IFS Driver losck Excel file

TheMSsForum.com: The Microsoft Software Forum

The MSS Forum ‹ Drivers
- Archive
  - Biz
  - MCSE
  - CRM
  - Drivers
  - Framework
  - ADO
  - ASP
  - Compact
  - Forms
  - Dotnet
  - C#
  - VB
  - FontpageGen
  - Excel
  - WorkSheet
  - Exchange
  - Setup
  - Fox
  - Fontpage
  - ASP
  - IIS
  - Entourage
  - Money
  - Messanger
  - PocketPC
  - Powerpoint
  - Project
  - Publisher
  - Excel
  - VB
  - Security
  - Portal
  - Services
  - SQLServerDev
  - SVCS
  - SQLServer
  - VB
  - VC
  - MFC
  - ExcelGen

- Previous
 - 1
 - USB drivers oddity on Win2K This is strange, and I'm wondering if it's something I've done. We have a USB composite device that has two endpoints, one of which is used as a debug channel and one which is a mass storage interface. The mass storage interface works just fine.. however.. When our system (Windows 2000) crashes, it sometimes forgets that it needs the "USB Composite Device" driver and we have to manually reinstall it! This is somewhat tedious and painful, as you might expect, since it looks like that driver has to be reinstalled for each port that we're putting one of these devices on (ugh). I've looked over our debug interface driver code and I can't find anything that would cause Win2K to decide it doesn't need the composite interface any longer. Has anyone seen anything like this before? Does WinXP handle composite devices better? Are there any known issues with composite USB devices under Win2K? All help appreciated, I'm running out of hair to pull out! Tag: IFS Driver losck Excel file Tag: 70857
 - 2
 - UNIDRV Banding Line Count error? Hello, I've got a rendering plugin with ImageProcessing doing RGB24 to CMYK custom halftoning. (That is, DevNumPlanes = 4, DevBPP = 1, DrvBPP= 24.) The conversion itself works fine, *except*: when UNIDRV is doing banding, if the last band is shorter than the previous bands, the difference (in lines) is added to the print as garbage raster data. E.G: for a 3300 line Letter page: ImageProcessing reports 4 x bands of 664 lines, then one of 644. What is printed is the 3300 lines expected, plus (664 - 644 =)20 lines of garbage. For a 3750 line page: ImageProcessing reports 4 x bands of 752 lines, then one of 742. The expected 3750 lines print, plus 10 lines (752 - 742) of garbage. It *looks* like when Unidrv splits the page into bands, it's not tracking the actual count when passing the bands to Output. Comments? Suggestions?? I'd rather not do the compression and output to spooler myself, if there's a known fix for this issue. Thanks! -- Joe C. -- J.C. Tag: IFS Driver losck Excel file Tag: 70856
 - 3
 - How to bind the adaptor to ndis. Ok ,I have a problem binding the adapter to ndis driver. Please somebody can look to my code and tell me whats wrong.Thanks !!! It is very important to me to know how to send raw packets. I have c++6. /////////////////////////////////////////////////////////////////// // test1.cpp : Defines the entry point for the console application. // #include "stdafx.h" #include <windows.h> #include <winioctl.h> #include <stdio.h> int main(int argc, char* argv[]) { int copying=0,lol=0,lol2=999,bufsize,pointerull1=0,pointerull0=0,lungimeaaa=0; char output[1000]="",filtredoutput[1000]="",adapterid[524]=""; struct NDISPROT_QUERY_BINDING { unsigned long BindingIndex; // 0-based binding number unsigned long DeviceNameOffset; unsigned long DeviceNameLength; // in bytes unsigned long DeviceDescrOffset; unsigned long DeviceDescrLength; // in bytes }; struct NDISPROT_QUERY_BINDING ndisprot; ndisprot.BindingIndex=0; //Adaptor number bufsize =sizeof(ndisprot); HANDLE hDevice; // handle to the adapter to be examined BOOL validAdapter,bindadadapter; //handle DWORD bytesread,uiBytesReturned; // number of bytes for output buffer //Opening driver with create file hDevice = CreateFile("\\\\.\\\\NdisProt"/* drive to open*/,GENERIC_WRITE|GENERIC_READ, 0, 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0); validAdapter = DeviceIoControl(hDevice/* device to be queried*/,0x12C80C/* operation to perform "Enumerate Adapters"*/,(void*) &ndisprot/*input buffer*/,bufsize/*input buffer size*/,output/*output buffer*/,lol2/*output buffer size*/,&bytesread/*number of bytes returned*/,NULL); /////////////////////////////////////////////////////////// if (!validAdapter) printf("Error\n"); do{ if(strncmp(output+copying,"\x00",1)) strncat(filtredoutput,output+copying,1); copying++; }while(copying<bytesread);//getting adapter id from iocontroldevice data do{ pointerull0++; }while(strncmp(filtredoutput+pointerull0,"\\",1)!=NULL); do{ pointerull1++; }while(strncmp(filtredoutput+pointerull1,"}",1)!=NULL); strncpy(adapterid,filtredoutput+pointerull0,pointerull1-pointerull0+1); /////////////////////////////////////////////////////////// lungimeaaa=strlen(adapterid); bindadadapter=DeviceIoControl(hDevice/* device to be binded*/,0x12C800/*operation to perform "Open Device"*/,(void*) &adapterid,lungimeaaa,NULL,0,&uiBytesReturned,0); if (!bindadadapter) printf("Error not binded %d\n",uiBytesReturned); printf("filtredoutput=%s\nsize=%d\nbytesread=%d\n",filtredoutput,lol2,bytesread); printf("Adapter ID =%s\n",adapterid); CloseHandle(hDevice); printf("Hello World!\n"); return 0; } /////////////////////////////////EOF/////////////////////////////// Tag: IFS Driver losck Excel file Tag: 70852
 - 4
 - Unload what SetupDiCallClassInstaller loaded After disabling/enabling a device with a call to SetupDiCallClassInstaller, my program's memory usage jumps from 900Kb to 9.5 MB (WinXP, according to TaskManager and ProcessXP). Msdn explains: SetupDiCallClassInstaller calls the class installer and any co-installers that are registered for a device or a device setup class. This function loads the installers if they are not yet loaded. The function also calls the default handler for the DIF request, if there is a default handler and if the installers return a status indicating that the default handler should be called. How do I UNLOAD the class installer and co-installers, that are eating my memory? Tag: IFS Driver losck Excel file Tag: 70851
 - 5
 - WHQL Failure during user defined functions I am running WHQL test and I am failing on test 2.2.3. What is happening is that it runs through the Windows functions (1-2048), but once it comes in to test the user defined functions it fails out the test. The nStatus is equal to 0. Do I need to do some kind of check that if it is equal to 0, return STATUS_INVALID_PARAMETER? Thanks for you help. ck Tag: IFS Driver losck Excel file Tag: 70847
 - 6
 - user mode printer drivers We had an existing kernel mode printer driver that we converted to user mode following documentation in the driver kit. The new user mode driver installs and runs correctly on Windows XP and Server 2003. Attempting to install the driver on the Vista beta fails with the following error message: "The driver that you are trying to install is not compatible with Windows Server 2003 family. Please contact the manufacturer for an updated version." Any ideas? Thanks. Tag: IFS Driver losck Excel file Tag: 70845
 - 7
 - Miniport's IOCTL interface performance issue. Hi all, I have written a NDIS 5.0 virtual miniport driver that send and receive packets from a usermode application via Direct IOCTL interface. All seems to be working well, except that the miniport drops packets if it receives more that about 3000/second. I have implemented a receive buffer in the miniport and it is clear that the miniport receive all the packets from the above protocols and queue them accordingly but the IOCTL interface seems to be to slow to handle all of the packets, so the queue overflows. Is there any way to improve the IOCTL interface's performance? Thanks, Amos Tag: IFS Driver losck Excel file Tag: 70836
 - 8
 - Driver design thoughts Yes, I'm a driver newbie... We have an open source kernel driver that needs accurate and high-resolution timestamps in order to stamp communication packets. Then, we have an external reference clock producing these timestamps. The problem is to forward these timestamps to the driver. My plan is to write a new driver that interfaces the clock (with serial based protocol) and exports a method for the existing driver in order to request timestamps when needed. This way the existing driver would stay as intact as possible. Does this sound reasonable to you? As far as I understand, my new driver would not be a real "device driver" representing any device, but a kernel-mode helper library. So, what type of driver it should be? Any other thoughts of architectural design? Thanks Ali Tag: IFS Driver losck Excel file Tag: 70832
 - 9
 - how to map drive letter (eg. H:) to usb (vid, pid)? the problem I encountered : what I know is logical drive letter(assume this drive based on usb) what I want is the serial(vid, pid) of the drive's underlying usb device Can anyone help ? Thanks a lot! Tag: IFS Driver losck Excel file Tag: 70831
 - 10
 - how to install a LM i want to write a inf file.so that i can install a printer with a LM. i write it as follows: LanguageMonitor=%LM% [DestinationDirs] //?? DefaultDestDir=66000 [SourceDisksNames.x86]//?? 1 = %disk1%,,, [SourceDisksNames.ia64]//?? 1 = %disk1%,,, [SourceDisksFiles]//?? PJLMON.Dll=1 [Strings] LM=="Language Monitor,PJLMON.Dll" However,the second time i installed the printer,the pjlmon.dll is not updated. I have to stop the spoolsv.exe and then delete the dll manually. Now I want to install the dll item for the printer from the curren directory to windows(WINNT)\system32 directory.what can i do? thank you - hy ----------------------------------------------------------------------- Posted via http://www.codecomments.co ----------------------------------------------------------------------- Tag: IFS Driver losck Excel file Tag: 70828
 - 11
 - error on CreateDialog thanks for all your hints. In fact,I have an app that implements a dll. the dialog belonging to a class is showed in the win32 ap sucessfully. that is ok! Surely I can create a dialog successfully without register a class. but it seems that is necessary when i want to add a icon for th dialog. it still failed! the differences between my test app and my ddk are: (1) ddk uses unicode, (2) the instance of ddk is the dllmain 1st input parameter,while the instance of my test program is winmain 1st input parameter, BTW,i dont want to use MFC or any class,only api funcs are used. Thanks - hy ----------------------------------------------------------------------- Posted via http://www.codecomments.co ----------------------------------------------------------------------- Tag: IFS Driver losck Excel file Tag: 70827
 - 12
 - Switch off Caps Lock from kernel mode driver Hi, Is there any way in kernel mode driver to check the status of capslock key and turn off if it is ON? I thought of accessing Bios address space 40h:17h for this purpose. But I don't know how to do that in Kernel mode. Please help on how to access 40h:17h address from kernel mode driver. Any other way to do the thing also welcome. I am a newbie. Thanks, Krishna Tag: IFS Driver losck Excel file Tag: 70824
 - 13
 - Installing Unsigned Drivers in Vista Hi, It seems that Vista Beta 2 (Build 5219) no longer allow unsigned driver set to be installed by default. Anyone knows any method to install an unsigned driver set at this stage if I wish to test for compatability? Thanks Thanks. Kee Seng Tag: IFS Driver losck Excel file Tag: 70823
 - 14
 - Thread Safe Is the NdisAllocatePacket and NdisAllocateBuffer function thread safe? Best Regards, -Niranjan Tag: IFS Driver losck Excel file Tag: 70822
 - 15
 - PCL to EMF How can i convert PCL to EMF, is there a way so that i can program this. Similar to this I am keen to know if I could convert Postscript(PS) to EMF with out depending on Ghostscript. Basically i would like to render PCL or PS files in my VC++ programs and try to extract the text from it. I am not bothered about the graphics with in these files and only bothered about the text with in. Somebody please help me with this. Thanks... Tag: IFS Driver losck Excel file Tag: 70813
 - 16
 - PCL to EMF conversion How can i convert PCL to EMF, is there a way so that i can program this. Similar to this I am keen to know if I could convert Postscript(PS) to EMF with out depending on Ghostscript. Basically i would like to render PCL or PS files in my VC++ programs and try to extract the text from it. I am not bothered about the graphics with in these files and only bothered about the text with in. Somebody please help me with this. Thanks... Tag: IFS Driver losck Excel file Tag: 70812
 - 17
 - scsi rescan caching Hi, Regarding the Microsoft own rescan.exe, as found at: http://support.microsoft.com/default.aspx?scid=kb;en-us;308669 I have found this very utility and particulary the CM_Reenumerate_DevNode() call, which is used within to do actual bus rescan, are behaving as if there is some caching involved. Test as follows: 1. run rescan over and over, from command line, as fast as you can (or write a shell script to do it) 2. Observe how long does it take, each time, for rescan to finish You will see the very 1st rescan does take some time to finish while all subsequent are returning IMMEDIATELLY. Then again, after 30 or some iterations, rescan AGAIN takes some time, as if it actually doing something. I made no device additions in that time. Machine was idle. Test is reproducible. Note I did above test with both NORMAL and CM_REENUMERATE_SYNCHRONOUS setting for CM_Reenumerate_DevNode(), same behaviour. Any thoughts on this? Thanks, Robert Tag: IFS Driver losck Excel file Tag: 70808
 - 18
 - A question about EngCopyBits When I implemented the DrvCopyBits function in the mirror driver, I just punted to EngCopyBits call, but unfortunately, I got a blue screen. Is there anything else that I should do before punting it back to EngCopyBits? Could any guru please give me some suggestions? Thanks, Tag: IFS Driver losck Excel file Tag: 70806
 - 19
 - "build" not showing all build - fixed Several months ago, I noted that the DDK "build" utility would in some cases NOT show all errors encountered during a build. I have today found out that this is a side effect of installing the Windows DDK to a path containing spaces. Moving the DDK to a space with no spaces, allows all errors to appear as expected. If anyone is interesting in troubleshooting the DDK build utility, here's a quick way to reproduce it: 1) install DDK to C:\Program Files\Windows DDK 2) drop the 3 files listed below into C:\temp\ 3) Launch a build environment DOS window (in my case Windows 2000 checked) 4) in directory c:\temp, type "build -cZ" ==> The only error shown is an *.obj file missing. The *.log file, however, lists lots and lots of errors. Here are the files I used to reproduce the issue: makefile ========= !INCLUDE $(NTMAKEENV)\makefile.def sources ========= TARGETNAME=temp TARGETPATH=obj TARGETTYPE=DRIVER C_DEFINES=-DNDIS_MINIPORT_DRIVER SOURCES=temp.c temp.c ========= #include <ntddk.h> #include <ndis.h> NTSTATUS DriverEntry( IN PDRIVER_OBJECT DriverObject, IN PUNICODE_STRING RegistryPath ) { return STATUS_SUCCESS; } Good luck! Maybe one of these days the DDK will allow people to use spaces in their paths & filenames.... :-) / Hannes. Tag: IFS Driver losck Excel file Tag: 70804
 - 20
 - uDAPL on Windows? I need to write a driver for a set of PCI-Express boards and there has been a request for supporting uDAPL as the API for interacting with this hardware. The implementations of uDAPL on windows that I have seen appear to be in their infancy and there is a surprising lack of information out there describing what a driver needs to provide for services in order to support this API. Can anyone point me to either some really good documentation or tell me another API that is more "at home" on Windows that would accompliush the same thing (an RDMA type of aAPI). All the uDAPL stuff I have seen has been geared toward Linux support with windows being an afterthought. Thanks, Beverly Tag: IFS Driver losck Excel file Tag: 70799
 - 21
 - PFN_LIST_CORRUPT with P1=9A, W2K3 SP1 Hy All, I've got a PFN_LIST_CORRUPT with P1=9A on W2K3 SP1. This P1 value is not documented in DDK help (DDK V3790). Do someone know more about this? Many thanks in advance, Francois. Tag: IFS Driver losck Excel file Tag: 70798
 - 22
 - Problem writing extension unit plugin. I am writing an extension unit plug-in for a USB video class device. The example that I have used as a template, is the Microsoft provided example at [http://www.microsoft.com/whdc/device/stream/vidcap/USBVid-ext.mspx]. I have experienced quite many problems with this example, the IKsNodeControl described in the example can't be found in any new SDK or DDK, only in DirectX SDK from 2004. Has this interface been removed? I am quite uncertain how I should implement my CreateInstance() method and my QueryInterface() method. Does anyone have some idea or some hint of how I should do? Best regards: Leopold Tag: IFS Driver losck Excel file Tag: 70788
 - 23
 - error on CreateDialog The error code is 6 with GetLastError£¨£©£¬ First i registered a WNDCLASS£¬then I create a dialog¡£ But it failed¡£ My intent is to add an icon for the dialog in a dll. Someone can help me? Thanks. Code: wc.style = CS_HREDRAW | CS_VREDRAW ; wc.lpfnWndProc = (WNDPROC)WndProc ;//callback procedure wc.cbClsExtra = 0 ; wc.cbWndExtra = DLGWINDOWEXTRA ; wc.hInstance = tmp_hModule ; //dllmain input handle when attach process wc.hIcon = LoadIcon(tmp_hModule, MAKEINTRESOURCE(IDI_ICON1)); wc.hCursor = LoadCursor (NULL, IDC_ARROW) ; wc.hbrBackground = GetStockObject (LTGRAY_BRUSH) ; wc.lpszMenuName = NULL ; wc.lpszClassName = szAppName; //defined as TCHAR szAppName[] = TEXT("OPERATIONPANEL"); if(!RegisterClass(&wc)) return FALSE ; hwnd=CreateDialog(tmp_hModule,MAKEINTRESOURCE(IDD_TABLEDLG),0,WndProc); if(hwnd==NULL) { error=GetLastError(); wsprintf(str,L"error=%d",GetLastError()); MessageBox(NULL,str,L"CreateDialog",MB_OK); return FALSE; - hy ----------------------------------------------------------------------- Posted via http://www.codecomments.co ----------------------------------------------------------------------- Tag: IFS Driver losck Excel file Tag: 70787
 - 24
 - Virtual COM port emulation over USB Hi, I need to write a driver which supports virtual COM port emulation over USB (for win2k/XP). Can I make use of usbser.sys provided by Microsoft. Where can i get a complete description of usbser.sys. Does it provide Bulk mode transfer. How Can i add an upper/lower filter to usbser.sys. Thanks in advance. Tag: IFS Driver losck Excel file Tag: 70783
 - 25
 - found solution using OID_802_11_ADD_KEY solve the problem Tag: IFS Driver losck Excel file Tag: 70780
- Next
 - 1
 - FS driver Hi Guys I am created my own file system, i want "Windows Explorer" able to view/edit its file, how can i write a driver for it? Can i use c# to do that? thanks from Peter (cmk128@hotmail.com) Tag: IFS Driver losck Excel file Tag: 70772
 - 2
 - who can give some help about avstream driver. Hi, I have realized the usb camera driver which based on stream class framework,but now I want to re-realize it based on avStream framework. now I have two questions,who can help me. 1. AvStream's advantage to stream class. 2. if I want realize the usb camera driver based on avStream,which sample I can refer in DDK. thank you very much. Tag: IFS Driver losck Excel file Tag: 70770
 - 3
 - problem of providing my own version of malloc/free Due to some reason, I have to provide my own malloc/free/calloc functions so that other parts of the driver are happy. These functions are simply a wrapper around ExAllocatePool. However, when I compile it, the linker complains: "warning LNK4217: locally defined symbol _free imported in function xxxx". This is the free() function: void __cdecl free(void *p) { ExFreePool(p); } How can I get rid of this message? Thanks Tag: IFS Driver losck Excel file Tag: 70763
 - 4
 - sharing memory user mode & virtual video capture driver I would like to make an user mode application, send video to a virtual video capture drivers, based on "testcap" DDK sample. as this the driver send the video to 3rd party software. but I would like to know how to share memory with the drivers, to make my user mode application sending the video to the drivers... thanks, renan Tag: IFS Driver losck Excel file Tag: 70760
 - 5
 - Library to include at linking for FONTOBJ_pifi Hi... Could you please tell me what library I must include at linking for using of FONTOBJ_pifi function ? Thank you, Radu Cosoveanu Tag: IFS Driver losck Excel file Tag: 70755
 - 6
 - Hoooking only part of the FastIo routines Hi In a file system filter - can i hook only part of the fastio routines? and if so - how to fill the FAST_IO_DISPATCH structure? thanks. Tag: IFS Driver losck Excel file Tag: 70751
 - 7
 - Is it possible for the mirror driver does not support DrvBitBlt function? I'm writing a mirror driver based on the DDK mirror driver sample code. I read the documentation at the msdn library, and learned that if a driver manages its own surface, the driver must also, at a minimum, support DrvCopyBits, DrvTextOut, DrvStrokePath drawing functions. I noticed that DrvBitBlt was also in the DDK mirror driver sample code. When I hooked off the DrvBitBlt function, I got a blue screen. I'm trying to avoid implementing DrvBitBlt because of complexity. Could any guru tell if it is possible not to implement DrvBitBlt function in the mirror driver? Thanks, Tag: IFS Driver losck Excel file Tag: 70749
 - 8
 - Problem uninstalling keyboard driver Hi, I've written a keyboard driver for W2K/WXP which ties in with kbdclass and works fine. It happily sits next to a standard Windows keyboard driver in Device Manager. Problem is Device Manager gives no Uninstall option for my driver and DevCon reports "Remove failed" if I try to remove it. I've also written a touchscreen mouse driver which similarly connects with mouclass and sits next to a standard Windows mouse driver in Device Manager. This does have an uninstall option and can be removed using DevCon. Both drivers have a similar structure, but is there anything extra I should be doing in the keyboard driver to make it uninstallable? How should I go about uninstalling it? Thanks, Ade. Tag: IFS Driver losck Excel file Tag: 70745
 - 9
 - AVStream on Win98 Hi all, Help really needed... I have managed to build a AVStream driver for an USB device that runs on all platforms, except win98 se. According to the documentation of AVStream in MSDN, we can run any AVStream driver on any OS as long as the OS has DirectX ver8.0 and above. Exclamation mark is shown in the camera icon in the Device Manager and error code is "The NTKERN.VXD device loader(s) for this device could not load the device driver. (Code 2)". May I know is this problem due to AVStream? Please advise. Thank you very much. Tag: IFS Driver losck Excel file Tag: 70744
 - 10
 - Strange behaviour with USB selective suspend Hello I've connected a usb mouse in combination with our own usb device to the same root hub. Our device supports remote wake-up. The driver for our usb device sends down a request for usb selective suspend. Nothing happens. When I unplug the usb mouse, the system happely invokes the callback routine so the driver sets device power state D2. I find this behaviour a bit odd. Why does the usb mouse prevent our device from going into usb selective suspend? I also replaced the usb mouse with a different usb device but the behaviour remained the same. This is WinXP SP2. The implementation in our driver has passed whql. Tag: IFS Driver losck Excel file Tag: 70743
 - 11
 - how can I map logical drive letter to usb device serial(vid, pid)? the problem I encountered : what I know is logical drive letter(assume this drive based on usb) what I want is the serial(vid, pid) of the drive's underlying usb device Can anyone help ? Thanks a lot! Tag: IFS Driver losck Excel file Tag: 70740
 - 12
 - Crashes to Blue Screen when exiting a Game PerfNet Unable to open the Server service. Server performance data will not be returned. Error code returned is in data DWORD 0. Perflib The open procedure for service "WmiApRpl" in DLL "C:\WINDOWS\System32\wbem\wmia prpl.dll" has taken longer than the established wait time to complete. There may be a problem with this extensible counter or the service it is collecting data from or the system may have been very busy when this call was attempted. Tag: IFS Driver losck Excel file Tag: 70730
 - 13
 - this framework code possible in printer UI extension This is a multi-part message in MIME format. ------=_NextPart_000_0016_01C5CC3C.18D87470 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I'm putting together a proposal for a tool to send a document to PDF = conversion and then onto a content management solution. I'm looking at two different approaches, a conventional add-in, which = first collect some document properties from the user, then sends the = document along with the document properties to Windows service which = uses PDF conversion component and via a Web service to store the = converted PDF to the CMS storage.=20 The second approach, which is why I'm posting to this newsgroup would be = to create a virtual print driver to do the same thing. print driver is = certainly the more elegant approach, and it makes the conversion to PDF = simple or as the conversion component will only need to deal with one = type of input (EMF) A few questions: Is this approach possible? Is it recommended?=20 One of these steps in the process is to present a user interface to the = user to collect some document properties, after a little bit of research = in the DDK, it looks like DrvPrinterEvent is the appropriate place to do = this, no? Is it possible to use managed C++ (C++\CLI) for the = implementation? Clearly I still needs to do a lot more learning about the printer driver = architecture, but answers to the above questions will help me greatly in = deciding which approach to take. Thanks, --Scott W. ------=_NextPart_000_0016_01C5CC3C.18D87470 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2722" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV> I'm putting together a proposal for a tool to send = a document to PDF conversion and then onto a content = management=20 solution. I'm looking at two different approaches, a = conventional=20 add-in, which first collect some document properties from the = user,=20 then sends the document along with the document properties to = Windows=20 service which uses PDF conversion component and via a Web = service to=20 store the converted PDF to the CMS storage. The second approach, which is why I'm posting to = this=20 newsgroup would be to create a virtual print driver to do the same=20 thing. print driver is certainly the more elegant approach, and it = makes=20 the conversion to PDF simple or as the conversion component will only = need to=20 deal with one type of input (EMF) A few questions:     = <FONT=20 face=3DArial>Is this approach possible? Is it recommended? One of these steps in the process is to present a = user=20 interface to the user to collect some document properties,<FONT=20 face=3DArial> after a little bit of research in the DDK, it looks like=20 DrvPrinterEvent is the appropriate place to do this, = no? =20 Is it possible to use managed C++ (C++\CLI) for the = implementation? Clearly I still needs to do a lot more learning = about the=20 printer driver architecture, but answers to the above questions will = help me=20 greatly in deciding which approach to take. Thanks, --Scott W.</DIV></BODY></HTML> ------=_NextPart_000_0016_01C5CC3C.18D87470-- Tag: IFS Driver losck Excel file Tag: 70729
 - 14
 - USB stack gives misleading indications when Polling Interval not 1 I am seeing some incorrect indications from the usb stack (XP SP2) when my device indicates a Polling Interval of 2 on its isochronous endpoint: My hardware has a high speed (not high bandwidth) iso In endpoint; it generates fixed size 1000-byte packets at an interval very slightly over 250uS. I have taken the isousb sample from the 3790 DDK, and adapted it to work with my configuration. Because of the data rate, it seemed sensible to increase the polling interval on that endpoint so as to only poll every other microframe, so I set a value of two. I use the test app (rwiso) to read an amount of data from the device, and the driver output is as follows: IsoPacket[0].Length = 0x03E8 IsoPacket[0].Status = 0 IsoPacket[1].Length = 0x0000 IsoPacket[1].Status = 0 IsoPacket[2].Length = 0x03E8 IsoPacket[2].Status = 0 IsoPacket[3].Length = 0x0000 IsoPacket[3].Status = 0 IsoPacket[4].Length = 0x03E8 IsoPacket[4].Status = 0 IsoPacket[5].Length = 0x0000 IsoPacket[5].Status = 0 IsoPacket[6].Length = 0x03E8 IsoPacket[6].Status = 0 IsoPacket[7].Length = 0x0000 IsoPacket[7].Status = 0 IsoPacket[8].Length = 0x03E8 IsoPacket[8].Status = 0 IsoPacket[9].Length = 0x0000 IsoPacket[9].Status = 0 IsoPacket[10].Length = 0x03E8 IsoPacket[10].Status = 0 IsoPacket[11].Length = 0x0000 IsoPacket[11].Status = 0 IsoPacket[12].Length = 0x03E8 IsoPacket[12].Status = 0 IsoPacket[13].Length = 0x0000 IsoPacket[13].Status = 0 IsoPacket[14].Length = 0x03E8 IsoPacket[14].Status = 0 IsoPacket[15].Length = 0x0000 IsoPacket[15].Status = 0 IsoPacket[16].Length = 0x03E8 IsoPacket[16].Status = 0 IsoPacket[17].Length = 0x0000 IsoPacket[17].Status = 0 IsoPacket[18].Length = 0x03E8 IsoPacket[18].Status = 0 IsoPacket[19].Length = 0x0000 IsoPacket[19].Status = 0 IsoPacket[20].Length = 0x03E8 IsoPacket[20].Status = 0 IsoPacket[21].Length = 0x0000 IsoPacket[21].Status = 0 IsoPacket[22].Length = 0x03E8 IsoPacket[22].Status = 0 IsoPacket[23].Length = 0x0000 IsoPacket[23].Status = 0 So this suggests that every other packet is coming back zero-length. However, when I look at the entire buffer from the user-space app there are no gaps - every piece of data *is* there (and correct) from beginning to end - all 24 packets. The return value from the read() call is 12*1000 yet the whole buffer has in fact been written. I've also used SnoopyPro to examine what the stack thinks the packets contain, and diagrammatically (and very much simplified), this is what I'm seeing (with "." indicating a zero-length packet): According to stack Actually in buffer 0 1 2 3 0 1 2 3 . 4 5 6 7 8 9 A B 8 9 A B . C D E F 0 1 2 3 0 1 2 3 etc This is a problem to me because I will occasionally get genuine zero-length packets (due to the data generation being asynchronous to the usb frames), and I need to be able to detect them. The USBD_SHORT_TRANSFER_OK flag is not set. This only happens when the Polling Interval is 2; when it is set to 1 then the behaviour is as expected (albeit interspersed with genuine zero-length packets, generated by the h/w when it is polled but has no data available) I'm running a free build XP SP2, but with checked versions of ntoskrnl, hal, usbport.sys, usbccgp.sys and usbd.sys (also from an SP2 version). Is it a bug in the usb stack? There is a report of this kind of problem - http://support.microsoft.com/?kbid=837371 - but although it is dated only a few days ago, it seems to be saying that the issue is fixed in SP2; and I have newer versions of all the files indicated (though why don't I have usbccgp.sys - isn't that needed for composite devices??) [I'm having trouble with my Win2K installation at the moment, so I've not had a chance to compare]. In fact, as I repeat the test today to check my results (before hitting "Send"), I'm *also* now seeing an additional effect: a packet with a length of 1000, but contents all zero - but, again, without any loss of data - where there *is* data in the buffer it is continous and valid (the data stream contains a count to help spot discontinuities). What with the results I was seeing yesterday plus this additional weirdness I'm now seeing, I'm wondering if there are still issues with non-one values of polling interval? Anyone got any thoughts? Can anyone at MS confirm whether 837371 really is fixed? Thanks. Tag: IFS Driver losck Excel file Tag: 70727
 - 15
 - Windows Xp and interrupts. I'm writing a driver for programming performance counters in PIV processor. I've wrote bus driver which enumerates devices and allocates resources and function driver which will do main job. I'm having a problem with allocating resources for functional driver. Currently my IRP_MN_QUERY_RESOURCES handling function looks like this: static NTSTATUS HandleQueryResources(PDEVICE_OBJECT pdo, PIRP Irp) { NTSTATUS status = Irp->IoStatus.Status; PIO_STACK_LOCATION stack = IoGetCurrentIrpStackLocation(Irp); KdPrint((DRIVERNAME " (PDO) - HandleQueryRequirements\n")); PCM_RESOURCE_LIST resourceList; PCM_FULL_RESOURCE_DESCRIPTOR frd; PCM_PARTIAL_RESOURCE_DESCRIPTOR prd; ULONG resourceListSize; // // Following code shows how to provide // boot I/O port resource to a device. // resourceListSize = sizeof(CM_RESOURCE_LIST); resourceList = (PCM_RESOURCE_LIST)ExAllocatePoolWithTag (PagedPool, resourceListSize, APICBUS_POOL_TAG); if (resourceList == NULL ) { KdPrint((DRIVERNAME " (PDO) - HandleQueryRequirements: STATUS_INSUFFICIENT_RESOURCES\n")); return STATUS_INSUFFICIENT_RESOURCES; } RtlZeroMemory( resourceList, resourceListSize ); resourceList->Count = 1; frd = &resourceList->List[0]; frd->PartialResourceList.Count = 1; // // Get pointer to first Partial Resource // Descriptor in this FRD. // prd = &frd->PartialResourceList.PartialDescriptors[0]; prd->Type = CmResourceTypeInterrupt; prd->ShareDisposition = CmResourceShareShared; prd->Flags = CM_RESOURCE_INTERRUPT_LEVEL_SENSITIVE; prd->u.Interrupt.Level = 3; prd->u.Interrupt.Vector = 64; prd->u.Interrupt.Affinity = -1; Irp->IoStatus.Information = (ULONG_PTR)resourceList; KdPrint((DRIVERNAME " (PDO) - HandleQueryRequirements: STATUS_SUCCESS\n")); return STATUS_SUCCESS; } But IRP_MN_START device in my function driver doesn't get any resources(either translated or raw). Can anybody explain me haw handle this IRP correctly? And please anybody explain to newbie meaning of Interrupt.Level, Interrupt.Vector fields? How should I implement IRP_MN_QUERY_RESOURCE_REQUIREMENTS handling function? Best Darek Tag: IFS Driver losck Excel file Tag: 70724
 - 16
 - MSVAD Install Hi, When I install MSVAD driver, I need reboot machine to active MSVAD driver. Why should PC reboot after MSVAD Installed? Can I do not reboot to active MSVAD driver? Thanks. Tag: IFS Driver losck Excel file Tag: 70723
 - 17
 - Converting Win2k monolithic printer driver to a Longhorn driver - Installation problems Converting Win2k monolithic printer driver to Longhorn driver - INSTALLATION Problems.. The current monolithic(not using Microsoft Universal Printer Driver Model) Windows printer driver has been converted to "user-mode" and installs/runs fine on Win2k, WinXP, and WinServer2003. However, for "Longhorn Beta1" the following error message is given during an attempt to install the driver: Error Message: "The driver that you are trying to install is not compatible with Windows Server 2003 family. Please contact the manufacturer for an updated version." It appears (according to the following windows log files: setupapi.app.log, setupapi.dev.log) that the installation (via the Add Printer Wizard) successfully copies the driver files to a system location, but immediately after that point, the error occurs and the installation is cancelled. I suspect that when the "loader" attempts to load a driver DLL (toward end of installation), it cannot resolve a reference in the DLL to some Win API function (NOT IN Longhorn), and therefore the DLL is not loaded. Normally, one would get some kind of error message that indicates a particular function could not be found/resolved; but this may not be the case while using the "Add Printer Wizard". I placed calls to "MessageBox(-)" at several "entry-point" functions in the DLLs (like DllMain, DLLInitialize, WinMain, DrvQueryDriverInfo, etc.) but these are NOT reached during installation on "Longhorn"; however, they are reached during installation on the other OS's. Any Ideas? Rudy Tag: IFS Driver losck Excel file Tag: 70716
 - 18
 - USB Problem when using a Philips ISP1521 based hub We are using a TI TUSB3410 USB to Serial chip and recently identified an issue when using this device with a Philips based ISP1521 based Hub. On the USB-IF Developers Discussion Forum a post was made that matches our problem exactly. This post also has a statement that Philips apparently made which states the issue is that the Windows USB host controller driver. Basically Philips states that the host controller driver is not terminating Start Split transactions with a Complete Split transaction. For the original posting see http://www.usb.org/phpbb/viewtopic.php?t=6636&highlight=tusb3410&sid=92ad332153ccee7ed3babd646910e98d. We have been told by TI that Microsoft acknowledges that this is a bug and that it will be fixed in Vista. However in the meantime our customers are experiencing problems when using our hardware with ISP1521 based hubs. My question is, how can we work around this issue? Is there something we can do in our application or in the driver to cause the host controller driver to terminate the split transaction? Thanks in advance for any help in resolving this issue. - Steve - Tag: IFS Driver losck Excel file Tag: 70696
 - 19
 - port monitor UI Hello, I have been trying to find an answer in the newsgroups and MSDN Library for this without success. How does one go about installing a port monitor UI? It's difficult to tell from the library docs whether this can be done either programmtically or through an INF file. Is it at all different from installing a port monitor server DLL? -- Matt Kane m k b a t d i r t y d o t o r g Tag: IFS Driver losck Excel file Tag: 70695
 - 20
 - Installation Issues sample IsoUsb from the DDK As I described before, I want to develop a USB Driver based on the sample on the DDK. I have compiled a driver from that in the 2k3 Server Environment without any error messages and adapted the INF file for the fitting PID&VID of the device. Now I want to check the general communication via the RWISO.exe tool, belonging to that sources. First failure is, that the driver under 2k can be installed not until ONE "INF contains no information on my hardware" failure occurs. I have the paragraph out of the setupapi.log here. It says: @ 11:26:53.424 : Die INF-Datei c:\usb\sys\objchk_wnet_x86\i386\boschusb.inf konnte nicht geladen werden. Hardwarekennungen werden gesucht: usb\vid_0452&pid_0100&rev_0001,usb\vid_0452&pid_0100 Kompatible Kennungen werden gesucht: usb\class_ff&subclass_ff&prot_ff,usb\class_ff&subclass_ff,usb\class_ff Die Dateien c:\usb\sys\objchk_wnet_x86\i386\*.inf werden aufgef=FChrt. @ 11:26:53.424 : Ge=F6ffnete INF-Datei "c:\usb\sys\objchk_wnet_x86\i386\boschusb.inf". @ 11:26:53.424 : Die Datei c:\usb\sys\objchk_wnet_x86\i386\boschusb.inf wird unter Verwendung des Schl=FCssels boschusb.inf im Katalog - =FCberpr=FCft. @ 11:26:53.987 : Die Datei wird =FCberpr=FCft, die mit folgendem Fehler fehlgeschlagen ist: Fehler 0x800b0003: Das f=FCr den Antragsteller angegebene Formular wird vom angegebenen Vertrauensanbieter nicht unterst=FCtzt oder ist ihm nicht bekannt. @ 11:26:53.987 : Die Datei (c:\usb\sys\objchk_wnet_x86\i386\isousb.inf) ist nicht digital signiert. Das Treiberdatum wird ignoriert. @ 11:26:53.987 : USB\VID_0452&PID_0100 in c:\usb\sys\objchk_wnet_x86\i386\boschusb.inf gefunden; Ger=E4t: I82930 Controller; Treiber: Intel I82930 Controller; Anbieter: Intel; Hersteller: Microsoft; Abschnitt: ISOUSB.Dev @ 11:26:53.987 : Abschnittsname: ISOUSB.Dev @ 11:26:58.753 : Ger=E4tinstallationsfunktion: DIF_SELECTDEVICE. @ 11:26:58.753 : Klasseninstallationsprogramm abgeschlossen. Die Dateien c:\usb\sys\objchk_wnet_x86\i386\*.inf werden aufgef=FChrt. @ 11:26:58.753 : Ge=F6ffnete INF-Datei "c:\usb\sys\objchk_wnet_x86\i386\boschusb.inf". @ 11:26:58.753 : Die Datei c:\usb\sys\objchk_wnet_x86\i386\isousb.inf wird unter Verwendung des Schl=FCssels isousb.inf im Katalog - =FCberpr=FCft. @ 11:26:58.753 : Die Datei wird =FCberpr=FCft, die mit folgendem Fehler fehlgeschlagen ist: Fehler 0x800b0003: Das f=FCr den Antragsteller angegebene Formular wird vom angegebenen Vertrauensanbieter nicht unterst=FCtzt oder ist ihm nicht bekannt. (Sorry for German log) The identification of the device was correct, the driver was chosen, but it says the inf-file could not be loaded. (Again, only the first time, I choose this inf-file. The second time it works except the copy of the inf file in %WINNT%\inf) I also analyzed newsgroup postings corresponding the error codes 0x800b0003. I'm not sure if the standard-"server=3Dside"/"client=3Dside"-reply fits to my case. Appreciate your help! Tag: IFS Driver losck Excel file Tag: 70692
 - 21
 - Several problems building the DDK USB-Drivers Examples under W2k BE Hello folks, I beg you to forgive my very little skills in developing drivers. So I'll report my problems right from the start and how I tried to solve 'em. I'm about to develop a USB-driver that implements Bulk-, Interrupt-, Isochronous Transfers. Getting things started, I intended to build the isochronous USB-Drivers from the latest DDKs (3790 & 3790.1830) and communicate with the self-developed device. I'm working on a x86, W2K plattform and because of upward-compatibility on a x86 XP. On both platforms I got the warning, that the existing sample would not be valid for the current OS target. I changed the makefile in looking after a platform >= 0x500, i.e. Win 2k. But problems went on. While the Windows Server 2003 BE builded the driver reliably, the Win2k BE brings up an error C1083: Cannot open include file 'usbbusif.h'. BUILD: Compile errors: not linking c:\usb\sys directory. I looked after the .h file and it appears in %WINDDK%\3790\inc\ddk\wdm\wnet and ...\wxp but not in the adequate w2k-dir. I copied the missing file(s) in ...\w2k but in the aftermath over 700, mostly syntactic errors occured while compiling. The syntax is correct. This sounds clear to me 'cos WNET-Build works fine. I restored the original dirs of the inc\ddk\wdm... I followed some tips in the newsgroup. Although I have no spaces in between dir- or file-names the error still occurs. I have no errors in compiling the test-programs to the usb-drivers of the ddk. I've consulted the DDK-docs, the newsgroups and Walter Oney's 'Programming the WDM 2nd ed.', but none could take me on the fast lane. Now YOU are my only help and I appreciate that very much. BW Tag: IFS Driver losck Excel file Tag: 70687
 - 22
 - Does IPMI driver support BT interface Hello, Our BMC provides both BT & KCS interfaces to the host. I have following questions in regards to Windows IPMI driver: 1. Does it support BT interface? I only see reference to KCS interface support in the documentation. 2. If it does support BT interface, can an application specify an interface (whether KCS or BT) for sending a command to BMC? 3. Can IPMI driver accept simultaneous commands from multiple callers and internally serialize these commands & responses?Does driver allow an application to register to receive IPMI commands from BMC and get event notification once such a command arrives from BMC? (Opposite of normal behavior, apps/Host send the IPMI commands to BMC). Linux OpenIPMI driver allows doing so. I will sincerely appreciate any help on these questions. Best regards, -Sanjeev Tag: IFS Driver losck Excel file Tag: 70686
 - 23
 - Question for Microsoft Hi, I got a email from "epp at microsoft.com", I got some steps to register myself. But when I get to the second page, I get, enter the pin provided by your sponsor, I know of any such pin or a sponsor. The end of email says "don't reply to this to this email as it is not monitored". So I am wondering if it is a spam email. Has anyone here got any such email? Thanks Vipin Tag: IFS Driver losck Excel file Tag: 70681
 - 24
 - how to use selective suspend in BDA driver I am write a BDA driver for (DVBT) USB device and want to support slective suspend. I reference sample code of bulkusb in DDK and add "SubmitIdleRequestIrp" to my driver. but it can not have any respond to my driver(IdleNotificationCallback and IdleNotificationRequestComplete no response). Is the device object set wrrong or something ?? thank!! Tag: IFS Driver losck Excel file Tag: 70678
 - 25
 - printf(), _tprintf(),don't output to console Hi all, I am having a weird problem. None of my programs display any printf messages. Programs runs fine and exits normally, but I don't see any output messages. But in windbg, I can see that the printf statements getting executed. Is there anything obvious I am missing ? Appreciate your help. Am I linking to some wrong libs or missing some device mapping or something ? thanks Code sample : int __cdecl wmain(int argc, WCHAR* argv[]) { HRESULT hr=S_OK; WCHAR ch; enum NetClass nc=NC_Unknown; // use simple cmd line parsing to get parameters for actions // we want to perform. the order of parameters supplied is significant. static const WCHAR c_szValidOptions[] = L"hH?c:C:l:L:i:I:u:U:vVp:P:s:S:b:B:q:Q:"; WCHAR szFileFullPath[MAX_PATH+1]; PWSTR szFileComponent; _tprintf(L"in wmain\n"); fflush(stdout); Running : ( I don't see "In wmain" msg) H:\CTO\windows\AOS_VPN\kernel\source\i386-windows-shim\ndis\installer\win2k\netcfg\objchk_w2k_x86\i386>.\snetcfg.exe H:\CTO\windows\AOS_VPN\kernel\source\i386-windowsshim\ndis\installer\win2k\netcfg\objchk_w2k_x86\i386> Tag: IFS Driver losck Excel file Tag: 70662

Hi,
I've a FS Driver working as MiniRDR...
It works fine with all files type but it fails on Excel file.
Opening a remote "Excel 2003 only" file it always reports that file has been
modified by other user and prompt me to save with a different
name/overwrite...
It only happens on XP + Office 2003 !!!
I know it's not enought but maybe someone might help...
I'll start with a remote debug on driver as soon as I wont got any suggest...

Thanks
Ale

Top