfaces are not sequentially numbered do not work on Windows XP http://support.microsoft.com/default.aspx?scid=kb;EN-US;814560 Change in how self-directed loopback packets are processed for Windows XP http://support.microsoft.com/default.aspx?scid=kb;EN-US;813542 FIX: Selective Suspend Does Not Work on Video Capture Devices That Use the Stream Class Driver http://support.microsoft.com/default.aspx?scid=kb;EN-US;813348 BUG: The 1394 host controller properties dialog box incorrectly shows the Power Management tab http://support.microsoft.com/default.aspx?scid=kb;EN-US;328902 How to identify identical 16-bit PC cards that are inserted in different slots http://support.microsoft.com/default.aspx?scid=kb;EN-US;323610 BUG: Known issues with intermediate (IM) driver samples http://support.microsoft.com/default.aspx?scid=kb;EN-US;323458 You cannot use Control Panel to calibrate a joystick that has no buttons http://support.microsoft.com/default.aspx?scid=kb;EN-US;318919 How to use the DDKSynth audio sample on Windows 98 and on Windows Millennium Edition http://support.microsoft.com/default.aspx?scid=kb;EN-US;318772 PRB: Video Driver Installation Is Unsuccessful When You Click the Update Driver Button in Device Manager http://support.microsoft.com/default.aspx?scid=kb;EN-US;314283 Windows 98 Smartcard drivers must call the SmartcardCreateLink function http://support.microsoft.com/default.aspx?scid=kb;EN-US;300600 Smart card power down behavior on Windows 2000 and earlier operating systems http://support.microsoft.com/default.aspx?scid=kb;EN-US;297854 -- -Eliyas This posting is provided "AS IS" with no warranties, and confers no rights. http://www.microsoft.com/whdc/hwdev/driver/kb-drv.mspx Tag: FakeModem sample Tag: 38423
  - 20
    - Audio synchronization I need to synchronize audio with another output device. Can I do this with an interrupt driven heartbeat generated by the output device. The synchronization only needs to be visually accurate, in other words I'm not concerned about microseconds, but I would like to be accurate to 100 milliseconds. My initial thought is to have my interrupt routine begin a 100ms segment of audio. The next interrupt would stop the previous segment (if the audio is behind) and then play the next segment. My "interrupt routine" would probably be a thread at the application level waiting for my device to interrupt. I don't think I would need to place this in my device's DPC. I've been reading up on the Wavform Audio Interface, is this the correct area? There must be some support for this built into the interface to facilitate the usage of a scroll bar to scan through an audio file. My questions are, am I looking in the right place and a corrollary, how flexible is the interface? I don't want to waste research time going down a false path. Brian Tag: FakeModem sample Tag: 38421
  - 21
    - Picture transfer protocol Folks, I would like to acquire images and change camera settings under program control, using a Nikon Coolpix camera connected via USB, and the Nikon SDK (which I have). I gather this requires PTP and WIA, but am so far entirely ignorant of these technologies. I'd really appreciate it if someone would give me a pointer to documentation that could get me started. (The information I've obtained by searching msdn seems pretty disorganized so far.) Thanks much, Matthew Fleming mgf@mcw.edu Tag: FakeModem sample Tag: 38415
  - 22
    - INF files help Ok, in my device driver install inf, I would either like to luanch an application or force a reboot or let the user know to reboot. Does anyone know of a way to accomplish this? Thanks Brian Tag: FakeModem sample Tag: 38413
  - 23
    - ZwCreateFile failing Hi, I have a routine which open the file handle for me. It works fine as long as no one touches the file from Explorer. But once someone opens the file from explorer the driver create file always fails with status LOCK CONFLICT. Here is the file open code. Any clues. -Praveen RtlInitUnicodeString(&fileName, L"\\??\\C:\\MyDrvTest"); InitializeObjectAttributes(&objectAttributes, (PUNICODE_STRING)&fileName, OBJ_CASE_INSENSITIVE|OBJ_KERNEL_HANDLE , NULL, NULL); status=ZwCreateFile(&fileHandle, GENERIC_READ|GENERIC_WRITE|SYNCHRONIZE, &objectAttributes, &IoStatus, 0, FILE_ATTRIBUTE_SYSTEM, FILE_SHARE_READ|FILE_SHARE_WRITE, FILE_OPEN_IF, FILE_SYNCHRONOUS_IO_NONALERT|FILE_NO_INTERMEDIATE_ BUFFERING, NULL, 0); Tag: FakeModem sample Tag: 38412
  - 24
    - Difference between IoBuildPartialMdl and IoAllocateMdl Which is the difference between the function IoBuildPartialMdl and IoAllocateMdl? Apparement they allocate all two MDL; I do not see any difference in operation, why in IoBuildPartialMdl there is like parameter " IN PVOID VirtualAddress "?? Nothing understood, the address is already in sourcemdl- >startva! Will be used to you it for dedoubler an address virtual? apparament not How can you one read the true pointer MDL corresponding at address memory indicated? because when I modify a property of a variable pointer MDL, the address memory corresponding to this MDL remains similar Tag: FakeModem sample Tag: 38407
  - 25
    - Error USBD_STATUS_ISO_NOT_ACCESSED_BY_HW Hello: What is the meaning and cause of usb packet error USBD_STATUS_ISO_NOT_ACCESSED_BY_HW (code 0xC0020000) returned by urb->UrbIsochronousTransfer.IsoPacket [PacketNumber].Status? I am getting this error occasionally (a few percent of all packets) when streaming bidirectional (1 stream out, 1 stream in, simultaneously using 2 alternating urbs for outgoing and 2 for incoming) high speed usb 2.0 isochronous data to a custom hardware device. I am using 16 microframe urbs and the error always occurs on microframes 1, 2, and sometimes 3 of the 16 that are being transferred. All microframes before and after this complete normally. It affects both read and write urbs. OS is WinXp SP1 with USB patch. Usb.h states that "for some reason the controller did not access the TD asocated with this packet" as explanation for this error. Thanks Doug Tag: FakeModem sample Tag: 38405
- Next
  - 1
    - I refuse to believe this.... When installing a printer driver, Add-Printer etc etc, it prompts me for a printer name just before finishing the installation. I have two printer models, but would like to use the same printer name.. without having to manually enter it. Is there really no way that I in my INF file can provide a default printer name ? TIA Lars ; ; Copyright (c) 2002-2003 I/F-Com ; ; Sets up basic information on the driver ; [Version] Signature="$Windows NT$" Provider=%MANUFACTURER% ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318} Class=Printer CatalogFile=ifcom.cat DriverVer=10/05/2003,1.3.0.10 ; sets up destination folders ; [DestinationDirs] DRIVERPATH=66000 PROCESSPATH=66001 BIDIRPATH=66002 ; set manufacturer ; [Manufacturer] %MANUFACTURER% ; set available printers ; [I/F-Com] "Ifcom Thermal Printer" = SETUP_DRIVER, IFCOM_Driver "Ifcom Thermal Printer (bidir)" = SETUP_DRIVER_BIDIR, IFCOM_Driver_Bidir ; driver setup section ; [SETUP_DRIVER] CopyFiles=DRIVERPATH,PROCESSPATH DataSection=DATA_SECTION [SETUP_DRIVER_BIDIR] CopyFiles=DRIVERPATH,PROCESSPATH,BIDIRPATH DataSection=DATA_SECTION_BIDIR [SourceDisksNames] 1=%DISKLOCATION% [SourceDisksFiles] ifc_drv.dll=1 ifc_ui.dll=1 ifc_lm.dll=1 basics.ini=1 boards.ini=1 help.ini=1 ifc_drv.ini=1 printers.ini=1 installer.exe=1 properties.exe=1 updater.exe=1 diagnostics.exe=1 ; actual copying of files ; [DRIVERPATH] ifc_drv.dll,,,0x00000002 ifc_ui.dll,,,0x00000002 ifc_drv.ini,,,0x00000002 basics.ini,,,0x00000002 boards.ini help.ini printers.ini installer.exe properties.exe updater.exe diagnostics.exe [PROCESSPATH] [BIDIRPATH] ifc_lm.dll ; driver setup ; [DATA_SECTION] DriverFile=ifc_drv.dll DataFile=ifc_drv.ini ConfigFile=ifc_ui.dll HelpFile=help.ini [DATA_SECTION_BIDIR] DriverFile=ifc_drv.dll DataFile=ifc_drv.ini ConfigFile=ifc_ui.dll HelpFile=help.ini LanguageMonitor=%LANGUAGEMONITOR%,ifc_lm.dll ; strings ; [Strings] MANUFACTURER="I/F-Com" DISKLOCATION="Current Location" LANGUAGEMONITOR="Ifcom Language Monitor" Tag: FakeModem sample Tag: 38403
  - 2
    - Change in how self-directed loopback packets are processed for Windows XP FYI: Microsoft Knowledge Base Article - 813542 Change in how self-directed loopback packets are processed for Windows XP http://support.microsoft.com?id=813542 Stephan Tag: FakeModem sample Tag: 38401
  - 3
    - BUG: Known issues with intermediate (IM) driver samples FYI: Microsoft Knowledge Base Article - 323458 BUG: Known issues with intermediate (IM) driver samples http://support.microsoft.com?id=323458 Stephan Tag: FakeModem sample Tag: 38399
  - 4
    - compilation problem i am not able to get .sys for ndisuio. code gets compile without any problem on win2k checkbuild. ---------- C:\WINDDK\2600~1.110\src\network\ndis\ndisuio\sys>build BUILD: Adding /Y to COPYCMD so xcopy ops won't hang. BUILD: Object root set to: ==> objchk_w2K_x86 BUILD: Compile and Link for i386 BUILD: Loading C:\WINDDK\2600~1.110\build.dat... BUILD: Computing Include file dependencies: BUILD: Examining c:\winddk\2600~1.110\src\network\copy of ndis\ndisuio\sys direc tory for files to compile. c:\winddk\2600~1.110\src\network\copy of ndis\ndisuio\sys - 7 source files ( 4,981 lines) BUILD: Saving C:\WINDDK\2600~1.110\build.dat... BUILD: Compiling c:\winddk\2600~1.110\src\network\copy of ndis\ndisuio\sys direc tory Compiling - objchk_w2k_x86\i386 for all platforms Compiling - objchk_w2k_x86\i386 for all platforms Compiling - objchk_w2k_x86\i386 for all platforms BUILD: Linking c:\winddk\2600~1.110\src\network\copy of ndis\ndisuio\sys directo ry Compiling - objchk_w2k_x86\i386 for all platforms Compiling - objchk_w2k_x86\i386 for all platforms Compiling - objchk_w2k_x86\i386 for all platforms BUILD: Done 3 files compiled ------------------------------------------------------------------- build log shows ----------------- BUILD: Computing Include file dependencies: BUILD: Examining c:\winddk\2600~1.110\src\network\copy of ndis\ndisuio\sys directory for files to compile. Compiling c:\winddk\2600~1.110\src\network\copy of ndis\ndisuio\sys directory ******************** 'nmake.exe /c BUILDMSG=Stop. -i NTTEST= UMTEST= NOLINK=1 NOPASS0=1 386=1' jvc /nologo /cp C:\WINDDK\2600~1.110\public\sdk\classes\afc.zip;C:\WINDDK\2600~1.110\public\ sdk\classes\classes.zip;C:\WINDDK\2600~1.110\src\network\Copyofndis\ndisuio\ sys; /g /w4 /d objchk_w2K_x86\i386 'jvc' is not recognized as an internal or external command, operable program or batch file. jvc /nologo /cp C:\WINDDK\2600~1.110\public\sdk\classes\afc.zip;C:\WINDDK\2600~1.110\public\ sdk\classes\classes.zip;C:\WINDDK\2600~1.110\src\network\Copyofndis\ndisuio\ sys; /g /w4 /d objchk_w2K_x86\i386 'jvc' is not recognized as an internal or external command, operable program or batch file. jvc /nologo /cp C:\WINDDK\2600~1.110\public\sdk\classes\afc.zip;C:\WINDDK\2600~1.110\public\ sdk\classes\classes.zip;C:\WINDDK\2600~1.110\src\network\Copyofndis\ndisuio\ sys; /g /w4 /d objchk_w2K_x86\i386 'jvc' is not recognized as an internal or external command, operable program or batch file. Linking c:\winddk\2600~1.110\src\network\copy of ndis\ndisuio\sys directory ******************** 'nmake.exe /c BUILDMSG=Stop. -i LINKONLY=1 NOPASS0=1 NTTEST= UMTEST= 386=1' jvc /nologo /cp C:\WINDDK\2600~1.110\public\sdk\classes\afc.zip;C:\WINDDK\2600~1.110\public\ sdk\classes\classes.zip;C:\WINDDK\2600~1.110\src\network\Copyofndis\ndisuio\ sys; /g /w4 /d objchk_w2K_x86\i386 'jvc' is not recognized as an internal or external command, operable program or batch file. jvc /nologo /cp C:\WINDDK\2600~1.110\public\sdk\classes\afc.zip;C:\WINDDK\2600~1.110\public\ sdk\classes\classes.zip;C:\WINDDK\2600~1.110\src\network\Copyofndis\ndisuio\ sys; /g /w4 /d objchk_w2K_x86\i386 'jvc' is not recognized as an internal or external command, operable program or batch file. jvc /nologo /cp C:\WINDDK\2600~1.110\public\sdk\classes\afc.zip;C:\WINDDK\2600~1.110\public\ sdk\classes\classes.zip;C:\WINDDK\2600~1.110\src\network\Copyofndis\ndisuio\ sys; /g /w4 /d objchk_w2K_x86\i386 'jvc' is not recognized as an internal or external command, operable program or batch file. -------------------- i have changed some options in SOURCES files, i removed "-DNDIS51=1", as i was compiling for 5.0. and also in bind i removed 80211 headers. any idea why it is so. Tag: FakeModem sample Tag: 38395
  - 5
    - CreateFile failure Hi all, i have been trying to get handle of my protocol driver from usermode but not able to get. attaching the code. van you tell me where can be the error. Device name is "Proto". CHAR ProtoDevice[] = "\\\\.\\\\Proto"; CHAR * pProtoDevice = &ProtoDevice[0]; HANDLE GetHandle( CHAR *pDeviceName ) { DWORD DesiredAccess; DWORD ShareMode; LPSECURITY_ATTRIBUTES lpSecurityAttributes = NULL; DWORD CreationDistribution; DWORD FlagsAndAttributes; HANDLE TemplateFile; HANDLE Handle; DWORD BytesReturned; DesiredAccess = GENERIC_READ|GENERIC_WRITE; ShareMode = 0; CreationDistribution = OPEN_EXISTING; FlagsAndAttributes = FILE_ATTRIBUTE_NORMAL; TemplateFile = (HANDLE)INVALID_HANDLE_VALUE; Handle = CreateFile( pDeviceName, DesiredAccess, ShareMode, lpSecurityAttributes, CreationDistribution, FlagsAndAttributes, TemplateFile ); if( Handle == INVALID_HANDLE_VALUE ) { Handle = CreateFile( "\\\\.\\Global\\Proto", DesiredAccess, ShareMode, lpSecurityAttributes, CreationDistribution, FlagsAndAttributes, TemplateFile ); } return (Handle); } any idea how to make it work. regards, Puneet Tag: FakeModem sample Tag: 38391
  - 6
    - Device Object NULL in completion routine Hi, In my FSD filter, I am building up my own IRP to send to the lower driver so that I can get some info (QueryDirectory) about a directory. The problem is that when my completion routine is called, it contains proper data, but the device object I get is NULL (is this normal?). Also my stack location seems to be wrong since it no longer contains the parameters (minor/major functions say), that I setup. Any clues? TIA, -- -Farooque Khan http://farooque.150m.com Tag: FakeModem sample Tag: 38390
  - 7
    - Class GUID issue Hi I write a new driver for 2k/xp,this device is not in system-supplied device setup class. so , I create my class name and GUID myself in inf file. I use ClassInsatll32 section,so,It is ok when install my driver to OS. And driver can work normal. But the inf file is tested by HCT11.2's infcheck,It have a error that "class ### is unrecognized". Please tell me, if i miss some phase. Best Regards, Alex Tag: FakeModem sample Tag: 38385
  - 8
    - How to Set port crystal frequency and clock pre-divisor by program? hi,everyone! Now,I want to set the properties of "Crystal Frequency" and "Clock Pre-Divisor" of com port by program in WIN98. Anyone tell me how to do? Thanks a lot! Tag: FakeModem sample Tag: 38384
  - 9
    - contraints for pagespersheet and booklet Hello how do u contraint print proc provided features ( N-UP and Booklet ) in Unidrv . pagespersheet is not a standard feature in Unidrv ( not a *Feature ) is this correct. thanks -Naveen Tag: FakeModem sample Tag: 38377
  - 10
    - API to rollback driver? Does anyone know of a way to invoke the "Roll Back Driver" functionality of Windows XP programmatically? I've searched the MSDN docs and the web to no avail... Anyhow, I'd like to invoke a rollback during an uninstall of a "custom" driver, so that we can revert to the default driver when uninstalling ours. Thanks in advance, Lee Tag: FakeModem sample Tag: 38376
  - 11
    - Maximum StrMini Driver Size?? I am developing a stream class mini driver based on usbcamd. Today I ran into an extremely odd BSOD that I initially thought was related to some memory management code that I had added. It turns out that the problem is that I added code. I have reached the state where the following will take the driver from functional to non-functional. int i for(i=0;i<1;++i){} I can add this, or equally useless code in a variety of different functions (none of which are called) and cause this error. The BSOD message is about a page fault in the non-paged area caused by ks.sys. It occurs when I attempt to render the capture pin on the filter. The driver can be loaded and unloaded as many times as one likes without error. I am wondering if this can be related to SRB_PAGING_OUT_DRIVER? I noticed that the INF file (intelcam) I copied does set PageOutWhenUnopened registry setting. Is it possible that enabling this can cause this error or is there some other possibility? This is running on XP Pro SP1. Regards, Tom Udale Tag: FakeModem sample Tag: 38374
  - 12
    - Sound Capture Hi, I have a problem.... actually it is a thing to do on my list, and I wondering if anyone can give me a hint or two on where to look for tackling it. Well, all I need to do is to intercept and capture sound (wav or raw doesn't matter) that only a certain application generates opposed to whole system (all apps.). The app. uses none of the fancy directx stuff, just plain win32 APIs (MCI I think) Any thought on how should I begin looking for this solution? Thanks in Advance, Paul Tag: FakeModem sample Tag: 38373
  - 13
    - Win2k printer minidrivers running on NT 4? Is it possible to run Win2k printer minidrivers (Unidrv-based) on NT4? I'm told that SP6 installs Unidrv - is it compatible? Thanks, Aaron Tag: FakeModem sample Tag: 38371
  - 14
    - Device Extension for NDIS miniport driver I am writing a NDIS miniport driver. From DDK documentation, I was told to use NdisRegisterDevice instead of IoCreateDevice to create a device object. However, the same documentation also says that the device extension for an object created with NdisMRegisterDevice is reserved for use by NDIS and cannot be used by the driver. I want to modify the device extension to store any state status and information. How can I do that? Thanks, Billy. Tag: FakeModem sample Tag: 38370
  - 15
    - Win2000 startup w/o VGA Can an embedded Win2000 system be started without VGA, keyboard and mouse hardware? NT4.0 used to choke when VGA was absent. Thanks. Tag: FakeModem sample Tag: 38369
  - 16
    - SetupCopyOEMInf - avoiding prompts during install I have a new driver install and an old driver install that use different source media locations. I have been using SPOST_PATH for the OEMSourceMediaType when I call SetupCopyOEMInf. This is leading to setup problems because the old INF is selected by SetupAPI during install. This INF points to an installation directory that does not exist and the user is prompted for the correct location of required files. I think the root of this problem is that the PNF has to old source media information. Should I call SetupCopyOEMInf with SP_COPY_REPLACEONLY copy style to update the old PNF if it exists and then call it again with the SP_COPY_NOOVERWRITE copy style to copy it sure the PNF has the current source path info (if needed)? I'm installing an IM driver on 2000/XP. Thanks, Shawn Tag: FakeModem sample Tag: 38364
  - 17
    - Hardware ID in win 2000 and UpdateDriverForPNP My .inf has an entry for that says _01 %xyz.DeviceDesc%=xyz.Device,USB\VID_xxx&PID_yyy I am trying to install the driver for the device for the case where the device is plugged in but the Add New hardware wizard was cancelled by the user. Now, if I pass the HWID "USB\\VID_xxx&PID_yyy", updateDriverfor.. fails with 20B (no_such_device) I think. Then if I change it to "USB\\VID_xxx&PID_yyy&Rev_0001" (which I know from the registry whenever I install this successfully in the nice ol' plug device after software installation way) AND also change it in .INF, my updatedriver.. succeeds and device is shown working properly with the correct name in device manager. So my question is, what is that Rev.. thing? is it like a hardware revision? if so, I would not know every possible revision number in advance and would like to keep it generic for the device? How do I achieve that? What is the correct entry in .INF and correct HardwareID to be passed to the function updatedriver.. Thanks for your time. Tag: FakeModem sample Tag: 38363
  - 18
    - Installing devices Could you give me any example how to programmatically install devices. It should work properly at 9x, 2000/XP platforms. I've tried "working" samples from ddk's, but they were not worked properly. Thank you. Tag: FakeModem sample Tag: 38360
  - 19
    - Child Display Driver... Hi, I want to implement a WDM Child Display Driver and request I2C interface from display driver which I am going to use to send the DDC/CI data to Monitor. One option was to have WDM child driver to miniport but I am exploring this possibility. Is it possible to make a WDM driver a child driver to main display driver and how do I specify that this is child driver of display driver so that system and display driver can understand this ? Any help in this regard will be appreciated.. Vishvesh Tag: FakeModem sample Tag: 38358
  - 20
    - What's the rule to call IoCompleteRequest for power Irp? I understand when should call IoCompleteRequest for PnP Irp. For Power Irp, it seems have different rule. I am confused, I don't know when I should call IoCompleteRequest for power Irp, when should not. For example, bulk usb sample code of XP DDK. In set device power state process, IoComplete routine of power Irp calls IoCompleteRequest to complete Irp when power up. However, IoComplete routine doesn't call IoCompleteRequest when power down. Why it needn't call IoCompleteRequest? What's the rule to call IoCompleteRequest for power Irp? Can anyone tell me? Best Regards Jackal Huang Tag: FakeModem sample Tag: 38354
  - 21
    - Writing Data to BIOS Hi, Is there a way for writing data onto BIOS.I want to write data of size 20 bytes for validation purposes in the BIOS from an Application.Can we do this with C APIs.Any help is appreciated. Shyam. Tag: FakeModem sample Tag: 38352
  - 22
    - Help on Win2k and USBD_STATUS_DEV_NOT_RESPONDING Hello Everyone, I have written a NDIS-WDM (USB) driver. I ran the NDISTest on Windows XP. There was no problem. Then I used (ported) the same driver on Win2K (by setting NDIS50 instead of NDIS51). Surprisingly, I am getting a strange problem. When I run heavy traffic tests (like 2c_PerformanceProfile and 2c_SendRecv1), I get a strange error in the middle of the transfer. I get STATUS_DEVICE_DATA_ERROR in the IRP Status and USBD_STATUS_DEV_NOT_RESPONDING in the URB Status. But the device is connected and running. I tried doing RESET_PORT at the error condition. But it does not help. Also, when I remove the cable also, I don't get STATUS_DEVICE_NOT_CONNECTED in Win2k (like I get on WinXP). Instead I get STATUS_DEVICE_DATA_ERROR (and USBD_STATUS_DEV_NOT_RESPONDING). How can I handle the conditions? Even though the device is connected and working, I get USBD_STATUS_DEV_NOT_RESPONDING and when the device is not connected also I get the same error. There is no difference in the errors. Since mine is a NDIS-WDM driver, I don't get SURPRISE REMOVAL event on Win2K (as I get on XP). So, I cannot detect the surprise removal also. I have to wait for the MiniPortHalt to be called which does not happen until I stop the USBD IN/Read transactions. If I ignore the first error of USBD_STATUS_DEV_NOT_RESPONDING, I get ENDPOINT_HALTED error in the subsequent IN/read transactions. I know at least one of you might have faced the same/similar problem. Can anyone please help me in having a work-around for this problem. If I am doing something wrong in my driver, please let me know so that I can correct the same. Thanks in advance for the great help. Best Regards, GNRaj Tag: FakeModem sample Tag: 38350
  - 23
    - Enumerating NIC's Registry key Is there a way to get the NIC's registry entry path in order to open it with the standard ZW registry routines? I want to open a key under the NIC's key and then enumerate its entries. Is there a way to do that? Gram, Tag: FakeModem sample Tag: 38349
  - 24
    - pull man from burning printer Passers-by, neighbors fight fire in Exeter. Re: pull man from burning home Passers-by, neighbors fight fire in Exeter. > !!!!!! wrote > >Okay, there was a fire and a couple of guys were heroes. That's nice, but >it's obviously nothing more than a religious agenda. So why crosspost it to >misc.emerg-services? berry why not thats where it should be Tag: FakeModem sample Tag: 38347
  - 25
    - Device object creating in 2003 Hello, I am making some device driver for DVD media. But I have trouble for DVD multi-drive that can support DVD-R/RW, DVD- RAM media at same time. So I need change it's device type depending on media. Also, I want to create DosDevice which will be a mount point of media. ( This works good in Windows 2000 ) What I am trying to do: 1. Change device type from FILE_DEVICE_DISK to FILE_DEVICE_CD_ROM or reverse. 2. Create virtual driver letter( ex, z:\ ) which is symbolic linked to '\Device\xxxx'. * basically both 1 & 2 are working good in windows 2000, but not in windows 2003. Where I am at: 1. When the system boots up, I create Device node with FILE_DEVICE_DISK. When a DVD-ROM media inserted, delete that node and create new device node with FILE_DEVICE_CD_ROM as same device name. ( In case of DVD- RAM media, use it as it is. ) The deletion and new creation device node returns success. But when I try to get File system using NtQueryVolumeFile, the process is hang. I quess the device type is not changed. 2. When I got some ioctl, I create 2 device nodes. One is \Device\xxxx with FILE_DEVICE_DISK and the other is \DosDevice\z:. And I did symbolic link both. Here, I got success return value for all step. But I cannot look up \DosDevice\z: even if I can see \Device\xxxx.( with WinObj.exe ) The data I/O to z: works good. But I can't see z: drive in window explorer. * But when I make a windows service application which do as same step of #2, the service application can create \DosDevice\z: and z: is visiabl in window explorer. Both 1&2 device driver is made of LEGACY type not PNP. Let me know if you need any more details. Thanks. Tag: FakeModem sample Tag: 38346

Hello,

Does anyone have any experience with the FakeModem sample?

I wanted to start experimenting with a modem driver and I thought I would try compiling and playing with the FakeModem example found in C:\WINDDK\2600.1106\src\network\modem\fakemodem. I made no changes to the code, just compiled and installed. I then fired up HyperTerminal--and nothing. Not a thing.

Are there any other modem samples somewhere that I could look at?

Thanks
Jim

Top